HP ENVY m6-1125dx work occasionally. Bad driver? IDT Audio

Similar Questions

• Driver IDT audio in Windows 8.1 for DV6-6140us

  Hi brothers!

  i cant find IDT audio driver Windows 8.1 for DV6-6140us in the website of hp, I'm from Argentina. all solutions? I have no sound in my laptop.

  See if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124991-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0027

• Satellite L50 - A - DTS IDT audio driver for Windows 10 required

  TOSHIBA should update drivers IDT DTS Sound for Windows 10
  It is impossible to listen to the audio without it, the program itself works, but there is no change when I move the sliders, it's the same clear sound basis without any bass...

  I use windows 10-64 bit, TOSHIBA Satellite L50 - has [P6K...]

  Tags: audio sound dts, dts, toshiba satellite, l50 - a

  I had the same problem with my Toshiba A 1j1 c50. My DTS sound with the equalizer did not work as well. First, I tried to reinstall the driver dts but that did not work. What DID do the work is the following: download the latest version of the driver IDT audio (not the dts driver), run it and click on repair. After you restart your laptop, you should be able to change the sound settings dts and again hear a big difference in the sound. I hope this will help you.

• Bat IDT audio driver

  Hello

  I recently bought a

  HP Pavilion dv6 Notebook A2T47EA #ABU

  After recently update HP assistant and installing new software audio beats has disappeared! I get a cannot find the file startup error message.

  How do I get it back?

  Hello

  Yes, definitely reinstall the old driver IDT audio .

  Kind regards

  DP - K

• HP Envy M6 1125dx running Windows 8.1 and my fingerprint reader/single pass does not work

  Hello

  I'm not able to use my finger print reader/single pass, now that I've downloaded windows 8.1

  Read a few other questions and difficulties people exercise but were not able to always operate.

  I have a HP Envy M6 1125dx

  00179 60246-20486-AA0EM

  64-bit Intel Core i5

  Running Windows 8.1

  Thank you

  Hi Ricksd,

  Welcome to the HP Forum.

  If you still have an old driver Validity Sensor in your system, you may need to upgrade to one that supports 8.1:

  sp58869 validity sensor V4.4.234.0 Win8

  If you still use an older version of the HP SimplePass software, you may need to upgrade the program.

  If you have recently upgraded to 8.1 Windows, make sure that all of your Windows updates are up-to-date.

  If everything is already at the level of the correct version, then you can get away with just reset the drivers:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  If the Hard Reset does not help,

  so check out this guide for advice on how to relax program in order:

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

  Dragon Tip: Export your SimplePass Webcards!

• HP ENVY m6-1125dx HDMI driver for w8.1

  Hello

  I have a HP Envy m6-1125dx who still uses windows 8. In January, I've upgraded to 8.1 but my hdmi port had some problems. If I connect a monitor or TV using hdmi, the screen is black and white and very 8-bit graphics as. The hdmi port and the drivers work very well on windows 8. This seems to be a driver problem. When I had these problems, I downloaded the latest drivers on your support for this model site. The most recent of 10 to 2013, which I believe is around when 8.1 has been released. The pilots did nothing to solve this problem.

  Because a working hdmi port is important for me, I went back to windows 8. I see now that Microsoft will push people to update their windows computers 8 or possibly start for not having supported and security problems. I would like to be able to update this computer that I use for work, but I need it to be able to connect to hdmi.

  Will there be new drivers fate soon for this? Are there drivers that I'm missing? It's a little frustrating that a computer that is about a year and a half (a little less then a year when the 8.1 came out) is taken in charge of driver, as much as it can not be moved down to windows 7. I hope that we move upward with a solution to my problem until I update again!

  Thank you.

  Brandon

  Hi, Brandon:

  Have you tried the Intel W8.1 directly from Intel graphics drivers?

  https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3711&DwnldID=23714&ProductFamily=Graphics&ProductLine=Laptop+graphics+drivers&ProductProduct=3rd+Generation+Intel%c2%ae+Core%e2%84%a2+Processors+with+Intel%c2%ae+HD+Graphics+2500&lang=eng

  BTW, your model can easily be downgraded to W7 x 64 using the drivers and software of envy m6t-1000.

  Do not use any of the BIOS or firmware download.

• Touchpad stoped working after 5 m from the entrance of win8 HP Envy m6-1125dx

  Of the United States, I recently bought a laptop HP, HP Envy m6-1125dx. It comes with Windows 8 64 bit. The problem is that when you use it, 4 minutes of logging into the BONE with my account, the touchpad is not responding, I can't move the cursor, make clicks or the operating system multitouch gestures. The double tap on the upper left side of the touch pad isn't works, whose function is to enable or disable the touchpad above. It happened sometimes this problem, on the second day to have it in my hands, I remember very well. But now after the update some Audio drivers with HP Support Assistant (Intel HD Media Accelerator, IDT High Definition, Intel Rapid Storage Technology drivers), it happens all the time, whenever I log on, 5 minutes after that (sometimes even less), it stops working. Thanks for the help.

  Main office:
  Intel Core 2 Duo E8400 | ASUS P5QC | 4 GB DDR2 800 Mhz. Kingston memory | NVIDIA GeForce GTX 560 | Coolermaster GX750W | ST31500341AS Seagate 7200.11 1.5 to | LG M228WA 22 "HD ready monitor/TV
  Laptop:
  HP Envy m6-1125dx

  Go to your device manager and uninstall the drivers for the touchpad. Once you have uninstalled the drivers, go to the toolbar in the Device Manager and select "Search the hardware changes" and let him update the driver. Reboot the laptop and let me know if the problem persists.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY 17 t-k000 CTO: HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  I've just killed my machine from Windows 8.1 stock that came with Windows 7 Pro x 64. I was able to install all the necessary drivers and software located on this page, except for one.

  <http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 7174...

  However, none of the Wireless LAN drivers worked. (I tried just in case)

  When installing Windows 8.1, I was able to tell that the WiFi card installed was a feature of Broadcom, but the driver on the support page for this machine does not work.

  I tried the last few days but I find no related article this topic.

  Does anyone know of another driver who can work with my camera?

  Hello:

  Here you go...

  network controller:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_133353_1 #tab1

  bcm43142a0 (bluetooth)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-132205-1 & cc = us & dlc = en & lc = fr...

• HP envy m6-1125dx: install new fresh windows 10

  Dear HP support,

  I'm a client that you currently use product, I have a question that must be resolved.  I have a windows OEM 8 laptop which is HP ENVY M6-1125DX I mentioned in my name of the product and since the new windows 10 just came out a few days ago. And I have a usb windows 10 which is created from microsoft software. My problem is that

  I don't know how to start the usb mode UEFI drive, I can only start my USB/CD in legacy mode, can I install another operating system. Can you help me how to boot and install a NEW COOL windows 10 USB in UEFI mode, I don't want to not go in LEGACY mode and I n ' want to use my recovery disk to do this, cause there are some OEM applications that I don't like and it can take up to my HARD drive space. Please help me!

  Thanks HP!

  Download W10 in ISO format using the tool that you have mentioned and then see article bleow to start using the UEFI.

  http://winaero.com/blog/how-to-create-a-bootable-UEFI-USB-drive-with-Windows-10-Setup/

• bad driver for M1212nf MFP in Ubuntu

  I use Ubuntu 14.04 and the HP prints OK in portrait mode, but the left 1/2 of the page is a stupid idea in landscape mode. (I did not notice if this is the part at the top or bottom of the page, as I turned immediately to see my picture).

  I used Image viewer and thought that maybe something may be wrong with the program. It does automatically rotates the image 90 degrees as the best in landscape mode.

  To check the problem I used Shotwell viewer. Then I could choose to rotate the image or not. When I did not rotate the image, it came out OK. When I asked rotate at 90 deg, I had the same 1/2 page trash I saw in the Viewer. So the problem seems to be a bad driver.

  I removed the printer and reinstalled, but no change has taken place. Any suggestions?

  Ilan

  Ubuntu users, I hope that my mistake will help others.

  The point is that the installation from the repository does not work.

  The right way to do things, it's go to the printer in Firefox. For me, it's to 192.168.1.103

  Then you can go to the HP website and leave HP to load the appropriate software. It works, and it's the only thing that works.

  I did a long time ago, but I've managed to forget...

  Thanks for the help. It is always good to know that there are people out there willing to help.

  Ilan

• BSOD after Logo Windows at startup: bad driver, AutoFailover

  I get BSOD after Windows Logo at startup. Said Startup Repair: bad driver, AutoFailover.

  Two weeks ago, that I was getting the same BSOD after logo, but only with the bad driver. I not did something to fix it (or Startup Repair), it's just dissapeard after a few days. Also, the last day that I was getting BSOD, the night when I started my pc, it remained 2 minutes at Intel Boot Agent initialization and also 30 seconds to the black screen that follows (before the windows logo). When this situation occurs I get more BSOD. I tried to restart my pc but I stayed another 2 minutes to the Intel Boot Agent initialization. This problem has been fixed in the next morning, when I started my PC, even once, I don't know how, I did nothing. I remember that it is sometimes used to stay 2 minutes Intel Boot Agent, even when I was on Windows Vista, and it also sets automatically.
  I upgraded my BIOS a few weeks before getting the BSOD, but I don't think that's the problem. In addition, there was no new driver installed before getting the BSOD, drivers have been installed after the first BSOD (even if the event viewer and the reliability monitor do not mention the first BSOD, only those who have followed the installation of the driver I know there's a BSOD before, I'm sure.)
  My system: HP Compaq 8510w (Original with windows vista bussines, did a clean install of 7 ultimate)
  BIOS version: F.20

  C: drive has only 10% free space - 15% free space is optimal for Windows

  Please visit the site Web of the manufacturer of the PC and download/install all drivers.  These are devices that lack the drivers:
  *******
  Controller of communication Simple PCI PCI VEN_8086 & DEV_2A04 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 18 that the drivers for this device are not installed.

  Serial port PCI PCI VEN_8086 & DEV_2A07 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 1 b, that the drivers for this device are not installed.
  No available ACPI\HPQ0006\2 & DABA3FF & 2, the drivers for this device are not installed.

  Base system device PCI VEN_1180 & DEV_0843 & SUBSYS_30C5103C & REV_10\4 & 118B1C9 & 0 & 34F0 the drivers for this device are not installed.

  Fingerprint Sensor USB\VID_08FF & PID_2580\5 & 1E4845E3 & 0 & 2, that the drivers for this device are not installed.

  RICOH PCMCIA\RICOH-BAY8CONTROLLER-F1B2\1 Bay8Controller the drivers for this device are not installed.
  ******
  Please uninstall ATI Tool - it does not work in Win7 and may be responsible for your BSOD (and its drivers are from 2006).  More info here: http://www.carrona.org/drivers/driver.php?id=ATITool.sys

  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BSOD BUGCHECK SUMMARY
  The debugging session: 05:54:32.426 Fri 31 August 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\083112-17019-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:08.455
  Bugcheck A, {7bcc, 2, 0, 82afb482}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! DeleteNodeFromTree + 46)
  Error checking code 0000000-a
  Arguments 00007bcc ', memory IRQL bitfie 82afb482 00000000' 00000002',' address
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  BUGCHECK_STR: 0XA
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xA_nt! DeleteNodeFromTree + 46
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:17:05.296 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-17004-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:11.356
  CD error checking, {8931d 000, 0, 82a271f2, 0}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  WARNING: Unable to verify timestamp for ATITool.sys
  ERROR: Module load completed but symbols can be loaded for ATITool.sys
  Probably caused by: ATITool.sys (ATITool + 2017)
  000000cD Bugcheck code
  Arguments 8931d 000', memory 00000000' 82a271f2 value ', if not 00000000', int Mm
  DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
  BUGCHECK_STR: 0XCD
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xCD_VRF_ATITool + 2017
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:00:26.646 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-21933-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:07.675
  Bugcheck 1000007E, {c0000005, 82c2e4a4, 80786888, 80786460}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! ObpLookupDirectoryEntry + 2 b)
  Bugcheck 1000007E code
  Arguments c0000005", ex-82c2e4a4 ', the 80786888 ad', except 80786460', Contex
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  Nom_processus: System
  BUGCHECK_STR: 0X7E
  FAILURE_BUCKET_ID: 0x7E_nt! ObpLookupDirectoryEntry + 2 b
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• HP Envy 17 N001tx: Envy 17 N 001TX HARD + SSD drive

  Envy 17 N 001TX HARD + SSD drive

  Product number: M9V44PA

  The laptop has already 2TD HDD.

  Can I add an SSD to this topic?

  Yes. On this model the M.2 slot is present on models with an i7 and a graphics chip dedicated according to the maintenance manual.

  Manual

  See page 2

  However, the manual is very vague as to the location and access to the m2 slot.

  Others have posted pictures and it seems that the manual does not and you don't need to remove and return on the motherboard for access. The location is right above the drive Bay hard see p. 35.

  So you can add a module to the WSSD m2 for your laptop, sometimes called a hard "gumstick" disc

  That's what it would look like:

  

  After back with other questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP envy m6-1125dx: HP ENVY M6-1125dx update map wifi Help!

  Hi, I am a customer who, using HP product, I have a laptop HP ENVY M6-1125DX model, I have a wifi card name "Ralink RT5390R 802.11bgn wifi adapter", and I wonder if my laptop is able to switch to wifi adapter 802.11ac? ". Please give me a specific name of this wifi card.

  Thank you!

  @NGHINGUYEN1201

  These are the cards WiFi for your laptop.

  (22) WLAN module:

  For use on all computer models:

  Atheros WiFi 802.11b/g/n, Bluetooth 4.0 adapter and 1 × 1 9485GN 3012 655795-001

  Atheros 802.11b/g/n adapter Bluetooth 675794-001 1 × 1 WB225

  Broadcom 4313GN 802.11b/g/n WiFi and Bluetooth 20702 4.0 Combo Adapter 657325-001 1 × 1

  Module Intel Centrino Advanced-N 6230 WLAN 670691-001

  MediaTek MT7630E 802.11bgn Wi - Fi and Mediatek Bluetooth 4.0 adapter adapter 710418-001

  RALink RT5390R wireless 802.11b/g/n 1 × 1 691415-001 adapter

  RALink RT3290LE 802.11b/g/n WiFi and Bluetooth 4.0 Combo Adapter 690020-001 1 × 1

  Atheros AR9565 802.11b/g/n 1 × 1 WiFi + Bluetooth Combo adapter to use 4.0

  only on computer models equipped with an Intel processor690019-001

  Module Intel Centrino Advanced - N 6235 WLAN to be used on computer models

  equipped with an Intel to the Japan

  670290 001

  Your manual here.

  http://support.HP.com/us-en/product/HP-envy-M6-notebook-PC-series/5296045/model/5312259/manuals/

  REO