HP ENVY 15 Notebook PC fan TS too work

Similar Questions

• HP envy dv7 notebook pc keyboard does not work

  I tried to restart the computer so that undo the battery. I even tried to do a system restore and nothing is that the keyboard works. The touchpad does not either unless you plug a mouse into the usb port. I have to use the on-screen keyboard to type the password and then it disappears. Please help it is very frustrating...

  Thank you

  Hello

  Maybe it's a hardware problem, but it is always worth trying the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Tap away at the button esc you start the laptop to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• HP ENVY dv6 Notebook PC replacement fan part number of

  I need to know what part to buy to replace the fan. I get hp fan 90 b error message that says that my fan is not working properly. A month ago, it started making loud noises. It still works, but I want a replacement nearby is not installed until the thing decided to die for good.

  HP ENVY dv6 Notebook PC

  Series No.: [edited by Moderator serial number]
  Product #: B6C70AV

  Thank you!

  Hello:

  Because your model is a CTO model it does not give material specifications.

  You need one of the two fan-heatsink for Intel based motherboards, found in Chapter 3 on page 29 of the owner's manual.

  http://h10032.www1.HP.com/CTG/manual/c03591281.PDF

  However, it is very easy to understand than you need...

  If your laptop computer is the AMD / switchable graphics of Intel you need of this fan/heater:

  For use only on the computer models equipped with an Intel processor and a graphics subsystem with discrete memory

  HP Part # 682061-001

  If your laptop has Intel HD graphics card, you need the fan/radiator:

  To be used on the computer models equipped with an Intel processor and a graphics subsystem with UMA memory

  HP Part # 682060-001

• SSD for HP ENVY dv7 Notebook PC

  Product name: HP ENVY dv7 Notebook PC

  Product number: D1A32UA #ABL

  64-bit Windows 8

  I would replace the C drive with an SSD (size 256G). Recommendations on disc compatible or recommended? Thank you.

  Jake1700 wrote:

  Thank you very much for the reply. Problems of compatibility with resection I expect the drive size (in GB)? Thank you.

  I don't think so. The only problem, what could happen is that the recovery disks don't work because the original hard drive was too big. However, this is not a problem. You can perform a new installation using the original version of Windows and the product key from the sticker on the laptop. In this case do not activate it online but wait for an activation message (activate by phone) who wakes up early after the new installation.

• HP ENVY 17 Notebook PC: Unlock BIOS

  Because im going to install ubuntu alongside windows 15.04, I need to disable secure boot. I go and I find that I can not change a lot. I did a little research and discovered that you have to "unlock" your BIOS. How can I do this?

  OS: 8.1 64-bit Windows

  PC: HP ENVY 17 Notebook PC

  BIOS: Insyde F.65, 2014-11-20

  RAM: 8 GB

  Processor: Intel Core i7-4700MQ @ 2.40 GHZ

  BIOS mode: UEFI

  SMBIOS version: 2.7

  NVM, I solved it don't answer.

• HP Envy 17 Notebook 3002ea - need to add more MEMORY...

  Hello

  I have a HP Envy 17 laptop 3002ea (number of product A2Q36EA #ABU) with the following characteristics:

  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  Processor Intel Core i7-2670QM 2.20 GHz, 2201 Mhz, 4 Lossnay, 8 logical processors
  Hewlett-Packard Version / Date BIOS F.08, 11/07/2012
  SMBIOS Version 2.7
  Physical memory (RAM) installed 8.00 GB
  7.95 GB total physical memory
  4.66 GB available physical memory
  15.9 GB total virtual memory
  10.8 GB available virtual memory

  I want to add more RAM, preferably another 8 GB (I use the laptop for work in post production, animation, editing the videos etc.). Please could someone advise me:

  WHAT should I buy?

  WHERE I can buy it?

  HOW to add in my laptop / install it?

  I am a complete novice when it comes to laptops!

  Thanks x

  Hello

  Unfortunately, 8Gb is the maximum ram (IE 2 x 4 GB modules) which can be installed in the machine - I have used the same model exactly myself.

  This can also be confirmed on the following link.

  http://www.crucial.com/UK/store/listparts.aspx?model=envy%2017-3002ea & cat = RAM

  Best regards

  DP - K

• Satellite R630-155 - fan is too loud and SSD update

  I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:

  1. the fan is too loud and never stops. In normal operation (navigation and General Office work) there is a constant high pitch noise which is audible three to four meters in a desktop - high load environment, you just can't take it anymore! The fan never stops... even when you do nothing...

  2. the heat is a big problem. The bottom of the laptop is overheated constantly and I have to place on my desk so that the lower left corner is outside the table, so it can breathe fresh air from below - otherwise, the temperature rises and the (noisy) fan is unable to follow. When I work with the laptop sitting on a couch, I place a thick book between the laptop and my legs. The book must be thick (more than one inch) with hard covers, otherwise the heat going through the book!

  3. last (but not least, I will mention the biggest problems here) that's the problem with the installation of the SSD. I bought a used Corsair F80 (80 GB SSD) from a friend, but I was unable to use it with the Toshiba - BIOS not detect the disc. I tried to install all the latest updates for portable and SSDS but I had no success. Then I put the disc and I bought a brand new Zalman 128 GB SSD (SSD0128N1 Sandforce) but I had exactly the same problem. I contacted my local support Toshiba and after much conversation, the only answer I got is that the laptop is not compatible with these SSDS, and it is acceptable by Toshiba and not their problem. They told me that if I need an SSD upgrade I cannot go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128 GB. I contacted the European support center and I got the same exact answer. I searched the Internet and found someone else with exactly the same problem with a Corsair 128 GB SSD - he concluded that the laptop detects the SSD after ten to twenty resets. I tried and it was true - after a lot of restarts the detected disk Zalman laptop and I was able to successfully install Windows 7, but the process is unacceptable. Also the drive is rated by the sites official at the speed of an OCZ Vertex 2 128 GB (and a little better), but when I ran a cue point in the Toshiba, the results I got were less than half of the advertised speed. Same reference in another machine of the same disc, resulted in the announced speeds.

  Shame for Toshiba...-beautiful design and portability, but all the rest is a big flaw. Their support in non-existent and they do not appreciate their customers. According to me, they stole my money and I will never buy a Toshiba laptop again.

  Sorry for the big message, but I need, I warn potential customers. Can anyone help me with any of these problems? You also have the same problems?

  To follow...

  Hey Buddy,

  With regard to the issue of fan and the heat: you did it BIOS update? A friend told Satellite R630 too and he told me that the fan with the new BIOS version 2.10 activity is reduced. In addition, the laptop is colder than before so I recommend to install this update. You can download the update of the BIOS here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before you start the update of the BIOS, you should consider the following tips:
  -Run update as an administrator only
  -Unzip all files from zip archive before launching the update file
  -Close all running programs as the antivirus and firewall
  -Make sure the battery is fully charged

  With regard to the SSD it s still a little complicated to install 3rd party products and no one can guarantee that these parts would not work. You're always on the side safely with original spare parts from Toshiba.

  All you can do is to install the new firmware for SSDS and hope that it works, but who knows maybe the BIOS update will help you also in this case ;)

• HP envy 17 notebook pc: start password necessary admin

  Need bios admin password for the following:

  HP envy 17 notebook pc

  Product #G0U21AV

  System disabled: 76480512

  Please help

  @chammin00

  Please enter:

  69588534

  Kind regards.

• HP Envy 15 Notebook PC TS: Problem sound Intermittent HP Envy 15 TS / Windows 8.1

  Specifications of the computer:

  HP Envy 15 Notebook PC TS

  Product # E1P05AV

  8.1 Windows 64-bit

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  2 x 8 GB of RAM

  Map of KBC Version 93.52 system 1963

  Graphics device 1: NVIDIA GeForce GT M 740 V.10.18.13.5435

  Graphics device 2: Intel Graphics HD 4600 V.10.18.10.3304

  Audio: IDT High Def Audio CODEC / pilot: stwrt64.sys V.6.10.6491.0

  Question: In the past months, my sound will go off randomly automatically.  If I close the lid and let the computer in to sleep mode or if I restart the computer, the sound comes back.  When the sound disappeared, the volume buttons on the keyboard, so to work with a lag and the mute on the keyboard does not work.  Try to use the sound test, or even navigate the tabs in the Properties section of speaker to accuse also considerably by the sound does not work.

  I noticed other things: I was watching a youtube video when the sound came out, I left the chrome tab that I used for the video and the sound comes back a few seconds later.  He then disappeared a few seconds after I opened a new tab and returned to watch the video.  I had also the same thing happens with the help of a video editing software - quit the application, sound came back, returned to the software, sound went out after a few seconds.  I also had both sound back after going to the speaker properties - Advanced tab and switch format, by selecting the test button and clicking on OK when a message saying "the sound system is in use, taking the test can cause the application to fail" (or something similar).

  I tried to use various utilities for troubleshooting when the problem occurs - the find and troubleshooting audio fix is no problem AND the device is listed as working properly in Device Manager.  I've uninstalled and reinstalled the latest drivers for the IDT HD Audio CODEC several times - no help.  In addition, the problem has been resolved not when I converted briefly to Windows (back to windows 8.1) 10.  In addition, I tried to use the other pilot of "High definition Audio Device" in place and place of the IDT CODEC, but the same problem happened - sound turns off randomly until I rebooted or put my computer to sleep.

  I'm pretty computer - savy but I can't seem to understand what the problem is.  It doesn't seem to be a hardware problem or the sound would probably not come back so quickly or clearly as it does...

  One last piece of information: I noticed that the first time that I reinstalled the Windows audio 24/06/2015 - and also several updates were installed on the 23 & 24 June - watching these updates to see if they are the cause of the problem.

  My father had a speaker bluetooth for Christmas - I tried it out on my computer because it works completely independently of my sound card and it was working fine.

  I bought one of my own for $30 at target - Jam Classic Wireless Speaker - and now I have wonderful sound.

  Does not resolve the issue of the root, but the problem is solved!

  I'm just upset that HP gave me the such a card its crappy that it only lasted 1 1/2 years before give me questions, just long enough to ensure that the warranty expires...

• HP ENVY 17 Notebook PC: Plugged not supported message when plugged AC

  When my HP ENVY 17 Notebook PC is connected, it is is no longer in charge, and the battery icon says "plugged in, not load."  I ran a best of battery using HP Support, and the message says "battery reports a failure and should be replaced as soon as possible... ».  My laptop is less than 3 months.

  This means that the subsystem of loading of the motherboard is ok.

  Had considered running a recovery to see if it would solve the issue?

  I would try that before you send it.

  Beforeyou send in warranty repair, you must really have everything you don't want stored on an external drive anyway.

• Envy dv4t Notebook: SmartPlacement on hard drive?

  Hello people,

  My younger son helps people bring their computers from the dead and lonely people gave envy dv4t Notebook in question here having decided to upgrade to a newer version. He has in turn gave it to me.

  I preferred App Defrag and after install and opening it, I see that the harddrve is not configured for SmartPlacement. Which is, of course, a major requirement for this application to function properly.

  I open the BIOS (which has a date of 2013 of origin) and see Nothing on SmartPlacement anywhere.

  Am I right in thinking, I might as well uninstall my Defrag app and just use the good old Windows Defrag?

  Thanks in advance... Mark

  God bless... Mark

  Hello new SDF15,

  Do you already have an application with a unique built-in function/feature the feature simply NEED becomes (for you) is just a function which all THE systems have?

  Well, even before receiving response from Raxco my dilemma and after watching again the problem, the answer has jumped off the screen of the laptop. 1, the hard drive is (logically) configured with the D:\Recovery of patitioned in car first on the disk. Then, of course, SmartPlacement, which is first reading the first partition is said that there is a problem here.

  The real C:\ drive shows SmartPlacement works very well!

  Once again, thank you for your patience... Mark

• HP Envy 17 Notebook PC TS left hinge problem

  Left hinge on my HP Envy TS 17 Notebook PC pushes the lower lid of my laptop open whenever I open and close my laptop. My desire is quite recent and it is still under the one year warranty.

  Hello

  Yes.  MY problem is solved.  Company and I got the replacement unit successfully.

  Note: If you have a lot of software installed, especially of VMs on your current laptop, so my personal advice would be to get the repaired unit, I came across the problem to reactivate the license think little software, I do several facilities and refuse activation.   However after talking to the licensing issue has been resolved, but it consumes a lot of time.

  However, if the activation of the license is not a problem for you then unit replacement is better.

  Concerning

  PS. but in the new laptop also, I always get a little tic noice when I open and close the laptop from the left hinge.   That is why I it opens very slowly.  I have just pray and hope that it does not break.  because I get 2nd replacement.

  --------------------------------------------------------------------------------------------------------------------

  Hi JigneshDesai,

  mjhuang (honor student) released a new response Notebook Hardware on 27/09/2014 23:47

  Subject: Re: HP Envy 17 Notebook PC TS left hinge problem

  This answer solve your message or question?

  If so, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.

  We appreciate your comments. It's what keeps our community a useful and dynamic place for our members.

  Thank you for being a Member!

  Forum HP's Support team

• HP ENVY 17 Notebook PC: HP recovery discs - are these bootable?

  If I order the recovery disks HP ENVY 17 Notebook PC (by specific product number), would I be able to recover and reinstall Windows 8 Pro in a newly formatted and repartitioned C drive and be able to activate my Windows?

  Thank you

  Rico

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  The support of HP recovery that order you from HP is bootable and will return your computer to a factory State. If the media is going to install Windows 8 Pro is based on the exact specification of your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY 15 Notebook PC: unknown device on PCI Express Root Complex

  Gentlemen.

  Recently bought the HP Envy laptop and upgraded to Windows 10 immediately.

  HP ENVY 15 Notebook PC
  15 - k200na (ENERGY STAR)
  L0C83EA #ABU

  10 64-bit Windows Home

  Device reporting Manager: unknown device on PCI Express Root Complex

  Hardware ID:

  ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  have been unable to solve together searched a lot!

  Can you please help.

  Thank you

  Dave

  Hi, Dave:

  You need this driver...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• HP ENVY 15 Notebook PC: HP Envy 15 action keys works do not (F9, F10 and F11)

  My laptop has been working fine since purchase, but last week, I noticed that action F10 F10 & F9 keys (jump, play/pause, skip) did not work for their function. Before last week I could just press the key to activate, I read other posts of this forum and the answers did not work pressing fn + alt + (key action), either by pressing fn + key action. To make this work I need to access the bios screen and change the default values, but it only works when the laptop is on. If I turn the laptop, turn again he resorts right back to does not. Action all other keys work e.g. keyboard backlight, volume, brightness, etc.

  Any solutions would be welcome.

  Thank you.

  Product name: HP ENVY 15 Notebook PC
  Product number: J2E80EA #ABU

  Laptop: HP ENVY 15-j151sa

  Hello @Spudy96,

  Thank you for your quick response!

  You can try to perform a System Restore.  If this does not work, then you could also try to install the previous version of the BIOS of your Support Site.  Let me know how it goes.

  Good luck!