HP Envy 17 heat questions

Similar Questions

• Want J020dx: Power cord for HP Envy 17 "J020DX question, urgent pls!

  Hi all

  I have a HP envy 17 "J020dx, and now I'm in Australia, where I couldn't use the previous/power cord, and the problem is I could not find the adapter Plug and will be stuck in this situation for a while.

  I managed to find another power cord that fits into my diet, but said cord 2. 5A / 250v while the previous cord was 7 a/125 v, Australia 240V voltage.

  Sorry, I could not remember the requirement of entry written on my power adater ampere, but the voltage is 100-240v.

  It is, it will work cord aussie safely? Thank you very much!

  Hello

  Your question gave me a chance to look at my laptop at home now. %0% of them use 2. 5A - 240V cords others use a 5, 7. 5a and 10 to the cords. I also turned my HP Envy 17 t loan charger and requires 1.5 a entry. What I see: 2.5 a input cord 1. 5A charger is ok.

  Kind regards.

• Envy 17-K224NR: question about Realtek HD audio on laptop with Console Audio Beats

  I bought a HP Envy 17-K224NR which has Realtek HD audio in Device Manager, handed over to new, but it has also the Console Audio Beats, but the console has very few cursors, such as cursor control of bass and voice.  Should I uninstall the realtek drivers and re-install the drivers Audio BEats to get full conTHe Beats Audio system provided with WIndows 10 and sionce has been updated with the update of the anniversary.

  The Realtek drivers and the Beats Audio console are now on my system, I thank you.  The only thing I don't like is the fact that I have no control over the bass, music or voice, the sliders is not.

• HP ENVY 5640: Several Questions in 1 post: Types of paper, paper thickness, length of paper

  What is the largest GSM that can fit inside the HP ENVY 5640?
  
  What is the variety of types of paper (such as brochures and flyers and business cards) that can fit inside the HP ENVY 5640?
  
  What are the maximum lengths of paper which can fit inside the HP ENVY 5640?
  
  All responses are GREATLY appreciated. Thank you!

  Brendan Conder
  Geeks of GC

  As far as I know, GSM is an acronym for "grams per square meter" and has exactly the same meaning as scientific notation more:

  

  They provide a measure of the density of the paper; in general, the higher the value, the thicker paper GSM.

  GSM values are used in the world; the major exception is America, which still uses the values of weight "books" (even though I believe that the significance of this measure differs slightly depending on the size of the paper "basic" which the eventual paper size has been cut).

• HP Envy 700-430qe: question to downgrade HP Envy 700-430qe operating system

  This computer came with windwos 8.1 and to be honest, I hate it.  This model can downgrade to windows 7 if I have a few copies of this House, or can I get a HP disc with this system and drivers and what not... sent my bigest most question is are there drivers for this material available for windows 7 for this computer.

  J6N60AAR is the spicific product number.

  HP has no Windows 7 drivers for this unit.  Make them can be a challenge.

  Don't forget to create the external HP recovery media before doing anything.

  Update the BIOSon your PC and get your PC stable if need be.

  You have a PC delivered W8.  Did you check with HP and see if you have downgrade rights?

  Consult this publication of the article.

  If you still wish to go forward with Windows 7, then you can get the drivers of thissimilar model.

  No guarantee that they will work.

  Be careful when using Windows 7 disks that you have around your House.  If the license key has been used on other computers, then you will not be able of their.  A key, a single computer.

  Instead of going through what do not make look like Windows 7:

  http://www.eightforums.com/tutorials/50124-Windows-8-1-make-look-feel-like-Windows-7-a.html

• Envy 14 HDMI Question

  Specifically in this case, the envy 4-1130us Windows 8.

  From what I've seen so far on the web, the people who use to connect to the HDMI TV do not receive a picture full screen? There seems to be bars on each side, as if it will not output the full picture of the HD.

  What is the native resolution of HDMI output? It should not output 1080 p via HDMI and less via DVI, VGA?

  I don't want to spend more money on this thing, if I can even enjoy her features as usual...

  Hello

  It's something to do with the TV, the video card and ratios of the videos/movies. Nothing to do with HDMI. If your TV resolution is 1920 x 1080 (full HD or FHD) you should get FHD on your TV no matter what. The black bars top and bottom OR left and right are something to do with the format of the content NOT because of TV or HDMI or your computer.

  Hope it makes sense.

  PS. You can see many American TV shows have balck bars left & right because they up to use the format of 4:3, widescreen (16:9).

• line and the value of manual entry of a heat question

  I have a manual, I try to grab the empno in 1 column.and another question, I try to add as many lines one by one line, but could not draw.

  application:https://apex.oracle.com/pls/apex/f?p=70785:1:130100846235621:ADD_ROWS:NO:

  Details of the workspace: ram_r & d

  username/password: test/test

  Hi rihab,.

  I try to enter the empno in the 1st column

  You must use APEX_ITEM. TEXT to make your editable empno.

  Editing your app and now you can change the value.

  I think you have some trigger on empno auto generate the empno, who first then remove your value will be inserted.

  Also create a validation to check the unique number of the employee.

  and another question, I try to add as many lines as a rank but could not draw.

  You cannot add more than one column at a time according to your current code.

  First, you must present the new line, and then you can add the new line, you can't add more than one line at a time.

  Hope this helps you,

  Kind regards

  Jitendra

• HP Envy 700-500z: Question about wi - fi antenna tower for the wi - fi signal booster

  Hello

  I bought a wi - fi turn antenna to boost my wireless signal so I can use my Tablet outdoors during the summer.  The instructions provided with the said Tower if the computer has built in wi - fi or wireless card, do not install the antenna tower software becauce it could cause a conflict.

  It was suggested to me that I could either turn off the card go in BIOS or go to network and sharing Center and change the settings of the map, right click on wireless icon, select Disable.  In this way, I could safely install the antenna tower software and use antennas to boost my wireless signal.

  I live in the mountains of NE PA, in a pretty remote area.  'Hot spots' are so rare.  I have no Internet DSL but the signal is not strong enough to reach my Tablet if I should be on the outside.  Even in one of the rooms, the signal is not all that strong.  So it would be great help for me, if I could push my wi - fi at least in the immediate area outside my house.

  Could someone tell me if the network settings can be sure to do, or I would return just the antenna of the tower.  I will not go into the BIOS because I fear of seriously harming my computer by doing this.  But a simple change in network settings, I'm pretty confident that I could.

  Thank you

  Sandra Knapp

  Hello Dave,

  Yes, I suppose I could do that, last spring, they have installed a new router and told me that he would have a stronger signal for wi - fi, but it did not help me using my Tablet out on the patio at all.  I couldn't get a signal here, nothing at all.  So I have a feeling they don't have anything stronger, but I could ask.

  Thank you for suggesting that.

  Sandie

• 15-p248ne Pavilion: Pavilion 15-p248ne heating question

  Hello

  The laptop runs with 30-35 ° C temperature on idle, but when you play a game for an hour for example Counter Strike GO, the CPU temperature gets to 92 C. is this normal?

  I use a software called HWmonitor to show the time.

  92 is hot but not deadly. I had a similar HP with 850 M graphics laptop and it got hot, too, as around 90 c. The fan sounded like a Jet at take-off engine, but it has never been unstable or artifacted or whatever it is. They are designed to take up to about 100 ° C. I make sure that the air flow is good, raise the back of the laptop. Keep the vents in fan blown. Not much more you can do other then he underclock a bit. If you go into the profiles of power you can set the State of the CPU max 99 or 98 percent and it really helps and is not something, you see. This is essentially what happens when you run it on battery. It is in a mode that declocks the CPU for energy savings.

• HP ENVY Notebook m7: question of sleep mode.

  When the laptop goes into mode 'sleep', it not to turn back but when turn it off by pressing the power button, then restart it, it works normally again. How can I solve this problem?

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• Heating question Z5

  If I watch a few clips on 480 p for example I lose small % of batery and my back of the phone is normal but when I watch HD videos or playing games Burns my phone... What is the problem?

  Hi @cakiMK,

  Video HD and games will cause the CPU to work harder, so you should expect the phone to get more hot do those things, but should not be uncomfortable to hold.

  The handset has a built-in security which will cause the phone turns off automatically if it overheats.

• HP ENVY 5532 - a question of alignment?

  I just bought this printer, having already owned an HP Photosmart C4180.

  Is there a way I can stop printing on an alignment sheet whenever I turn it on?  As the price of the inks and paper increase, I do not see why this printer should print an alignment sheet, you will then have to scan, so he can print another page!  This leads probably too far perfection?  Why can't be left to decide if the ink cartridges need alignment and if they do, then check that the fo alignmnt.  SO if it is possible to change the default settings to stop the alignment and the scan, I'd appreciate you telling me.

  Any help you can give me to stop all this extra use (unnecessary) of the ink and the paper would be appreciated.

  With our thanks

  Phil Harknett

  Hi Corfe,

  After that first initial alignment page is printed and analyzed successfully by the printer, it should not happen again until the cartridges are replaced.

  If she persists in each power upward, I updated the firmware of the printer, once you connect to the Internet.

  A quick fix for now would be to press the red X button on the front panel of the printer after turning on the device to cancel the alignment process and save the ink/paper.

  Please let me know if it helps.

  Please click on the star white congratulations in my post, if I helped you
  If I have solved your problem, please click on accept as Solution to help others

• 5530 envy: Envy 5530 alignment questions page

  Everytime I turn on my 5530 want it requires immediately I have print and scan an alignment page.  After scanning the page it says cartridges are defined for quality parameters.   I'm tired of wasting ink and printing and scanning of pages of alignment without reason productive energy.  How to print without having to go through this routine every time it is consumed on?

  Hello @roadrunner17 ,

  Welcome to the forums of HP.

  I understand your desire 5530 guard print the alignment page.

  I would like to help.

  After scanning the page it says cartridges are defined for quality parameters.

  This tells me that the alignment failed.

  This perhaps also why he continues to try to line up.

  An alignment Page prints whenever the all-in-one is turned on or off or a print job is started

  An alignment Page prints whenever the all-in-one is turned on or off or a print job is started

• HP Envy 15 x 360: HP Envy 15 x 360 Audio said it emits but not sound

  Went to this for an hour and I tried all the previous solutions. I've updated, uninstalled/reinstalled, restart the computer, shoot bad, etc., but nothing seems to solve my audio. It is not a problem with the headphones as with or without them audio does not work. I think it's a problem with the speakers, but not quite sure.

  Product name: HP ENVY 15 x 360 PC
  Product number: J0E41AV
  Serial number: [personal information deleted]
  BIOS (Configuration):F.24-11/28/2014 (0978100000405F00000420180)
  Keyboard Review: 89.22
  Total memory: 8.00 GB
  Name:Intel (R) Core i5-4210U CPU @ 1.70 GHz processor

  Hi @mnma88 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY 15 360 questions X Notebook and with the sound doesn't work does not correctly. Here's a documenton troubleshooting sounds if you need it.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Hope this helps,
  
  Thank you.

• HP ENVY Notebook PC m6: biometric device problem

  After I've updated for Windows 10, if I leave my active biometric device, my mouse pointer/cursor continuous flickering as if to show the system is busy.

  I'm on the latest version of the driver for my hardware. Now, I am unable to use my fingerprint as my password.

  The only way I knew to prevent this was to turn off my biometric from the Device Manager.

  So I'm more able to make use of my material, even if its there on my laptop.

  Please help me.

  HP Simple pass seems to work, but the problem is that whenever the biometrics is selected, the mouse pointer continues to flicker.

  

  Hi @Ashkal052,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your m6 HP ENVY Notebook and questions with the Simplepass works not properly. I suggest you uninstall fingerprint driver or reinstall the version updated driver and HP SimplePass ultimate installed and reinstalled the latest version for Windows. Here is a download for the reader of fingerprints for Windows 10. This download sp71729.exe should work for you.

  Please let me know how it goes.

  Thank you.