HP ENVY m6-1310sa Notebook PC cannot connect at 5 GHz although it has 802.11n?

Similar Questions

• Cannot connect new wireless J4680 to Airport Extreme 802.11n

  1. I first tried hold as usual several times.  The installation wizard is not 'see' my wireless.  Tried to reset wireless from the camera, without result.

  2 follow the steps as shown in the video 'YouTube' of HP.  Was once able to proceed to the point to get at least a "Page of Network Configuration" report printed which indicates success in adjustment in "ad hoc" on its network "hpsetup" mode, but then can not pass the airport network in infrastructure mode, input on the webpage of embedded devices.  (But now I know at least IP address theJ4680.)

  3. usually not found "hpsetup" automatically listed as a network on the airport.  Can sometimes become there by configuring manually via the J4680.  But this method will not always work.

  4. based on a different view (a person using Windows, Fios), tried to temp - disable my security at airports (a WPA2 Personal), but who have no positive effect.

  5 J4680.  Airport Extreme 802.11.  Mac OS 10.5.6.  No firewall that might interfere.  My MacBook is the only device on my Airport network.

  What else should I try?  Thanks in advance for any other tips/techniques that y ' All can provide.

  It works! It works! It works!

  Basically, I had to wait for the weekend to go home, so when I did, decided to just approach it all completely 'clean ':

  1. uninstalled the J4680 driver-->

  2 do you have a factory reset on the Airport Express-->

  3. configured reset Airport Express-->

  4 reinstalled the J4680 driver, using one that I had downloaded earlier (instead of the Conference on Disarmament) to make sure that I got the version the most recent-->

  5 turned on/turned off everything (to reset): MacBook, modem, router, printer-->

  6. then simply followed the implementation of HP guests-->

  It works! It works! It works!

  Thanks for your help and to hang in there, Jim.  (... A little anticlimatic.)

  Mark

• Cannot connect online after obtaining virus that has been deleted

  I removed the HP Lap Top virus. Computer works but cannot connect to the internet. Other wireless devices work OK. I tried all help Vista (network cards, tcp, etc) nothing works. Any suggestions?

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > search for the latest drivers Vista network adapter, etc. > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• PC companion cannot connect to internet

  It's been three weeks now & I tried to re - install PC Companion & which did not help.

  (1) impossible to check updates as "the server is not accessible.  PC companion needs to connect to an online server.  The server is currently not accessible.  Please try again later. »

  (2) area sync not working either cannot connect - "synchronization failed.  An error has occurred and the synchronization has been cancelled.  Synchronize again to correct errors".   Or if not, maybe.

  Is there a solution?  Why are there not any help on troubleshooting?

  Thank you

  Looks like you have something blocking PC Companion to connect to internet. Most likely, it is a firewall that is configured to block our software. I suggest that you check your firewall settings to make sure that it is allowed it.

• An ftp error occurred - cannot connect to host

  Receiver 'ftp error - cannot connect to the host. Dreamweaver has encountered an internal data error"... what to do?

  Try another FTP as FileZilla - the free FTP solution client and see if it works. If this isn't the case, then you have not entered the correct configuration.

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• Cannot connect LGUX300 phone via blue tooth laptop notebook g70 - 257 cl of HG.

  Cannot connect LGUX300 phone via blue tooth laptop notebook g70 - 257 cl of HG.

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct it contact the phone manufacturer

• HP ENVY m6 - 1188ca Notebook PC: HP ENVY m6 - Hard Drive short DST check FAILED

  Hi there, I get the following start-up error message.

  HP ENVY m6 - 1188ca Notebook PC

  Short hard drive DST Check: FAILURE

  FAILURE ID: GU71BT-6AA892-XD7X1F-60RK03

  Restoration of the system, cooling system, auto repair, no recovery option seems to work. I get to the screen only and cannot get into Windows.

  Is this a problem of material strictly for some? What are my options and next steps? Laptop went from warranty.

  Thanks in advance for any answers.

  

  Last UPDATED October 19, 2016 - I now get this screen when the laptop is turned on.

  

  New laptops are much more fast and pleasant. If your budget by all means, treat yourself. You could fix your old for around $ 100 may - $50 - $60 for a hard drive and about $40 for a recovery media.

• HP ENVY 17-j005tx Notebook PC, AccelerometerSt.exe - open pop - start up of the system error

  Hello

  I use a HP ENVY 17-j005tx Notebook PC with the latest installed Windows 8.1.

  Whenever I start my computer, I get the following pop-up message:

  "AccelerometerSt.exe - system error - cannot start the program becaue mfc110u.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  I don't know how to fix this? There are a lot of questionable research sites that offer downloads for these "missing files" but I'm sure that's not the solution.

  Could someone possibly offer me some advice of bette?

  Thank you in advance.

  Hello

  The missing dll is part of HP 3D DriveGuard - you can download and reinstall this software from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards

  DP - K

• Satellite A505 - sees, but cannot connect to, Wireless Router Win7

  I have a laptop Toshiba A505-S6980 running the 64 bit version of Windows 7.

  It worked fine a few months previously, to connect wireless to my O2 2 wireless router (the notebook has a REALTEK RTL8191SE wireless card).

  I also have a desktop running XP computer that I use to connect to the same router. While on the desktop, I noticed several weeks ago that the router has been implemented with no WPA and WEP security, so I decided to change the router to WPA. The desktop PC was fine with this, but the laptop complained and wouldn't connect, failure of authentication and just stating "unable to connect to xxxxx". At the time I assumed it just couldn't handle the WPA authentication for some reason any and decided that I would probably turn to WEP to a later date to make it work again. At some point, I remove a ' O2 Connection Manager ", which had been installed when I bought a 3G dongle O2, where he has confused the issue, but it made no difference. In the meantime, I tried to connect the laptop using a wired connection and worked well.

  I now (a few weeks later) decided that I wanted to use the wireless laptop then redefine the router to WEP expect this to work, but it didn't. As with WPA, he did not get past authentication when I put the key to security in. So, I try to understand the problem...

  What happens;

  (1) the wireless laptop sees my router (and neighbors), but just cannot connect.

  (2) I can connect with a laptop computer on the same USB wireless adapter.

  (3) I can connect the laptop to the router using a wired connection, and there is no problem.

  (4) my desktop running XP computer can connect to the router as WEP or WPA Wireless if the router is ok.

  (5) this worked several weeks ago!

  What I've tried;

  (1) I have installed the latest REALTEK RTK8191SE driver.

  (2) I tried to disable the security on the router, no joy.

  (3) I deleted all the profiles of network on the laptop.

  (4) I have tried with Norton antivirus and firewall disabled (but have not uninstalled) but no help.

  (5) I tried to do a restore of the system to the closest possible point and no help.

  (5) I uninstalled the wireless network adapter and its driver in Device Manager... Windows 7 can see the of it after a reboot and re - installed (using the old default driver), but it does not work. Then, I re-installed the latest version from REALTEK to ensure that it is up-to-date.

  What's weird is that

  (1) it works ok using the wireless USB adapter

  (2) the integrated REALTEK wireless adapter works to a point such that it can SEE my router, connect simply do not

  (3) authentication failure almost instantly

  My suspicions are that an automatic update of Windows 7 or the O2 Connection Manager has somehow screwed it upward. I have uninstalled the O2 connection manager and tried to uninstall the automatic updates but there are many of them and I don't know how far back, I need to go. Also, because it authentication immediately, it seems that it is not giving him a chance to actually work.

  Does anyone have any ideas on how I can proceed or had a similar problem?

  This is a really silly situation. In any case, I recommend you to use the Toshiba WLAN drivers only.
  I put t know what Realtek module is inside but try please install driver WLAN http://aps2.toshiba-tro.de/wlan/?page=downloads

  All that you have done is logic and I think I will try the same thing.
  Have you tried to connect to WEP or WPA is disabled? I mean free WLAN without protection.
  Have you tried to connect your laptop to a friend's router?

  I really put t know what is the problem here but there are a few bad setting it.

• Satellite C660-1CZ cannot connect to my wireless router

  Hello comrades,.

  I have a problem to connect to my wireless router.
  We have 3 notebooks here at home, and all are able to connect.
  But my Toshiba laptop cannot connect. I don't know why...
  The latest drivers are installed for RTL8188CE.
  I'm sure it's the latest driver from 2011.

  My operating system is Windows7.
  I bought yesterday and tried everthing to connect with my easybox 802.
  I also changed some settings on the router.
  Can someone help me pls?

  On other laptops, the SSID of the router's Easybox-D77327, but my Toshiba shows just Easybox-D57327.
  Its not the same SSID but the router is good.
  In my view, the problem is that my laptop shows me a bad SSID of the router, but how to solve the problem...?

  You have the same problem when using the AC power mode and battery as well?
  Can you connect to the router if WLAN is not secure?

  An error message occurs when you try to connect to your router?

• HP Envy 14-1010nr: HP Envy 14-1010nr Notebook PC: replace and upgrade to USB 3.0 ports

  Hello
  
  I have a HP Envy 14 - 1010nr Notebook PC, which had two USB 2.0 ports on the left side and a USB 3.0 port on the right.
  
  USB 3.0 port was damaged such as connectors plugged it seem a little loose and can move laterally a little so that the connection to the device comes in and out - makes it uncertain to copy some stuff on a hard drive through it, for example.
  
  Is it possible for me to replace this port? Where could find a spare part for that if it can replace?
  
  Even though I am inside the computer, I might as well replace the USB 2.0 with USB 3.0 ports ports if the pats replacement for that exist...

  You're right, because there is no audio + USB 3.0, only the original + USB 2.0

• HP ENVY m6 - 1188ca Notebook PC: No. Bluetooth

  I have a

  HP ENVY m6 - 1188ca Notebook PC

  And my bluetooth has disappeared. There is no option for me to activate it in the settings and it is not in the Device Manager. It's strange because I used to have. I am able to connect to my wireless mouse.

  You are the very welcome.

  If this does not work, the only other suggestion I can offer is to try one liked directly from Mediatek (Ralink).

  Bluetooth Driver (RT3290/MT7630)

  25/06/2014

  V11.0.754.0

  Win7 Win8 Win8.1

• HP ENVY 17-j053ea Notebook PC: windows post 10 install; touchpad does not work!

  Hello

  I pray that someone can help me.

  Brought my HP ENVY 17-j053ea Notebook PC early 2014, work very well running windows 8.1.

  In the month of August / Sept upgraded to windows 10 and that s when the problems started.

  My touchpad has stopped working... I tried a multitude of things that sometimes worked, but after a few days the pad has stopped working again.

  The problem started in the month of August on vacation so I installed the following:

  Driver and utility Chipset

  Intel Management Engine Interface (MEI) driver - sp63410

  Rapid Start driver Intel - sp63411

  Smart Connect driver Intel - sp63413

  Synaptics TouchPad Driver - sp63417

  HP Notebook System BIOS update - sp69886

  HP Notebook System BIOS Update (Intel processors) - sp66941

  The event system HP utility - sp65792

  Intel Rapid Storage Technology driver - sp63554

  This solved the problem for a few weeks, but then the touchpad stopped and started periodically and eventually didn't work for about 2 months.

  While the Forum last night I fought, I found the resolution posted by DanG82 with the title:

  HOW TO TROUBLESHOOT UPGRADE POST-WINDOWS 10 ON HP LAPTOPS

  Follow all the instructions step by step and was hopeful this could work... but it didn't.

  Whereas really return to 8.1 windows because it's so frustrating using a mouse on the go.

  Please please can someone help me?

  You are the very welcome.

  The only other suggestion I can offer would be to uninstall the touchpad driver and software in the menu programs in Control Panel, restart and try this driver synaptics, even once, I posted.

  Or try the driver directly from synaptics.

  Always uninstall the previous synaptics driver before installing the new.

  http://www.Synaptics.com/en/drivers.php