HP first colors to draw graphs?

Similar Questions

• Change the color of the graph by programming

  HIII everybody,

  I have to draw 12 plots in a waveform graph. I chose the colors in the legend of land for each parcel. But I don't want to display graph 12 at a time. I have as many checkboxes for selection as graphical user settings of the parameter to which want to see. I did what his works well.

  But there is a problem in the color of the graph, if I select 12 parameters at a time, then it displays with the same color I selected on the legend of the plot. But if I choose to less than 12 parameters labview assign colors in series without distinction of color affected. I have attached the VI please help me with this.

  Thank you best regards &,.

  Manisha

  Your problem isn't that you have changed the colors on the chart, it's that you have change the label.  Actually, you have restructured your table in its entirety.

  Why don't you use the Visible field? property to determine what is visible.  Now you're talking almost no code.

• XPS 15 (9550) first color "Application only supports genuine Dell devices.

  Hello

  Trying to get rid of the issue hogging the first memory color by installing the latest driver. Driver Intel update ok, but the error 'Application only supports of genuine Dell devices' when I try and install the first color (software - Images_Application_RJ00H_WN32_2.0.199_A00.exe) update

  

  Install failure report

  

  The problem, however, is that some of us can not install the.update because it makes Dell hardware no authentic account.

• Fade colors in the graph of the intensity

  Hello world

  I did a program where I read a 2D array and draw this picture in a graph of intensity.

  I was wondering if the colors in the chart weaken each other, preferably in a vertical position (columns). The idea is that digital data becomes viewed as a genetic profile.

  I added a picture of the graphics path.

  Thank you.

  Without manipulating the table, no it's not possible.  I had an idea about the exchange of idea to solve this problem, I recommend that vote you for it.  Anti-aliasing or smooth intensity plot

  As says the idea, see this post for workarounds.

• Set the name of a Visible plot and color lines draw graphic legend of XY

  Hi all

  Updated 20 plots data on that and I'm initializing the XY graph with 20 plots.

  After update of data, I do draw 3 to invisible, now I need to trace the legend to organize such that he should have, plot 0, plot1, plot2, plot4, plot 5... plot19, in the legend of his plot and should not have Plot3.

  So while graphic print and consult the chart in pdf format, I can see field only for Visible names draw in the legend of the plot and can avoid the confusion of having plot3 in my graphic impression. (Given that this parcel is invisible and data used pot in chart 3 and so I do not have this as my as well catalogue)

  Is there are ways of achieving them, please send your suggestions.

  Thank you

  Stéphane

  You can set the colors of the plot, point style, etc. by program like I did with the name of the parcel. The colors are just an extension of the notion that I have used with the array of names.

• with color predetermined waveform graph

  Hello

  I have a table of waveforms. Now, I want to view a graph of a waveform in a way that only two or three colors to be specified of waveforms. for example if my table consist of 150 wave forms, 50 first waveforms must be displayed with the color red and the rest be displayed with black color. of course, I don't want to do it manually. is it possible to labview?

  Concerning

  You will need to use the properties "Plot Active" and "Color chart" handle this programmatically.

  If you must first get the number of plots - another property - then decide how you want to divide them into different colors and assign each active plot the specified color.

  Hope this helps,

  Christian

• How to change the color of the graph automatically

  Hello

  I want to trace several graphs with different colors.

  I wrote a program that performs the calculations in matlab even can trace in it, but I would like parcels to labview, it turns the color of all parcels is white.

  Can someone take a look at my program and say where is the error.

  the program is calculating.... _maxmin

  Thank you

  Here you go 8.5

• Table of standard color for the graph of the intensity

  Hi all

  I am trying to change the color table of a graph of intensity of some tables in color standard, such as 'rainbow', 'gray', 'seismic', 'waves of lava","hot metal","purple haze", etc.. I can't find not "Rainbow" and "grey" somewhere for the examples, but not others. I tried to generate these color tables myself using the example «...examples\general\graphs\intgraph.llb\Create Table.vi IntGraph color, but the result was far from good.

  Can someone teach me how to generate these color tables? Thank you in advance.

  

  Kind regards

  Mario

  Hi GerdW,

  I'm not sure of the exact way to do it, but I did a simple vi based on your idea. The vi to retrieve the color table I want in the table format, subject me to load the bitmap file that contains only the color scale. Some raster color table constants are included in the VI for those in need. Please see the attachments and give me your comment.

  Kind regards

  Mario

• When I export a clip with a United, the first color change (more desaturated)

  Hello world

  When I export a clop with a solid color, in this case a green with the RGB code #006938. I export it and first Exchange the solid color, one more desaturated, that this is a problem because that is the corporate color of the customer.

  Any help?

  Mi computer:

  MacPro 2013

  AMD over-pants D700 6144 MB

  Screen: DellU2713H

  Thank you very much.

  That you view in QuickTime Player or something else? Try to view the video in VLC or even importation in first. If the color seems normal in VLC or first while you see the age-old bug "QuickTime gamma shift", which is not really a change in gamma (or at least that is my understanding), but it's what most people call it.

  Check out this thread if this is what actually happens: H.264 gamma shift/faded colors on export

• (Multi ^ n) draw graphs of waveform

  I'm using LabView 8.2 and I need a graph of waveforms non-sinusoidales twenty bunk on this one (actually two waveforms taken ten times each, so - what counts, but no, I can't just average to them).  With the help of table build to make a standard multiplot with Express waveform graph does not, however, apparently because the VI express can handle only two waveforms at the same time.

  Suggestions?

  Hi DJDDA,

  right click on "table of generation" before the chart and select "concatenate entries.

• How to change the background color of the graph?

  The default chart is black, I want to change it to white, how do?

  NSTL,

  On the tools palette, you have the Brush tool right at the bottom of the palette. You can change the background of the chart by clicking on the background with this tool. It will change to the selected color.

  RGS,

  Lucither

• How to draw graph wrt times

  I m new to labveiw and this forum... anyone can tell how to draw simple

  graphic analog I / p with respect to time...?

  Why don't you do something like that? After the back if you have any questions.

• How can I save my history of color (Adobe drawing app)

  Hello

  I'm not sure if this is an obvious question, but I am struggling to find a way to save colors of my 'color story' in 'my library', mainly so that I can use the same palette again for new designs. Anyone got tips?

  Thanks in advance!

  Louise

  Hi Louise,.

  If you open the menu color you'll see three tabs at the top of the menu (selector of themes my library). Choose selector. In the next menu that opens, you will see another menu drop-down (by default to the wheel); Press that and choose history. You will see all the colors that you used in this project.

  The stories of color and brush settings are per project. So they are available for each canvas in a project, but as soon as you open a new app by default project, the original brush/color settings.

  Let me know if this isn't clear. Or if it does not fully answer your question.

  Sue.

• How to show the value Color Picker (drawing area)

  Hi all

  How to make a Color Picker selection guide the user can see the selected color? In my example - the color selected by Color Picker must paint the place. All variants? Preferably with Dom.

  var wColor= new Window('dialog', ' ');
      wColor.orientation = "column";
      wColor.alignment="top";
      wColor.spacing=0;
          wgr1=wColor.add('group');
          wgr1.orientation = 'row';
          wgr1.alignment='top';
              btnRGB1= wgr1.add('button',undefined,'RGB');
              btnRGB1.preferredSize = [50,20];
              p1 =  wgr1.add("panel", undefined, "", {borderStyle:"silver"});
              p1.preferredSize = [22,22];
          wgr2=wColor.add('group');
          wgr2.orientation = 'row';
          wgr2.alignment='top';
              btnRGB2= wgr2.add('button',undefined,'RGB');
              btnRGB2.preferredSize = [50,20];
              p2 =  wgr2.add("panel", undefined, "", {borderStyle:"silver"});
              p2.preferredSize = [22,22];
  
      btnRGB1.onClick = function(){//-------------------------------------------------------
          app.showColorPicker();
      }
      btnRGB2.onClick = function(){//-------------------------------------------------------
          app.showColorPicker();
      }
  
  
  wColor.show()
  
  

  Try this:

  #target photoshop

  color1 = new SolidColor() var

  var Color2 = new SolidColor()

  var wColor = new window ("dialog", "");

  wColor.orientation = "column";

  wColor.alignment = "top";

  wColor.spacing = 0;

  wgr1 = wColor.Add ('group');

  wgr1.orientation = "row";

  wgr1. Alignment = 'top';

  btnRGB1 = wgr1.add ('button', undefined, 'RGB');

  btnRGB1.preferredSize = [50,20];

  P1 = wgr1.add ("panel", undefined, "", {borderStyle: "money"});

  P1. PreferredSize = [22,22];

  wgr2 = wColor.Add ('group');

  wgr2.orientation = "row";

  wgr2. Alignment = 'top';

  btnRGB2 = wgr2.add ('button', undefined, 'RGB');

  btnRGB2.preferredSize = [50,20];

  P2 = wgr2.add ("panel", undefined, "", {borderStyle: "money"});

  P2. PreferredSize = [22,22];

  btnRGB1.onClick = function() {/ /-}

  app.showColorPicker ();

  Color1. RGB. Red = app.foregroundColor.rgb.red

  Color1. RGB. Green = app.foregroundColor.rgb.green

  Color1. RGB. Blue = app.foregroundColor.rgb.blue

  g = p1.graphics;

  myBrush var = g.newBrush (g.BrushType.SOLID_COLOR, [color1.rgb.red/255,color1.rgb.green/255,color1.rgb.blue/255, 1]);

  g.backgroundColor = myBrush;

  try {App.foregroundColor = color1}

  {catch (e)}

  try {App.BackgroundColor = 2}

  {catch (e)}

  }

  btnRGB2.onClick = function() {/ /-}

  app.showColorPicker ();

  color2. RGB. Red = app.foregroundColor.rgb.red

  color2. RGB. Green = app.foregroundColor.rgb.green

  color2. RGB. Blue = app.foregroundColor.rgb.blue

  g = p2.graphics;

  myBrush var = g.newBrush (g.BrushType.SOLID_COLOR, [color2.rgb.red/255,color2.rgb.green/255,color2.rgb.blue/255, 1]);

  g.backgroundColor = myBrush;

  try {App.foregroundColor = color1}

  {catch (e)}

  try {App.BackgroundColor = 2}

  {catch (e)}

  }

  wColor.show)

• First color NLE of the message in this box befor I started was to light for read me. should I live or not. I can't read the message below using this box.

  could not read one thing in this area except what I type.

  Sounds like you probably need someone to help you.  If you can't read what is written in that box, I don't know how we can help you.  You can try to contact Microsoft directly for the customer support.  http://support.Microsoft.com