What configuration to use for the paper to use Staples label paper photosmart 5510

Similar Questions

• What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  Thank you

  Agoutin

  Hi rajthkr,

  Acrobat.com offers free online storage for up to 5 GB of data (there are on the plans at this time to provide additional storage for a fee).

  Best,

  Sara

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• When the scaling in the layout, 1st page prints correctly, but the following pages were not properly/too large for the paper, parts of text missing scale

  When you try to print in Firefox and when the scale to the size of the page in the page layout, the first page prints correctly, but the following pages do not scale correctly and are too large for the paper, with the parts of the text are cut off at top and right. It is not fixed by checking or unchecking the scaling / shrink to fit page width "ignore" in the print window, or by changing the scale percent.

  I am running Firefox 15.0.1, on Mac OS 10.5.8.

  The same problem happens in preview print and if I save the copy in a .pdf file

  I tried all the fixes in the how to and others in various forums with no improvement.

  This happens everytime I try to print a document from scaling upwards or downwards in Firefox.

  I note the bug has been fixed and should in Firefox 21 right now, it will mean the use night http://nightly.mozilla.org/

• What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  Hi, Jason.

  the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.

  phone numbers:

  * In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX

  See also this forum account issues:

  forums.Xbox.com/.../12.aspx

  Have you tried using another browser?  Google Chrome, Firefox?

  Contact for chat

  http://support.Xbox.com/en-us/contact-us?XR=footnav

• Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  I recently bought a HP Pavilion p6620f desktop PC to replace my HP Media Center PC m1270n desktop computer, which has stopped working.  I have a HP OfficeJet K60xi all in one printer fax scanner copier that has been the cable connected to the old PC.  The end of the cable does not match any of the places to go on the new PC.  Can you please tell me how to connect the printer to the new PC?   Is there a cable that has a configuration of PIN for the printer and a USB for PC connector?

  Please see: installation of the product with the USB cable and using the driver from Windows Update or the driver located in the Windows 7 operating system and HP USB 2.0 cable to the printer.

• Is there a tool or function (in Illustrator or InDesign) that selects any form and 'punches' a 'hole' of this form down through several objects for the paper or the work plan?

  Is there a tool or function (in Illustrator or InDesign) that selects any form and 'punches' a 'hole' of this form down through several objects for the paper or the work plan?

  Your objects punch must be in a large group; It will cut through all that is below.

  Create the shape you want to cut and set it to black Uni. Select your group and your form and (in the transparency palette), click make mask.

  Uncheck the Clip, and then return to the palette.

• HP Officejet Pro 8500 a: HP Officejet Pro 8500 has come looking for the paper.

  Hello and thanks for any advice.  I have a HP OfficeJet Pro 8500 started a clicking then that he was trying to pick up the paper for printing a document and then received a paper error output (bin was full).  I removed all the paper and found a small plastic piece 1/4 inches long and looks like a piece of home (he's not... looks like only). I replaced the paper and tried to print.  I opserved that the mechanism of paper collection has diminished, but the wheels do not turn. I manually pushed a piece of paper in front of the van and it printed.  The collection of paper wheel is the problem... is there an available spare part?

  Hi dwaryk,

  Thanks for joining the forums of HP's Support with your request.

  I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer that seems to have lost perhaps a part and the mechanism of paper collection has stopped working. I'll help you as best I can.

  I checked the list of replaceable parts for this printer and who find that the mechanism of collecting paper is not a replaceable piece by customer. If the printer is broken, a replacement may be your only option.

  I suggest you contact HP support. They could have an option to replace/upgrade the printer that you could save a few dollars to the retail costs.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

• Configuration of FlexSync for the Agile plm for process 6.1.1.1.11

  Here are the two queries that we have:

  1. create a new report on the environment:

  We followed the procedure to create a new flexsync report below:

  1. Open the configuration of FlexSync on the application server.
  2. Copy an existing out of integrated report "SingleFormulaPER".
  3. Change the new copied the report in step 2 and provided a name and traveled to the model file that had to be added.
  4. Committed change.

  To approve the changes, we observed that the database entry is made in the table FlexReportFields and FlexReports for the new report that we created.

  After doing this, we've made an entry for the plan of the site - Extensions.xml for the menu item. We are not able to see the name of the new report created in the user interface on the specification of Formulation. It says "no translation is lblbatchsheet. How to build a PKID for the entry in the CommonXLAExtensionCacheItem table and add the question of translation for this new report?

  What are the steps to follow to get this entry available for the user to be able to generate reports?

  2. adding a field to the report:

  We have modified an existing template to add a new column of the effective Date of the Summary tab. We used the name as "Summary.Effective" in the name Manager in excel for this new attribute template.

  After the update the model, we will open the FlexsyncConfig to edit the report, look for the updated model and then commit the changes.

  After that make us this change to the model, when we run the report specification formulation, we are able to see this column added to the report but the value is not getting from the report.

  We found that there is no entry in the FlexReportFields for this new attribute changes. When that we export this report to the FlexSyncConfig SQL code to run the script on database, as we are unable to find this entry in the script.

  These are the fields that must be added to the exiating report:

  Attribute	Spec	Tab	Section
  Density (2 values, 2 unit of MEASURE)	(Exit formula) material referenced	Summary

  Design features

  Starting on (date)

  Formula

  Summary

  Summary

  (Known to contain) allergens

  (Exit formula) material referenced

  Compliance

  Allergens / known to contain

  What are the steps that must be followed to modify an existing template to add/remove fields?

  Using FlexSyncConfig report, in the table fields Editor, if you the si vous la souris mouse click the column of fields on a single line.

  channels section manager updated to display the Manager string associated with this field.  You can then use the

  Manager string the drop down menu to choose what string to associate with the field.

• How to configure my PC for the first and after

  Hello:

  I have some problems with the Adobe software (especially with the first, after and Photoshop), when working with HD images (1920 x 1080 p, any format and with images of high resolution PH); the software will really slow sometimes when I use effects, such as the effects of correction of color or movement backward, or several cameras on first; the programs sometimes hang, or the empty screen to lose what I was doing...

  Here is the configuration of my PC:

  -Motherboard: Asus P9X79 PRO

  -Processor: Intel Core i7 - 4820 K 3.7 Ghz

  -Graphics card: GigaByte GeForce GTX 770 OC 4 GB GDDR5

  -RAM: G.Skill Trident X DDR3 2400 32GB PC3 - 19200 CL10 (32GB) 4x8Go

  -OS: Windows 7 Ultimate

  -Main hard disk: SSD SanDisk 256 GB SATA3

  I think with this PC, things must be faster, I tried to configure the RAM settings to give the software the max that I can, I've updated everything and I know that if I had an another SSD just for images, it would be better, but I've worked in other PC with a similar setup and they where faster... What should I do? How to check that everything is well configured?

  Thank you very much!

  PC hardware is not bad... as it goes.

  What you really need, is the other drives... usually a disk configuration 4-5 place the OS/programs on the C drive and many others, the following "bits": project files; cache/database files; preview files; media files.

  This would be a system 5 units, each option on a separate disk. And there are combos for running with 2, 3 or 4 drives total.

  The other option was an array of RAID - 0 4-6 disc scratched with your system drive.

  However ... Bill Gehrke, The expert on these things, reports rather incredible success using m.2 readers than a Samsung external T1, the latter able to run through a port USB3 (not nearly as high speed with external drives need more) and very usable read/write time with everything the program file being on the Samsung Q1 cross.

  Here is a link to Newegg to the referenced reader...

  http://www.Newegg.com/product/product.aspx?item=9SIA3FA2MW5954&utm_medium=BehEmail&cm_mmc= EMCPB-012016-_-PB-_-Bluecore-_-Content&utm_campaign=Post_Browsed&obem=kG0pQ4ZnarpJlim7Preg r_zepa4_BlGBGIm7flZoG3k % 3D & utm_source = Bluecore

  Now, at $184 / USD, it's a bit spendy gig for the "disk space", BUT... it is big enough for most small to moderate users to have a few projects on at any given time. You just need to move things on and outside it as needed. But you compare the total cost of connection that versus purchase say disks 5 3/4-to & so that they know, it's significantly less expensive. And you can use external references USB3 large and cheaper for backend storage of work not in progress.

  So... maybe that would 'fix' your questions...

  Neil

• Compaq DV7800: A Bios Configuration is required for the PCIE graphics card

  HII

  I have a small form factor dc 7800 Desktop

  And I also have a Nvidia 8600GT graphics card

  When I mount the graphics card on the computer PCIe slot

  would you like to work in VGA connector and when I use tha Port DVI form map

  Nothing... So I need a Bios Config to work?

  For the factor, I put the motherboard can configure the card

  I have all the equipment, power supply, HARD drive...

  Can you help me?

  Thank you

  This card is perhaps too powerful to 240W power supply that has your PC.

  I would go with a less powerful card like the Radeon HD 6450.

  Also before installing the video card, uninstall you the card integrated Intel graphics and check the driver to uninstall before installing the nvidia card?

  NVIDIA used to list the current of each of their cards, but now when I click on the sheet for the 8600 GT, I get very little info.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-8600-GT/specifications

  The PCI x 16 slot in your PC has a certain power of only 25W max draw and I'm sure that the 8600 GT draws more power than that.

• What size and resolution for the web

  Don't know what size and resolution I should I save my photos to FB.  Any suggestions?  AND I can do LR or what I have to go to the PS

  Thank you

  Alisa

  The resolution setting has no effect on the image. No matter what the resolution is fixed to, the pixel dimensions will remain the same. When I post photos on Facebook, I usually export copies with size defined for the long edge of 1000 pixels. Maybe it's a little too big. But you can set the resolution to 72, 96, 300, 600, etc., and it will affect the size or quality of the image.

  And, Yes, you can use Lightroom to export copies to publish on Facebook. In fact, if you set up your publication options, you can post to Facebook directly from Lightroom and not even had to worry about the size.

• Configure SNMP source for the events of HW for IPMI sensors

  Us run Dell hardware and tested OMSA installed on ESXi5 hosts pointing to OpenManage (OME) Essentials for any interruptions SNMP. As indicated in the following Dell FAQ for OME the 9.5 troubleshooting section, to avoid massive amounts of alerts unknown on the server of the OME from our hosts ESXi5 we define the SNMP CIM for IPMI event source.

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3265.OpenManage-Essentials-FAQ.aspx

  This article as well as VMware material and KB, any reference to the need to use the vSphere CLI to make this change, which of course works such as documented. Does anyone know if it is possible to make this change via PowerCLI? We do not want to use the vSphere CLI unless it's the only possible way as all the other configuration items that we have implemented kickstart or PowerCLI scripting.

  http://KB.VMware.com/kb/1008065

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.vSphere.monitoring.doc_50/GUID-01D333E8-0A34-4F04-BB6C-D80A5FDA8CC5.html

  I was able to find the key value pair in PowerCLI where EnvEventSource/directions options, but I don't know if those who may be changed.

  If someone knows a way to do this, I would like to know how it is possible.

  Thank you.

  I think I knew that.  It seems that you have to connect directly to the ESXi host nothing to do with SNMP still, but if someone knows a way to avoid this, I'd love to hear it.  But this seems to work at the same time, but would need to change to more than one host at a time.

  ## Script function: Modify SNMP source for hardware events
  ## Usage: Connect to vCenter where host(s) reside, populate constants below and run
  
  ## Host to make changes to
  $strVMHost = "your_ESXi_5_host"
  
  ## Credentials for ESXi host(s)
  $strUser = "root"
  $strPassword = "your_password"
  
  ## Key to change value on (in case there are different key/value pairs you need to change in the future)
  $keySnmpEventSource = "EnvEventSource"
  
  ## New value for above key
  $valueSnmpEventSource = "sensors"
  
  ## Connect directly to VMHost in order to see the HostSnmpSystem object (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.html)
  Connect-VIServer -Server $strVMHost -User $strUser -Password $strPassword
  
  ## Get the VMHost .NET View object and select only the HostSnmpSystem object
  $viewHost = Get-VMHost -Server $strVMHost -Name $strVMHost | Get-View -Property ConfigManager.SnmpSystem
  
  ## Get the HostSnmpSystem object
  $viewHostSnmpSystem = Get-View -Id $viewHost.ConfigManager.SnmpSystem
  
  ## Create new empty HostSnmpConfigSpec (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.SnmpConfigSpec.html)
  $specHostSnmpConfigSpec = New-Object VMware.Vim.HostSnmpConfigSpec
  
  ## Populate newly created HostSnmpConfigSpec object with current values
  $specHostSnmpConfigSpec = $viewHostSnmpSystem.Configuration
  
  ## Modify desired value for the matching key
  ($specHostSnmpConfigSpec.Option | ?{$_.Key -eq $keySnmpEventSource}).Value = $valueSnmpEventSource
  
  ## Reconfigure the SNMP agent to take the new value
  $viewHostSnmpSystem.ReconfigureSnmpAgent($specHostSnmpConfigSpec)
  
  ## Disconnect from VMHost
  Disconnect-VIServer -Server $strVMHost -Confirm:$false
  

  Let me know if it works for your environment that we not use SNMP in ours, so I didn't do extensive testing.

• What is best practices for the mirroring of a vector design (symmetrical)?

  say OK, I'm a user icon detailed (head and shoulders people) for some icons, etc. which need to scale graphics General icons for web and print.

  I can create the silhouette easily by tracing around my sketch in pencil or making it up on the spot. now, I wonder as I used maya (3d) in the past and I could work on one side, while the otherside (x) is created as a pseudo copy until I get an independent form. Is it possible to do this kind of thing in illustrator CS4? What you guys need to do something like that is completely symmetrical? (I'm still stuck on this when in a hurry)... could you explain step by step?

  Thanks for the tips!

  You can do this with a transformative effect, updated to reflect, 1 copy.

  

  In the appearance Panel, select the path and save a style that can be applied to the new paths that you draw.

• Tecra M5 (PTM51E) - What tools I need for the FN keys?

  I am trying to install a new version of Windows XP on my laptop.

  Can anyone confirm which software from the support site, I need to install to get the Fn + F keys to work?
  I installed everything on the site but I can't get the buttons working.

  Screen brightness works but buttons to switch between WLan, WLan + Bluetooth etc do not work.

  Thank you for any assistance.

  Hello

  You can answer this question yourself as on the Toshiba site, you can find the installation instructions document. Use this list as an installation order recommended to work properly for laptop.

  In any case, for the FN keys, you need:
  -Common modules
  -Controls
  -Utility Hotkey for display devices
  -Utilities

  Good bye