HP G60-243CL
I have to open my old HP 243 CL and I tell myself that while I'm here, I will replace the processor RM72 (with the S1g2 socket). Will be the recent/most fastest cpu ZM-87 in this system work? I have upgraded the bios and can't see anything obvious, preventing him from working, unless my motherboard will not accept anything other than the RM series. Anyone ever done this swap?
2nd question - AMD has never come out with the ZM-88? It is listed in the wiki, but I can't find any place that sells it-
Thank you for your help-
BTW, this laptop has been upgraded to memory 4 GB, Windows 7 x 64 and a Vertex 2 SSD.
The ZM-80 and ZM - 82 are supported
See Page 1-1
The ZM-87 'could' work, but you generally only safe installation processors HP offered on your motherboard.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Tags: Notebooks
Similar Questions
-
What are the motherboard data transfer rate on a HP G60 - 243CL?
I bought my laptop HP G60 - 243CL of Costco 3 years ago and continues to function perfectly. Since then I have maxed out the 320 Gig HARD drive. A few days ago, I transferred all my multimedia files of a terabyte of 1.5 external HDD. I also removed and uninstalled all the software that didn't come with the laptop pre-installed. I ran the Disk Cleaner to delete the temporary files... etc. I left pretty much the State of Out-Of-The-Box laptop... I also ran the Windows disk defragmentation application. Although it has all updates from Windows Update. I doubt that the above mentioned is relevant to my question. The laptop came with two modules of RAM PC2-5300... a 1 Gig and 2 Gig. I replaced both with two sticks of modules/memory 2 GB PC2 - 6400. Other that this hardware upgrade, I've also upgraded to Windows 7 Ultimate edition 64-bit. Now, I am also considering upgrading to an SSD HARD drive. I have of course read/write speeds rise as SSD memory ability increases (depending on model)... for ex: there is a huge difference in the rate of data transfer speeds in a 32 Gig SSD compared to a 256 GB SSD. At least that's what I noticed. I want to install a Gig of CRUCIAL 512 or possibly a CRUCIAL 256 GB SSD. Read/write speeds are respectively of 500 MB/s and 260 MB/s, or 230 MB/sec and 190 MB/s (again, depending on the model). My question is noticed in the SUBJECT field. Can you please help me make a wise decision? I wish that more technical details as possible. Thanks... :-)
This laptop is equipped with SATA I, which is 150Gbit/s. You will not reach the maximum speed of your SSD, but it will be much faster then your current old school disc spinner. An SSD will always exceed a normal HARD drive. In addition, you should see a bump in battery life as well.
I hope this helps!
Sean -
A firewire port connectable to a HP G60 - 243CL?
HP G60 - 243 CL, Vista 32-bit, is possible to connect a Firewire camcorder to this computer?
Hello
Based on this, your machine lacks any firewire port. It has no Expresscard slot therefore the single adapter, you can use is USB to Firewire like this:
http://www.YouTube.com/watch?v=3Gy445vHV9c
Kind regards.
-
Remove line home pg up, pg dn buttons does not
Laptop HP G60 - 243CL
PrtSc remove line home pg up, pg dn buttons does not. they simply stop for some odd reason. How to fix?
Thank you
laptop is under warranty
BillHi Bill,
In this case, it would look like it is a hardware problem.
As your laptop is still under warranty, my best advice would be to contact HP and make arrangements for this fixed - you can check the status of your warranty here.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Kind regards
DP - K
-
HP g60: System disable the code
Portable Hi guard boot up with power on password after a few attempts it systems disable code 95490205 my modelife number is G60-230US
Enter 20598821
Kind regards
DP - K
-
Hello I have a laptop G60-530US older and who plan to make the updates with the CPU. I have a few sitting around and want to use something other than the T4300.
I called HP several times and got the "Please hold while I direct your call", then take a cut.
All I want is the compatibility list CPU so I can see what I have and see if I can install it. I know it's an Intel Socket P, so it can be replaced. I've updated the BIOS F.65.
The system runs Windows 7 Ultimate 64 bit with 8 GB of RAM plans
I have about 12-20 Socket P processors laying around, ranging from T6 *, * T7, T8 *, to T9 *. So all I need to know is what is the maximum supported CPU?
If I am changing it might as well bring the best in is what I say!
Or just the support list so I can install the right one in my collection.
Help, please... No one has any info
Hello again indianmetallord,
I am pleased to have been able to solve your problem. Could you please mark my post where I brought the solution here as an acceptable Solution to anyone in the future who has the same issue can easily find the same resolution.
Again, I am happy that I was able to help.
Thank you
Dunidar
-
Good day! I hope that ALL have a nice time.
HP Pavilion G60-458DX
Compaq Presario CQ50z-100
Compaq CQ50-139WM
I have a G60-458DX with a bad screen. I think it's the backlight because it grayed out in front of me, but I can still see what is happening in the shadows.
I have a CG50-139WM shipwreck which has a good screen I would use the G60.
I also have a CQ50z-100 with a good screen that I as a substitute.
Are these compatible screens / interchangeable?
Your help with this project will be greatly appreciated and save me a lot of time.
Kindness rocks!
John V. Brennan
Owego, NY
Hello
The following link shows all the parts for your G60-458DX:
http://PartSurfer.HP.com/search.aspx?SearchText=VH171UA
For the screen, none of them can be used with other two CQ50 machines
488385 001
http://PartSurfer.HP.com/search.aspx?SearchText=488385-001
496764 001
http://PartSurfer.HP.com/search.aspx?SearchText=496764-001
496770 001
http://PartSurfer.HP.com/search.aspx?SearchText=496770-001This is why 2 machines CQ50 screens do not work on the CQ60.
Kind regards.
-
Computer laptop HP G60-230US, - power connector inside the computer laptop seems to be losing
HP G60-230US laptop
I started to notice that my laptop power connection has been a little lost; a little later, I needed to play a bit with the connection so that the power would not disconnect; now, it seems that something got completely lost inside the connector and I get no power in my laptop. How can I get this connector and replace or tighten? I already tried to open the lid, but did not see an easy way to access it. Thank you very much for your suggestions.
Levega.
Your power supply is not on the system board.
Here's an Ebay link for your jack.
Here is the link for your manual. "Page 4-46.
http://h10032.www1.HP.com/CTG/manual/c02985882.PDF
I hope this helps.
REO
-
G60-230US == >; does not connect to the wireless network
Greetings...
I got my new laptop a G60-230US with Windows Vista Home Premium SP1 yesterday... I was so excited. I quickly put in place and the network manager. He finds my home network (a router we Robotics MaxG 5641), had the exceptional signal strength, I have provided the password. It didn't connect to the network. I have 3 other devices without any problem. Then I disabled the firewall, antivirus etc. on the computer, I've disabled the security on the router and tried... Still no luck. I called the help desk yesterday evening, and a clueless CSR tried to 'Help me' After I turn the router, computer, WIFI (everything that I had already tried), she suggested that I should contact my ISP and get a new password. I explained to him that the password has been created by me for my own US Robotics router and ISP had nothing to with her... She just kept saying the same thing... and I politely thanked her and hung up at midnight...
This morning, I tried something else. I tried ipconfig / all and I don't have any useful info, except that it says "Device off" I tried ipconfig/release and he told me that the action must be raised. I am the administrator on this computer.
U.S. Robotics indicates that this default router should work for Vista, because a router is independent of the operating system
Any idea is extremely appreciated...
Thank you!
Shankar
I went to the office today max and I bought a new router D-Link Wireless N for $40. Came home and set up... and this baby is immediately connected to 130 Mbps! I'm all set... Great computer... I'm glad it works...
I invite all who have problems with wireless to swap the router and check again...
-
Screen HP G60 Notebook PC-Blue error at startup
I bought my HP G60 laptop in feb, 2010.It worked well for a few months and then a blue screen with the error message Memory_Managment and Intialization_process propmted on-screen and disappeared after a few minutes.
but a few days back, my system was unable to resume its original position of this error screen.
I restored using the backup of what I have in my external HARD drive.
Cannot restore to the D partition recovery factory settings.
could someone share the solution to this problem.
Your responses to most early are much appreciated.
Here is a link that gives the procedure to perform a recovery drive D:
http://support.HP.com/us-en/document/c01895783
If you have problems following the process, please see the following link:
http://support.HP.com/us-en/document/c01612373
If the problem persists, please specify the exact error message or screen where you are stuck.
-
HP G60 laptop boots HP logo, and then recycles - Windows 7
I just installed a new keyboard on my laptop G60 running Windows 7 Enterprise Edition. before putting the screws in the battery compartment area, I replaced the battery and turned on my laptop unpluggced to see if the new keyboard work. Everything worked perfectly.
So I closed the lid of my laptop, removed the battery, put the screws, replace the battery and press the power button, now my laptop boots as much as the HP logo, with the option to press ESC to the Start Menu, then the screen goes black and travels to the HP logo. This cycles goes and indefinitely. I am able to access the Start Menu. I removed the new keyboard and tried to start it again - same thing. I then tried using my old keyboard to see if that makes a difference - no change.
Any advice? Thank you.
Hi - I tried that after I posted this question, and it turned out to be a previously installed update that was causing the problem. I had to restore my system to a previous date before the update was installed, and this has solved the problem. Thank you!
-
G60-530US: MEMORY UPGRADE
Model G60-530US S #2CE94709W4
Can someone tell me what is the maximum memory for this device and what is the format.
I also have a Mini 311 m #1037 and have the same question about it
Hi @redbarron1,
Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need information on the maximum memory supported by 2 of your units. It will be a privilege to help you.
We greatly appreciate your relationship with HP. You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you. Kudos to you to ask for information on upgrades of memory. It is always a privilege to work with savvy customers like you.
I checked the link for the HP G60 530. Maximum supported memory is 4 GB. Please visit this link for more information: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01860415
For the Mini, it's 3GB. Please visit this link for more information: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01896922
I really hope that things work out very well for you and your computers and they stay healthy for a long time. I hope this helps. Please let me know how it works.
Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".
Take care now and have a great week ahead
.
-
Can I make my HP G60 running Windows 7 64 bit?
Currently, my system has 3 GB of RAM that I know can not support 64 bit and I need at least 4 GB but is there something I can replace (as perhaps the card mother?) to make it work? I have some knowledge about the things of this question, but I hear people say that such things are not possible, but then there are people who say it's possible. I really appreciate any help, thank you!
You have it backwards. You don't need 4 GB of RAM to run 64-bit Windows; you need 64-bit Windows support more than 3 GB of RAM. We would need to know the exact model, but as far I know most if not all G60s will run 64-bit Windows. All that is needed is a 64-bit processor. If the computer has a 64-bit processor, it obviously has a card mother and chipset supporting a 64-bit processor. All AMD Turion x 2 processors are 64-bit, for example. Even some Semprons and Celeron 64-bit processors. You can install Windows 64 bit on 2 GB of RAM, as long as the processor supports. There is no reason to do so, but it can be done.
-
HP G60-530US laptop: replacement replacement motherboard for G60?
the motherboard is dead on my G60, and I can't find another motherboard with the same part number to buy.
the reference is 55.4FQ01.021G, I google the world and could not find one for sale.
is there a suitable replacement for this? I can just any motherboard that fits a G60-530US?
I see a lot of 48.4FQ01 - 011 on ebay, I hope that I can use that one.
s/n [personal information]
p/n VM084UA #ABA
Thank you!
Hello
Original part number:
578232-001 motherboard (motherboard) - architecture of the AMU, GL40 chipset, modem 56 Kbps and HDM
http://PartSurfer.HP.com/search.aspx?SearchText=VM084UA
https://www.Amazon.com/s/ref=nb_sb_noss?URL=search-alias%3Dcomputers & Field-Keywords = 578232-001
-
HP G60 - 247CL downgrade to XP
Hello. Sorry for my English... I know it's very bad.
I am trying to downgrade a laptop G60 - 247 CL from Windows Vista to XP, but I couldn't find any drivers in the official web. Anyone know where I can download them?
Thanks to advice!.
(I hope you could understand me )
Hello
First make Vista Beckup. Information how to do it here.
Then update your Bios here.
Remember, also, that you use the Windows XP SP2 version. If you have not got the version SP2 here you can download this service pack
and here you guide how to integrate this file with your new system of nLite.
In this program, you can even burn your new XP cd with this driver.
Drivers for this model:
Nvidia Chipset, (install and reboot before other drivers) here
MS-UAA (a reboot before the Audio and graphics driver is required) here
NVIDIA 8200 M graphics here
Conexant HD Audio here
Conexant HD AUDIO Soft Data Fax Modem with SmartCP Driver hereSynaptics Touchpad here
Broadcom Wireless here
Realtek usb 2.0 Card reader here
.NET framework (required before HP Quick Lunch Buttons) hereHP Quick Launch buttons here
If you have had for 7 unknown devices (buttons drivers) here
Installation-> right click machine.inf, choose install.
Maybe you are looking for
-
Updating an iPod touch 3.1.3
How do I update ipod touch 3.1.3 when it was new in 2010? Did not open my purchase til this spring.
-
I just run the System File Checker, and it's errors that have not been fixed. What should I do now?
-
Normal reboot a server DB is a good practice?
Hi allRecently, I hit a bug "Bug 10194190 - Solaris: spin process and/or ASM and DB crash if RAC instance > 248 days ( Doc ID 10194190.8 )" "One solution is to restart the Server DB regularly.I would like to know if control restart a server DB is a g
-
Place of transition under culture?
You can place a transition below a culture? I have grown my film to give it a look of big screen, and then I decided to put a dip to white transition. I can't figure out how to place the transition below harvest, so black cropped area will turn white
-
I have the creative cloud on my laptop, but find I would like to have on my desk where there is more room. I can load it on a second computer for the same price and if so, how do I change the email address to download?