HP ENVY 14-k010us Windows 7

Similar Questions

• Envy 17 - j020us Windows 7 drivers missing

  Hello

  I just bought a HP Envy 17 - j020us today. It came stock with Windows 8 is installed and I have, for my own reasons, decided to install Windows 7 above. Long story short, the installation has worked, for the most part. The only problem was that I was missing some drivers. I searched and found http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ENVY-17-j020us-windows-7-driver... which was very helpful. However, there's still about 3 pieces of material that is not installed, the drivers with the network controller. I have attached hardware IDS and compatible IDS is available upon request for any "missing" material below. Can someone help me find the drivers?

  Network controller - hardware ID:

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086

  PCI\VEN_8086 & DEV_0887 & CC_028000

  PCI\VEN_8086 & DEV_0887 & CC_0280

  Feature 'Unknown' - hardware ID:

  USB\VID_138A & PID_0050 & REV_0060

  USB\VID_138A & PID_0050

  Feature 'Unknown' - hardware ID:

  ACPI\INT33A0

  * INT33A0

  Any help would be appreciated. Thank you

  Hello

  Please try:

  1. network: http://ftp.hp.com/pub/softpaq/sp57501-58000/sp57976.exe

  2 validity sensor: ftp://15.217.49.73/pub/softpaq/sp45001-45500/sp45050.exe

  3 Please try: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20866

  Kind regards.

• HP Envy 15-ah100na: Windows 7 on HP envy 15-ah100na network problem

  Hello

  I installed Windows 7 on my HP Envy 15-ah100na laptop that I didn't like Windows 10. I now cannot connect to wireless or wired as the laptop appear to have no ethernet controller or the network is installed.

  Someone at - it a link to where I can download the drivers for the network controllers?

  Thank you.

  You are the very welcome.

  Here are the drivers wireless and bluetooth from W7 for this model of the wlan card.

  This package contains drivers for the Intel Wireless LAN card of supported models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp76001-76500/sp76279.exe

  This package contains the installation package driver for the Bluetooth of Intel in the laptop models running a supported operating systems.

  http://ftp.HP.com/pub/SoftPaq/sp77001-77500/sp77324.exe

• HP envy 700-414: HP Envy 700-414 Windows 7 driver network controller says I don't meet the minimum requirements

  I recently installed Windows 7 on my hp envy 700-414 and missing a lot of pilots. A user by the name of banhiem gave me a link to download the drivers of a 700-230 hp envy. After I did it, I clicked on another link, it gave me to install the Realtek network controller. Whenever I tried to install the driver, it would tell me that I did not meet the requirements. Other drivers work fine now, except the network controller. The steps on how to fix this error would be greatly appreciated.

  Hello:

  See if this card wireless driver works...

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated in the supported models that run an operating system supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70888.exe

• HP Envy 17-n009a: windows 10 hp envy 17-n009a

  The Integrated Intel Graphics HD5500 reports as being compatible with the blu - ray, (it is not possible to pass the 940 m Nvidia on this machine).

  But the driver of Windows 10 Intel HD5500 reports as not not compatible?

  (Using the latest driver on the HP download site).

  SDF15,

  Thanks for the suggestion, but I've made some progress today.

  If I select the integrated graphic card driver, Adviser of Cyberlink Blu - Ray runs using the Nvidia 940 M driver card and the driver reports as support Blu - Ray.

  I had tried previously to run this test by selecting the NVIDIA processor high-performance and driver as reports not supported, which is a strange result.

  Compliance IHE Cyberlink Blu - Ray test only works if the option of integrated graphics driver is enabled.

  I also tried this test using the Intel HD5500 driver and the driver also failed the test of conformity of Blu - Ray. Even if the graphics card reports as Blu - Ray compatible.

  Using the graphics driver integrated all key criteria now give a pass (I'm running with an external USB3 Blu - Ray drive as this machine is equipped with a DVD - RW).

  Even if all the criteria now pass, PowerDVD 15 gives the error 80040111 classic that is usually reported if the machine is not HDCP.

  I provide Cyberlink to see why the HP Envy 17 - n009a is unable to read blu - ray, even if it passes all the criteria of the Blu - Ray Advisor.

  Thanks for your suggestion. Furthermore, Windows 10 940 M Nvidia driver on the HP site for this laptop gives error file corrupted during extraction. I have raised a case with HP about this.

• laptop HP envy 17 TS: windows driver 10 hp truevision hd for youcam?

  I see I'm not the only one with this problem.  Win 10 update seems to have deleted the driver for my webcam.  I tried to reinstall youcam, no luck.  Has anyone fixed this yet?

  Yay!   Solved!   I have a HP Envy touch screen.  He was originally with victory 8.1 and some delivered the software, which included 6 Youcam, the software to use the built in HP Truevision webcam.  I have not upgraded to win10 no problem.  Then I started having problems with my Start menu and programs it does not.  I could do a click on a few of them, but just click on them to open them did nothing.  I set up with it for a little while and then get frustrated enough to reinstall windows.  I think that I have the place in improved, or refresh - one who starts as new windows and records everything you had in the Windows.Old folder.   When I did this, all my software group has been deleted, including Youcam.   A few weeks later my Start menu stop working again and I had to do the win10 reinstall again.  I don't know what option I did the installation with the second time, but my file to win.old has now disappeared, as well as all the myself programs installed.  Now the webcam did not work.  I downloaded another version of Youcam - my version of software was not free to download and I wasn't about to pay for something that was initially provided with my computer for free, and I had no idea of what I could do or who to call to do not have to pay for it again.  I think it was 2 Youcam.   It was impossible to capture images.  The little light next to the camera, indicating that he was working, so I was sure that it was not a hardware problem.  When I looked in the settings I coulkd see she was using the HP Truevision webcam.  It just did not work.  I tried to make updates, Win10 and Cyberlink.  I uninstalled the webcam, reinstalled, tried to roll back the driver, all that jazz. That didn't fix it.  I looked on the Forum and found other people had similar issues, but I saw none that was remidied it.  Something about the embedded version of Youcam seems vital for the webcam not work at all.   I scoured my hard drive and found in my Program Files (x 86), my Cyberlink folder still had a Youcam6 record.  And the .exe program!   I ran it... and he did the same error "unable to capture.    I think that's when I posted in the forums here.  I was frustrated and doesn't bother with it more until yesterday.  I decided to try once more.   I ran Youcam6 (had to go again in Progran files (x 86) to do, but this time, I made a shortcut).  Same mistake.  I went into the Device Manager and uninstalled the Hp Truevision webcam.  Ran Youcam yet again, no camera detected.  With Youcam always on I went back to the Device Manager and search for new devices and immediately returned to the Youcam window and now it says "we have detected you have Hp truevision webcam, you want to use this device?  I clicked on ok, the box of image capture flashed different colors for a second, then was filled with the image of the room behind me and myself.  It worked!   Just in time, too.   My next idea was to see if drop shot it would help.

• ENVY dv6-7211tx: Windows 8 for Windows 7 (x 64) "readers are.

  Hello support,

  Due to some compatibility issues with some of my frequently used programs, I decided to move to the bottom of Windows 8 (x 64) back in Windows 7 x 64. Having already made a recovery DVD media, I proceeded to set up the BIOS/UEFI to install Windows 7 from my USB flash drive.

  -Support of Legacy Boot enabled

  -Automatically disabled Secure Boot

  -Chip USB 3.0 Pre-os on 'Auto '.

  -Set the boot priority features:

  + UEFI - floppy USB Flash Drive boot order

  + Legacy - floppy USB Flash Drive boot order

  -Settings saved and left the setup of BIOS

  -Confirmed UEFI setting changes ("press 3010 + Enter to confirm ')

  -Options boot devices entry (F9) to select the boot device

  -Windows 7 installation begins

  When you select "Custom Setup" from the page of installation of Windows 7 offers the 'Upgrade' and 'Custom' option, I'm headed to the hard drive options page (where the user can change/delete/create disk partitions).

  Here, the computer indicates that "no hard disk has been found", and I need to install a driver or to complete the installation.

  In my attempt to solve the problem, I tried:

  -Deactivation of Intel from fast in the BIOS

  -Remove the recovery partition HARD drive

  If you can identify what I am doing wrong or have solutions to this problem, I would be very happy.

  Thank you.

  EDIT: Here are my computer specs-

  ENVY of HP dv6-7211tx

  Intel i7-3630QM

  8 GB of DDR3 memory

  Internal hard drive 1 TB

  Windows 8 x 64 (NOT 8.1)

  Current DVD player

  Specifications of USB media-

  16 GB SanDisk Cruzer flash drive

  Hello:

  Normally this works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 2101 & DwnldID = 23060 & Keyword = Intel + rapi...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• 6 - 1220tx envy: drivers for windows 10

  I expect my desire 6-1220tx for windows 10 drivers and the drivers are not yet available.

  product: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-6-Ultrabook/5330919/model/5361015

  I would say it might be time to offer you an upgrade that your machine does not meet the specifications?

• Envy 15: 10 Windows problems

  Since the installation of Windows 10 my wifi Envy 15 is incredibly slow to render computer useless for Internet usage.  Is there a download to fix this?

  My touchscreen is once more functional.  I can't see or access Microsoft Edge and file Explorer is more listed in my Start menu, but the computer works fine otherwise.  High speed works well again.

• HP Envy 15 Notebook PC TS: Problem sound Intermittent HP Envy 15 TS / Windows 8.1

  Specifications of the computer:

  HP Envy 15 Notebook PC TS

  Product # E1P05AV

  8.1 Windows 64-bit

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  2 x 8 GB of RAM

  Map of KBC Version 93.52 system 1963

  Graphics device 1: NVIDIA GeForce GT M 740 V.10.18.13.5435

  Graphics device 2: Intel Graphics HD 4600 V.10.18.10.3304

  Audio: IDT High Def Audio CODEC / pilot: stwrt64.sys V.6.10.6491.0

  Question: In the past months, my sound will go off randomly automatically.  If I close the lid and let the computer in to sleep mode or if I restart the computer, the sound comes back.  When the sound disappeared, the volume buttons on the keyboard, so to work with a lag and the mute on the keyboard does not work.  Try to use the sound test, or even navigate the tabs in the Properties section of speaker to accuse also considerably by the sound does not work.

  I noticed other things: I was watching a youtube video when the sound came out, I left the chrome tab that I used for the video and the sound comes back a few seconds later.  He then disappeared a few seconds after I opened a new tab and returned to watch the video.  I had also the same thing happens with the help of a video editing software - quit the application, sound came back, returned to the software, sound went out after a few seconds.  I also had both sound back after going to the speaker properties - Advanced tab and switch format, by selecting the test button and clicking on OK when a message saying "the sound system is in use, taking the test can cause the application to fail" (or something similar).

  I tried to use various utilities for troubleshooting when the problem occurs - the find and troubleshooting audio fix is no problem AND the device is listed as working properly in Device Manager.  I've uninstalled and reinstalled the latest drivers for the IDT HD Audio CODEC several times - no help.  In addition, the problem has been resolved not when I converted briefly to Windows (back to windows 8.1) 10.  In addition, I tried to use the other pilot of "High definition Audio Device" in place and place of the IDT CODEC, but the same problem happened - sound turns off randomly until I rebooted or put my computer to sleep.

  I'm pretty computer - savy but I can't seem to understand what the problem is.  It doesn't seem to be a hardware problem or the sound would probably not come back so quickly or clearly as it does...

  One last piece of information: I noticed that the first time that I reinstalled the Windows audio 24/06/2015 - and also several updates were installed on the 23 & 24 June - watching these updates to see if they are the cause of the problem.

  My father had a speaker bluetooth for Christmas - I tried it out on my computer because it works completely independently of my sound card and it was working fine.

  I bought one of my own for $30 at target - Jam Classic Wireless Speaker - and now I have wonderful sound.

  Does not resolve the issue of the root, but the problem is solved!

  I'm just upset that HP gave me the such a card its crappy that it only lasted 1 1/2 years before give me questions, just long enough to ensure that the warranty expires...

• Update portable touchsmart HP Envy 15 after windows 8.1 how to remove old files

  I have new envy Touchsmart 15 Notebook PC, I've updated to 8.1, how can I delete old files, as suggested

  Hello

  See the Microsoft document on the following link.

  http://Windows.Microsoft.com/en-GB/Windows-8/how-remove-Windows-old-folder

  Kind regards

  DP - K

• HP ENVY M6-1106er: Windows 8 Pro hang up to begin after adding Hyper-V role

  Hello.

  Have a problem with HP ENVY M6-1106er

  After the OEM Win8 upgrade to the Pro version, I added the Hyper-V role for my system and restart the laptop.

  After the restart boot OS freezes on the screen with the HP logo and rotating circles.

  If I disable AMD Virtualization in the BIOS - system starts, but the hypervisor does not work.

  With virtualization enabled in the system BIOS will not start with the Hyper-V role installed.

  Help, please.

  Hello Sir,

  Here's what you need to do.

  1. enter in the BIOS setup and define virtualization as being disabled and reboot the system.

  2. after starting windows 8, enter the control panel and remove the bluetooth driver.

  3. download and install Ralink Bluetooth driver 9.2.101.10 version (SP59632)

  4. restart the system and reactivate the virtualization technology.

  I hope this helps.

• HP Envy 750se: reinstall Windows 10 - issue of drivers of recovery/HP

  I recently bought a HP Envy 750se desktop PC.  It came with W7 Pro and I upgraded to W10 Pro.  Because of some problems I created when I transferred programs on this computer from my old computer, I now intend to do a clean reinstall of the W10 Pro.  I basically understand the generic steps I must follow to do this, but my question is what I would do (if any) regarding the HP recovery partition.  (FYI, the operating system and recovery partition are found on my SSD of 256 GB.)

  I have not yet created a recovery disk... but of course I can do it.

  If I do a clean reinstall of the W10 can I install HP, etc. of the partition recovery or disk drivers?  And if so, how is that done?  Does make a difference that this PC had initially W7 Pro during the creation of the recovery partition?

  My main concern is that when I reinstall W10, I don't want to create unnecessary problems.

  Thanks for any help.

  Ken

  Because you went to 10, you can't make your recovery now disks, and access to the recovery for purposes of recovery partition is broken by the upgrade also.

  10 Windows will have all the drivers.

  You can order a support of recovery HP Windows 7 below, or call HP on the phone to order 1-800-474-6836

  http://support.HP.com/us-en/document/bph07143

  If HP has more recovery media for your model, order them here

  http://www.computersurgeons.com/default.aspx

  .

• HP ENVY Notebook PC m6: HP ENVY Notebook PC Windows 10 - neck of simple questions m6

  The evening

  HP ENVY laptop PC_v 6.0.100.272 m6

  Since the upgrade to Windows 10 SimplePass was extremely hit and Miss.  On the odd occasion, it works fine, but most of the time this isn't...

  I reinstalled Pass Simple, also tried the repair software function, but also ensure that Windows journal is checked.  I'm running out of ideas!

  Current issues:

  Windows Journal-does not work.

  Website Log - I drag the player and get the following message "Pause verification of fingerprints.

  HP Simple Pass App - same error message as above

  Appreciate advice and guidance...

  Thank you

  Tim

  Hi @T_LONG,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY laptop m6 and have them with software for Windows 10 fingerprint reader. Here is a download for the reader of fingerprints for Windows 10. This download sp71729.exe should work for you. I would like to uninstall the version you have and reinstall this version.

  You may need to check that the Simplepass is enable biometric support .

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Envy dv7: SimplePass Windows 10 Finger Scanner does not

  I installed Windows 10 months. I recently installed a "critical" update  After the installation of the system, my icon 'start' at the bottom left of my screen don't work anymore. My SimplePass is no longer turned on or worked.

  I did a system restore on the eve of the critical update.   I still can't use SimplePass.

  Is this a known bug?  Any suggestions?

  Thank you.

  HP ENVY dv7 Notebook PC model system

  System Type x 64-based PC

  System SKU B6B75AV

  Processor Intel Core i7-3630QM CPU @ 2.40 GHz, 2401 Mhz, 4 Lossnay 8 logical processors

  BIOS Version/Date Insyde F.29, 10/03/2013

  SMBIOS Version 2.7

  Embedded Controller Version 52.24

  UEFI BIOS mode

  PCR7 Configuration binding is not Possible

  Windows C:\WINDOWS directory

  System directory C:\WINDOWS\system32

  Boot Device \Device\HarddiskVolume2

  Hardware Abstraction Layer Version = "10.0.10240.16392".

  Physical memory (RAM) installed 12.0 GB

  11.9 GB total physical memory

  9,08 GB available physical memory

  13.7 GB total virtual memory

  10.7 GB available virtual memory

  I typed "SimplePass" in research on the information system, and this is what was posted:

  Path C:\ProgramData\Oracle\Java\javapath; C:\Program Files (x 86) \HP SimplePass\x64; C:\Program Files (x 86) \HP SimplePass\; C:\Program Files (x 86) \NVIDIA Corporation\PhysX\Common; C:\Program Files (x 86) \Intel\iCLS Client\; C:\Program Files\Intel\iCLS Client\. C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Windows Live\Shared; C:\Program Files\Intel\Intel (R) engine management Components\DAL; C:\Program Files\Intel\Intel (R) engine management Components\IPT; C:\Program Files (x 86) \Intel\Intel(R) Components\DAL to engine management; C:\Program Files (x 86) \Intel\Intel(R) Components\IPT to engine management; C:\Program Files (x 86) \Intel\OpenCL SDK\2.0\bin\x86; C:\Program Files (x 86) \Intel\OpenCL SDK\2.0\bin\x64; C:\Users\Sally\AppData\Local\Smartbar\Application\;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\

  Hello @SymKat,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the fingerprint reader and wanted to help!

  Try uninstalling the driver and let your search system to a compatible driver.  You can use this link to help you, if needed: how: install and update drivers in Windows 10

  If you're still having problems, then try to review the following document and let me know how it goes: HP Notebook PC - a (Windows 8) fingerprint reader troubleshooting

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!