HP Envy 15 t-j100: HP Envy 15 t-j100 card system

Similar Questions

• Envy 15 t-j100 card reader does not

  I have a HP ENVY 15 t-j100 Quad Edition running Windows 7. His card reader does not work. When I insert an SD card, I get a message that the device is not installed correctly. Windows prompts you to update me the driver, so I let him, but he can't find the driver. In devices with SD card inserted, Manager it shows a symbol in the "Other devices" section "hard drive"with a yellow "!"  The State of the device reads:

  "The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver. »

  I tried to update the driver from there, but still no driver is reported to be found.

  Furthermore, Device Manager indicates that the Realtek PCIE card reader works properly. I updated the driver using sp66065.exe, but there is no difference. The card reader is still not read, nor is it a drive letter appear to the inserted card.

  If I disable the Realtek PCIE card reader, then the "other devices" "Hard drive" in the Device Manager goes. But the card reader does not work as long. If I activate the card reader, the same error comes back with a yellow '! ' under 'other devices' "Hard drive" in the Device Manager.

  Could you please tell me how to resolve this situation? Thank you in advance!

  jacksan1

  You are the very welcome!

  Oh... It's big, happy that the problem was solved after recovery

  It would very probably be updates of Windows.

  Try to create a system restore manually each time before performing any installation of update or something important. You can restore to a previous restore points you have created, if a problem occurs after an update.
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  You can also create a shortcut to a button in your office so that you can easily create manual restore - Option 1 point in the following tutorial:
  http://www.SevenForums.com/tutorials/494-system-restore-point-shortcut.html

  System Restore: http://www.sevenforums.com/tutorials/700-system-restore.html

  I would also change the Windows Manual Automatic Update settings.
  This must be done in the HP support assistant program too - its control panel.

  I hope this helps.

  Have a good weekend
  God bless you.

  Concerning

  Visruth

• Four edition of HP ENVY 15 t J100: ENVY 15t NIVIDIA graphics card problem

  Hello

  Today, I bought a hp envy 15t j100 quad edition energy star portable pc

  and he have NIVIDIA and INTEL stickers and materials but when I open the Device Manager

  I do not see the NIVIDIA only intel HD 4600

  Why NIVIDIA hidden

  or isn't there at all?

  is the problem of windows or your CV

  ??????????????????????????????????

  Hello

  I can't calrify that because it's a CTO machine and did you pay for the NVIDIA card option when ordering the machine? Pilot is on the site of support, sound as material is not on your machine.

  If no physical hardwre, 10 Windows cannot do anything about it. Now, my suggestion: talk to the place where you place your order and ask to give a COMPLETE listing of your computer. Part store lists only the options, not your machine.

  Concerning

• ENVY dv6t-7300 CTO Quad Editio: Envy dv6 IDT sound card does not

  Recently, the sound card for computer laptop has had problems. For a month or two I get appears randomly in my audio using several 1/8 "cables to my speakers and headphones.  Now my problem is that the card is not to give me audio quality and it seems that I need a replacement. Its really quiet compared to normal and audio pieces of low frequencies and sounds just awful.  My laptop is an essential part of my work, so I would like to know what options I have to replace. First of all, I want to make sure that the card is replaceable quality even if not better. Secondly, is it possible for me to get the part sent home to replace me myself or maybe take in my laptop to the building to take only a short amount of time with her. I'm running on an audio interface I already owned for a long time, but it is inconvient for me to use when im to mobile OS. Please indicate all the options that I have new maps that will be filt with my current laptop (HP ENVY CTO 7300 dv6t Quad Edition Notebook PC), and all the options I have for the replacement of the card (remove old and replace it with the new.

  @Xx_Lucas_xX

  The Riddle_Decipher is at your service!
  
  I understand that you have been troubled by Audio drivers

  • I recommend you update the BIOS by using the tool HP Support assistant or the HP website.
  • Once you update the bios > uninstall the current sound driver by using Device Manager > then use this LINK (ditto) to download the updated audio driver and that should fix this problem.
  • For a diagnosis more > click here
  • I also suggest a test of material on the sound card to be on a safer side: click here

  Keep me posted!

  Kind regards

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• HP Envy 17-j141na: recovering a system after 'repair '.

  I recently had a hardware failure on my laptop and my backup data and sent it for repair

  The only repair option that was given to me is to erase completely and factory to restore the operating system. In fact, what did the repair people has been remove my drive and replace it with a new vacuum waiting to be set up with Windows 8.

  Of course, I want to go back to the situation where I have a viable version of my laptop and apparently the only option I have to do is to re - install all software! (I think that 'like', which could take days, I'll have to contact all by software publishers to bring them to re-license a lot of £1000 of software I have on there it will break and I'll have to do it again!)

  So I turned off the screen install Windows 8 and completely (and I mean completely) the laptop brick. When it turns on it flashes the caps lock and will not work even BIOS recovery, ignores F10, F2 etc.

  I contact support, and they are absolutely insistent, that I'm going to need all reinstall. So I was wondering if anyone knows what is happening.

  The system is built around UEFI?

  The system has been improved in the UEFI?

  I'll be able to go in the installation process of Windows 8, upgrading to 10 and then switch to my old drive?

  I will be able to configure the system as Windows 8 and then put in place so that I can dual boot from my old drive?

  If I put all this from scratch what steps should I take to avoid this recurring situation.

  I am also concerned by what happened to my old drive that came with the laptop. HP support assure me that they treat all the personal in compliance data consider but not have given me any indication whether if the drive that was removed has been removed safely (wipes x 35 times) and reformatted or destroyed. So if it's wrong, yet once I need to find how to partition the data on the laptop, so I can send it without composed of my personal data.

  So, am a feeling that I have a laptop that I can not put the data of a personal nature, I can't use it for this purpose, I bought it to left (i.e. to install my software companies and lead by the activities of work at home) and now is just a really expensive browser?

  Appreciated by any reflection on a way forward.

  Hello @elcockh,

  Welcome to the HP Forums!

  I read your message and understand that your HP Envy 17-j141na does not work correctly. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  Computers laptops HP - computer won't start (Windows 8)

  The system is built around UEFI?

  The system has been improved in the UEFI?

  The system has UEFI functionality in the BIOS, allowing it to have secure boot and other features.

  I'll be able to go in the installation process of Windows 8, upgrading to 10 and then switch to my old drive?

  I will be able to configure the system as Windows 8 and then put in place so that I can dual boot from my old drive?

  If I put all this from scratch what steps should I take to avoid this recurring situation.

  If you succeed in installing windows 8, and then upgrade to windows 10; then want to install your old drive and it is still in working condition, you can trade. I suggest you perform a clean Windows 10 installation. If you are able to install the old drive in accordance with the specifications of the maintenance and service guide and know how to set up a dual boot and the old drive is in working order, then you can dualboot. The best things to do to avoid that the faulty laptop is to reduce heat and make sure it is updated and perform regular maintenance.

  Tips to use, carry and protect your laptop from HP

  HP Notebook PC - cleanup your PC laptop

  HP computers - tune (Windows 8) slow system performance

  HP computers - create a recovery Image on disc or save a recovery Image on a USB Flash drive

  If the document does not have you helped to solve the problem, try to restore the BIOS.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• HP Envy 700-327c: graphics card on HP Envy 700-327c update

  I just bought and am preparing to install an AMD over-pants W7000 C2K00AT 4 GB GDDR5 SDRAM PCI Express 3.0 x 16 ATI Nvidia Quadro graphics in my HP Envy 700 - 327 c.  Any input as to what I can do to make this a free update of the problem?

  You are welcome.

  I would like to do some research before buying a power supply.  You may need more power than I recommended.  It says in the specs it uses less than 150W, but even more than the current PSU can provide with other components.

  I'd certainly appreciate hearing how things are going.

• HP envy 17-j130ea: hp envy 17-j130ea graphics card upgrade

  I have the HP ENVY 17 t-j130ea running windows 8.1 with i7-4700MQ processor and 12 GB of ram.

  Currently I have the graphics nvidia Gforce740M - 2 GB but its still slow for a few games, so I want to replace by GTX 780 m coming 780Ti GTX 4 GB or 4 GB. Is it possible?  one more I can improve memory 16 gb?

  Hello

  Unfortunately, the nvidia gpu is integrated with the system board and is not an evolutionary element.

  Your laptop will support a maximum of 16 GB of ram (2 x 8 GB modules) - you can find an example of an upgrade on the following link.

  http://UK.crucial.com/GBR/en/compatible-upgrade-for/HP-Compaq/envy-17-j130ea

  Kind regards

  DP - K

• HP ENVY 137C 750: GTX 1070 for HP ENVY 750-137C graphics card upgrade

  I picked up a refurbished HP ENVY 750-137c and am currently looking to improve the graphics. I don't want to break the Bank, but I don't want it to last me a while, I'm looking at the Nvidia GEFORCE GTX 1070.

  Apart from the evolution of the needs of power, does anyone know if this card is compatible, and if there are problems with this upgrade? In addition, Nvidia recommends a diet of 500W for this card. Would be - it sufficient, or is - this genrous number? In addition, if someone has a product of power supply they would recommend for this theoretical combination, I'd greatly appreciate advice.

  Thank you!

  @Drifterx311, welcome to the forum.

  Here are the full specifications of the card on the nVidia website.  The card is double slot and 10.5 "long.  I suggest measurement of the back plate of e/s to the front of the box to see how much space is available.  I think it fits, but it will be tight.

  As you said, the specs recommend a PSU 500W (PSU).  Personally, I'd buy one at least 600 w.  This will give you extra power for peak needs.  I love Corsair products.  Here are a few PSU for you to review Newegg.  If you choose a modular power supply it will allow you to install only the cables that are absolutely necessary.  This allows for better air circulation.  The PSU is the backbone of the computer.  Read the reviews to see what users have to say about them.  A good diet will make your system run much better.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Envy 14 K110nr: Cannot recover system recovery media, associated with PININST_BBV

  I have a HP Evny 14 K110nr. In short, the system upgraded to Windows 10, started acting weird about a month after:
  Lose access to resources (Task Manager, desktop, Control Panel, etc.)
  Defective devices (wifi, bluetooth, etc.), suspended connections, System Restore gave a lot of mistakes.

  Tried to fix the system, nothing worked (even the DISM restorhealth was not working and suspended 40%)

  Long story short, I tried to recover the hd partition and could not complete successfully, same thing happened with my recovery media.

  At the end of the recovery attempt, I get a BSOD and system resets. It was a loop like that for awhile.

  Ran Diagnostics, no errors, but I suspect it was the HARD drive as the mentioned system errors on it before the collapse.

  I replaced the HARD drive and started the process again, this time I have not received any BSOD, but after completitng, I get a message saying that the recovery was incomplete. Just now my system is a Clipboard and consider Ubuntu if I can't up the widows, but it makes no sense. I read through several threads that referred to this issue and I don't know if I've seen any absolute solution to this issue (none have worked for me so far). Here are a few:

  http://h30434.www3.HP.com/T5/notebook-recovery/recovery-incomplete-cannot-get-any-further-than-Inser...

  http://h30434.www3.HP.com/T5/notebook-recovery/after-disk-recovery-restoration-incomplete-error-ERRO...

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/m-p/25...

  http://h30434.www3.HP.com/T5/notebook-recovery/HP-envy-6-1010ea-boots-into-Recovery-Manager-attempt-...

  http://h30434.www3.HP.com/T5/notebook-recovery/dv4-ChkErrBB-cmd-detect-some-error-during-PININST-BBV...

  At the end of my mind, that has persisted for more than a week. My computer is literally a week or two longer under warranty, HP thank you.

  Hi @braveally,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you upgraded to Windows 10 and then the system started acting weird about a month later with the loss of resources. and malfunctioni devices. You tried to do a restore but received many errors.  Then, you tried to do a system repair, but no luck. You tried to do a recovery from recovery and recovery but Media Manager once again without success.  At the end of the restore process, you have a blue screen and the system resets and goes in a loop.  You have run a complete diagnosis and all spent and that you have received error on the HARD disk before you replace it.

  You proceeded to redo recovery and you do not have the BSOD, but after, you have received the message that the recovery was incomplete.

  Here is a link to HP-HP System Recovery troubleshooting (Windows 8) computers that can help.

  You can also try booting in safe mode.  HP computers - Windows Safe Mode (Windows, 10, 8).

  If the problem persists I try to clean the optical drive, and then try using the recovery again.  You can try to clean it with compressed air or a disc to clean the disc. Also, check your disk recovery for stains or damage.

  You can also try to boot any disk from Windows and reformatting the drive to start over with the recovery.

  If it breaks down again it is likely that the discs and you will need a recovery kit.

  Contact HP to Contact HP Support assistance

  Please reply back with the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• HP Envy 700-200z: video card for want 700-200z

  Hello, I want to add a video card to my desktop 700-200z envy, which came with a single integrated graphics card. This is for video editing, and I just need a card modestly price such as the NVIDIA GeForce GT720, as long as it has open CL or CUDA. The GT720 will work with my motherboard? Thank you.

  Hi George,.

  The NVIDIA 720 is a video card very low end.  You might be better to use the NVIDIA GT 730 for $79.

  Review of the HP articles below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• HP envy 7640: can Hp envy 7640 print with card stock?

  I'm supposed to create maps for homework and I have a hp envy printer 7640.  I wonder if the printer will be able to print on card stock.  If so, please help me on how to implement. Thank you.

  Hey @KateAnderson,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you're looking to print cardstock with your HP ENVY 7640 e-all-in-one printer.  I would like to help.

  For your information, here are specifications of your printer for card stock manipulation:

  Supported cards

  To avoid jams paper and other issues, make sure that you use the right type and size of the sheets or cardboard when loading the paper tray.

• HP Envy 4th gen: graphics card

  I have laptop hp envy touchsmart 4th gen. There is a slot available for the insertion of graphics card. Is it possible to insert a graphics card on this laptop. Can I extend 9-cell 6 cell battery. If you use an integrated graphics card then why would they give slot for graphics card?
  Details as follows
  Model No 15-j053cl
  Thank you.

  sikeya wrote:
  I have laptop hp envy touchsmart 4th gen. There is a slot available for the insertion of graphics card. ....

  Hello

  Where do you find the above information? The following link shows its specifications:

  http://support.HP.com/us-en/document/c03754263

  The 'Intel HD graphics 4400' chip is soldered to the mother/system board and replace that means buy a new computer.

  Kind regards.