HP ENVY 15-j173cl N: TouchSmart install win7 on hp envy 15 j173cl ts

I have problems to install windows 7 on this notebook. I would like to know the steps or how I can do to install windows 7 (is a new installation cause all the partitions have been deleted). I already try with an installer of windows 7 USB but, it gives a message "select the driver to install". In the product page, there is no drivers for windows 7 so I download the other drivers of similar computers... but however when I plug in a new usb with drivers is not detected by the system.

How can I do to install windows 7 (any win7) on this computer?

Thank you.

Hello

It's very good news!

Installs network drivers:

Qualcomm Atheros AR9000 series 802.11n WLAN

Installation Kit for all-in-One RTL8111DP/EP DASH for Win7/Win8/Win8.1

http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

Concerning

Tags: Notebooks

Similar Questions

  • Impossible to install Win7 on ENVY 15 t-j000

    I recently bought a HP ENVY 15 t QUAD - E4T17AV

    It comes with Win8 and I honestly can't stand it. Trying to reinstall with Win7, I am unable to find discs to install to. I searched the devmgr win8 to get information about the SATA controller and chipset. I downloaded the drivers and when you attempt to add during the Win7 it found the drivers that are compatible with my system, but when I try to install I get the error ' no new devices not could be found.

    I enabled legacy startup options, disabled secure boot, changed the boot order, all that good stuff.

    I tried to install SATA drives both mSATA connected, that only have one or the other and receive the same error each time. I used several different drivers of HP and Intel, and all receive the same error.

    I read the other messages from people who say that they install Win7 on their 15 t, it must be possible.

    What Miss me?

    Thank you.

    Had the same problem... figured it out... it was not a Sata Contorller driver problem at all.

    1. turn off Secure Boot, active herit.

    2. turn the USB 3.0 BIOS to act as AUTO setting so that the operating system facilities to qualify ports USB 2.0 compatible

    3 HD partition scheme had to be reset... don't know what it was.  Hooked to my Mac and under parition, set it to 1 Partition and chose the MBR as the partition table layout scheme.

    Hope this helps, but still the problem with the graphics drivers from Nvidia and Intel Chipset drivers

  • FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)

    FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?

    Hi Jim,.

    Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?

    Kind regards

    DP - K

  • Keep HP with Vista 64 bit programs to clean install Win7

    My HP pavilion m9400t was bought a year ago and failed to qualify not free upgrade.  In any case, I think I will try to Win 7.  I'm gathering that I need to do a clean install.  How to save all the extra HP provided software installed with Vista (Hardware diagnosis Tools, HP Advisor, HP Support info, Lightscribe, Cyberlink DVD suite, etc.).  I use these programs regularly and want to be able to install on Windows 7.  How to save each of them?

    If this is the case, and I lose all the extra software HP... is there a way to record programs on a DVD and the re - install after a clean installed Win7?

    Where can I find these files?

    OR conversly, if I make a superposition of Win7 on vista installation, be fine or will it be buggy?

  • Impossible to install Win7 on my Qosmio F50

    Hello
    I hope you can help me in my problem. I have laptop old model Qosmio F50 - 10G #. PQF55E-00V012AR. It is installed windows vista Home premium. For my desired to change my OS to windows 7, I reformat real proper installation.

    the problem is, it can be install any OS same win XP and win Vista.

    Windows Vista and Windows 7 this page that I load the hard disk system. It cannot detect the hard drive. I'm trying to install the driver AHCI of it but his failure, now, even windows xp cannot install, it's error when he reach windows boot.

    What can I do if I installed an operating system?
    Help, please.

    I put t really know what the problem is here. By default the BIOS settings and try again to install Win7.
    Do you use the original Microsoft installation disc?

    Start your laptop and press F12 to get into the boot menu. When the menu is displayed on the screen put Win7 disc in ODD, choose the CD/DVD drive and press the button enter.

    What happen exactly when you do this?

  • Stellite P500 - when installing Win7 Bluescreen rises

    Hello

    relative to my: Toshiba Stellite P500 - 127 PartNo PSPG8E - 01M009GR

    Once my laptop did not start more...
    so, I tried to repair with the DVD of MS - Win7... (he did not)
    so, I tried to format c: and set up a new Win7 (it did not work - Bluescreen at different times)
    so, I bought another DVD of Win7 - ((it did not work - Bluescreen at different times)
    so, I bought another HARD drive - (it did not work - Bluescreen at different times)

    My latest idea driver - and therefore my Question: are there drivers available for my device, which only gathers in the EXE files?

    many ways
    Neo.

    Neo can I ask you something:

    You have created recovery DVD toshiba s advice?
    If Yes, have you tried to install the OS by using this original toshiba recovery image?

    I installed image recovery and the version of the Microsoft OS several times so I P500 and it is really strange that you can not install Win7 on this model of laptop.

    Try to set the BIOS to the default settings and try to install the recovery image.

    Please send comments.

  • Impossible to install win7 on a Tecra A8 with ssd

    Hi all

    I am trying to install win7 on my Tecra A8 PTA83E and I have the following problem
    -If the drive is a normal hard drive, then installation is complete OK
    -If I change the disc with an ocz vertex turbo SSD, then the installation will stop, at the time when
    Win7 try to unpack the installation files in the disc with an error message "file not found" or similar. "

    I've been reading about SSD in the web and the prime suspect is the IDE - SATA in Bios mode, they
    all you suggest changing the IDE - SATA mode to AHCI mode. I look in the Bios in Toshiba Utilities
    and not found anything.

    Anyone know how to change the mode in the Bios, if course is supported?
    Also, someone installed win7 SSD in other models and have any suggestions?

    I'd appreciate any suggestions.

    Hello

    As I know the BIOS Tecra does not support this option.
    But it s not no need to change something in the BIOS because the Windows 7 contains the necessary SATA drivers.

    However, I think you should check the SSD manufacturer support page that maybe a firmware must be updated

    I also recommend the formatting of this SSD again maybe it helps

  • I need drivers to install Win7 64 bit on mSATA SSD

    Hello!

    I need drivers to install WIN7 x 64 on THNSNH256GMCT mSATA SSD

    Serial number on my product is 23NS10BFTABY

    Thank you!

    This serial number does not help much. It will be better if you can display the name of the exact model laptop and the model number.

    Anyway, visit Toshiba support and download page for your country and if your laptop model is supported for Win7 64 bit, you should be able to find all of the necessary drivers, tools and utilities.

  • Portege Z830: Cannot install Win7, complains about driver CD/DVD

    Hello!

    I have a brand new Portege Z830 and as usual wanted to start by installing a new installation of Windows 7 x 64 (that I don't want the software provided and cannot be trusted, that it is safe in any case). I have saved all of the disk, prepared a flashdisk USB bootable with Windows Setup and it. The flashdisk OK boots, Windows wonder about my language and keyboard, and then shows a screen where I can choose between installation, repair and something else (the Recovery Console, I think).

    I click on install, Windows starts the installation program aand once a first dialog box appears, it displays an error message that basically says (this is a translation of the message from my localized Windows): "a required CD/DVD drive driver is missing. If you use a driver from the floppy disk, CD, DVD, or the flashdisk, insert now. "And I can't get over this error message. The strange thing is, there is no reason for that Windows requires no additional driver, because he can read the installation flashdisk (apparently) and he can see the ultrabook SSD, too (can be verified as well in the recovery console and clicking the browse of this dialog box). So far I have tried:

    (1) four different Windows 7 images (two of them to MSDN AA, two physical, that have been used successfully to install the OS before).

    (2) switch SATA mode to AHCI Compatible.

    (3) two different flashdisks.

    (4) any combination of the boot order.

    Nothing has worked. I even tried e-mailing of Toshiba, but all messages to return with 'user unknown' (understandable, I had to guess addresses since Toshiba doesn't seem to provide some official way to communicate with them - or is hiding if well I have found it). Does anyone have an idea what I can try next? I rather like the Z830 and I'd love to use it, but the ability to install my own installation of the operating system is essential for me.

    Thanks, Pepak

    > I tried e-mailing of Toshiba...
    Maybe stupid question now, but have you tried to contact Microsoft too? If the BIOS is OK, and if all the USB ports work correctly, I don t think it is Toshiba related issue. Toshiba offers notebook with the original recovery image (WIN7 64-BIT HOME PREMIUM) and ability to create bootable USB stick with the recovery image that can be used when you want.

    What you do now is your own installation of the OS. Toshiba has to do is to offer to all the important factors, download tools and utilities on the drivers page.

    What else could you try? Try to get external USB ODD and trying to install WIN7 using Microsoft installation disc. I'm sure it will work.

  • Need advice for installing Win7 on Satellite A300

    Hello

    I intend to buy Satellite A300-1MT (PSAGCE), and before I do I just check if there are still some problems with drivers for W7 for this model?
    On other forums, I saw that there are some problems with drivers like music keys, webcam, touchpad and FN keys and so on...

    So, can someone confirm me that all drivers are now available and everything works?

    And also until I started installing drivers is there anything I need to know (wait used?) Or perhaps better: does anyone have a special notice?

    Please, find the will to respond! Thank you very much!

    Hello

    I have the Satellite A300 running Win7 32 bit, but my model is PSAG8E.
    To be honest I have very good experience with installing Win7 on Satellite A300 and I can recommend you to install on this Satellite.

    If you visit the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads you will see that your laptop model is supported Win7 and it shouldn't be problem to install all the necessary drivers and other stuff of Toshiba.

    Here is the list how I did this exactly:
    atellite A300 (PSAG8E) and clean Win7

    -Win7
    -chipset driver
    -Storage Manager
    -display driver
    -driver sound
    -modem driver
    -utility supervisor
    -infrared
    -patches 1.2
    -configfree
    -VAP
    Hardware - toshiba
    Control - HDMI
    -WLAN driver

    Everything works well but lacks some drivers

    Added Vista tips:
    Toshiba - help - working properly
    -Card reader - installed correctly
    -Webcam driver for A500 - tested with Skype - works correctly.
    Driver - Synaptics

    Win7 works well and I am very satisfied. No problems with the feature keys FN.

    If you are going to buy this laptop start installation Win7 following this order of installations. Please inform us of problems and I hope that we can help you about this.

  • Satellite A300 (PSAG8E) - hardware problems after I installed win7 ultimate

    Hello and good day,

    I installed win7 ultimate a few days ago, windows was able to recognize most of my material accepts my build of microphone and camera and another component, I'm not sure what it is (Windows Update automatically downloaded the driver of sound and graphics for me).

    My questions are - where you can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The site pilot in the support page Toshiba does not include drivers and software)

    Thank you very much
    King Ben Simon

    Hello

    I have the Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfectly.

    Initially, I must say that I do not know where you are looking for the drivers and tools of Toshiba and that all things because utilities are downloadable on support Toshiba & download page under http://eu.computers.toshiba-europe.com

    It is logical that MIC will not work if you have not installed the appropriate driver. Installing drivers only and not using Microsoft update. What you need are the real and tested and not some free drivers of the internet.

    Go to the Toshiba download page and install all the stuff following this order of installations:
    -Win7
    -chipset driver
    -Storage Manager
    -display driver
    -driver sound
    -modem driver
    -utility supervisor
    -infrared
    -patches
    -configfree
    -VAP
    Hardware - toshiba
    Control - HDMI
    -WLAN driver

    Everything works well but lacks some drivers

    Added Vista tips:
    Toshiba - help - working properly
    -Card reader - installed correctly
    -Webcam driver for A500 - tested with Skype - works correctly.
    Driver - Synaptics

  • How to install Win7 on Satellite C870-190?

    Hi, I hope I'm posting in the category right forum then...

    My laptop is Toshiba Satellite C870-190 and it doesn t want to start my windows 7 CD.
    I tried first with the DEL-button that opened the system startup when I start Notepad and then choose the CD-ROM device and do not want to load the CD and then I chose F2, the first unit on the boot to the CD-ROM section, still do not want to load it... the final solution, I tried to install it from the Windows 8 (current operating system) from my computer--> CD--> setup.exe, and then click INSTALL.

    My computer laptop doesn t have allowed me to install it even from Windows... on file copy screen to say... and then it gives me an error that says that the operation failed... What is happening with this laptop?

    How can I format my HARD drive and then install windows 7?

    Thank you

    At the beginning I will say that I hope that you have created a recovery media (DVD or USB) before you have begun to install Win7.

    Return to your Win7 installation. A long time ago I installed Win7 on friends U940 and the first stage was changing course startup in the BIOS settings mode - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm
    After the installation Win7 has started successfully, but in my case the SATA driver support was necessary.

    Please check first and send comments.

  • Satellite Pro A120 (PSAC1E-03Y010EN) boot from CD/DVD to install Win7

    Looks like this ain t going to go quietly.

    Problem 1
    I get this error message when I set the BIOS to boot from the CD/DVD then the HARD drive and install Win7

    Windows did not start because the file
    \System32\hal.dll is not installed or is corrupt please reinstall

    I ve discovered that l n nor Win7 or Vista use it, so I m assuming it is a blocking when I upgraded to Win7 Ultimate to XP Pro?

    Problem 2
    I get the error message when I set the BIOS to boot from the HARD drive and the CD/DVD

    Windows has a problem communicating with a device connected to your computer

    This error can be caused by disconnecting a device of removable storage, such as a USB external drive while the device is still in use, either by faulty hardware such as a hard drive or a CD-ROM that fails. Make sure that all removable storage is properly connected, and then restart your computer.

    FILE: \boot\BCD
    STATUS: Oxc00000e9
    An unexpected i/o error has occurred

    Did I miss something in the installation of this new HARD drive?
    Anyone has any ideas what's wrong?

    Should I think about cloning the HARD drive to the new HARD drive and then just stick the new HARD drive in the computer?
    I have a copy of XXClone who claims he will do this and make sure the new drive is bootable so is it worth it?

    Thank you

    Installation of Win7 on an A120 can be difficult.

    Have you updated the BIOS?

    What is the size of the HARD drive?

  • Satellite L500 (PSLS0E) - HARD drive not found when installing Win7

    Hello!

    I wanted to install a new Windows 7 (without recovery), but the hard drive was not found during installation. In the start instead menu I can find the drive. So what I need is a driver. But I have no idea where to get one! Can anyone help?

    Version: PSLS0E-06T01KGR

    THX

    Now maybe stupid question but are you using the original installation disk Microsoft Win7?

    I installed Win7 on several different Toshiba laptops (old and new) and HARD drive was visible every time. I deleted existing partitions, created a new and correctly installed Win7 on it.

  • Installing Win7 on Satellite M70-173 - query of wireless internet

    Hello

    I have a Toshiba Satellite M70-173, which I think to be up-to-date with windows 7. However after you run the windows 7 Advisor, he told me to download the driver of the wireless device that is:

    Intel (R) PRO/Wireless 2200BG Network Connection

    I put t really know what it is? Is my wireless 'card '?
    In any case, I check on the Intel site for the updated drivers for win7, and he says:

    "Intel® PRO/Wireless 2200BG Network Connection does not support Microsoft Windows * 7.

    Intel® PRO/Wireless 2200BG Network Connection is no longer manufactured by Intel, nor Intel provide any future software updates to support new operating systems or improve compatibility with devices and third-party software products. "

    Does this mean that I should not install Windows 7?

    How can I work around this problem, do need me to upgrade and how much would this cost?
    Thank you

    Satellite or Equium M70 is old model of laptop computer designed for Windows XP Home edition, so it is certainly not taken in charge for Win7. It is certainly possible to install Win7 on this laptop, but you will not be able to make it work with all the options that are specific to Toshiba.

    Yes it's the wireless card if this card doesn t work for lack of best drivers and the best option for you is to buy the wireless USB dongle. Ask your dealer how local it costs. As far as I know that's not expensive.

Maybe you are looking for