HP envy 4512: Hp envy error 4512

Similar Questions

• 7640 ENVY: ENVY error 7640 "There is a problem with this printer"

  Hi guys. I had this printer 4 months ago and it worked as wonderful. But this weekend when I turned it on the error "There is a problem with this printer" appeared right after it connected to my wireless network.

  I did several tests and the error comes only if the network is connected to the internet.

  When it is not connected to the internet fine print (prints, scans, all via wifi) jobs.

  I have a MAC and airport Time Capsule.

  Is there a set any that solved the problem?

  Now it's working. The problem was Auto IP. Set it to manual and it started working.

  Thanks in any case.

  Concerning

• HP Envy 4512 all-in-one: is the HP Envy 4512 all in an e print an ink or laser jet?

  I never gave much thougt before but am now need to set up my printer for greeting cards and they want to know if it is ink or laser - I can't find this information in any of the documents I received.   Is someone can you please help me identify this product - inkjet or laser printing type?

  Thank you!

  Rita O

  User/technically limited product!

  The HP Envy 4512, as well as all of the printers, Deskjet, Officejet and Photosmart, Envy are all ink jet printers.

• 4512 envy: envy 4512 cartirage pigmented or tinted ink

  I would like to know if the ink is pigment based or pigmented?  Thank U

  Envy 4512 a pigmented black ink and ink color of dye based.

• HP ENVY printer 4512: unable to scan to the chromebook using hp ENVY 4512?

  I use a Chromebook and I have a printer hp ENVY 4512 and I tried to use the scanner on it but it is not picking up my Chromebook. I can print but not scan. Is there anything I can do to get the scanner my printer to pick up and scan part to my book of chrome? I appreciate any feed back, thank you.

  Hello

  The operating system that is supported for want 4512 is Linux, Mac and Windows. ChromeOS is not supported, so there is no drivers

  available for scanning.

  Kind regards

  Dhruv

• ENVY 4512: 4512 ENVY too high HP printing

  Hello.

  I'm having a problem with my printer. For some reason any boring, my ENVY 4512 printer now prints more than usual. Example: printing a document every day with border and then I print the Word document. A few seconds later... the draw comes out with the top border, cut and a large blank space at the bottom below the border. I've checked everything. Paper size, paper type, aligned to the printer, rebooted the printer... probably I could do. A printing test, again and nothing at all has changed.

  More detailed specifications:

  • 6th generation of Intel Core i7 processor
  • WiFi to printer
  • Printer is right next to my computer
  • Very good Internet connection
  • Normal power
  • Word of 2016
  • Stationery
  • Authentic HP ink

  Please come back to me @Nethersuperstar.

  Did you try the driver generic and have the same result?

  It may be a problem with user accounts, please try the following to see if it will be useful.

  From the Control Panel, go to user accounts, change account settings, then drag the slider down to never notify, and then restart the computer and try to print the new Word again.

  Thank you!

• HP Envy Wireless 4512: Make a hard copy too long

  I'm just going to do a "copy" of a bill that I have and it took 8 minutes to print the copy. This printer always takes too long or should I do something? My old HP printer printed in seconds. Thank you.

  Hi @Nanz2,

• HP ENVY 4512: cannot print on 2 faces - HP ENVY 4512

  I want to print 2-sided documents directly from the printer.

  I changed the settings on my laptop to HP to 2-sided

  But the printer will not print one side

  Is it possible to print the 2 sides of the printer itself?

  Hello

  Looks do you copy (similar to photocopiers), no printing. No, you must print using software on your computer. The copy feature supports only one side. If you want that all the sides, you have to do manyally.

  Kind regards.

• HP ENVY 15 t-k200 CTO: "INCORRIGIBLE ERROR WHEA" on HP Envy

  A bit ago I was using my laptop HP Envy, as usual, just to watch a video on Youtube, when it crashed and I got a blue screen with the error 'WHEA_UNCORRECTABLE_ERROR '. My boyfriend suggested that maybe it was a driver that requires an update, so I was going through the list of drivers in the "Device Manager" and I was almost with the list when I had the 'WHEA_UNCORRECTABLE_ERROR' even once.

  My laptop is fairly new, I got it in March, so I don't know why I get BSOD.

  Anyone have an idea what is wrong? I'm afraid to use my laptop for what it is now because of this.

  Yes, my problem has been resolved. I had to send to HP to fix it and they had to replace the motherboard. I have not had this problem since.

• ENVY 4-1215dx: HPConnectedremoteservice.exe errors

  Yesterday HP ENVY 4-1215dx laptop computer my wife started having problems with the screen flashes every 10-15 seconds, and when you enter, the letters should be retyped because they do not take the first time.  The laptop is running 64-bit Windows 8.  The PC has restarted last night, but it does not solve the problem.

  This morning I ran a tool called MiniToolBox, and he found several errors to HPConnectedRemoteService.exe.  An example of one of the mistakes is below.

  Application errors:
  ==================
  Error: (23/04/2015 07:28:29) (Source: Application error) (user :)
  Description: Failing the application name: HPConnectedRemoteService.exe, version: 1.0.1218.0, time stamp: 0x5078a573
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
  Exception code: 0xe0434352
  Offset: 0x0000000000047b8c
  ID of the process failed: 0xfdc
  Start time of application vulnerabilities: 0xHPConnectedRemoteService.exe0
  The failing application path: HPConnectedRemoteService.exe1
  Path of the failing module: HPConnectedRemoteService.exe2
  Report ID: HPConnectedRemoteService.exe3
  Failed package name: HPConnectedRemoteService.exe4
  Flaws in the application related to a package ID: HPConnectedRemoteService.exe5

  Error: (23/04/2015 07:28:29) (Source: Runtime .NET) (user :)
  Description: Application: HPConnectedRemoteService.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  The exception info: System.PlatformNotSupportedException
  Battery:
  at System.ServiceModel.Channels.TransportManager.Open (System.ServiceModel.Channels.TransportChannelListener)
  at System.ServiceModel.Channels.TransportManagerContainer.Open (System.ServiceModel.Channels.SelectTransportManagersCallback)
  at System.ServiceModel.Channels.HttpChannelListener'1 [[System.__Canon, mscorlib, Version = 4.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089]]. OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  to System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  to System.ServiceModel.ServiceHostBase.OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  at SwitchBoard.Utils.WCFServiceHostUtil.setupService (System.Object, System.Type, Int32, Boolean)
  at SwitchBoard.SwitchBoardService.RunService)
  at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
  at System.Threading.ThreadHelper.ThreadStart)

  After finding these errors, I went to control panel > programs and features and a repair for HP connected remotely done, it does not solve the problem.  Then, I uninstalled HP connected remotely, restarted, and the problem seems to be fixed.

  I need HP connected remotely to what whether?  If so, how can I download a new copy that works?

  Gary

  HP no longer offers the connected Remote App is not available in any app store.  This review:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03748009

  It is not necessary to the operation of your computer and if you have any problems, simply uninstall it.

• HP envy phoenix 860-170vr: errors

  I just got this desktop, hp Envy Phoenix 860-170vr and I have any other problems. Dozens of error messages and I can not use more then 5 minutes and it stops any kernel or another error. I received many mistakes, including the failure of the core of the security check, kmode exception unhandled etc etc... I have also the screen flashes and the conputer all freezes contastly. Help?

  dawn101

  I read your post about the problems with your new HP PC and wanted to help.
  
  You should not have problems with a PC this new.
  
  While this PC is still under warranty, contact HP customer care directly so that they can put you in contact with HP Technical Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP Envy 5661: Error 1706

  HP Photosmart C410 has replaced by HP Envy 5661.  Installed the software using the new disk.  New printer works fine. At startup, the following error message appears: "error 1706 no valid source could be found.  How can I get rid of this message?  Thank you.

  Hello @Mike1244,

  Thank you for your response.

  Appreciate your efforts. We will give him another chance. Try the following steps:

  • Click http://ftp.hp.com/pub/softlib/software13/COL34152/mp-109793-3/PS_AIO_07_C410_140_408-5.exe and install the HP C410 printer to your computer.
  • In the connection type window, select "Connect to a printer" more later option and complete the installation.
  • Restart your computer.
  • Go to control panel of configuration-programs and feature - select all of the HP Photosmart printer entries and uninstall them. (You can also use CCleaner or other programs to uninstall)
  • Restart your computer and check.

  Hope that helps. Let me know!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Envy 4520: Registration error of the HP Envy 4520 with Google Cloud print

  I followed the instructions to use settings in chrome to save my HP Envy 4520 with Google print clouds.  I get to the point where I went to the printer to press OK, it will display"add printer, then after a while, I get this error message:

  Was able to complete registration

  An error has occurred. Please check your printer and try again

  The printer using the WiFi.

  Hi greenturtle

  Thanks for your reply, but I'm not using the Chromebook.  I followed the instructions by using the settings in the chrome browser.

  I found another way to activate Cloud Print, so I'm OK now.

• HP ENVY 17-j005tx Notebook PC, AccelerometerSt.exe - open pop - start up of the system error

  Hello

  I use a HP ENVY 17-j005tx Notebook PC with the latest installed Windows 8.1.

  Whenever I start my computer, I get the following pop-up message:

  "AccelerometerSt.exe - system error - cannot start the program becaue mfc110u.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  I don't know how to fix this? There are a lot of questionable research sites that offer downloads for these "missing files" but I'm sure that's not the solution.

  Could someone possibly offer me some advice of bette?

  Thank you in advance.

  Hello

  The missing dll is part of HP 3D DriveGuard - you can download and reinstall this software from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards

  DP - K

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray