HP envy 6-1202eo: Windows 8/10, 0xc0000034 error.

Similar Questions

• Envy 17 - j020us Windows 7 drivers missing

  Hello

  I just bought a HP Envy 17 - j020us today. It came stock with Windows 8 is installed and I have, for my own reasons, decided to install Windows 7 above. Long story short, the installation has worked, for the most part. The only problem was that I was missing some drivers. I searched and found http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ENVY-17-j020us-windows-7-driver... which was very helpful. However, there's still about 3 pieces of material that is not installed, the drivers with the network controller. I have attached hardware IDS and compatible IDS is available upon request for any "missing" material below. Can someone help me find the drivers?

  Network controller - hardware ID:

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086

  PCI\VEN_8086 & DEV_0887 & CC_028000

  PCI\VEN_8086 & DEV_0887 & CC_0280

  Feature 'Unknown' - hardware ID:

  USB\VID_138A & PID_0050 & REV_0060

  USB\VID_138A & PID_0050

  Feature 'Unknown' - hardware ID:

  ACPI\INT33A0

  * INT33A0

  Any help would be appreciated. Thank you

  Hello

  Please try:

  1. network: http://ftp.hp.com/pub/softpaq/sp57501-58000/sp57976.exe

  2 validity sensor: ftp://15.217.49.73/pub/softpaq/sp45001-45500/sp45050.exe

  3 Please try: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20866

  Kind regards.

• I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8. It is a Tablet dual boot. I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.

  I have a PIPO W3f 10.1 inch Android 4.4 + Tablet PC in Windows 8.  It is a Tablet dual boot.  I'm stuck on the Windows 8.1 with the side Bing with an 0xc0000034 error code.  I have tactile and available USB.  Any help would be appreciated!  Also, once I get Windows running again how do I start to Android?  This option is missing.

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem may be due to a corrupt or damaged files in the system partition or boot record that are required for Windows 8.1 start successfully. You may need to run the automatic repair of Windows 8.1.

  However, I would recommend at this point, contact the manufacturer of the Tablet for the best support possible, since you use dualboot.

  Please respond to this topic, after you talk with the manufacturer so that we can continue to research the issue and help you accordingly.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Windows Media Player C00D11BA error after upgrade (?) to Windows 8.1 8.0 on the urge

  I have one:

  HP ENVY 15 notebook PC, nuber of product: C8P47AV

  8.1 pro 64-bit of Windows

  Intel Core i7-4702MQ CPU @ 2.20 GHz

  NVIDIA GeForce GT 740M

  #1 AudioDevice: Intel(r) Audio display

  #2 AudioDevice: IDT High Definition Audio CODEC

  After I've upgraded to Windows 8.1 and was playback of an MP3 file, I got this Windows error mseesage, "Windows Media Player C00D11BA error" and no sound. Many required devices as their drivers updated and completed.

  Please advise,

  Mike

  Hi Mike,.

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Once complete, download and reinstall the Chipset driver from the link below.

  Chipset Driver - Windows 8.1

  When you're done, shut down the laptop by holding down the SHIFT key when you click Shutdown to temporrily prevent a hybrid boot.

  Only start the laptop and let Windows load completely - it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - restart the computer and try to play the mp3 file.

  Kind regards

  DP - K

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows has encountered an error unsupported wireless adapter FIPS140-2mode bynetwork profile

  I am trying to connect to a D Link device, all right, but when it comes to the network card I get a message saying that Windows has encountered an error wireless profile, not supported by the NIC FIPS140 - 2 mode.

  Help would be appreciated.

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2 are computers on the environment?

  I suggest you try temporarily disabling security software and check if it helps.

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If you are on the environment, it would be better to post the same question in the Microsoft Technet forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope the information is useful.

• Recently went from Outlook Express to Windows Live Mail. Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  Recently went from Outlook Express to Windows Live Mail.  Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  You will need to ask here:

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

  And you need to display an error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.

• While trying to connect to the VPN Windows, I get an error 868. What does that mean?

  original title: connection to the VPN

  While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.

  Vijay Kapnadak

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Windows Update 8007371 B error code «»

  I spent from Vista to Windows 7, use PCMover to help transfer. I'll have two problems (1) won't install Norton anti-virus (Norton is okay) and update of windows gives me an error code "8007371B".  Any ideas? Thank you

  Try:

  Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2http://support.microsoft.com/kb/947821>

  The 0x8007371B error can be caused by an irregularity of the system that theSystem Update Rpoints Tool may be able to solve. However, the tool may be unable to fix all instances in which these errors occur.

• Windows 7 update 8020001 error code.

  can not update windows because of the error.

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?

  Hi Barcini,

  ·        This error message do you receive when you try to install updates?

  ·        What updates are you inviting to install?

  You can run the Windows Update Troubleshooter & check if the problem persists.

  Open the Windows Update troubleshooting tool

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• Windows XP update 0x800b0100 error code.

  I tried Microsoft fix, he tried the internet search tried everything but keep getting error 0x800b0100 what the hell I'm doing?

  I tried Microsoft fix, he tried the internet search tried everything but keep getting error 0x800b0100 what the hell I'm doing?

  A summary of the update of windows and fixes common problems has been done which may be useful

  See this thread my answer

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-message-trying-to-update-Windows-XP-SP3/0c7f9b23-A258-48c7-8940-dc81a94426fd#LastReply