hp scanjet 4850

Similar Questions

• Digitization of slides on Scanjet 4850 vs Scanjet G4050 photo scanner

  Have new Dell desktop running Windows 8.1, 64.  Old scanner photo HP Scanjet 4850, already used with Windows XP Media Edition, still works on the prints photo, but cannot scan 35 mm slides.  You are considering buying Scanner Photo HP Scanjet G4050 but first need to know if it is completely compatible with Windows 8.1 and so will scan my slides.

  Hello

  I would first try a 3rd party application like VueScan analysis he Joanie support the digitization of slides and can provide you with a current workaround for your Scanjet 4850 solution, you can install a free trial first and check if this might do the trick for you:

  http://www.Hamrick.com/VueScan/hp_scanjet_4850c.html

  Other than that, the G4050 support the digitization of slides and fully supported on Windows 8.1 with full feature software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DP-127944-2&cc=us&DLC=en&LC=en&OS=4158&product=3236377&sw_lang=

• Can not find the power supply HP Scanjet 4850

  I found that it is virtually impossible to replace the power cord (AC adapter) for my Scanjet 4850.  Appeal of parts of HP (800-227-8164) led to the order and payment ($22) for a single power cord that fits nowhere on the 4850.  It's the wrong cord.  My daughter is having a similar problem, try to replace the power cord for his range of HP printers.  What I'm missing here?  (I mean other than the power cord).

  You can order the order, the power cable or power module, by accessing this site:

  http://PartSurfer.HP.com/cgi-bin/SPI/main

  I hope that helps somehow.

• Need drivers for Scanner Photo HP Scanjet 4850 running in Windows 7

  Same problem as reported by others. HP Scanjet 4850 is NOT compatible. Request that one is not correct. Search for HP website for drivers is useless. I have an operating system of Windows 7 Home Premium edition 64-bit on a desktop computer.

  Hello

  I suggest you to download the latest driver on the site of manfacturer and install in Windows XP compatibility mode. To install a program in compatibility mode Windows XP please follow link below:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Also, I would like to inform you that the device manufacturer is responsible for providing the compatible driver and microsoft does not all drivers.

• Cannot install hp scanjet 4850 on the new laptop with windows 7

  scanner does not appear in program files

  Hello

  The unit you mentioned is not compatible with Windows 7. See the link for the Microsoft Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=HP%20scanjet%204850%20&type=hardware&OS=64-bit
  However, a workaround is suggested in the HP support forum. Follow the steps and you can use the software for Vista to work for Windows 7 for this scanner.
  HP Scanjets - install the Vista scan on a Windows 7 computer software using the program compatibility feature in Windows
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03129972
   
  For more information, please visit the links provided.
  Installation of a scanner

  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  Working with the scanner and Camera Installation Wizard

  http://Windows.Microsoft.com/en-us/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

• How do you install the HP Scanjet 4850 on a Windows 7 computer

  Scanner worked perfectly on my previous Wndows XP machine.  I followed the instructions HP online to install Windows 7 "emulator" (and also Windows Vista but without success.)

  HP provides no specific drivers for win7 for this model. Unless the HP forums suggest methods you can have no option than to buy scanner supported win7

  The fact that it worked in winXP is irrelevant

• 4850 HP Scanjet Windows 7 drivers not yet available.

  Posted in the wrong place and moved here 01/06/10

  I have a new HP e9260f with an old, but perfectly ok Scanjet 4850.  The Image Zone 5.3 software will not load under Windows.  4850 driver does not work although the windows base driver seems to be ok.  Is there an upgrade for the software Image area and a specifice Windows 7 for the 4850 driver?

  Update: says online HP Support is working on this issue and pilots will be available "soon."  I'm a little surprised that there is a long time.  I do not have a legacy scanner and W7 is available, at least in beta, for more than a year.  I hope that the automatic notification HP system work.

  This is now fixed.  Thank you HP.  Here are their email response...

  Hello Phil,

  Thank you for contacting Hewlett-Packard's commercial Solutions Center.
   
  The details provided in your email, I understand that you want to install the complete software for your Scanner Photo HP Scanjet 4850 works with the Windows 7 operating system.

  I understand how upset it might be, let me straighten it for you immediately.

  Phil, at present, there is no special software for your scanner works with the Windows 7 operating system. However, a solution you can try to download the Vista software and then then replace the Vista compatibility mode and then install the software in the Windows 7 operating system.

  I suggest that you follow the steps below to install the full software in the Windows 7 operating system:

  1. Please click the link below to download the full software:

  FTP://ftp.HP.com/pub/softlib/software8/COL17370/SJ-50009-1/setup_full_4800.exe

  Please click on the link above and save it to the desktop.
  2. once it is saved on the desktop, please right-click on the Setup_full_4800.exe file, and then click Properties.
  3. click on the compatibility mode.
  4. give the check mark for "run this program in compatibility mode for" and select Vista.
  5. click on apply and then OK.
  6. install the Setup_full_4800.exe file on your computer works with the Windows 7 operating system.

  Once you have installed the scanner in Windows 7 operating system software, please try to scan from the HP Solution Center and then let us know the results.

• I have a laptop and I have a scanjet branch above but I don't have a road for her and my os is vista, what can I do?

  I have a HP pavilion dv4 laptop and I have my scanner HP scanjet 4850 flat, but when I run the operating drive, it does not connect to the device (scanner), I got an error message saying that I need drivers that was compatible with the scanner scanner operating system is XP and my Vista laptop what can I do to get my laptop and my scanner to connect?

  Get the driver from HP Support and drivers:
  http://WWW8.HP.com/us/en/support-drivers.html
  Enter your product name/number: flat HP Scanjet 4850
  Choose your operating system

• ScanJet 4570c driver - switch from old Win 7 system to the new system of Win 7

  My scanjet 4570c works fine on my old Windows 7 Home Premium 64-bit system.  How can I move the driver for my new Windows 7 Home Premium 64 bit system?  The new system does not recognize the scanner.

  A solution has been found for my 4570c using Windows 7 on a new system, as suggested in a post dated 09/01/2010"Re: 4850 HP Scanjet Windows 7 drivers, which is still not available. -FIXED ".

  1. I downloaded the driver for the 4570c by selecting the 64-bit version of VISTA.

  2. on the desktop, right-click on the file and then click Properties.

  3. click on the compatibility mode.   Give the check mark for "run this program in compatibility mode for" and select Vista.
  4. click on apply and then OK.

  5 install.  It works for me for the simple scans

• How can I install my old hp scanjet 2400 driver

  I have not find a driver for my old HP scanjet 2400 driver. Help, please.

  You can download the drivers and software here:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=297430

  install the drivers according to the instructions on the site.

• hp scanjet 3800 no power

  I write in the right section?  I'm not sure. The site is really complicated and not easy to deal with.

  I have my scanjet hp model 3800, it used to work until suddenly collapsed for unknown reasons.

  my attempts: I connect it to a power source (I tried a few different), but it does nothing to show me that his life, is not even a light... nothing.

  My guess is that something is worng with the power to control device inside the scanner (any ), maybe it burned to the top for some reason any.

  now, what should I do?

  Serial number of the product if necessary: CN764A15CM

  P.S. This thread was moved to HP Service Manager / Service Center Support and Forum of News for Scanners - HP moderator of the Forum

  Hello

  This forum is in fact related to the software.

  Looking for information on a Scanner then please look in the following forum:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

  Could be a problem of supply of power on this thread:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/lost-my-power-supply-what-voltage-do-i-need-HP-ScanJet-3800/m-p/797399#M18182

  Kind regards

  Alex

• ScanJet g4050 not compatible with El Capitan

  ScanJet g4050 no longer works with El Capitan. I have iMac and on the update of OS X 10.11 the scanner stopped communicating with the computer.

  Any suggestions?

  Finally, I contacted HP.  They are aware of the problem. They said they no longer support scanjet G4050. However, they recommend a third-party software that can be downloaded on the net. BUT you will have to pay the money.

  That's what they said:

  The solution that we recommend is VueScan. http://www.Hamrick.com/VueScan/hp_scanjet_g4050.html

  If you pay 80 USD for the software of theVueScan get the scammer as he was running, or buy a new scanner.

  This is the case!

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• HP Scanjet 4300C compatibility with Windows 7

  I did an upgrade from Windows XP to Windows 7 and my scanner HP Scanjet 4300C seems to be properly installed in Windows 7, but nothing happens when I try to scan.

  In the Panel, the Scanner seems to work, but when I try to add a scanning profile I get the error "unable to initioalize the selected scanner. The test of the scanner button is also disabled and the scanner does not appear in 'My computer' as a scanning device.

  I think there may be an updated driver to resolve this problem? The scanner was working fine under Windows XP.

  Hope you can help me.

  TNX

  Thanks to this post, I figured out how to get the scanner software and the driver installed and working on Windows 7 32 bit.

  Here are the directions:

  1. If your scanner is connected to your computer (USB) uninstall by using Device Manager, do not forget to check the box that says "remove driver." And unplug the USB when it is uninstalled.  When I did this had never installed the software previously in my Windows 7 operating system.
  
  2. download the sj657 Installer packed HP. http://h10025.www1.HP.com/ewfrf/wc/generic...=reg_R1002_USEN
  Unzip it into a folder.  If you double-click on the downloaded file, it will attempt to open the file of configuration automatically and you will get a message saying that the software only works on Windows 98, etc.  Just cancel and go to the folder (default location is C:sj657) and proceed to the next step.
  
  3. Select the "setup" application and right-click on it to get properties, replace the XP compatibility (I have service pack 2). Then run the TI and click 'OK' on all Windows 7 warnings.
  
  4. go in the folder Hewlett-Packard now in your directory Program Files, there will be a folder "HP Precisionscan". It will be the only unless you have to other HP products. Open the Precisionscan LTX folder and change all the apps XP compatibility.  I have also verified that the administrator checkbox on each app (there are several) just in case.

  5 restart your computer.

  6 plug in your scanner via USB and let in install.  Windows 7 should give you a notice that your C 4300 has been installed successfully.
  
  The scanner now works using the LTX software installed on your computer. The buttons on the front do not seem to work, or can do you something with it by going to 'scanners and cameras' in your control panel. BUT in the case otherwise, it seems to work great and all the features are there in the LTX software.

  My old C 4300 (I bought this probably nearly a decade) is somehow better than a newer scanner that I bought last year.