HP Envy 17/2000: Is hybrid GPU multiplexed or MUXless?

Similar Questions

• HP ENVY 14-2000 CTO beats Ed: how to install Mac os on my pc

  How to install Mac os el capitan on my pc

  HP ENVY 14-2000 CTO Beats Edition Notebook PC

  running window 10

  BIOS version f.0f

  64 bit

  CPU intel hd 3000

  8 GB ram

  no legacy in bios option support

  Hello

  I see that your computer should be a model from 2011. I could be wrong but HP computers once 2012 come with UEFI - I really don't know, but that's what I found on the Internet.

  If she says legacy, maybe it's just the BIOS that has no extension UEFI, or it coul be your BIOS/UEFI boot mode is set to Legacy mode

  Unified Extensible Firmware Interface (UEFI) is just the firmware code to a chip on the motherboard that provides additional functionality beyond the input/output system BIOS (Basic). UEFI is a way of doing things with your computer before loading the operating system. For example, UEFI can provide menus very graphics and information on a computer and a diagnostic system based on a computer and tablet. UEFI works with the BIOS to initialize the hardware before handing over control of the hardware of the operating system. UEFI can also load and display software storage devices to provide even more features, such as more detailed system information and extensive hardware diagnostics. More information:

  > http://support.hp.com/us-en/document/c03801890

  > http://support.hp.com/us-en/document/c04784866

  If your computer came with Windows 7 preinstalled originally, most likely your computer lacks UEFI because computers that came with 8 preinstalled Win and were supposed to be win 8 certified had UEFI + active SecureBoot.

  Regarding the original question, Apple Mac OS is only officially taken supported devices and hardware from Apple.

• HP Envy 14-2000: Windows 10 on HP envy 14-2000?

  Hello! I use a HP Envy 14-2000, and I want to upgrade the operating system to Windows 10. Windows 10 will be correct for this laptop? Or is I meet problems? I just need to make sure before I update since I've heard so many horror stories about upgrades of Windows 10. Thank you!

  voodooenvy

  First of all, don't be fooled what MS has written about the compatibility of the upgrade of ANY PC to Win10.  I did and he ransacked two of my PC so I had to restore it to the original factory condition to get them working again.

  If you upgrade your PC to Win10 and he trashes is and contact you MS, they you send HERE and disavow any responsibility to screw up your PC.  We see this same problem over and over again.

  Then, I'm sorry to be the bearer of bad news, but the problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.  HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.
  
  However, for the MS drivers that don't work well, you might consider using drivers HP Win8 - although there is no guarantee that these drivers will work.  Here is the link to the page of software and drivers HP product for Win8 to your PC: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-14-2000-Notebook-PC-series/5091481/model/5118491

  You may need to install the drivers using the compatibility mode: http://www.windows10forums.com/articles/compatibility-mode.7/

  However... Before any upgrade, I strongly suggest that make you an image backup of your system to an external hard drive or a large USB key. This is VITAL, because the machine may fail the upgrade, and if so, you will learn that GoBack to Win10 function is NOT reliable, and that can leave you with a corrupt machine that will require the factory reset and lose all that on it, to get it working again.
  
  You can avoid this by making an image backup to an external hard drive or a USB drive using Macrium reflect (MR), which provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Thirdly, Windows Update is easier, but less reliable, how to make the upgrade to Win10.  A much better and more reliable way is to use Microsoft Media creation tool: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10 choose the upgrade this option now PC.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP Envy 700-056: HELP, installed gpu but about 6 long beeps start and not starting

  My pc was initially integrated graphics which simply do not cut it for some games so I decided to buy a graphics card (Sapphire x R9 double 270 x 4 GB of ddr5 memory). After putting in my gpu, I go to restart it and get to the white screen and 6 long beeps, however when I remove the graphics card, the computer starts well, id like help on what mean these beeps, and how to get my graphics card to work (if it's still the graphics card), my diet is the corsair cx 600 m

  Hello:

  Remove the graphics card and change of these 2 BIOS settings as shown on the link below, to replace the Board, and you should be fine.

  http://support.HP.com/us-en/document/c03653200/

• Laptop HP 2000: problem laptop GPU

  After the upgrade to Windows 10 a few days ago, I realized something.  Games and movies, I ran before the upgrade no longer well perfroming; FPS, decreased dramatically to the point were it makes games unplayable and very bad films.  After doing some research on some sites, I determined that the problem was with my graphics card.  My GPU, an AMD Radeon HD series 7340, is not supported by Windows 10.  When looking for technology in the device under Graphics Manager, Microsoft base adapter screen replaced.  I can't find more my card in the computer.  I thought to upgrade to a more recent AMD GPU.  With my computer, is it still possible?  If so, how should I go to?  The answers would be greatly appreciated.  Thank you! -7P2J1S

  You certainly can't pass the video because it is welded directly on the motherboard.

  Regarding the drivers, it is a known problem and there are solutions involving manually or force Windows 8.1 driver installation.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-win_upgrade/get-Windows-10-update-States-AMD-Radeon-HD-7340/3f9604c9-beb2-4af3-aa0e-693e5e8a75a4?auth=1

• HP Pavilion g6t-2000 CTO: dedicated GPU upgrade Possible?

  My laptop has switchable graphics and I was wondering if I could update the map that was not integrated. I bought it three years ago naievely think it would be good enough for the games. The GPU is currently the only thing that keeps me from Fallout 4. Is there something better than an AMD Radeon HD m 7670 (what I currently have) that would be worth upgrading to? I tried to look in the manual for compadible parts and I know that because of the switchable thing that HP should already have drivers for it.

  Hello

  No, you can't improve it. Please also see the following post:

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/upgrading-my-AMD-Radeon-HD-7670M-1-GB-DDR3-dedicated/TD-p/4789546

  Kind regards.

• HP ENVY 14-2000 CTO - Renesas USB 3.0 Host controller 'start of cannont device (Code 10)"

  HP Envy 14 using, Windows 7 ultimate (64 bit), with a Targus USB 3.0 docking station. Use laptop for almost a year. Relatively few problems, but more and more lately. Last is a failure of the device. Device Manager reports a failure with the Renesas Electronics USB 3.0 Host controller and says 'Cannont start (Code 10) device' in the properties. I unplugged/plugged the USB cables. I have powered down/up to the docking station. I have disabled/re-enabled USB 3.0 device. I have uninstalled/reinstalled USB 3.0 driver. (Worm 2.0.34.0, of sp53286.exe on the site of HP supprt) I made this other laptop and docking station drivers are up-to-date. I rebooted several times... Is there a solution?... or my USB 3.0 chipset out crapped?

  Solved. Downloaded driver (not available on the HP support site) http://drivers.softpedia.com/get/Other-DRIVERS-TOOLS/Renesas/Renesas-Electronics-uPD720200-uPD720200A-USB-30-Driver-21320.shtml 2.1.32.0

• HP ENVY h8-1409: upgrade the GPU card mother IPMMB-FM (Formosa)

  I currently have a ti 750 EVGA installed without any problem with this motherboard. The BIOS on this forum is listed as UEFI with a version of 8.21 FRIEND whose date of 21/10/2014.

  I'll be able to spend to the 10xx GTX as a 1060 series, or maybe a RX 480 without any obsolete BIOS problem? I know that some old motherboards from HP could not start even a card GTX series 7xx due to an outdated BIOS that HP did not update.

  Hello

  You said that the jury is listed with FRIEND 8.21. Check that your PC is running FRIEND 8.21?

  You shouldn't have a problem to start the recent graphics cards, if your computer is running a version 8 BIOS. Ensure that the selected card suits and corresponds to the power supply of your PC.

• HP ENVY 17 t - 2000 CTO 3D: Beat audio error! HP ENVY 17 t-2000 technical 3D Director

  Hi, last week my beat audio leave work. The Committee has also disappeared. I tried to reinstall the driver IDT since driver's Web site (it is detect my laptop perfectly) after reinstall audio IDM some time the noise disappeared.

  I download the audio drivers here using auto-detection:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-2000-3D-Edition-Notebook-PC-series/504623...

  Please help me... It's a little frustrating.

  The driver I have download is: driver Audio IDT high definition (HD) - sp52562.exe

  Thanks in advance

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52562.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50557.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter.  Press and hold both the power button / stop and pulse for 15 seconds, then release.

  Plug the power adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

  Kind regards

  DP - K

• Envy 15 k233ca: memory upgrades and hhd

  I'm trying to find out if the k233ca has a capacity of upgrade. By reading the plug here and there, the motherboard has 2 slots and there is 1 to 8 GB 1600 Mhz DDR3L module.

  When I called customer service to see if there was a favorite of the seller, they told me that the Ram was not expandable as the machine has only 1 location and tot of the MB does support up to 8 GB.

  Well...

  As a technician, I'm leaning towards believing the former rather than the latter, and since I did not open upward again, I checked Everest and it shows 2 slots, one with a 8 GB module and a location empty.

  Before I open the unit to find this information for me, I wondering if someone is more familiar with this device, or can point me to a more detailed specifications and current page?

  My questions are specifically,

  1. What is the model of the motherboard more precisely and will support 16 gig?
  2. This is a configuration of dual slot, so I can use 2 x 8 GB modules?
  3. Can I use a low latency Ram? replace the original module to match of course...
  4. Is there a QVL for this MB?

  Now for the HHD, a question... This machine will support SSD?

  Based on the HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP ENVY Notebook PC - Maintenance and Service Guide of m7, it seems you should be able to switch to 16 GB of RAM and an SSD as follows;

  Memory

  Two SODIMM slots
  Support of the DDR3L - 1600 MHz Dual Channel
  Supports up to 16 GB of RAM in the following configurations:
  ● 4096 MB total memory (4096 × 1).
  ● 8192 MB total memory (4096 × 2)
  ● 8192 MB total memory (8192 × 1).
  ● 12288 MB total memory (8192MB 4096)
  ● 16384 MB total memory (8192 × 2)

  Hard drives

  Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
  Storage SATA m2 (Port0)
  Accelerometer / HDD protection support
  Supports the following drives:
  ● 1.5 to 5400 RPM, 9.5 mm
  ● 1 TB 5400 RPM, 9.5 mm
  ● 750 GB 5400 RPM 9.5 mm
  ● 500 GB 5400 RPM 7mm / 9.5 mm for PC portable HP ENVY 15 only
  The hybrid configurations
  ● 1 TB 5400 + 8 GB NAND hybrid disc HARD 9.5 mm
  ● 750 GB 5400 + 8 GB NAND HARD 9.5 mm drive hybrid
  SSD drive

  Only configured with up to 8 GB system memory:
  ● 256GO M.2 SATA (MLC)
  ● 256GO M.2 SATA (TLC)
  Double storage configuration for the HP Envy 17 computer models
  ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (TLC)
  ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (MLC)

  Please note that it requires an extensive disassembly and reassembly of the computer to make these improvements, including

  remove, replace or loosening the screws up to 83. Also, note that other RAM/HDD/SSD configurations can run on this computer. It may be possible to have a facility that includes 16GB of RAM, a standard SATA III SSD and/or m2 SATA SSD card, but you will have to experiment to see specifically what works on your model.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Envy Sleekbook 6-1019NR: HP Envy Sleekbook 6-1019NR brick HELP!

  RE: HP Envy Sleekbook 6-1019NR brick HELP!

  Hello guys,.

  Seems to my laptop was bricked during the BIOS update.
  I searched the web for hours, looking for a solution with no result.
  I hope I can get help here.
  Thanks in advance.

  INFORMATION SYSTEM (At the time of update/being in bricks)
  Model : HP Envy Sleekbook 6-1019NR
  Start-up : internal hard drive as primary
  OS : newly installed Windows 7 Ultimate 64 bit
  Pilot : all drivers have been updated from the HP website.
  Note : hard disk has been whipped clean (formatted) everything (including the HP files pre-installed) and repartitioned in to a single partition since day 1.  Even with all the changes to the hardrive, it worked fine.

  State of PLAY (After the BIOS SP60727. EXE update from the HP website)
  1. laptop powers
  2. the light stays on
  3 Caplock light has two long flashes
  4. fan works
  5. the screen remains off (no display of any kind at any time when laptop is turned on)

  USB TESTING (Another HP laptop in good health during the tests, battery and power cord were not disconnected)
  Model : HP Envy 14-2000
  Boot : USB as primary
  OS : newly installed Windows 7 Ultimate 64 bit
  Pilot : all drivers have been updated from the HP website.
  Note : hard disk has been whipped clean (formatted) everything (including the HP files pre-installed) and repartitioned in to a single partition since day 1.  Even with all the changes to the hardrive, everything works fine.
  1. bootable USB BACK was made with "HP USB Disk Storage Format Tool"
  2. downloaded "" SP60715. "» "EXE" from the HP Web site (even as it is installed)
  3. using 7 - Zip, file '03385.fd' has been extracted from "" SP60715. "» EXE ".
  4. '03385.fd' file has been saved to USB
  5 USB is connected to the laptop
  6. when turned on without having any pressure on the buttons, BACK loading with '03385.fd' in the folder root when the "DIR" command was used.
  7 and now the 'Windows' + 'B' button > switch on/off

  screen stays off

  power light stays on

  WiFi stays on (orange)

  Caps lock flashes in the meantime a flashing continuously

  USB flashing in an interval long continuous flashing

  Laptop was in this State for 30 + minutes with out any changes

  Has been turned off manually, USB has been removed, power has been repressed manually.

  (Fingers crossed that I don't have just F #& K another computer LAPTOP)

  Laptop started right windows, looked just as before the test system.

  Could not say if this trial did nothing at all, but I guess if reinstalling the BIOS has been made successfully, this is what it should be?

  USB FINAL PREPARATION
  1. bootable USB BACK was made with "HP USB Disk Storage Format Tool"
  2. downloaded "" SP60727. "» "EXE" from the HP Web site
  http://support.HP.com/us-en/drivers/selfservice/HP-envy-Sleekbook-6-1000/5269347/model/5286450#Z7_30...
  3. using 7 - Zip, "018DE. BIN file"was extracted from" "SP60727."» EXE ".
  4."018DE. BIN "file to USB

  WHICH HAS BEEN TESTED
  Note : battery and power cord was unplugged, power duraining in now the power button for 30 + dry before plugging the power cord was made every time for all of the following
  1. the CCMOS reset unplug and plug back the CMOS battery for 5 + mins
  2. the cord connecting > keeping 'Windows' + 'B' button > switch on/off
  3. 'Windows' + 'B' holding down > connecting the power supply cord > turn
  4 while now the 'Windows' + 'B' button > plugging the power cord > power on/off (hold the power button down for 5 seconds)
  5 connected USB bootable BACK > keeping 'Windows' + 'B' button > plugging the power cord > turn
  6 connected USB bootable BACK > keeping 'Windows' + 'B' button > plugging the power cord > power on/off (hold the power button down for 5 seconds)

  I missed or not doing something correctly?

  ====================================

  Update 1511031825

  I've done some research more and right now, that's how I've got.

  1 USB has been named as HP_TOOLS

  2 within the USB, directories must be performed as Hewlett-Packard/BIOS/current

  3. in the "Assets" folder, I have files '018DE.bin' and '018DE.sig '.  These files were backup of the original HP HP_TOOLS within this portable partition before I deleted.

  RESULT : Laptop load screen of the BIOS update, but the update will fail with the note saying "BIOS recovery system has no" 'could not open the BIOS image file.

  Any ieads on that?

  I did some research more and was able to put the pieces together to get this problem solved my self.

  Laptop is now running.  Yay!

• HP Pavilion 17-e062sd: need drivers for HP Pavilion 17-e062sd

  Hello

  installed windows 7 x 64 on my laptop, impossible to find some drivers on the hp support site
  Windows Update gives no chance either
  These are the drivers, I need

  SM - buscontroller

  probally usb USB controller 3

  unknown driver (lol)

  Ethernet driver

  also I can't as the GET work no installed hybrid gpu stuff different amd drivers no chance
  Thanks in advance

  arno kg

  Hello:

  There is no W7 drivers for this model.

  Your only hope is to try the drivers directly from AMD for graphics, usb3, and smbus controllers...

  First install the chipset driver and restart.  You want the first driver on the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Graphics card: 1 driver on the list.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy3&OS=Windows%207%20-%2064

  Ethernet: Try this one...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp68120.exe

  Unknown may be this...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Hinge broken laptop HP jealousy

  Both hinges broke on my HP Envy 13: 2000 spectrum model.  The left hinge broke several months ago I was using as a desktop computer by it moving and carrying only when absolutely necessary.  The right hinge broke this morning and now the screen does not remain upward without outside help (currently using a stapler in vertical position and weighted tape dispenser).  I LOVE this laptop, the size, the weight, the processing speed are in circulation, but the issue of the joint is making it virtually impossible to use.  Thanks in advance for your advice

  I suggest that get you in touch with Jeff at HP, he has helped me sort out my sleekbook that was out of warranty got it repaired at the expense of teir and they organized the collection and return.

  I hope this helps.

  [email protected]

• 5 Ghz WiFi 802.11n support

  I'm considering the purchase of HP Pavilion dv7-6056, HP Envy 17-2000 or HP Envy 17-2050. But I understand that all of these PCs have 5 GHz WiFi (802.11n) support. I see other HP have the ability to change the WiFi card. Is there WiFi cards with 5 GHz support available for these models?

  This widget could not be displayed.

• brightness and volume of the icons on the screen disappeared

  I have a HP ENVY 14-2000 CTO Notebook PC with a Windows 7 64-bit os.

  Help! For some reason, the brightness icon and the icon of volume on my screen stopped appearing. I don't see the icons for brightness when I press F2 and F3 keys. Is the same with volume of beat icons when I press F7 and F8 and disable the keys F9. Strange thing is the screen always brightens and fades normally and the volume goes up and down and normally puts muted. I can't see the icons.

  Hello

  Download and reinstall the following.

  HP Quick Launch software.

  HP OSD utility.

  Once completed, restart the laptop.

  Kind regards

  DP - K