HP ENVY 15-j165 hdmi output problem

Similar Questions

• HDMI output problem with w2207h

  Monitor: w2207h with 3.0.0 (most recent) drivers installed.

  OS: Windows 7

  Computing: Firebird 802, x 2 9800 S with a nForce 760i SLI

  Problem: After upgrading video card drivers I lost output HDMI, no longer gives a signal.

  I am currentnly using a VGA cable with DVI adaptor as a workaround.

  I tried to uninstall the drivers and going back to previous known working more, but now the problem still persists.  Each install properly said, removed the old drivers and made a full stop down. I've uninstalled and reinstalled both monitor and nForce drivers.

  I tried four sets of drivers:

  197.45 (used to work)

  260.99 (used to work and update 197.45)

  266.58 (nvidia recommended).

  267.24 (beta).

  I also left auto-install win7 it's set of drivers with no luck.

  I also tried to Exchange another HDMI cable with the same results.

  Something to note: I can plug in VGA and HDMI at the same time. The monitor uses input VGA although HDMI is the default value. Under control Panel\Appearance and Personalization\Display\Screen resolution - display I see two choices of monitor. If I force it to choose the HDMI selection it works, but as soon as I unplug the cable VGA monitor loses signal and falls asleep.

  I have accumulated my brain for 8 + hrs on it. Any help is appreciated.

  Also, what happened on the HP Voodoo specific forums They have merged?

  Great success!

  Here's how I solved it.

  1 borrowed a second monitor from a friend it connected via VGA. Also connected my monitor via HDMI.

  2 the navigation target Panel\Appearance control and the Personalization\Display\Screen resolution on the VGA monitor.  Changed display image duplicated on both monitors and it WORKED. I was finally viewing HDMI on my monitor main but forced resolution 1280.

  3. under the control panel nvidia-> put in place several tab displays, monitors showed, I deselected the VGA monitor (it's disabled/grayed out until I did a reboot) and this allowed me to take back the HDMI @ my natieve resolution 1680.

• HP ENVY 17-n107na: resolution taken Maximum supported by the HP Envy 17's HDMI output

  Hello

  I see in the specifications document of rechnical HDMI laptop HP Envy 17-n107na version is 1.4.

  My question is can I use the HDMI port to connect my laptop to a monitor with a resolution of up to 2560 x 1440?

  Or the maximum resolution supported by the HDMI port only 1080 p?

  Thank you

  Hello

  No, its maintenance and Service Guide page #3:

  HDMI version 1.4 support 1920 × 1200 @ 60 Hz

  Source: http://support.hp.com/us-en/product/HP-ENVY-17-Notebook-PC-series/8499288/model/8903915/manuals

  Kind regards.

• (G6-1353ea Pavilion) HDMI output problems

  Earlier this year, I tried to reset my windows but one of the recovery discs has been corrupted, so I had to download a disc of windows 7 and use my serial key to install it. I downloaded the drivers for my laptop to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5220...

  since doing this i havnt been able connect the laptop to my TV via HDMI

  I followed the steps here http://support.hp.com/us-en/document/c01186408 and the HDMI option is not there, I am missing a driver if so what driver should I?

  Carl

  Yes I had already installed

  It seems I have got together, not quite sure what I did but at least his works now

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• HDMI output have suddenly stopped. Pavilion a6340a

  Hello

  I posted here in hope that someone can give me some advice.

  The system in Question is:

  • HP Pavilion a6340a desktop computer. Double heart
  • Vista 32 bit SP2.
  • NVIDIA GF8400GS
  • COMPRO Video mate Vista TV Capture card.
  • 2 GB of RAM.

  It is a bit of an older system, I guess, but it plays well as a HTPC for a while now. It has a small LCD monitor connected via the standard connection and a large flat screen Toshiba TV connected via HDMI. He did a great job.

  Today, the HDMI output just stopped. The Toshiba TV again to survey/is visible in the Nvidia Control Panel and the Vista Control Panel when it is connected to the HDMI. the implementation of the features of multiple monitors are available. But there is nothing happening on TV.

  Things has tried so far.

  • Two different Cables HDMI - nothing.
  • Connected my Pavilion Notebook DV6 on the same HDMI port on the TV - works fine.
  • Installed the latest driver from Nvidia - nothing.
  • Tried all the three HDMI ports on the TV - nothing.
  • Physically, shot the video card in the computer, he dusted off and reassembled it. -Nothing.

  I don't understand. Could this be a processor problem, or I have to pay for a new video card? Is it possible to test the output from the HDMI port with a multimeter or something? I do not understand why it would stop just like that. I just installed Vista SP2 a few weeks ago, but it was working well after I did.

  Any help with this would be greatly appreciated. The system is out of warranty, of course, but it has been a great HTPC for me. I stuck a blu - ray inside player and I was about to give him another 2 GB of RAM.

  Kind of useless now, without HDMI.

  IM at a loss. What else can I do to verify that Exchange of the graphics card?

  Hello

  The short answer is: replace the video card VNvidia GF8400GS. If you happen to have another video card around laying which has an output and HDMI, then install it for a test. It's the fastest way to solve the problem.

  Best regards

  EICO

• Live streaming and own HDMI output on camcorder SONY consumer (HDR-PJ650VE in my case)

  Hi all

  I'm trying to figure out how I can live streams, using my Camcorder HDR-PJ650VE. I managed to connect the camcorder to my TV by HDMI out and get the live stream, but the problem is that it also displays the superimposed onscreen. It would be a very useful feature, since it this way, you are able to capture the stream by a jury of consumers capture and share it on Youtube for example.

  I cannot find anything on the manual release of the stream HDMI output and get rid of overlapping info. Is there a key combination or a hidden menu to achieve?

  In addition, it seems very strange SONY would not offer such feature, as for example the PANASONIC offers this good enough consumption walked on models like HC-V520

  Please, let me know if it would be possilb esolving this annoying limitation

  Best regards

  Matteo

  I want to share my discovery because it seems to be valid for all SONY camcorders: to have a clean HDMI out, turn off on HDMI CTR.

  I'm very happy now and I'll start live broadcast!

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• Satellite L500-131, an HDMI output to the audio amplifier

  Hello

  I can't the sound of my Satellite L500-131 HDMI port to my Pioneer amp supposed to be designed to manage these tings...

  Think the problem is in the early stages as I * don't * select "Realtek HDMI output" as default + output + option is not available.
  Playing around, I managed to get to an old Microsoft driver hidden in memory somewhere and could select HDMI output 'default' through the laptop speakers. But ultimately this ddn can't get sound through either, well that the volume to "sound board" control of Vista indicates activity signal (bars during playback of DVD)... :|

  No idea what is the problem? By selecting "Output HDMI" audio output by default seems to be a Solver for everyone, but it's the only option that is not left in me, so frustrating... :|

  Thank you very much for any help provided.

  Hello

  To be honest I often use HDMI connection on my laptop but I never had any problems with this connection. Everything is working properly and even I checked again all works well!

  Anyway, in your case, I'll try reinstalling the audio driver. You can find it on the Toshiba site.

  If you use the HDMI connection, connect the cable first. Then turn on your TV or your amplifier and finally the laptop.
  Check it!

• Y510p - drivers nvidia HDMI output that's an analog connection

  I had occasional problems with HDMI output before, but can usually get things working in certain combinations to turn off TV and laptop.

  This time, however I can't convince them to talk together. I suspect that this may be due the new drivers (353.30).

  The control panel can see TV and recognizes that it is a LG TV, but TV shows only "no signal".

  I tried

  -the extension and mirroring of the display

  -changing the resolution

  but no luck. The only thing is that enter in the nvidia Control Panel, I noticed that the control panel is refers to the "analog display" and claims that he uses the VGA connector.

  Any ideas how NVIDIA persuage it's really a digital camera display via the HDMI connector?

  Thank you

  Mark

  Now fixed by the expediency of simple to try another HDMI cable :-(

• HP Pavilion TouchSmart 15-n029: HDMI output not working not not on HP Pavilion 15

  Hi guys, I'm new here on the HP Forum.

  My problems started when I got my new laptop and I HATED windows 8.

  If one of my friends had a drive with Windows 7 above.

  After installation nothing worked, no WiFi, USB, HDMI and so on.

  I have serched the days for new drivers and found most of them on the website of HPs.

  But I was not disabled to find a job for my HDMI output driver.

  You guys can help me with this?

  Jesper Forsberg - Sweden

  Hello:

  The only suggestion I can offer would be to try the AMD graphics driver, if you don't have already done.

  Your laptop is not supported by HP for W7 and especially not supported for 32-bit operating systems.

  http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2032

  As a last resort, try to manually install the W7 x 64 graphics driver from the support page and the driver of your laptop (sp66999).

  I explored the driver file, and there are 32-bit included in this file drivers.

• Acer Veriton N2620G-UC101X and no HDMI output?

  Recently got the product above and when I connect it to a TV via HDMI, no signal is received in the Inbox of Acer. Running Windows 7, 64 bit. Any ideas on how to fix?

  Thank you

  If this box does not have HDMI output, is there a DVI-> HDMI adapter that carries the sounds? (Wanting to use the Acer box as an XBMC client on my TV)

  Hello

  If the product comes with an HDMI port, then it should be able to connect via HDMI. Have you tried other HDMI devices to see if it works? The problem may be that the TV that you connect to can't stand is not the resolution of the computer trying to exit. You never have any signal when turning on/off the N2620G?

  DVI is not able to exercise sound and would be possible via HDMI.

• No HDMI output

  I have Windows Vista Premium on my Dell laptop. I can't get the picture on my HDTV via the HDMI output jack computer. He worked for a few minutes and then simply stop. Only the background photo of screen is displayed. Nothing else. What gives?    Thank you

  Hi Larry,

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problem with HDMI output in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  1. What is the brand and model of your computer?

  Please follow the steps in the links.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  We would be more than happy to help you if the steps above did not solve the problem.

• Windows Vista: HDMI Intermittent problems

  I bought an ASUS desktop computer the month last with the intention to use it with a new flat screen TV via HDMI.

  The problem is that the HDMI output is not reliable. Sometimes I can hear startup sound by connecting to the computer, but it often cuts to the middle.

  When I check the audio output devices, I do not see the HDMI device, but it is greyed out and considered "disconnected." If I disconnect and reconnect the cable, he miraculously "reconnects", but I have to restart the application to hear once again, even when it recognized as connected. I can then get sound until the next time I log on, or restart the computer.

  • The HDMI device is set as the default device.
  • The TV is the only video or audio output connected to the computer, and no other audio ports are used at all. The computer is only on television and only via a HDMI cable.
  • The problem exists since I configured the computer the first time, and I did not install any additional software on the computer - I'm happy with the standard Windows Media Center for video and audio options, so no iTunes or another media player has been installed.
  • There is no error message for the HDMI device in Device Manager, indicating that the device is functioning - even when it is obviously not.
  • I tried to update the drivers HDMI but I apparently have the most recent drivers for the hardware.
  • I tried to uninstall the device in Device Manager and let him reload the drivers automatically.
  • The TV has two HDMI ports, and I have the same problem on the computer no matter what port I use. I have audio problems with DVR that uses either HDMI port.
  • I tried at least three different cables with the same results.
  • I know that the cable is not loose at each end.

  While I can disconnect and reconnect the cable to get her back, is not very practical, because the TV is hanging on the wall and it is difficult to reach the port at the back of the computer. I'm also afraid that my son is likely to drop the TV doing it by himself.

  It would be good to have a real DIFFICULTY which leaves just the HDMI audio output available all the time.

  Kiminy

  An update to this issue...

  I put the computer in question to Windows 7 Home Premium, and the problem seems to be resolved completely.

  Kiminy