HP Envy 5530: HP Envy 5530 - incomplete print document

Similar Questions

• HP Envy 4500: Repeat Printing Documents

  Hi all

  I have recently, in the last six months, plug a HP Envy 4500 series all-in-one printer as a gift for my parents. Apparently, he has a problem where it printed a document several times (despite asking only one copy) and will continue to print it whenever the printer is on.

  On my advice, my parents followed the instructions of RESUMES provided here , but it made no difference to the problem. My hunch would be to reset the printer, but of course the menu aboard is unvailable while it's printing. Someone has any advice on what to do to solve the problem?

  Many thanks in advance,

  D.

  Hi @Darius89,

  Welcome to the HP Forums!

  I see that your HP Envy 4500 continually prints an earlier document that was printed. I'm happy to discuss this issue for you!

  Just to clarify, if you leave off the computer and turn on the printer, the printer still print the same document?

  Is this document something that has been printed from the computer? Or is it an alignment page perhaps?

  In the meantime, please try a hard reset by following the instructions contained in this message, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Hope to hear from you soon and thank you for posting!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• HP student laptop: how to print 6 x 4 & 7 x 5 photos on HP Envy 5530 e printer

  My daughter wants to print 6 x 4, 7 x 5 & A4 photos on photo glossy paper through its 5530 mobile & HP Envy HP student e-all-in-one printer series. Is could someone please advise me how my daughter can do this. Thank you.

  @Garry21

  • Install the full feature software to take advantage of features and options of the printer software.
  • Use a favorite program to open / view the photo > in print preview > Printing Preferences (Options) > adjust the size of the paper, type of media (paper type), selection of the status bar and other options

  Sounds too simple - and it can be as simple as that.

  The printer will be probably best to use HP paper - meet other quality brands can work perfectly, too.  In my case, HP Advanced Photo paper always gave good results.

  One caveat: a lot of printers that provide the photo tray bit limit paper size cannot be used in this sandbox to the size of 4 X 6 inches.  It is not always obvious that it is the case; the tray will sometimes adjust large sizes regardless of this restriction.

  For example, if you want to print on paper, 5 X 7,.

  • Remove the paper usually the main tray >
  • Place the 5 X 7 paper in the main tray - the print down side >
  • Adjust the sliding bar (s) to embrace the paper >
  • Use program > print preview / print preferences to tell the printer on the parameters of work >
  • and printing

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  References and help:

  Printer:

  Printer e-all-in-one HP ENVY 5530

  Full software features - 8.x Windows - Windows 10:

  File name: EN5530_198.exe

  Communicate details

  Exit the: 12 November 2015

  Version 32.3

  Reference:

  Install the full features software - printer

  Article (s) of interest include:

  • Preparation
  • Extras and optional > HP, Installation Help and Diagnostics information
  • Restart all
  • Download and Installation
  • Remove the printer software
  • See who and what is on your network

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  The user guide for the 5530 LIKE

  Print Photos - Chapter 3, Page 10

  In the Section How to > Print > Instructions and parameters:

  Creating custom paper sizes

  Print photos (Windows)

  Book - example:

  Photo paper glossy 100-Advanced-HP leaves/4 x 6-in. borderless

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Notes:

  If you can't find the paper size you want in the print preferences paper size list, you can create a custom form (custom size) for your special paper.  The number of parameters available for a custom form is somewhat limited; You can designate at least the size.  Start with such a type of paper (from the list of the available standard types) and the custom form should serve as sufficient results.

  Still available in 8.x Windows, you should find the program in the Windows Photo Viewer.  This is a simple photo montage and a print program that can help to put in place a photo impression basis.  The first time, you can print the picture on plain paper to make sure you get what you expect.

  More help - other programs and print options:

  Print - Programs_and_Methods

  Sections of interest include >

  • Photo Creations for Windows and Mac
  • Printing with the paint - modify Photo shape to fit the paper size
  • Photo printing with Windows for Windows Photo Viewer
  • Whereas the report l / h
  • Printing with paint
  • Printing Documents and Photos 5 X 7

  and

  Printing options

  Article (s):

  Custom paper sizes

  Model custom print preferences

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Envy 5530: Since upgrading to windows 10, my laptop cannot see my HP Envy 5530 iwireless printer

  I have upgraded to Windows 10, since then my pc can't find my HP Envy 5530 wireless printer. I downloaded some sort of doctor scanning HP according to a previous post on this forum, but it does not work and my pc cannot see my printer yet. Please can someone help? My laptop is a Levono Idepad.

  Hey @Rayprinterman,

  I see that you have some problems with printing to your craving 5530 e - all - in - one printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off.
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Close any programs you have open on your PC.
  5. In your search type in printers bar and open devices and printers.
  6. Right-click on any icon of your printer listed.
  7. Click on remove the instrument.
  8. Repeat for all other icons of your printer listed.
  9. Click Add printer, and follow the prompts to add a new queue for your printer.

  Please let me know the results after following the above. If this allows you to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Want 5530, wireless, printing from a laptop Mac and Windows 7

  Hello

  I've just set up my new Envy 5530 wireless printer on my iMac (running Mac OS 10.9), I can print comes it very well, even from my iPhone / iPad. I also posted an e-mail to her address and that works very well, too.

  However, I also have a laptop HP ProBook 6455 b and I'd like to be able to print wirelessly, of him also. But this does not work, I'm unable to install the printer using the "Devices and printers" Wizard on Windows 7.

  I went to:

  Control Panel > hardware and sound > devices and printers > add a printer > add a network, wireless or Bluetooth printer. This printer is not found, even when it is on and the rest of my devices can see and print on it.

  Do I need to download and install the drivers for Windows 7 from hp.com? Or is there something that I am not making the invisible to my Windows 7 computer printer?

  Thanks in advance for your help,

  David G.

  Hi David G.,.

  I understand that you can not get the printer connected to your Windows laptop. You are on the right track, you need to download HP ENVY 5530 e-all-in-one of the printer drivers. Select your operating system, and then click the button "next". Scroll down and click on "Driver - Product Installation software. Click Printer series e-all-in-one HP Envy 5530 full feature software and driver. This should bring up the download page, click on the 'Download' button and I suggest saving it to your desktop and run the installation from there.

  I hope this helps, let me know.

  Thank you

• New want 5530 cannot print

  You just bought a 5530 envy. It prints the test very well page. But send print jobs to him, he only says: "now printing" for a long time. the print queue is empty, then it stops eventually show that. Does not print. Tried to print Adobe files and Word files (Mac). A new printer that does not print has no value.

  I have finallu got to work recently. HP has 2 versions of the download. I got my printer to walmart, so I had to find the download 5531. HP says nothing about it. It acts as a different software. All that says download 5530 but you will need to download the 5531 version if you got it from walmart. See if it works.

• HP ENVY 5660: Connected printer & print desktop PC and tablet. Print & Scan doctor says he is not and cannot be.

  A couple of weeks ago, we changed Internet providers & I plugged our devices (desktop, tablets, phones & printer) in the new system.  We now have AT & T U-verse with a cable of optical fiber to a hub not far from our House & a circuit dedicated copper from there to the router/gateway. They claim that we have a regular service of Mgbps 18.

  Everything seems to work very well. We had anything drop and do not cause any problems. However, our range of printers HP says that it is connected to the Internet. It provides all the correct information and it works very well in our devices. But the Asus desktop computer insisted that the printer is offline, even if I print documents from him. Today, Windows did an update and when I checked the update report that he said he could not update the printer because it is in offline mode and it will not be printed. Then I printed something again.

  This update failure is my real problem. When I checked in the settings in Windows 10 on the desktop, it also insisted that the printer is offline. So I clicked on the icon of the application for the Print & Scan doctor. He also insisted the printer is not connected and that it is unable to connect from the Internet. Yet once again, the printer prints despite this reported disconnection.

  I don't know if the printer is actually updated even if update report says that it is not. I have had no problem since the printer from the reconnect the devices and printer or the update today. After I've done 4 or 5 tries to install the software with printing & Scan app, I checked in the settings of Windows 10 and again, he has insisted that the printer is offline.

  However, earlier, I checked in the settings, printers and scanners again in 10 Windows on the computer from Asus desktop & for the first time it reports "Series of 5660 HP ENVY (network)" & "Serial number (5660 HP ENVY series)" as the customs declaration.  The first says that it cannot print when I tried a test page; but, the other printed a test page. Is the first representative of the scanner and it cannot print because no document has been selected?

  When I created this Asus desktop / printer in February when I bought them, I did it using WIFI only, using no USB connection, to do and the printer has always worked our devices just as it continues to do so.

  Again, my real problem is declared failure to Windows 10 update.

  Thank you for taking the time to browse this message and I thank you for your help.

  Hello
  
  Thank you for using the HP Forums.

  Can you try using a TCP/IP port?
  
  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.
  
  This video resource will show you how do:
  
  Create & use TCP IP port
  
  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
  
  Let us know if it works

• HP Envy 4500: Cannot print with the new Wifi

  I have a new Netgear09 router and everything connected correctly. My HP Envy 4500 wireless printer has been a success with the wizard, and I printed out the specs very well. My computer (Windows Vista) is connected to the Internet fine... but when I try to print a document from the computer it continually-error. What Miss me? I am able to print from my Ipad... but not the PC.

  Welcome to the HP community @Dmk3,

  I understand that you can't print from your Windows Vista system to your desire of 4500 from the evolution of your router. I would like to help!

  Try running the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please send me the results.

  Try to print again, and if there are problems or errors, please tell me what they say precisely and I'll read them for you! Also ensure that you are trying to print outs in addition to a program.

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• 5660 envy: Envy 5660, OfficeJet 8710 and 8720: they can print documents from a thumb drive USB connected?

  ENVY 5660 e-all-in-one printer can print documents (for example, .doc files) from a USB connected to its USB port?

  Similarly, can the Pro OfficeJet 8710 or 8720 print documents from a USB connected to its USB port?

  Thank you

  DaleBr

  Hi DaleBr,

  Any printer PCL3 as the Officejet Pro 8710, 8720 support only Photos of pritning from a USB (JPEG and BMP), it cannot print the document files such as ir PDF DOCX to a thumbdriver, but only to a computer...

  The HP Envy 5660 only support printing Photos from a device memory too, but only from SD card, there are not any USB port for a USB.

  None of the models above can only print from a computer or a mobile device...

  8730 Officejet Pro which is a postscript printer to print PDF, Word and Powerepoint support files directly from a USB (Latin characters), however it is a commercial product and cost more as such:

  http://store.HP.com/us/en/PDP/HP-OfficeJet-Pro-8730-e-all-in-one-printer

  Kind regards

  Shlomi

• HP Envy 4500: HP Envy 4500 - photo print half off the page. Print very well.

  All of a sudden, my HP Envy 4500 failed to print all the images; documents continue to print OK.  For photos, the printer acts like it's works fine to start, but print only about half of the photo on the paper - it seeks to print the rest on the back of the photo a lot of ink rollers...

  Research forums, this is the EXACT problem I have:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-envy-4500-prints-only-half-of-the-photo/TD-p/3781222

  I have uninstalled/reinstalled drivers, try to print from a different computer, laptop and even tried what was suggested in the post above - to copy a picture of the scanner on the printer itself.  Who printed still only half of the picture...

  The consensus from the link above was a hardware problem.  My printer is no longer under warranty, so unless there is another thing I can try I will buy a new printer.   This one isn't worth it for me to pay to ship somewhere to remedy.

  Any last suggestions until I have this gift to local traffic (with a note that it only prints documents)?

  Hi @JPotter,

  You can contact HP customer care to find out what service or the recovery options are available. Check the model number and the form to receive a file number for faster assistance.

  Thank you!

• HP envy 7640: hp envy 7640 not print not the pictures folder

  HP envy 7640 will print if I type in Notepad and controls hit and p. The problem is when I try to print from the pictures folder, that a window for sending a fax. I can't print anything in the pictures folder.

  Hi dennistomlin,

  Thank you for your answer!

  Please, try the steps in the following order:

  • Uninstall the software.
  • Start the computer in minimum mode.
  • Disable all Antivirus programs.
  • Disable all firewall programs.
  • Create a new user account.
  • Connect to the new user account.
  • To help reinstall the full feature software and drivers.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that these measures are useful!

• HP 5530 e printer: my 5530 has suddenly stopped printing.

  My e-5530 not printed. The connectors are properly connected. Blu-tooth is running. I have the e-mail address of HP. The printer worked fine before.

  Thank you

  Hello AnnieRooney65,

  I want to offer a helping hand with the printing problem, that you have with the 5530 LIKE. You are unable to print, by means of printing, or you cannot print from the computer too? You have errors or blinking lights on the printer? Running the HP print and Scan Doctor can help us to determine what is happening, whether it's a hardware problem, driver problem.

  Start printing and scanning Dr. choose USB connection or wireless (based on the current connection) and allow to know the results.

  Hope to hear,

• HP Envy 5540: Printer Hp Envy 5540 randomly printed the Network Configuration Page

  Hello!

  I bought this printer about a month ago. Set up the connection to the printer wireless with my wifi, and my understanding is that the printer is protected like my wifi and use the same password in order to print something. I kept my printer connected and 'standby mode' since I put in place. The night last at about 23:00 when I was in bed, the printer turned on randomly and printed a "wireless network configuration page" that has had a lot of information, including the IP address and listing my name wifi as well as the names of my neighbors wifi in the surrounding apartments.

  I'm trying to understand why this printed, because I certainly did not do. Anyone have access to my wifi, or has someone may simply try to print something and selected my printer as it should appear on the "list available connections on the computer of anyone, given that the printer is turned on? How could they print this sheet of network configuration if my printer is password protected?

  I'm mostly concerned about someone who has access to my internet if they could print this page somehow, but maybe it happened just when they tried to connect to it, and it did not work while trying to fix MY printer?

  I would appreciate any idea on the issue.

  Thank you!

  Hi @printerprob5540,

  Welcome to the HP Forums!

  I saw your post on how your HP Envy 5540 randomly print a Network Configuration Page. I'm happy to help with this problem!

  I find it very strange considering the only way to print the Network Configuration Page, AFAIK, is with the following steps:

  • Make sure that there are size A4 or US Letter, unused, plain paper in the feeder.
  • On the printer Panel, drag the screen to the left and then press Setup.
  • Touch tools.
  • Drag upward on the screen and then tap Network Configuration report.
  • A Network Configuration Page prints up to three pages of information.
  Figure: Example of a Network Configuration Page

• HP Envy 4500: Cannot print Photos and large documents on my HP Envy 4500 all-in-one printer

  Hello

  I bought my Hp Envy 4500 all in November last one. It worked like a charm for the first 2 months. I tried to print photo 4 x 6 a day. 2 first impressions were good, and the third image has begun to fade from the half. Documents not threatened by more than a few pages. I tried to uninstall/re-install, printing via USB, set static IP address on the print and followed by other solutions on this forum. I was lazy to lift a question myself on this forum. Now, I'm totally frustrated and disappointed by this product, I wanted to just try my luck.

  Help, please!

  Thank you

  Fox

  Hey @Kvelrajan,

  Welcome to the Forum from HP Support.

  I understand your ENVY 4500 HP e-all-in-one printer is not printing documents to the end and there is a print quality problem when you print photos.  I would like to help.

  I have some suggestions that can solve these problems.

  First, I recommend that you only perform a "hard reset":

  1. press the Power button to turn off the printer.
  2. unplug the power cord at the back of the printer.
  3. wait 60 seconds.
  4 reconnect the power cord to the back of the printer.
  5. press the power button to turn on the printer.

  Click on the title of the following article:

  HP printers - HP wireless built before 2010 printer print a partial Page or fails to print all Pages in Windows 8

  Try Solution two.

  If this clarify two questions, great!  If this solves the problem of document but still the problem of print quality with photos, click on the title of the following article:

  Printer prints a blank Page or does not print black ink color for the HP ENVY 4500 and Deskjet Ink Advantage 3540 e-all-in-One Printer Series

  Work your way through the Solution one and go until you are satisfied with the print quality.  Test photo print - does clarify the issue of the photo?

  Please let me know the result of your troubleshooting by responding to this post.  Feel free to click on the "Thumbs Up" icon below, if I solved your problems.

  Have a great day!

• ENVY 4500: My printer ENVY 4500 guard disconnection (no WiFi)

  My ENVY 4500 guard printer disconnect sporatically. One minute I can print correctly, either the printer could not be reached. The printer status "the printer is not connected.

  This continues to be of all devices, not only my iMAC. I tried my laptop, my iPad, iPhone. Same story. When it fires, he died for all devices. I tried to reinstall the printer, tried to restart, unplug. Nothing seems to fix.

  If I print the report directly from the printer during this time, it says everything is connected and no problems found (see attached image).

  Then after awhile, like an hour or two later, all of a sudden the printer will spit on all the prints that were in the queue.

  I contacted support and they connected to the printer and reset some settings, and it started working, then a week later he did it again. She continues to do maybe once a week or more.

  I don't know what to do more. Anyone have any ideas?

  

  Hi @valiik,

  I wonder, have you tried to set a static IP address? Your HP printer static IP address assignment

  Please let me know.