ENVY 4512: 4512 ENVY too high HP printing

Similar Questions

• HP Envy 4504: Envy 4504 photo prints too red with print quality = better

  Hello

  I hope someone can help.

  On my HP Envy 4504 photos are printed OK print normal quality, but when the print quality is set to best photos are printed to the red. In addition, with DPI Maximum printing photos are much too red.

  This takes place two times printed on paper Normal and on Photo paper

  With the GIMP, I tried to make an example of how a photoprint looks like.

  I made the example by changing the color Balance: Red cyan - about + 40:

  (my GIMP is Dutch...)

  

  Here is the result:

  LEFT: Photo printed in normal quality; Photo on the RIGHT printed in better quality:

  

  I have already completely remove the software HP Envy and did a clean reinstall. No change.

  I have print-head - cleaning cycles (2 times); color of HP-testprint strips looks very good: all are strong in alignment is correct

  Unfortunately: No picture change in best quality still too red.

  The ink levels are okay.

  Any suggestions what is wrong and what can solve this problem?

  Thank you for your support

  Kees-Jan Timmer

  Hi @Kees-Jan,.

  Welcome to the HP Forums!

  I noticed that your HP Envy 4504 prints photo is too red with print quality = best on Windows 10 operating system. I'm happy to help you!

  Where a setting is disabled, with GIMP, have you tried to print photo quality with other programs? If so, what happened?

  You use genuine HP cartridges or refills?

  None of your ink cartridges are low or empty?

  In the meantime, please make sure that all the steps in this guide, fixing poor print quality are executed. And let me know what happens!

  Thanks for posting and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP Envy 4520: HP Envy 4520 does not print Word files double face on wifi, only on USB

  I posted a question earlier of not being able to print wireless from my Macbook Air on my new printer Envy 4520. I then gave a follow-up saying: I had solved.

  What I didn't know then, was that it would only print MS Word for Apple Mac unilateral files Wireless 2011, but if the USB cable was connected, it would be too two-sided printing. Also, I didn't know that my dose to get the printer working wireless also gave rise to no sweeping wireless.

  I just spent two hours with a HP technician on the phone and work remotely on my laptop. It solves the problem of scanning wireless, but not the two-sided with MS Word printing problem. We have established that I can print a PDF to preview or Adobe duplex wireless, though. So the problem seems to be with Word.

  My old dead canon printer replace this one, I had no problem to print documents duplex wireless.

  Any suggestions how to solve this problem?

  Microsoft Forum:

  "If you are able to print correctly in Word when connected with a cable, then Word works correctly." The wireless part has absolutely nothing to do with Word, Word has no features built in wireless. Wireless communications are between the operating system and the printer driver: the word is out of the picture at this point.

   

  The sad truth is that since HP has faced financial problems of a few years back, they have reduced the test driver, especially with the less popular operating systems like OS X and Linux. A lot of windows users who use less popular programs like Microsoft Publisher have also more difficulty with HP printers. "They just don't have enough in their R & D budget more to test each program in each operating system."

  What seems the most likely issue. It is a prlobem of dirver. Perhaps in a future version of the HP Mac driver, it will work. Do not hold my breath.

• HP Envy 4502: HP Envy 4502 - do not print all colors

  I just bought the HP Envy 4502 last night. The printer is hung high and printing. The problem is that the colors are not loyal to the screen. This isn't the pink, red, Orange and yellow print correctly at all and the Blues and Greens are lighter than they should be. I cleaned printer heads and looked through all of the settings to see if I missed something. Wal-Mart wants to return the printer just to replace the possible defective color print cartridge. Thought that I ask here before you do this.

  Thank you!

  Hello

  I would say the same thing.

  In case you want to contact HP Support by phone, call 1-800-474-6836 or click on http://support.hp.com/us-en/contact-hp

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• HP Envy 5530 won't print computer this weekend.

  HP Envy 5530 won't print computer this weekend.  I turned off and unplugged.  Bought on 25/10/13.  It has happened, but this time cannot operate.  Impressions of my iPad.

  Thanks for getting back to me SammyAmazon!

  I am happy to know that you can print again!

  Remember to mark our thread here as "accept as Solution" since the problem seems to be resolved.

  Have a great weekend

• 7640 ENVY: ENVY 7640 does not print the test page

  The printer test page will not print.

  I reinstalled several times print driver and lost countless hours trying to solve this problem.

  HP trouble shooting game software didn't say he cannot solve the problem, the troubleshooter in microsoft is not a problem.  I followed the recommendations of this link:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-envy-5530-won-t-print/TD-p/3510285

  I also tried all the recommendations in this link:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/envy-7640-won-t-print-anything-except-...

  Same results.  I can get the diagnostic report to print from my computer, I can scan, but do not print.

  I got the latest installer: EN7640_117, I used all HP diags who say that they solve it.

  What is the next step?  I'm about to throw this printer out the window!

  I was able to solve the problem.

  Returns the printer in the store that I've gained since.

  Went to another bank and purchased and EPSON.

  Unboxing, put in place and was printing within 15 minutes.

  Should have done a week ago.

  HP I will never buy one of your printer products!

• When I print business cards, they print sometimes 1/4 too high, but not always.

  I have my business cards in a Word document by using a template Avery. I used the same file for years. I never had a problem with my Canon printer, but after buying an HP Photosmart D110, I got nothing else problems. When I print, then they print approximately 1/4 in. too high ruin cardstock and waste. This happens not all the time. Sometimes I print and they are perfect but when I come back and print another, the problem returns. It is the same strain of the map that I have used for years and when it is inserted in the printer it doesn't matter if it's a single page or a stack of them. I tried the page preview before printing and the alignment is correct. I tried to print to PDF and then print the PDF, same problem. I try on the barrel and no problem. Only reason why I bought it was in the first place the cartridges were cheaper and I do a lot of color printing and scanning.  I just replaced the cartridges and did a head alignment is not the problem. I tried it with plain paper and the problem persists. I'm ready to give up anything to join your room and buy another Canon!

  AuntieEm, thank you very much! It worked flawlessly! Hugs xoxoxo

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.

• HP Envy 110 no longer print from iphone or ipad.

  HP Envy 110 no longer print from iphone or ipad. Says' not connected printer. It's that I did all the checks and it prints ok in pc and he's fine, when I send an email thanks to eprint. Everything was fine until a couple of weeks.

  Hello

  Try to restore the default settings of the network printer:

  Click on the wireless icon, and then click settings.

  Click network settings by default and approve any command prompt.

  Re-enter the wireless Menu, select wireless configuration wizard and follow the steps to reconnect to the network yoiur.

  Search for now any change.

  If the same persist - type the IP address of the printer (will appear as the wireless icon) in Safari-can access the home page of the printer?

  In addition, what router make and model that you are using?

• HP Envy 120 do not print

  My printer HP Envy 120 is not printed correctly.

  The printer accepts the job, pages come out of the printer, but the only thing that appears on the page's hyperlinks. I tried printing from three different computers and printed various documents Microsoft word but its all the same impression.

  Is there something you would suggest that I should try?

  Thank you

  I would try the doctor print and scan to see if it will detect and fix the problem automatically

  Try printing HP and Scan Doctor for Windows

• HP Photosmart more B210 - printing is too high on the paper.

  The text is too high on the paper.  I can solve this problem when you generate letters and reports, etc. by simply letting a larger margin superior, but I cannot produce sheets of labels.

  I tried to change the paper size under tray settings/Main properties/device of the "letter" to "A4" - click on apply and OK - but when I check that the setting is always "letter".  Don't know if this is causing the problem, but if the book 'Letter' measures are lower than those of the A4 paper, he could be--and I wondered why I couldn't set this parameter.

  The printer is related to the Windows XP laptop and desktop Windows Vista computers.

  I hope someone can help.

  If the changes are not stick when made directly in the driver, the driver is probably corrupted. Try to uninstall and reinstall the printer driver and software package. I'll link the latest version below. Let me know what happens.

  HP Photosmart full feature software and drivers

• 6500 copies too high to the top of the document

  Printing: 6500 has more E710n-z

  Op sys: Windows 8.1

  The printer prints too high on paper: the 6500 prints even his own test page with lettering half cut off at the top. Printing from Word is the same, so it's not a software or application problem.

  HP update is defined on, and the drivers are the latest: Firmware = CIP1FN1206AR, the version of the software = 028.000.1315.000, 09.84.00.1189 = driver version.

  I saw this issue raised in other - apparently hard for a few years - messages and responses were not useful.

  Can we remedy and suggest or offer a remedy?

  Hi Blennerhasset,

  I understand the printer prints too high on the page and even the test page is cut off. I see that you already have a troubleshooting, but since I'm not sure what you've done already I suggest all initially an alignment;

  1. Load US letter or A4 size, unused, plain white paper in the tray.

• The paper is picked up too soon and the top of the page is still too high

  The paper is picked up too soon and the top of the page is still too high

  I have an HP Officejet 6500 A Plus

  I had a paper jam

  I took out the paper

  As I pulled the paper, now the print jobs are too high on the paper.  It seems that one of the gear slipped a tooth and top of page paper is not aligning properly.

  Hi @Kingvigor

  I understand that since having, and clear a paper jam, the paper is now driven by too early. Let's try the cleaning rollers and an alignment. Open the following document and move on to the solution five; Solution 5: clean the rollers.

  Once it is finished, complete the following steps to align the printer;

  1. On the printer control panel, press the right arrow key (), then tap the Setup icon (). The installation Menu appears.

• Satellite L850 - 150 PSKDLE - a little too high internal temperature

  Hello friends of support.

  Satellite L850-150 PSKDLE - 07L 00
  Slow times get a little hot atm... (60 - 70).

  If I want to change the cooling block, but my problem is how to disassemble the laptop?
  Google does not want of hits on this topic...

  Can someone help me with this?

  Thank you very much.

  In my view the 60-70 ° C are not too high.
  For me high temperature is about 80-90 ° C, but at 60 ° C is nothing unusuall.

  Furthermore, always depends on how you use the laptop and what software is running.

  Play games, you will always notice a higher temperature.
  In General, you should pay attention to the internal cooling fans.
  Dust and debris could be the main reason for a higher temperature and clean the holes and vents should be good enough to keep the temperature low.

  Use compress air jet to get rid of the dust. Usually, this helps.