HP ENVY laptop - 15-k103nx (ENERGY STAR) Bios fan problem
Dear Sir.
I just got my new
HP ENVY laptop - 15-k103nx (ENERGY STAR) for 7 days now
It was a prefect job until she can make update started giving an error when booting up to the
"THE system BIOS has detected a possible problem with the cooling fan.
The cooling fan is an important part of a laptop. Operating a laptop for a long period of time with on the cooling fan can cause permanent damage to the laptop.
Cooling fan (902) ENTER - stop
I searched for this error and the solution was to update my bios and I must therefore my bios is now F.33 and until the same problem someone can help or I have him go to the store > thank you
Thank you
That's what I was doing.
I give back it to my dealer and I got new Asus labtop
Tags: Notebooks
Similar Questions
-
Please could someone tell me where I could download the driver for this laptop audio beats:
Laptop HP ENVY - 17-k200ns (ENERGY STAR)?
Hello
Bat should be included in the Driver Audio Realtek High definition (HD):
http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69618.exe
http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-notebook-PC-series/7527536/model/7709875
Kind regards.
-
Hello everyobody.
Yesterday I bought a laptop HP 15-r138nl (ENERGY STAR) and after more than 2 GB of updates automatic HP Support Assistant, shortcut keys still does not. I tried many drivers developed for other products, such as book Pavilion or elite, with no luck: whenever a pop-up message saying "this driver cannot be installed on this system. It is a troublesome problem to tune volume and shine expecially...
Any suggestion will be appreciated, thanks!
Hi @baccinelli,
Thank you for visiting the Forums HP's Support and welcome. I read on your keyboard keys do not update on your HP laptop - 15-r138nl. You could try in the Control Panel, clock, language and region, language, click on advanced settings in the left pane. In the advanced settings, click Change Language bar hot keys.
In text Services and input languages, click Change Key Sequence button and select the key sequence.Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system that may be missing or not up-to-date.
If this does not please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the linkfor the number of support in your region. They will be happy to help you immediately with all the parts that might be needed.
Thank you. -
HP laptop - 14-ac180nd: HP laptop - 14-ac180nd (ENERGY STAR) RAM upgrade
I want to upgrade the 2 GB RAM of my laptop HP - 14 - ac180nd (ENERGY STAR). Is it possible to replace the 2 GB card for a larger RAM as 8 GB?
If you do not go back on that, the answer is no. Since you have the model Celeron memory is soldered on the motherboard and is not removable or expandable. I'm sorry.
-
HP laptop - 15-g255sa: HP laptop - 15-g255sa (ENERGY STAR) ram upgrade?
can I upgrade my ram on my laptop HP - 15-g255sa (ENERGY STAR) I have a 4 GB of ram and would he move to 8 GB of ram so if what ram would be good for this.
Hello
Yes, you can upgrade the RAM 8 GB laptop supports DDR3L-1600-MHz.
Supports single channel memory -
My Hp Support Assistant wants me to update my bios...
I have two questions regarding this.
1. the software to Flash the bios is not compatiable with windows 10. It will be safe to run anyway? (Yes, I have installed a free update to windows 10)
2 sp71055.exe f42.ap1 (corresponds to the file, it is recommended to run to my i7 from intel, patch notes (always never enough information) provide that it restores or that it provides the original bios.)
My bios version connected is
BIOS version / date f/34. 12-19-2014
On a previous occasion, I thought I already flashed the bios and I was wondering if I need to restore to the original version, or it turns out is a bit 'off '.
The link you have provided updated the bios with no ill affects (for now!) Thank you for your help
-
Recently I formatted my laptop after returning from Windows 10. Unfortunately, I had to do it through hard-wiping instead of software reset or rollback. Now, I can't get my fingerprint reader to work. I found almost all the drivers for my laptop via this Web site and tool for detection of HP model except for the fingerprint reader and its software (SimplePass), which is weird because I downloaded the installer of the driver on this site once the detection tool has led me to the page. How can I get that back?
Hi @PhilbertSelda,
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your problems with the download of the fingerprint software and HP ENVY 15z-j100 CTO Notebook. Here is a link to your page of model software the software Fingerprint is located under the Security section of the software.
Here is a great document for troubleshooting the fingerprint reader. If you need it.
I hope this is what you need.
-
17-x013ds HP: HP laptop - 17-x013ds (ENERGY STAR)
I recently bought VTIN SWAN Sport Helmet (VBT006) and have been unable to pair the device with my laptop. Help or suggestions please?
Hello
You need a USB adapter as according to the technical specification your laptop doesn't have Bluetooth and wifi:
https://www.Amazon.com/Medialink-Bluetooth-adapter-energy-technology/DP/B004LNXO28
Product number -
HP laptop - 15-f272wm: upgrade ram HP for laptop - 15-f272wm (ENERGY STAR)
Can I put my slot single 4 GB 8 GB Ram. I know that the types must match. I just need to know if this computer supports upgrading to 8 GB or 16 GB. Thank you
Yes, you can:
A SODIMM non customer-accessible/upgradable (Pentium, Celeron processors) memory module housing
As you already know, you have a Trail Bay processor which means that you have a single memory slot and Yes, it can be improved to a SO-DIMM 8 GB DDR3L-1600. See page 30 for memory upgrade instructions.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
HP ENVY Phoenix 800-019eb (ENERGY STAR) desktop PC (E3H43EA)
Hello
In this PC is a NVIDIA GeForce GTX 680 with integrated graphics Intel HD Graphics 4600 (GT2).
I wonder if it is possible to extend this PC with exactly the same graphics card with this integrated graphics card.
It is not possible. Intel does not PCI express video cards.
Integrated graphics is a HD graphic chip, not a card, which is built into the chipset of the motherboard.
Best regards
ERICO -
HP ENVY laptop - 15 - ae101no: control of the Volume on the keyboard keys do not work!
Hello
Volume control keys had suddenly stopped working, and I have no idea why. I have the model HP ENVY laptop - 15-ae101no (ENERGY STAR). Could you please help me fix it? Thank you!
Hello
Try the following.
Download Realtek HD Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe
When finished, press and hold the Windows key and press R
In the run window, type devmgmt.msc and press to enter.
In Device Manager, expand sound, video and game controllers. Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe
When the reinstallation of Chipset is finished, stop the laptop.
Disconnect the power adapter and then hold button power supply for 30 seconds, then release.
Plug the power adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation. Once this done, reboot the laptop and let windows load completely for a few minutes before checking.
Kind regards
DP - K
-
Hi all
I have a problem installing the BIOS via HP assistant. It starts to download the latest version of Bios (110 Ko..), and finally the HP Assistant fails to install the bios.
what I've done: uninstall the old version of HP assistant and install a more recent version. The problem continues to insist
Any idea or suggestion?
Concerning
Georgios
Welcome to the Community Forum of HP.
Comment
Your computer Support pages:
HP laptop - 15-r124nv (ENERGY STAR)
Reference:
It is the opinion of the Expert that you shouldn't depend on HP Support AWizard when it comes to BIOS updates.
According to other factors in the system at the time when the HPSA trying to hit your system with an update of this type; the results could be... other than expected.
You can set 'Notification' HPSA to prevent it from trying to update your BIOS.
DON'T update the BIOS when you see an update in your Web page of the computer AND that this update can be used to provide a fix for a problem that you have discovered in your system. In other words: If your computer is happy, do not update the BIOS just because you think it would be a good thing to do.
If you decide to update your BIOS
- Make sure that ALL backups are up-to-date and complete - this means that everything you need to restore the system in case something goes wrong.
- Understand that even when you do everything exactly right, you can end up with a bricked computer, that is an expensive paper weight.
- Make sure you have at least your critical data on some form of external backup.
- Unplug the USB drives and other useless material. Desktop keyboard and mouse can stay connected.
- Always run power cable to update the BIOS, never on the laptop battery
- Touch the system during the update is underway
- Optional: Leave wireless ONbutton. You could turn off the router to ensure that there is no interruption.
If you still get into trouble, see: restore the BIOS
Click on the thumbs-up Kudos to say thank you!
And... Click on accept as Solution when my answer provides a fix or a workaround!
I am happy to provide assistance on behalf of HP. I do not work for HP.
-
HP laptop - 15-r103nx: laptop HP - 15-r103nx (ENERGY STAR)
- Hello, I will buy
HP laptop - 15-r103nx (ENERGY STAR), but before
I need to know on whats inside the laptop
IM asking what is the Wifi card version?
I really need to know the name of wifi card and the type
Hello, you're wrong, I disassembeled the laptop, the wireless card can be improved...
-
EliteBook 2740 (Energy Star): hardware problem
Hello
First and foremost, I must say that I didn't know where to put this question to me, so I apologize if my question here is fake, but I thank you if you answered my question is, I'll do it.
I have a laptop, Elitebook 2740 (Energy Star) models.
If I understand correctly, this model should be a multi-touch. I installed all the drivers for all the hardware, but its touch screen feature works only with a pen!Have the opportunity to touch the hand?
(With Windows 7 Professional and Windows 8 have tried but not succeeded with the possibility to activate touch me)
How to activate it?
Thank you very muchThe unique touch pen model was standard. The screen touch multitouch finger was optional:
http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04111684
Natively, WIndows 8 would have drivers that would allow full functionality of touch if he does that with a pen in Windows 8 you do not have the option multi touch screen. There are no economically viable way to move a finger touchscreen, to anticipate your next question.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
OMEN of HP for laptop - 15-5010nr: Hp Omen back light problem
Hi, so it confused me for a long time now. I have this problem where my backlight ISN'T want to change to any other color but BLUE and its only the right side of the keyboard. The Start button / stop and the speakers are an exception to this decision apparently. I don't know exactly when it happened, but it has affected my computer for a while now. At this point im thinking a factory reset might do the trick, but I don't want to go through the long fight to take back to his feet. I was wondering if anyone has any suggestions? I would be grateful helps it a lot because I love the ability to color, but I'm limited its use. If necessary I will add a picture of this. Maybe someone has this problem too? And I use a HP OMEN for laptop - 15-5010nr (ENERGY STAR)
Hi @ - Voltaire -,.
Yes, it is possible that the led had burned.
Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Maybe you are looking for
-
I regularly backup on iphone and ipad with icloud. I don't know how to access the part of this backup on my Safari browser on iphone. icloud.com url only works on a Windows laptop Thank you Geoffrey
-
When I send an iMessage since my iPhone 6 to my friends android, that it appears as a VZWpix.com email. Why?
-
-27 cl Pavilion dv7 - 6 c - hp muo9 notebook batteries battery so my small icon in the corner says connected but does not support. I tried all the things uninstall, disconnect and connect again but his does not work. I did a check of the battery and
-
HP pavilion g6 2241 his: power of hp pavilion g6 241sa failure
Hello forum members my query is, my problem was, Ive had several spills coffee light on my hp Pavilion 2241sa g6, al ive cleaned, new keyboards restarts etc, then for 3 months, he just put on the table with the battery, because the last attempt of cl
-
Windows 7 - need help to install Microsoft Network Version 2.0 Framework 64-bit
I need help, I had someone install Windows 7 Ultimate on my laptop. I have the 64 bit version, I read some of the other forums and I Framework 3.5.1 installed, and I get a message each time I log on that says "Microsoft Network Version 2.0 Framework