HP ENVY 750z desktop PC: transfer Hp Recovery on USB

Similar Questions

• ENVY Phoenix Desktop - 850-065: Add the port ethernet on the desktop

  I want to add a second ethernet port on the desktop... any recommendations, the Gathas, the various factors to consider... I seem to have three ports of extension on the PCI bus... one of them would be the target (or what)... any recommendations on ethernet brand and model to consider...

  Any wisdom on the subject will be sincerely appreciated...

  Hello

  There are many models/products of ENVY Phoenix Desktop - 850-065 series. In any case, according to your description you can use a normal PCIe 1Gig card. There are a lot of cards around, 1 port, 2 ports or more. Please make sure that there are drivers CD or at least it shows you where to find driver (from the site of the manufacturer).

  Kind regards.

• HP Envy h8 desktop computer - 1440t: storage drive and graphics card upgrade

  I bought my desire Desktop 3 years at hp store. Now, I would spend my disk storage and the graphics card because I wanto to speed up my computer and also I bought and new screen (screen 32 inch HP ENVY with Beats Audio Media) which has displayport but my graphics card is not.

  My office has:

  -First HDD: 1 TB, 7200 RPM, SATA
  -Secondary hard drive: 1 TB, 7200 RPM, SATA
  -Graphics card: GeForce GT 640 (3 GB)

  -Power supply: 460w

  And I want to upgrade those parts for:

  -Hard primary: 960 GB HyperX SAVAGE SSD SATA 3 2.5 (7mm height)

  -Graphics card: one of them

  * NVIDIA GeForce GTX 660 2GB GDDR5 PCI Express 3.0 Graphics

  Card TF N660 2GD5/OC (first choice)

  * GeForce GTX 680 (2 GB)
  -Power: 600w

  But I don't know if it is possible to do the update.
  Can someone help me with this?
  
  Product name: HP Envy h8 desktop computer - 1440t
  
  Product number: C1U78AV #ABA
  
  OS: 8.1 Pro 64 bit Windows

  JoBla, welcome to the forum.

  It is becoming increasingly difficult to ensure that the latest components will work in an old computer.  Your computer is almost 3 years old.  My suggestion is to choose the SSD and the video card you want to buy and contact the Technical Support of the manufacturer to determine if it will work with your computer.  They are the experts on their products.  This will save you the possibility to pay for the return of one of them.  That's what I did and it works fine.

  I can recommend a PSU 600W (PSU), however.  I love Corsair products.  Here is a very good power supply.  Read the reviews to see what users have to say about it.  There is a modular version of it, too.  The modular power supply is good for medium-sized cases.  It allows you to use only the cables that are absolutely necessary.  Which makes for airflow and better cable management.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Transfer of recovery system of USB drive to DVD disk

  I have read the forums and I see that you can transfer DVD USB recovery but can you make the USB on a DVD. Is this possible? I'm a computer tech and not an average user, so I can understand if it's complicated.

  I was in the hospital when I did the recovery on USB disk and was not thinking. He saved me trying to repartition my hard drive and inadvertently deleted my recovery partition. I didn't have access to blank DVD media at the time and when I got home, I wanted to have a copy on DVD for the Image. I am currently using a 32 GB SanDisk USB flash drive and won't eat up to 12 GB of space for recovery.

  I'm more concerned it's complicated to do because I am an advanced user. If you can help me, I would appreciate it.

  P.S. I love all your products. I only use HP printers and laptops and I am in love with this computer for HP Pavilion series laptop g my sister is for me off of eBay. You guys rock!

  Or you can call HP to order a set of recovery disks. Usually around $17. 800-474-6836.

  You can usually order via a link on your models also support page. It will be in the list of drivers/software.

• HP recovery media does not, need to do the second set of recovery on USB media.

  Hello

  I have a new HP Envy laptop that I have created a set of recovery on six DVD media.  These work very well, but are a pain in the end to keep pending next DVD to load.

  So I tried to make another recovery media and place it on a USB key.  Discovered, that it will not allow a second value created.

  So I then ordered and paid for a recovery of HP media.  A beautiful labeled Microsoft USB key came. Great, I thought.

  My laptop because of my fault I failed and wouldn't boot.  So I decided to use my new HP USB stick and after that go into the BIOS and disable the boot from USB stick and start secure etc as he said to it returned with an error that "this computer can not be recovered from this media!"

  I then pluged in my DVD - ROM external and used drive recovery media that I did and it worked perfectly!

  I tried the live chat with a technical person of HP and they checked the serial number and said I got what should work.  They could do a repair ticket and send the laptop.

  It makes no sense to me as I have the unit upwards and running, but I wanted to know how I could get a USB work recovery media.

  I ended up saying goodbye as they were of no help.

  My questions are:

  (1) why this media does not work?

  (2) is it possible to make a second set of recovery media?

  (3) is there a way to transfer my recovery media DVD 6 on a USB?

  OLD POST > I first noticed the order said it was a pn 735088-002 and a sticker outside the wand that has the same number, BUT when he looks at a name on the flash drive is 735088-DB2... >
  

  UPDATE:

  The new USB recovery media came today from HP.   He had again the same top part number that the original order has been 735008-002, BUT this time the corresponding came USB drive name to the tile. 735008-002 , I inserted this new media and it is fully charged.

  Thank you for all your help.

• How to use the recovery on USB media?

  Kindly tell me how to use the recovery on USB media? I deleted the my laptop's recovery partition and I am facing problem to restore previous windows during the upgrade to windows 8.1.

  Hello

  I'm really sorry, I made a mistake and posted the link to your subject (subject) here at the forum.

  The real link for this problem is-> http://support.hp.com/us-en/document/c03489643

  The instructions are the same

• I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator

  I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator... also not able to remove all the data from USB key

  Good so take a look here

  Run the FixIt first, then if that doesn't work, see these topics:
  • Faulty, misconfigured or missing device driver
  • Out-of-date firmware or BIOS
  • Incorrectly configured root hub
  • Remove and reinstall all USB controllers

• HP ENVY Desktop - 750-167c: HP recovery media creation

  I recently bought a HP Envy desktop computer and I tried to create a recovery media and I get a message saying that the partition does not exist. The machine is Factory reconditioned.
  
  What are my options to move forward. I'm guessing that the mahcine should have this partition when it was "reconditioned."

  Thank you.

  #HPExpertDay

  I suggest you call HP support that could take a command remotely on your computer to see what goes wrong, and then if necessary, they might send you a series of recovery Image factory (depending on the situation).

• Envy 14 K110nr: Cannot recover system recovery media, associated with PININST_BBV

  I have a HP Evny 14 K110nr. In short, the system upgraded to Windows 10, started acting weird about a month after:
  Lose access to resources (Task Manager, desktop, Control Panel, etc.)
  Defective devices (wifi, bluetooth, etc.), suspended connections, System Restore gave a lot of mistakes.

  Tried to fix the system, nothing worked (even the DISM restorhealth was not working and suspended 40%)

  Long story short, I tried to recover the hd partition and could not complete successfully, same thing happened with my recovery media.

  At the end of the recovery attempt, I get a BSOD and system resets. It was a loop like that for awhile.

  Ran Diagnostics, no errors, but I suspect it was the HARD drive as the mentioned system errors on it before the collapse.

  I replaced the HARD drive and started the process again, this time I have not received any BSOD, but after completitng, I get a message saying that the recovery was incomplete. Just now my system is a Clipboard and consider Ubuntu if I can't up the widows, but it makes no sense. I read through several threads that referred to this issue and I don't know if I've seen any absolute solution to this issue (none have worked for me so far). Here are a few:

  http://h30434.www3.HP.com/T5/notebook-recovery/recovery-incomplete-cannot-get-any-further-than-Inser...

  http://h30434.www3.HP.com/T5/notebook-recovery/after-disk-recovery-restoration-incomplete-error-ERRO...

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/m-p/25...

  http://h30434.www3.HP.com/T5/notebook-recovery/HP-envy-6-1010ea-boots-into-Recovery-Manager-attempt-...

  http://h30434.www3.HP.com/T5/notebook-recovery/dv4-ChkErrBB-cmd-detect-some-error-during-PININST-BBV...

  At the end of my mind, that has persisted for more than a week. My computer is literally a week or two longer under warranty, HP thank you.

  Hi @braveally,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you upgraded to Windows 10 and then the system started acting weird about a month later with the loss of resources. and malfunctioni devices. You tried to do a restore but received many errors.  Then, you tried to do a system repair, but no luck. You tried to do a recovery from recovery and recovery but Media Manager once again without success.  At the end of the restore process, you have a blue screen and the system resets and goes in a loop.  You have run a complete diagnosis and all spent and that you have received error on the HARD disk before you replace it.

  You proceeded to redo recovery and you do not have the BSOD, but after, you have received the message that the recovery was incomplete.

  Here is a link to HP-HP System Recovery troubleshooting (Windows 8) computers that can help.

  You can also try booting in safe mode.  HP computers - Windows Safe Mode (Windows, 10, 8).

  If the problem persists I try to clean the optical drive, and then try using the recovery again.  You can try to clean it with compressed air or a disc to clean the disc. Also, check your disk recovery for stains or damage.

  You can also try to boot any disk from Windows and reformatting the drive to start over with the recovery.

  If it breaks down again it is likely that the discs and you will need a recovery kit.

  Contact HP to Contact HP Support assistance

  Please reply back with the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• HP ENVY PHOENIX 800-060: transfer windows want to 800 motherboard again - 060

  Hello

  I bought this new computer there is a little more than two years and now I tells me that the motherboard and power supply have out crapped on me. We could think of a motherboard should last longer than that, but I digress...

  I would replace the motherboard so that I can save the rest of the computer. Is it possible to transfer my license windows from the old motherboard to the new? Or I have to buy another license?

  Thank you

  Greetings,

  I hope that you back up the important things on several external media and in the cloud until it happened.

  The failure of food fry the HDD/SSD or any other component?

  You can contact HP to service here.

  HP will replace the motherboard and the MB of tattoo. This would allow you to use HP recovery media to bring the system to a factory State. You wouldn't need a new Windows product key.

  Do you make or buy HP recovery discs before this catastrophic event? It appears your PC comes with Win 8.0. Recovery media, you can order here.

  HP will reinstall Win 8.0 if you replace the defective components and tie the mother of replacement HP factory for the chassis number of the system (tattoo).

  If you replace the motherboard on your own, you can buy a new Windows product key.

  See you soon

• HP Envy 15 JI22TX I7-4700NQ: Delete recovery Partition

  I have HP Envy I7 laptop computer (HP ENVY 15 I7 - 4700NQ 8 GB 1 TB Win 8.1), it has 1 to and recovery partition hard drive, all of a sudden it was shown that not allocated, then lost my all data and Partition Recovery also lost now I want to get the recovery Partition to install windows os and all my means of laptop drivers help me

  @GayanW: sounds like the hard drive died suddenly on you - which occurs.

  Once you can do is try to make a hard drive from the BIOS test.  The instructions are at the link: http://support.hp.com/us-en/document/c00439024
  
  After back here with the results of the tests.

  IF this confirms that the hard drive is dead, then you must do the following:

  (1) replace the hard drive

  (2) order the HP recovery media

  (3) reinstall from the recovery media

• Care about HP ENVY h8 Desktop PC motherboard

  Hello

  Does anyone know the specs of the motherboard for the new desktop ENVY h8?  In particular, I'm looking on the desktop HP ENVY h8 - 1420t.

  Thanks, Pete.

  Hi, Pete:

  I can't find the 1420t but I found a 1420ef.

  http://support.HP.com/us-en/document/c03132942

  I'm sure all the 1420's would have the same motherboard.

  Paul

• Warranty issues on HP Envy 750xt desktop

  I just bought a desktop HP Envy 750xtand have a few questions about warranty options.   LiveChat is down or I would have asked them!  in any case, here are the questions:

  1. what guarantee do the funds come with, it is 90 days a year, or more?

  2. What is the best warranty available for this desktop computer?  I found this one. This is the best?  It covers hardware problems for all 3 years (as if the hard drive or motherboard should go wrong, for example)?

  3. Finally, if I end up needing to put a CPU cooler in (I opted for the 980TI i7 - 4790 k and gtx), which could result in the cancellation of the warranty?

  Thank you!

  Hello @Grawlix1,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.

• -USB - HP ENVY PC Desktop 700-074 wireless receiver

  Buy HP ENVY 700-074 Desktop PC. I carefully unpacked and configuration system.

  Mouse and wireless keyboard does not work.  I checked and rechecked for a wireless receiver in the package. No not found.

  Is it possible that I'm missing a USB receiver or is it a built-in feature?

  Called the best buy. Apparently no USB receiver not packed with the mouse and keyboard.

  Thanks HP!

• HP ENVY 750se desktop PC: turn around blu - ray player?

  Hello

  I just got the desktop PC HP ENVY 750se with Blu - ray burners and burner DVD SuperMulti burner.

  Everything works fine. My problem is the orientation of the reader.

  It would have been better if the reader was prepared horizontally.  Not happened.  HP box should go on the right side of my desktop, drive is mounted vertically, and this is my chance that the orientation of the player opposite me who puts Assembly and disassembly of the ackward media CD/DVD/Bluray and quite a twist of the wrist excersize.

  Until I opened the box and experiement if I can go back to the disc, so he faced me, is this doable from a material point of view? Or is the disc material permanently set to this position to damndable?

  I think that my last resort is to order my office by placing the box on its side and to serve as a basis for my monitor.  If the Player cannot be reversed, ok to run the HP box on the side?

  Any help or advice appreciated.

  Thank you.

  Hello @Ryck,

  Thanks for the reply!

  If you place the office in a horizontal position, then the event must be correct upwards?  I don't think that should be a problem.  However, if placing the office horizontally, covers the vent, so I do not recommend it.

  I hope this helps.

  Kind regards!