HP Envy 17: num lock key withouth the settings in the Bios

Similar Questions

• HP Envy TS: Num Lock key

  Num lock key will not work. It sounds right, alternating up and down. Numbers on the numeric keypad do not work

  Maybe some sort of sticky key?

  I did a hard reset - did not work.

  Uninstalled and reinstalled the keyboard driver - did not work.

  Help, please!

  Hello @RBones2016,

  Welcome to the HP Forums!

  I read your message and understand key NumLock does not work on your laptop, HP Envy. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in this document:

  HP - computer keyboard laptops laptop troubleshooting (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows. For more information please provide your product model using the link 'find my product'.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• caps & num lock indication on the screen or through KEYBOARD

  How the caps lock and numlock status indication on the screen or via the keyboard LIGHTS when using windows 8?

  Hi Chris,

  When you press the caps lock or num lock keys in the keyboard, you'll be able to see the lights come on indicating that the CAP/NUM lock is on. Similarly, you will also see a pop-up notification, and then disappear when you turn on or off the CAPE/NUM LOCK key.

  If you are unable to see these indications, please get back to us with the make and model of the computer so that we can tell the exact steps to check this information on your computer.

• Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  Hello, please help me. I use a power keyboard for my laptop. I see in the new keyboard is equipped with a num lock key is turned on. I can't use on it please help me disable it. I do not use a NumLock on. Thank you

  You say that when you press the NUM LOCK key, the Numlock State does not change (if enabled to disabled and vice versa)?  Have you tried to unplug the keyboard and by ensuring that the keyboard of the laptop does not have enabled Numlock?  If so, turn it off on the laptop keyboard and reinsert the another keyboard and see if the problem is resolved.

  If you do not need the Numlock key, it can be disabled at startup with the following procedure:http://www.technipages.com/enabledisable-numlock-at-login-or-startup.html. Once this is done, I don't think he's going to turn on or off and that they the keyboard will start in the off position.  You will not be able to use the key yourself or another, but maybe the problem she is on (which is worse than it to be impossible to be turned on) will be resolved and I hope it will be enough for you.

  If the key does not work and you want to be able to use it, the keyboard may be defective.  Try the keyboard on another computer and see if you have the same problem.  If so, the keyboard is defective and must be replaced.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite P300 - strange problem with num lock keys

  I had a problem with my keyboard lock num. I have a P300D - 131

  By pressing '4' and '8' at the same time, it shows on the screen '4 '.

  By pressing "0" and "6" at the time, tamed, it shows on the screen "0 0".

  This also happens if I touch the very fast numbers. That's why you can't count on the num lock keys! I have this problem since I bought the laptop in July 2008. Now, I found this forum and I hope that really that someone can help me solve this issue!

  Thank you
  HDW

  Hello

  These issues in the past have been resolved with BIOS update. I therefore recommend as a first step of the BIOS update.
  Check the current version on your laptop and the most recent proposed on the Toshiba download page.

  To be honest I don't understand why you waited so long on this subject. Laptop warranty valid and the nearest Toshiba authorized maintainer can help you about this.

• Caps lock and num lock keys lights don't light up

  Hello

  My caps lock and num lock keys lights don't light up when I turn the plugs or NumLock on, I recently contacted Microsoft Tech support, they told me to contact my HP manufacturing and it's a laptop, they did ' t really gives me a lot of support, so I'm here without you people asking how to solve this problem.

  Thank you
  Marco

  Hello Marco818,

  Thank you for your message.  Microsoft was right to put you in touch with the manufacturer of your.  The keyboard will fall under the material, so only they can fix or diagnose what the problem.  It could be something as simple as a bad supply or burnt cable bulb.  Anyway, that falls under HP support.

  See you soon

• WHERE to download and how to install windows 8 oem and register with the key from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  See here, make sure you download the correct edition:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• Num lock key is on when I start my laptop, I always shut it off to type my password.

  Original title: my NumLock key is on when I start my laptop, I always shut it off to type my password... It's boring

  When I start my computer first thing the number lock lights up, I must always remember to turn off to connect to my computer, I noticed also turns on when I switch off my computer... my computer is a computer laptop sony vaio w / xp... everyone... .plz help

  Hi Kim,

  You can follow this link to turn off NumLock in the BIOS (Basic Input Output System) & check if the problem persists:

  How to change the status of the Numlock key to start the computer?

  Reference: NUMLOCK causes problems of connection with laptops

  Hope the helps of information.

• "CAPS LOCK" key causes the delay

  Whenever I use the "caps lock" key, a pop up box appears at the bottom right of my screen and I can not continue typing until the box lowers, which always takes at least a total of five seconds.  This creates an intolerable interruption by typing.  How can I get rid of this pop up box?

  What the popup box to say EXACTLY (including all codes)?  It happens only with this key?

  Without knowing what the pop-up box, it is difficult to provide targeted - suggestions, but here are two that might help account given what you have provided.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Maybe that's a problem with the keyboard driver, software, or firmware.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers, software or firmware (and you need to do for the keyboard), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  For anything else (if the above does not solve the problem), we need to know the information in the pop-up box.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP envy 17-J006ED: failed to UPDATE the BIOS

  Hello

  I have a laptop of 17-J006ED DESIRE; Bought in December 2014. On the HP site, he had advice for the update of the BIOS. I downloaded the SP76843.exe file. I run the application directly from Windows; so I did not create a USB drive. I had the idea that the update went well.

  The computer restarted, but I got a black screen. Sometimes the Caps Lock key light flashes twice.

  In this forum, I found the following solution:

  So what I did I a Flash DRIVE to fat32 formatted and named HP_TOOLS and downloaded the latest bios installation exe file. Drag the .fd file you want the downloaded exe file. Then click and there will be 3 options. With the installation of device (removable media) select continue it with her. It will create subfolders and insert the bios file in the right place. It will be converted to a different format (bios file will be decrypted). The above steps have been completed by another computer. Take the corrupt laptop battery and hold the power button / stop for 10 seconds or more. This will reset all active tension. Do not replace the battery but plugging the USB and plug it into the power. Now hold Windows key and the 'B' set key and the power button. Hold the three buttons until the CAPS lock led flashes once. Release the power button and hold Windows + B keys together until CAPS lock led flashes constantly. Wait a few seconds and it will automatically boot via USB on the screen of the bios recovery.

  I followed these instructions. It is not worked.

  Please, help me

  Frans Somers

  Hi @fjgms,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that your notebook does not work after a recent bios update. It will be a pleasure to help you here.

  A remarkable work was done in trying these hearty as a hardcore tech troubleshooting steps. You did awesome troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  Please do a hard reset first. Then connect the battery and charger. Please make sure that the computer is always turned down. Remove the USB key. Press in and hold the Windows key and the letter "B" together with the power button for 5 seconds. He should start the bios to restore automatically. Follow the on-screen instructions. If this does not work, then we have a problem.

  The computer BIOS may be corrupt. The motherboard may need to be replaced or fix the situation in the service center. So, please visit this link to contact Support phone: http://hp.com/contacthp

  I really hope things the excellent work and the problem is solved without hassle. I hope this helps. Please keep me in the loop. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Take care now and have a week coming Holy.

• HP ENVY m6-n113dx Notebook PC: update the BIOS F.22A and keyboard

  Hello

  I was hoping that over time someone would have posted something with a similar problem, I have, but its been a while so I guess I would ask and I hope an answer and I hope I'm not the only one experiencing this problem.

  Awhile back, I upgraded my laptop BIOS (HP ENVY Notebook PC m6-n113dx) from F.21A to F.22A, who apperently offers improved performance of the internal keyboard. After the update, nothing seemed very different. However when I play a game and press a key on the keyboard, the charater would sometimes get stuck on this action of the key as if she was held down. Usually, I just press the button again to stop this action, although this has become an embarrassment.

  I've been reading the forums and found a lot of options for apperently decommissioning of your BIOS to earlier versions, but I would like to know where I can find a how to or may downgrade my BIOS of F.22A to F.21A, especially for my laptop.

  Thanks in advance

  Hello @BCC119922,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the keyboard and wanted to help you!

  This is possible, and you can find the drivers for your product here:

  Drivers - HP ENVY m6-n113dx Notebook PC (ENERGY STAR)

  Select your operating system and then find the BIOS category.  In this drop-down list, you will see the BIOS update for F.22.  You should be able to choose the previous versionsto the right Details.  This will allow you to access and download version F.21 A.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Envy 750-124: cannot get into the Bios of the normal on the envy of 750-124

  I speak not normal Bios and UEFI. I've recently updated to Win 10 anniversary

  Given my http://support.hp.com/my-en/drivers/selfservice/hp-envy-750-100-desktop-pc-series/8499646/model/8819... Bios Update

  who was A0.16 Rev.A.

  Installed and it reset my settings. I need to come back here to turn back on my virtual technology. Otherwise, I can create only 32-bit VM VirtualBox

  https://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/how-to-access-BIOS-to-enable-th...

  Cannot return to normal Bios. I tried Tap the ESC which worked before, screen freezes and I hit enter and the HP logo comes up, tried to hit and also hit F10. As much as I turn power. I have a wireless Logitech K800 keyboard that worked before. I tried a usb keyboard standard ensuring they were on a USB 2.0 port. F2 to display a cold start UEFI bios.

  Them win 10 things don't me settings there, recovery, advanced. Tried all

  I was hoping that HP had fixed the enter the Bios thing with updated Bios if installed. This thing was a pain like that otherwise I'd be a camper happy with this PC, how is it you can not solve this HP?

  Because of disconnect hard drive it hangs just below ground

  The solution is

  I had installed a better Nvidia GTX-950 video card. By hitting the ESC, it hangs and nothing happens. Black screen, although you can see slightly change the colors

  Fortunately both the edge video card and the new Nvidia both using a HDMI cable. So I just plug my integrated video card. Started while typing ESC and the Legacy Bios screen selection came where I choose F10 to enter the Bios of the legacy

  When you perform an update of the HP Bios seems to put everything back by default, in other words on board, by selecting the video edge. Although you can see by selecting HDMI port at startup if you think it's ok.

  I have worked with Dell PC for 15 years to work, it does not matter what card I put in them. At the start, I hit F2 and Bios loads so that bit me. Now I know

  Hope this helps someone else.

• Satellite C855D - how do I remove the key from the BIOS?

  My problem is this, whenever I turn on my laptop when you turn on I see the opportunity to get into the bios
  If I can just remove the key and the key.
  Laptop Satellite C855D linux operating system

  need help please

  You hear the BIOS password?

  The BIOS password can be removed in the BIOS.

• HP ENVY 700-074: how to enter the BIOS on HP ENVY700 - 074 Office to change of dedicated vram

  Hello and good day, I tried to get into the BIOS to change my vram dedicated to 1 GB, right now, I have 128 MB of vram. whenever I press f10, my pc from hewlett packard config and shows no possibility to change my dedicated vram. Can someone help me? Thank you.

  Andherewego, welcome to the forum.

  You press the correct key (F10) to enter the BIOS setup.  However, I do not think that you can change the setting of VRAM.   Generally, HP does not provide this option.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Envy m6 1125dx: how to upgrade the bios and uefi without a hard drive

  I can't install OS, including Windows 8.1 discs. After that I get so far along, installing Windows says there is no hard drive, but it's there!

  I see that my BIOS is outdated. When I download the new BIOS from hp.com, I get an executable file

  which of course does not work on a computer that does not start. I can't find the bios file when I run

  the executable file on another laptop.

  So, I want to update bios and uefi to see if that helps with my problem.

  The current Bios is F.11

  Fred

  oakman2 wrote:

  SP66782.exe is what I get when I download from the HP web site. It is a windows executable that updates the

  The BIOS on the computer that runs it.

  I don't think it will run without windows is also running.

  Quite true.

  See the image below.

  What is necessary to do is to extract the sp66782.exe file to a folder on the second computer.

  Rename A 018, 4. FD file to 018 has 4. BIN and save it to the root of the USB stick.

  Plug the key into a port on the computer laptop problem.

  Press the power button / stop the laptop and immediately press and hold the Windows key and the B key until the phone reacts and starts the BIOS recovery.

  If all goes well, that will recover the BIOS corrupted with the new copy which is on the flash drive.

  There is a detailed description of another method to do this on the thread of the forum according to 3rd party.

  https://www.BIOS-mods.com/forum/thread-success-solved-semi-bricked-a-HP-DV6-3225dx

  Using this method will result in certain risks that you have to accept if you decide to follow this way to unbrick your laptop. Any update of the BIOS manually is risky.