HP pavilion g6 2241 his: power of hp pavilion g6 241sa failure

Similar Questions

• Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  If AirPort Express light does not illuminate, this indicates that the internal power supply inside the Express did not, and the device will need to be replaced.

  If you really a 802.11a/b/g in the Express version, it is at least 8 years old and probably much older than that.  Average life of this product was about 3-4 years, then you have had surprisingly good luck with your product.

• HP Pavilion g6-2241 his laptop: Cyberlink in HP Notebook

  I have a HP Pavilion Notebook PC (G6-2241sa), using MS Windows 8.1.

  When I open programs and features , I see "CyberLink YouCam".  Yet, when I type "Cyberlink" in the start window I see, as well as "CyberLink YouCam", I "CyberLInk PowerDirector" (version 10).

  When I check the specs for my laptop I see I wish "CyberLink Power DVD".

  The "CyberLInk PowerDirector" and "CyberLink Power DVD" the same?

  Should I also CyberLink LabelPrint, because it seemed to me have had before and a download is free?

  [What is the best way to find out where, in the Forums, my request should go?]

  Hello

  You can ddownload and install the software that is missing from the following links: these are the free versions available at HP.

  CyberLink LabelPrint

  CyberLink PowerDVD

  Kind regards

  DP - K

• My iPhone 6 guard making his power on and off loading when it is connected with the MacBook Air early 2015

  Hi Please help me. My iPhone 6 retains what load noise when connected with my MacBook Air early 2015. It makes me crazy! I tried with several real Apple's USB cables, update to the latest iOS (phone and MacBook), updated the iTunes, clean the orifices, everything! I just got this MacBook on the Apple store. Please help me! Thanks in advance!

  Hi mikaelaridz,

  I understand that you just bought a MacBook Air in an Apple store, and when you plug your iPhone 6 in it, you are to hear a sound indicating that the connection does not work.  If your MacBook Air has a port USB - C, you must use the USB - C for Lightning cable to connect your iPhone.

  Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later

  Port USB - C

  USB - C is an industry standard generation that allows to load and transfer of video data - while a simple connector. Your MacBook comes with a USB - C port:

  

  Through this port, you can:

  • Charge your MacBook.
  • Power output.
  • Transfer data between your MacBook and other devices.
  • Connect the video output such as HDMI, VGA and DisplayPort.
  • Connect to other technologies, such as Ethernet.

  Port USB - C on your MacBook supports data transfer speeds to up to 5 Gbps (USB 3.1 Gen 1).

  USB - C for Lightning cable

  Apple USB-C for Lightning cable allows you to connect any device equipped with a connector of lightning with your MacBook. It provides data transfer and power of lighting fixtures. For example, you can use this cable to connect your MacBook to these devices:

  • iPhone, iPad and iPod touch
  • Magic Mouse 2
  • Magic keyboard
  • The Magic Trackpad 2

  You can also load these devices without using your MacBook by connecting to the C - USB to the lightning cable and plug the cable of the USB - C 29W power adapter.

  USB - C for Lightning cable supports data transfer at up to 5 Gbps (USB 3.1 Gen 1).

  This cable requires no power to operate. However, devices that you plug into it could draw power from your MacBook, you should unplug it when you're not using it.

  If this isn't the issue, then I suggest taking your new MacBook Air and iPhone at the Apple Storewhere you bought it.  A genius can inspect your computer for you, there is no hardware problems and staff can help you set up.  Here's how Contact Apple and make an appointment.

  Take care

• Laptop does not recognize his power cord

  It has been requested, but anyone know why a laptop can be plugged and not even recognize it? I would hate the thing be a goner when the battery will eventually not.

  Tugs on the power cable will break the socket on the side of the machine leaving a bad connection to the better and no connection at worst. If you do not get repaired as soon as possible, there will be no way to charge the battery...

• Backgammon Internet came with my Windows XP. It has worked well for years, then quit the sound. By clicking on "his power" in the options does not help. Help!

  I tried the "sound on / off" in the game options. The speaker volume is high, but the game has more noise.

  shastaman,
  Here are a few things to try.
  The problems of sound in XP

  You can turn off the game (uninstall) turn it on (restore).  To do this follow the steps below.
  Click Start > Control Panel > Add / Remove Programs > (on the left side of the window) Add/Remove Windows components
  Select accessories and utilities, and then click Details. Select games, and then click Details; then uncheck Internet games and click OK to add/remove Windows components > click Next > click Finish.

  Restart your system and then repeat the steps and put the check mark back next to games on the Internet.  Then test after the reboot.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv6t 7000: failure of the BIOS (Caps lock flashes twice a secone)

  My laptop model number is Pavilion dv6t 7000. In recent days, he had a problem. When I turned off my laptop and put it off, the next day I find that is not starting. A black screen, caps lock shift is blicking twice and f12 key is red (WIFI). Nothigs happen. Then, I searched and came to know that it is the failure of the bios. Then I tried some way and nothings worked. ATLAST when I remove the cmos battery it set again after 2 or 1 minute its starts fine. Then againg I turn off the computer and its power day following again the same problem. I was to solve this problem by removing cmos battery and put it again for 4 or 5 days. But today this tip does not work. I tried so many method like (Windows key + B), (byholding down the power button for 1 minute), (Flash UEFI) etc. to solve the problem of failure of the bios, nothing worked at all. What is the problem?  Is this really a failure of the bios? How can solve this problem? What is a dangerous problem? There the chances that my laptop is completely exhausted?

  Hello
  beep codes or led lights will Flash at the start of the system may indicate a hardware fault or BIOS you say you have tried all the troubleshooting steps
  
  I would like to run the hardware check to make sure it's all working please follow the guide below for instructions and report:
  
  http://support.HP.com/us-en/document/c03467259#AbT1
  
  Tests using UEFI diagnostics and run the quick test
  
  Thank you
  James

• HP PAVILION 1015TX M6: failure of the BIOS update F.26 F.27

  My machine was originally Windows 7 Home Premium, and then when Windows 8 came out, I bought a license for Pro 8.1. Updated the FW since then to F.26A and no problems at all.

  Now Windows 10 was released, updated for the new OS, put an SSD to give more subsidy, adding memory and 16 GB is now running on a Micron 256SSD.

  Recently, Windows 1607 came out, I got the update and noticed that my internal webcam does not work. I thought about updating everything I can find and saw a new firmware version F.27. Downloaded, run the executable file, looks very promising and then restart that he arrested! If there was a way to do it using a USB via Windows executable, I can do it but it's too late.

  Can you please help me restore / recover my BIOS of laptop computers? Now if I turn on my laptop, the screen is blank and I cannot see that the WiFi led is lit in orange. I tried windows + B key too and if I do that I can see the caps lock flashes two times goes off, Wifi led remains lit in orange, then after a few seconds caps lock flashes again. I am so desperate to fix this again and I don't want to throw it.

  Can someone in the HP please help or anyone who has the experience to restore / recover my BIOS?

  I downloaded sp77669.exe and sp66782.exe, followed steps http://support.hp.com/nz-en/document/c02693833 but it does not give me the next step to extract it on USB, it just runs and tries to attempt to run the executable insyde. Of course it will fail because I use a HP device just for this previous bios on a USB key. Step in here is misleading in some way, because I don't get the option to create the usb bios recovery. I tried to use 7zip to open the executable file and I can find all the files Roma or bin inside.

  I fixed it now! hoooooray!

  Here are the steps so I did... and then summarize

  (1) removed the CMOS battery for a day (24 h), battery not attached either.

  2A) set the CMOS battery

  2 (b) connected AC, you press the Windows key + B, then held the power button for 3-4 seconds and then release

  (3) did not work

  (4) tried again, repeated step 2, still nothing

  I went desperate... you need a HP HDD to another machine that still have the recovery partition.

  (5) power removed, removed my SSD drive temporarily took my netbook HP HARD drive and put it on my computer pavilion laptop of m6.

  (6) repeat step 2

  (7) not working, lock shift always blink and light up orange Wifi signal

  (8) turned off, which held the power button for 30secs or more

  (9) repeated a step 2 again and viola, the LCD turns on again, then I got an invalid checksum error CMOS and says it will reset the bios Setup with its previous version and I saw it from 0 to 100%. I don't have what it does in time so I let him finish and it restarts and started access my OS HARD drive, of course I don't want to start from it, so I just shot it extinguished/turned on and tested so it will try to start now and he did.

  (10) off, place my SSD back and restarted

  (11) happy again...

  Just so to be sure it it will always start upward and to confirm what version of bios, ive got, I stopped him again.

  Check the bIOS version and I got the latest bios version f.27 LMAO! This thing happened to step 9 0-100% must be a continuation of the update stopped. It didn't reset it instead it just finished off the coast of the update. isn't that great! Perhaps maybe this a defect on the update of hp in the process. (With 1) win10 OS and 2) an SSD is maybe a problem with the update process if you do the OS, I'm just speculating. The operating system that is supported on the site isn't until Win8, although technically, they are the same win8 family and 10 but who knows. I suggest if you got the same setup as mine, do the update regardless of the OS, start from a USB Pendrive and up-to-date in this way if you'll be lucky to find a bootable version.

• HP PAVILION DV9418CA: HP PAVILION DV9418CA BIOS FAILURE

  I have hp pavilion dv9418ca laptop
  I tried to update my bios or you can try to flash., bt my lappy obtained frisottés hours after somtym installing I dropped nd will remove e battery so can extinguish., happened after I tried on wat see bt, he used to JUST GOLD U CAN SAY WHITE SCREEN BLACK SCREEN startup
  I read on so many forum is not a good answer can someone help me pls., if its the bios failure so how to recover it or permanently damaged his motherboard.,?

  This might help:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/fixing-A-laptop-which-had-had-a-bad-BIOS-upgrade/m-p/225042#M1016

• Pavilion g6-2123us: failures of Touchpad. Material?

  I am running Windows 8.1 on a g6-2123us Pavilion I bought in 2012.  For some time now, I had a few annoying problems with my touchpad.  Occasionally, that it simply closed.  And it was made more common as time goes on.  When these events occur, the entire touchpad does not, including the power button, as if the unit had been simply unplugged.  I tried a variety of things to fix including uninstalling and reinstalling the drivers several times using the drivers from HP Web sites both Synaptics.  I went to the 'mouse' in the Panel and used fitness devices to zero that worked very well.  A few times, just put the computer to sleep for a short period of time, too, will do the job.  However, as time goes on, these things work less.  Could this be just a problem of internal material with a loose connection?  Alternatively, just too tired device?  If one, can it be fixed?

  Once again, I've replaced and updated the drivers several times, so I know that option won't work.

  Thanks for the help

  Hi @rschwarze,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP Pavilion g6-2123us Notebook PC and having problems with the Touchpad, click on the button not work properly or freezing. Here is a link to troubleshoot the Touchpad. If you go to the section on the score setting TouchPad and ClickPad sensitivities should help solve the problem.

  Please let me know how it goes.

  Thank you.

• Need manual for the p6226f Pavilion, hard drive failure possible

  Hello, all. I was given just a Pavilion p6226f who was on his way to recycling when the friend thought of me. Now, if I can fix it, it's mine. I don't have any information yet, or manuals. I know he has Windows 7 on it, but that's all. My questions:

  1. I tried to find a manual, but couldn't find one yet. They are downloadable on this site?

  2. where can I find a list of key functions F which uses HP? They are standard (and standards still exist)? Total noob here.

  3 HP integrates a function of recovery on a partition on their readers?

  4. could you recommend a guide to troubleshooting somewhere that I can follow?

  Any help you can give would be greatly appreciated.

  Thank you

  PS Gallant Fox was the name of a triple crown winning race horse.

  GallantFox wrote:

  1. I tried to find a manual, but couldn't find one yet. They are downloadable on this site?

  Hello

  Tons of them are in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=4006062

  Kind regards.

• Pavilion dv7 2282eo failure HDD?

  I have a year old pavilion dv7 2282eo, which worked great for me all the time I have opposing it, but now he has broken a few difficulties.

  Yesterday I went shopping and when I got home all I could see on the screen of comp. was a bluish sort of background and a ugly crusor. I rebooted and got an error message saying that windows had a problem requiring a fixation. He finsihed the start and I got the same blue screen and crusor, but without icons or buttons whatsoever.

  Then, I ran a quick test of the hard drive in the BIOS and received the error message "quick (303). Does anyone know what this means? I can solve this problem? Or do I have to get a new hard drive?

  Please answer me, I feel a little desperete.

  I'm sorry if my grammar is disabled, I'm in Swedish

  olofolof wrote:

  It's an intel dual core 2.2 ghz I think.

  What is graphic switchable?

  Plug here.

  I should also mention that I tried to boot from my recovery CD as well as the recovery partition, but all that happens is that I get the same blue background. I think it's the Windows Installer screen but there is no icons or anything.

  Thanks for the reply!

  Switchable graphics is a portable dual graphics solution.  A low-power integrated graphics chip is used on battery. A superior graphical power module is used when connected to the power adapter.

  Did you do a test of memory via the BIOS?

  The error (303) fast is a prediction of disk failure hard iminent. Which can be solved by replacing the hard drive.

  It is also why the recovery disks do not work. Once you have installed a new drive, and the operating system installed and working I can provide a link to a Sofpaq that has the reputation of being able to restore the partition recovery and F11.

  Best regards
  ERICO

• Pavilion g6-2070se: failure to success

  I want a link to download bluetooth driver & .net framework appropriate to the meaning cool hp

  Have you tried Windows 8 pilots posted to your model? Not much 8.1 drivers listed, but the 8.0 drivers should work.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2000-notebook-PC-series/5226244/model/5252999#Z7_3054ICK0K8UDA0AQC11TA930O2

• HP PAVILION HARD DRIVE FAILURE

  I had a failure of hard drive about nothing. Could not restart (HP Pavilion 15 230 her) wouldn't boot and clicked. The ID is U0C40K-76U7AE-MFPV61-60UQ03 (some of the zeros may be 'o', hard to say). Can I fix it myself? Lap top is 3 months old.

  Hello

  Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  As always, your laptop will be under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United Kingdom, contact HP here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Test HP Pavilion dv4 boot failure

  My HP Pavilion laptop dv4 (product ID: WA683UA #ABA) was in courses run really slow so I tried to restart it. After this startup fails every time. I ran a start-up test and got a breakdown of 0U7W11-52D61K-XD7U2J-60V103 ID. Above all he says is 1 hard drive and as the starting Test failed. I have a bad feeling that this means that my hard drive needs to be replaced. My computer is no longer under warranty and I don't want to put a lot of money.

  Hello

  It doesn't look like your hard drive is defective and must be replaced - it is a fairly simple procedure and a brief overview of it is below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K