HP G60 Unintall feature stop working

Similar Questions

• Aero Peek features stop working.

  I tried to reach the service the customer in this respect, but whenever I type in my product ID of Windows 7 to help it says "there was a problem with the product ID.  Please re - enter... "and I can not get anywhere.

  In any case, I've just upgraded to Windows 7 a few days ago.  I noticed that the characteristics of transparency and peek stop working after a while.  Sometimes it's for a day, sometimes only a few hours.  I made sure that all the options are checked on Aero in the Panel of control Performance and information tools.  The only way to get these features is running again is to restart the computer.

  Here are my computer specs: HP a6755y.  Windows 7 Pro 64 bit.  6 GB OF RAM.  AMD Phenom 2.2 Ghz.  Video ATI HD3200 card.

  Help, please!  It is very annoying.  Thank you.

  Hello Brian5987456,

  I could go to the HP website and see if they have updated all drivers for your videocard ATI HD3200. Make sure that you get the right driver for Windows 7 64-bit.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3870521#N1410

  If they do not have an updated driver, you can check with ATI.

  You can also view a clean boot to see if there is any other software which may be in conflict and cause a problem. Use this article for steps to a clean boot.
  KB 929135 - how to solve a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Recurrence feature stopped working in 2016

  Hi, I have a function that has stopped working when I upgraded to 2016, I for the life of me can't see why.  What is happening is the second time that the query runs it overwrites the first and stops.  It does not perform the first full query.  What Miss me?

  It seems that this could actually be a bug with ColdFusion 2016: Bug #4126393 - cfloop on a query of local scope of service ends early iteration

  The good news is that it is supposedly fixed.  The bad news is that the fix has not yet been made public.  You could go to vote that it upward.  I add a vote and a comment that other users are affected.

• I have a HP 1210v all-in-one printer scan feature stopped working?

  I ran the HPPSdr.exe diagnostic tools 2.0 untility and he said I have a HP TWAIN scanning error, a required component could not be found or has been incorrectly installed. Uninstalling, reinstalling the HP IMaging device and try to scan the image. I went through this ordeal and their guided solution and it is still saying HP TWAIN Scan SCANNING error, registry, Manager HP flow. He sent a test page, and it always produces the error. The scan button is just flashing on / summary and analysis will not start, then the light becomes stable. The error number produced was 4, [0,0,80040154), (2,68,8004001c),(0,0,0),(3,68,0)] I have win 7 OP system so now some features that I can't use, but I was still able to use the "scan" button before this evolution.

  If you were able to scan previously on Windows 7, you get lucky.  According to this document scanning, copying and buttons PhotoSmart Essentials does not work.  You should always be able to scan using MS Paint, however.

• Automatic "set associations" feature stopped working - how can I reset it?

  Running on Windows Vista Edition home premium & use hotmail to send.

  I had yesterday a prompt to update my "Real Player" that I did and in the process it has automatically installed Google Chrome - that I did not open, but simply removed from the line of Control Panel programs.

  Since then, I have been unable to open links in incoming emails and get the prompt "set associations" which is a bit silly, because I have no idea what is the file or its extension that I can't open it...!

  I tried Microsoft Customer Support - who did not to any medium, be it VERY DISAPPOINTING, just kept trying to SELL me a technical support. All they provided was a 'repair' link number 50194 - that didn't work!

  So is - anyone can help with a SIMPLE step by step to either reset is / was regardless of the service or reinstall the function that does anything in the background to open the e-mail or website links.

  Please NOTE - I am a simply an END USER and not somehow a computer technician.

  Thank you.

  There is a checkbox in the installation of Real Player allowing you to indicate the installation not to install Chrome.  You should always read what says the screen when you install things.

  Uninstall Chrome.  Click Start > Control Panel > uninstall a program.  Select Chrome.  Click on uninstall.  There may be additional steps and should contribute to this thread two years ago: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/cant-open-hyperlinks-after-uninstalling-google/e6d33ac6-6b4b-e011-8dfc-68b599b31bf5

• G70-460: g70 uninstall feature stop working

  Connection to the local network, the problem started with an update of the printer that was not properly installed but now nothing will uninstall in Control Panel.

  After using the windows 10 upwards which could not solve this problem, I decided to use the windows 10 reset that reinstalls windows. The only downer was having to reinstall several apps but problem solved.

• Dodge stopped working in iMovie10

  I'm in the middle of a project where I've used audio Dodge to cut the backing track when a voice-over comes on.  Everything worked well for the first two, I tried, but now NONE of them work.  I have the box "Low Volume of other music video" checked and the cursor is set (as it was before).  The continuous backing track just at the same volume via the voiceover.  Very annoying!  Is it a bug that anyone knows of that would have made this feature stop working?

  Congratulations for all the suggestions.

  DBC

  I have not seen this problem posted before. Do you see a Visual change in the volume level line but does not change the actual sound level or the indication of line volume change not be? This seems to be a glitch so try iMovie, hold down the command and option of restart and select Delete preferences. One solution is to use keyframes to Dodge.

• Screen touch S410p has stopped working

  Touch screen of my laptop feature stopped working just in time. When I turned off my laptop, tere this update of windows which lasted more or less an hour. After that, the touch screen has just stopped working. Note that there is no installation program before uninstall antivirus - all programs and files in the laptop is as it was when I bought it.

  Running Windows 8 unilingual laptop

  We'll see. I didn't know what exactly I did, but the touch screen feature is stable now - more no stop service after a certain time. I upgraded to 8.1 and windows updates installed. Who must have done the trick. in any case, I thank very you much for helping me with this problem.

• Device stopped working for ergonomic keyboard 7000 zoom

  Original title: Zoom feature stopped working.

  The zoom on my 7000 keyboard ergonomic function has stopped working. I need help to restore it because I do not need to have a large font.

  Hello Ann,.

  Please write us with the following details.

  1. Are you referring to the natural ergonomic Desktop 7000?
  2. You did changes to keyboard settings?

  You could deal with this issue when driver is corrupted to if there is some incorrect settings. I suggest you follow the steps in the link below, if you are referring to the natural ergonomic Desktop 7000.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  If you are still having the same problem, please contact support team of material on the contact information below.

   

  Contact us

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Email us if you encounter any other problem related to Windows.

• I bought my dell studio with webcam 2010. Not long after that I bought the audio has stopped working. What is so frustrating, is that there is no troubleshooting feature...

  Why dell webcam is not a feature of troubleshooting? Is is just a piece of garbage that is thrown in to make believe that you get something of value?   the audio has stopped working shortly after I bought it and there is nothing that I found to try to recover

  Hi Susan,.

  1. are you able to hear the system sounds?

  2 are you facing any problem with Dell webcam?

  3. What is the number of the model of the computer?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  To resolve the problem with the sound, I suggest to refer to article and follow these steps:

  No sound in Windows

  If the problem is not resolved, please respond with more details.

• When you try to click on programs and features, updates of Windows or default programs, get error "Windows Explorer has stopped working"

  I have problems with the programs and features, windows update, and default programs. An error pops up - indicating windows Explorer has stopped working or windows Explorer restarts. Each window then closes. Can youhelp identify me what is happening?

  * original title - when I click on programs and features, update windows, said default programs windows Explorer has stopped working? Or reboot, then this window stops? What is going on? *

  Hi Mr. Minister,

  Your question is still there while in Safe Mode? If so, you try to run a SFC scan for troubleshooting the corrupted system files on your PC.

  To perform a scan of the SFC, follow the steps on the following link: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  Your computer may also be infected and needs to be cleaned in order to work properly. I suggest that you try the steps listed in the related post below with your question:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/f26f7291-d646-4870-864e-a31976df0011

  You can also try a clean boot troubleshooting method to see if it helps you solve your problem.

  I hope this helps.

• Hi, I'm on a PC running windows 10. I just started using Lightroom CC and wildfire and feature drop for the sorting of the pictures in collections has stopped working. can someone suggest something please?

  Hi, I'm on a PC running windows 10. I just started using Lightroom CC and wildfire and feature drop for the sorting of the pictures in collections has stopped working. can someone suggest something please?

  Your catalog backup and reset the preferences as mentioned wobertc

  Press the shift and Option on Mac, or the shift and Alt PC (windows) keys. Select Reset preferences

  

  ~ Assani

• I have Acrobat 9.5 and when I try to create > pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  I have Acrobat 9.5 and when I try to create > pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  Providing you have Acrobat 9 installed in an operating system for which Acrobat 9 is compatible then you can use the feature.

  So, you need a scanner connected, turned on, and the software installed. Acrobat 9 "prefer" TWAIN drivers.

  Always visit the site of the provider of the Analyzer and download - install the latest version of the greatest software.

  n.b., The Acrobat 9.x product family moved in the middle of the "End of Support" year 2013.

  Thus, the family of products Acrobat 9.x is not compatible with contemporary operating systems.

  Be well...

• Scripts to stop working when lying down with the 'extra features '.

  I have a few scripts that work very well to both Pro and the player, but when I Save As-> Reader Extended PDF-> activate additional features, they stop working (both Pro and player). Other scripts in the same form continue to operate perfectly. I am at a total loss, and so are my IT people (who certainly aren't exactly experts form/JS/Adobe...)

  I fight with this problem and for a week or so now and I tried a couple of different approaches - I'm a JS pilon, and I'm sure that there are more effective ways to do what I want to do. But what I'm trying to give me a different problem . I'll try to separate different issues in different positions... but I'm confused enough!

  For what it's worth, problem scripts are on the first and last master page, while those who are working is on normal pages.

  The goal is to reuse a partially completed form for several different phases of an approval process. Each version gets a different title and a further subform is visible during the phases of 2nd, 3rd and 4th.

  Here are the global workflow:

  • Phase 1
    1. The form begins with the title of Phase 1 and the additional subform 'hidden '.
    2. A remote user fills out the form and return to the program coordinator.
  • Phase 2/3/4
  1. The Coordinator saves a copy of the form with a different name.
  2. The Coordinator checks a check box "for admin use only" to show a group of radio buttons. Each option modifies the title and sets the presence of additional subform to "visible".
  3. The Coordinator Unchecks the check box "for admin use only" to hide the radio buttons.

  The title is in a text field. Scripts change the rawValue of the field for each option.

  In this case, I have the following script to initialize it and calculate the event of the text box:

  If (S_SelectTitle.S_Actions.RB_SelectTitle.rawValue == 2( )

  this.rawValue = ' Phase 2 ';

  otherwise if (S_SelectTitle.S_Actions.RB_SelectTitle.rawValue is 3( )

  this.rawValue = ' Phase 3 ';

  otherwise if (S_SelectTitle.S_Actions.RB_SelectTitle.rawValue is 4( )

  this.rawValue = ' Phase 4 ';

  on the other

  this.rawValue = ' Phase 1 ';

  and a similar code in the events, initialize and calculation of the subform to make his presence 'visible' or 'hidden '. (I used this strategy before initialize/calculate event, it has always worked well. But I "(ve rencontrer deles de problèmes avec elle dans l'une deles de approches remplaçant je me sers dans le présent formulaire, donc je suis totalement ouvert àles autres moyens de le faire...)"

  Until I developed the form for the reader, it works fine. The changes of title properly selected button, the new subform appears at the end, and option buttons disappear when the box is unchecked.

  After I extend for reader, nothing works except the checkbox. The title does not change, and the subform never appears.

  Help? Thanks in advance!

  Well, it seems that the interactive objects on master pages are problematic. Using a few of message boxes, we discovered that the Initialize event fires whenever a radio button on a master page is selected, but not when the radio button is in the body of the form.

  So whenever we clicked on the option button on the master page, the event initialize the value of the group just exclusion set back to the default value (which was zero, in this case). So the title never changed, because the radio button setting glue.

  For this form, I found a way to remove the option buttons in the master page. Not only the titles in headers change correctly, the form also works with the enabled extensions Reader!

  I don't know what problem was hanging me up - the buttons on the master page or Reader extensions - or if they are tied together in some way. But the moral of the story for me, anyway, no more buttons on master pages. Hope this helps someone else!

• "Share" feature in the Finder (or other applications) has stopped working.

  Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

  The Share button shows 'No. Service' or missing menu items?

  https://support.Apple.com/en-us/HT203129

  If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

  https://support.Apple.com/en-us/HT204904