HP ENVY 15-j050tx Notebook PC: can I partition Windows (c :)) by car?

Similar Questions

• HP ENVY 17 Notebook PC: Can't activate Windows 8 Pro after a factory reset (hard drive reformatted).

  Hello:

  I had to make a drastic clean the C drive of my ENVY 17 laptop and did a Factory Reset. I was able to reload Windows 8 Pro to my USB stick recovery.

  However, Windows 8 Pro cannot be reactivated indicating that the product key is invalid or blocked. I understand that this is due to having the OS completely cleaned and formatted drive.

  My questions are:

  1. Will be the HP (which is available on order) recovery disks be able to help solve the situation described above?
  2. It will allow me to reactivate my Windows 8 Pro?
  3. Will the recovery be HP discs/media contain or are marked with the correct Windows product key?

  Thank you

  Rico.

  Solved! HP technical support took care of me Thank you so much.

• HP ENVY m6-n113dx Notebook PC: new installation of Windows 8 on HP Envy and with problems of drivers.

  I have a laptop HP Envy M6 and it came with Windows pre-installed on it 8.1. I always do a new installation of Windows, whenever I have buy a laptop that I hate all the bloatware and stuff which they pre-install on it.

  Unfortunately, when I did, I found that the drivers on the HP website do not work for some things, especially my wi - fi.

  In Device Manager there are three things that make their appearance as having a problem:

  Network controller:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

  Unknown device:

  ACPI\VEN_HPQ & DEV_6001

  Unknown device:

  ACPI\VEN_HPQ & DEV_6007

  If anyone can provide me with some drivers work, I would be incredibly grateful. I called HP and they told me all I can do is to pay $40 for a CD delivered to me so I can reinstall the version of bloatware, and I really want to do. I want to use my real version of Windows 8 and not pay for something I don't even want.

  Thank you!

  Nevermind, I fixed it myself by reading old son of Paul_Tikkanen

  I used http://www.pcidatabase.com/index.php

  and found the diver that I needed, and now I don't have to pay $40 for the version of bloatware.  Yay!

  Thank you Paul!

• HP ENVY m6-1218tx Notebook PC drivers downgraded to windows 7

  Please can you em what drivers I need for the ID of following equipment:

  (1) 4 ID for this device (don't know why)

  -PCI\VEN_1002 & DEV_6840 & SUBSYS_18A5103C & REV_00

  -PCI\VEN_1002 & DEV_6840 & SUBSYS_18A5103C

  -PCI\VEN_1002 & DEV_6840 & CC_030000

  -PCI\VEN_1002 & DEV_6840 & CC_0300

  (2) where 4 ID for this one camera as well (don't know why)

  -PCI VEN_8086 & DEV_0166 & SUBSYS_18A5103C & REV_09

  -PCI VEN_8086 & DEV_0166 & SUBSYS_18A5103C

  -PCI VEN_8086 & DEV_0166 & CC_030000

  -PCI VEN_8086 & DEV_0166 & CC_0300

  Hello:

  For your model, you can use all the W7 x 64 drivers and software the m6t-1000.

  DO NOT USE ANY BIOS OR THE FILES OF THE FIRMWARE OF THIS MODEL ON YOUR

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275635#N2249

  Like David posted, you only use the AMD driver that will install the drivers for the AMD and Intel GPU.

• I can't open windows live a care.__WinSSUI.exe Application Error__failed to initiate properly 0xc0000135

  Cannot open Windows OneCare. Application error.

  Blinkermqan,
  Check this thread as it covers the error you see.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ENVY m6 - 1188ca Notebook PC: Bluetooth, network controller, PCI device & amp; Unknown device drivers is not available

  HP ENVY m6 - 1188ca Notebook PC

  64-bit Windows 8

  Hardware ID:

  1 Bluetooth controller

  PCI\VEN_0814 & DEV_1288 & SUBSYS_18AC1034 & REV_00
  PCI\VEN_0814 & DEV_1288 & SUBSYS_18AC1034
  PCI\VEN_0814 & DEV_1288 & CC_0D1100
  PCI\VEN_0814 & DEV_1288 & CC_0D11

  2. network controller

  PCI\VEN_1814 & DEV_2290 & SUBSYS_18C8103C & REV_00
  PCI\VEN_1814 & DEV_2290 & SUBSYS_18C8103C
  PCI\VEN_1814 & DEV_2290 & CC_028000
  PCI\VEN_1814 & DEV_2290 & CC_0280

  3. Pci device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A6103C & REV_01
  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A6103C
  PCI\VEN_10EC & DEV_5289 & CC_FF0000
  PCI\VEN_10EC & DEV_5289 & CC_FF00

  4. unknown device

  ACPI\VEN_HPQ & DEV_0004
  ACPI\HPQ0004
  * HPQ0004

  Hello:

  Try these drivers...

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_148570_1 #tab1

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_147890_1

  Dev PCI:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp58542.exe

  HPQ0004:

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

• HP ENVY 14-1150ca Notebook PC: HP Envy 14 GFX card is toast. It can be replaced?

  Hey guys,.

  I have a HP ENVY 14-1150 laptop ca and the graphics card which is a Mobility Radeon HD 5650 failed on me.

  Is it possible to replace the graphics card in my notebook and the replacement of the card is still available for purchase?

  If it is not available is it an alternative that might work?

  Money is tight right now so I can't afford a new pc which is obviously the best solution here.

  Thanks in advance for your help.

  Mike

  Hi @MikeManning

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question on your HP ENVY 14-1150ca Notebook PC and issues with the ATI Mobility Radeon HD 5650. You can disable the device in Device Manager. You will be able to use the Intel graphics on your system.

  Here is some information switchable graphics or bi - GPU. The graphics are attached to the motherboard so not replaceable.

  I hope this helps.

  Thank you.

• HP ENVY 17-j011sg Notebook PC: HP ENVY 17-j011sg based free spare battery parts

  Hello

  I'm very angry because I need to change the battery (security expited in January 2016) and in all the links of 1000 HP, I can't find the number. HP could make it more complicated, but there is no way.

  At the end of the spare parts site https://parts.hp.com/ there is no battery number to buy. I need to buy the keyboard too, because there is missing it B... and I can't find my product number.

  One could look at which is the number of spare parts to buy:

  Keyboard and batery:

  Modellnr. : E8P11EA
  
  Seriennr. : [Personal information]
  
  HP ENVY 17-j011sg notebook PC

  In the end, I have a very bad image of this structure (if I need to buy another laptop, you can be sure that I won't buy HP).

  Thank you

  (if someone can tell HP that is really not easy for the user, might be nice)

  Spare part number

  710417 001

  Description:

  6 cell, 62WHr 32.8AH Li - ion

  Please select 3 Illustrated catalogue of spare parts under the table of contents.

  http://h10032.www1.HP.com/CTG/manual/c03922401

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Short hard drive DST fail – HP ENVY m6-1155eo Notebook PC

  Hello

  I'm laptops: HP ENVY m6-1155eo Notebook PC, I use Windows 8.1 64-bit
  
  My hard drive is causing my computer to freeze and a lot of blocking problem, which makes my computer unusable because I use it for audio work and a LIVE audio work. So I checked it with the disk self-test
  and he got this:
  
  Failure ID: GLG8XX-6A270T-XD7X1F-60UM03

  did some research and I couln can't find anything. What it means? Do I have to replace the HARD drive?

  Thank you
  ALF

  Yes, the hard drive must be replaced. If you are still in warranty HP will send a replacement. If it is not in warranty, you can buy a SATA notebook hard drive retail. Don't forget to get one with a capacity at least as large as the original 750Go hdd to use HP recovery discs to reinstall your operating system and software. It may be more grand, but of no small ability.

• HP ENVY 17-j005tx Notebook PC, AccelerometerSt.exe - open pop - start up of the system error

  Hello

  I use a HP ENVY 17-j005tx Notebook PC with the latest installed Windows 8.1.

  Whenever I start my computer, I get the following pop-up message:

  "AccelerometerSt.exe - system error - cannot start the program becaue mfc110u.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  I don't know how to fix this? There are a lot of questionable research sites that offer downloads for these "missing files" but I'm sure that's not the solution.

  Could someone possibly offer me some advice of bette?

  Thank you in advance.

  Hello

  The missing dll is part of HP 3D DriveGuard - you can download and reinstall this software from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards

  DP - K

• HP ENVY 15-j023cl Notebook PC: PC off (supposed overheating, no message appears) after a short period of time

  Hello

  A problem that has been doing worse and worse for me was that my PC turns off completely after a short period of time, now about 1 hour. I used to have the same problem, however, it turns off after 4-5 hours, and after that it is completely stopped for a few hours, he'll be back to normal. I read that dust accumulation can be a problem, although I see no dust in the vents. Do you advise me to open the computer and dust off the fan itself inside the computer with compressed air? Or are there other possibilities of dust collection problems will not fix?

  Before I provide documentation for troubleshooting @Pokeyster, I would like to take a moment to welcome you to the HP support community!

  I'll do my best to help you to solve the problems of closing you met on your HP ENVY 15 - j023cl Notebook PC.

  You asked if the dust can be a factor. The answer is absolutely! I saw him in the past when the reason for the complication was dust in Notepad. I recommend that you keep the free portable dust on a frequent basis.

  Please use the links in the questions below to troubleshoot and then re-post with answers to troubleshooting questions/results.

  Have you tried running in Safe Mode?

  Did you do a BIOS reset?

  Have you tried to do a disk defragment?

  Have you tried to do a Disk Cleanup?

  Please try to clean the events your Noteobok MNI

  Is the noisy fan or turn constantly?

  Is the hotter than normal PC?

  Have you tried tests to hardware failures?

  Here are a few documents for you that can help:

  • Computer hangs or freezes
  • Set the slow system performance.
  • Reduce the heat inside the PC to avoid overheating

  If this post helps you solve the problem, please pay to the front by clicking on the button accept as Solution , right of the thumbs up icon. You can click on the Thumbs up icon to show your appreciation for my efforts today!

  If you need assistance, I would be more than happy to continue to help. When you re - post, please provide me with the detailed results of the above troubleshooting.

  Thanks for joining in!

  Have a wonderful day!

• HP ENVY 15-k200 Notebook: k2t35av - driver ethernet

  Where can I find a driver ethernet for this model?

  When you search the HP site, there are very few available pilots.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-K200-notebook-PC-series/7527530/model/775...

  Hardware ID - PCI Ven_10EC & DEV_8168 & SUBSYS_2290103C & REV_10

  Thank you

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64531.exe

  or

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_104622_1&swEnvOid=4063

  Kind regards.

• HP Envy 14-1010nr: HP Envy 14-1010nr Notebook PC: replace and upgrade to USB 3.0 ports

  Hello
  
  I have a HP Envy 14 - 1010nr Notebook PC, which had two USB 2.0 ports on the left side and a USB 3.0 port on the right.
  
  USB 3.0 port was damaged such as connectors plugged it seem a little loose and can move laterally a little so that the connection to the device comes in and out - makes it uncertain to copy some stuff on a hard drive through it, for example.
  
  Is it possible for me to replace this port? Where could find a spare part for that if it can replace?
  
  Even though I am inside the computer, I might as well replace the USB 2.0 with USB 3.0 ports ports if the pats replacement for that exist...

  You're right, because there is no audio + USB 3.0, only the original + USB 2.0

• HP ENVY m6-n113dx Notebook PC: update the BIOS F.22A and keyboard

  Hello

  I was hoping that over time someone would have posted something with a similar problem, I have, but its been a while so I guess I would ask and I hope an answer and I hope I'm not the only one experiencing this problem.

  Awhile back, I upgraded my laptop BIOS (HP ENVY Notebook PC m6-n113dx) from F.21A to F.22A, who apperently offers improved performance of the internal keyboard. After the update, nothing seemed very different. However when I play a game and press a key on the keyboard, the charater would sometimes get stuck on this action of the key as if she was held down. Usually, I just press the button again to stop this action, although this has become an embarrassment.

  I've been reading the forums and found a lot of options for apperently decommissioning of your BIOS to earlier versions, but I would like to know where I can find a how to or may downgrade my BIOS of F.22A to F.21A, especially for my laptop.

  Thanks in advance

  Hello @BCC119922,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the keyboard and wanted to help you!

  This is possible, and you can find the drivers for your product here:

  Drivers - HP ENVY m6-n113dx Notebook PC (ENERGY STAR)

  Select your operating system and then find the BIOS category.  In this drop-down list, you will see the BIOS update for F.22.  You should be able to choose the previous versionsto the right Details.  This will allow you to access and download version F.21 A.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP ENVY 15-k004ne Notebook PC: update BIOS version for HP Envy 15

  Hello

  My operating system is Windows 10 and F.03 InsydeBIOS version.

  On the download software & drivers Hp site, there is no BIOS listed for my laptop for Windows 10.

  However, for Windows 8.1, F.07 BIOS version is listed for my computer laptop than the last.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-K000-notebook-PC/6936206/model/7185540?SS...

  Can I update?

  Hi @ShreyansJ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.