HP G70 laptop computer 111ea: HP G70 HDMI, windows crashing

Similar Questions

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• Pavilion x 360: tour of laptop computer during the upgrade to Windows 10 stuck on the hp logo

  I was upgrading the laptop for Windows 10 and after that it restarted, it got stuck on the logo of hp for about 30 min. I turned it off about 3 times and it is still stuck on the hp logo.

  Once the recovery to Win 8 is completed, considering the upgrade to 10, here are some tips:

  > http://support.hp.com/us-en/document/c05195282

  > http://support.hp.com/us-en/document/c04730900

  Make sure all your drivers are updated before moving to 10 - use HP Support Assistant

  Make sure you that all of your software security (AV, firewall, etc.) is uninstalled before upgrading - reinstall the upgrade of the post.

  If you decide to not upgrade, please note that Win 8/8.1 is good OS and will be supported by Microsoft until the year 2023.

• Pavilion 2004tx g6: laptop computer stucks on screen in windows 8.1

  I have 8.1 installed windows on my laptop and for some time, he started to stuck on the first screen in the office. I tried with a new installation of windows, but it did not work. Also, if I shut down using button / stop, and then laptop works fine but if I stopped correctly, then again it stucks at startup. I also tried with the Startup Repair tool, but he says that your pc is not repairable. Please help me with this problem

  Hello!

  Here is something you can try

  Disable the quick start option in Windows Power Plans 8.1

• Which laptop model can be installed in Windows Server 2003 and PIA?

  People,
  
  Hello. The PIA (Weblogic and Tuxedo and SQL Server) and the PeopleTools are compatible with Windows Server 2003 or 2008. But it is not compatible with Windows 7. Because my HP laptop is installed with Windows 7 and can not be installed on Windows Server 2003 or 2008, I need to buy another laptop to install Windows Server 2003 or 2008 PIA and PeopleTools.
  
  I need to know what model of laptop computer can be installed on Windows Server 2003/2008 and double boots several operating systems. Everyone installs Windows Server 2003/2008 and PIA in any laptop? Please tell me the model of the laptop.
  
  Thanks in advance.
  
  Lucy

  Any modern laptop with lots of RAM (> = 4 GB) and hard disk space, within capablities of 64-bit virtualization should be well.
  Even if you have Windows 7 OS to host, you can still install a virtual machine software installable on top of your operating system (for example, VMWare), then install an operating system supported as a virtual machine (called guest operating system). You will work on this virtual machine, exactly as it was a server, waiting for your host what OS is also running, no need to dual-boot.

  Nicolas.

• HELP: Laptop computer plug on TV with HDMI

  Hello

  I'm trying to connect my laptop to my TV with HDMI.  Audio plays in my TV speakers very well.  However, my laptop screen is not mirrored back to me on my TV screen.  How can I solve this problem?  My wallpaper appears on my TV but the icons are missing.  When I drag my mouse to the top corner of the screen of my laptop, it will subsequently appear on my TV screen.

  I watched before videos on my TV while my laptop is connected and everything was fine.  For some reason when I plugged on TV today, a default window popped up and he adjusted the settings (I hit very well without thinking about it, and now I can't fix it).  SOS!

  Any help would be greatly appreciated.

  JEL

  In the display settings (Control Panel, personalization), click on your secondary monitor (TV), and then click to uncheck the box next to "extend the desktop to this monitor". Buttons-click apply then OK to exit.

  Or you can just move windows to the second monitor:

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• Laptop HP TouchSmart 15: Audio HDMI notworking

  Hi team,

  After the upgrade to 1604 10 update Audio HDMI windows does not work in my PC laptop HP TouchSmart 15,

  non - model E6F34PA #AB4

  I tried almost all possiblties Google serach.

  1 put updated driver from compmgmt.msc

  2 re-ntsall IDT Audio driver of Intel

  2. use of the easy software I have updated all drivers.

  but it still shows no Audio HDMI sound source.

  

  When to check event under driver, I found the message below.

  Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000\4 & 2ffee478 & 0 & 0001 requires installation.

  

  could you please help on this issue.

  Thank you

  Riou

  Hello:

  Here's what you need to do to get the HDMI audio to work...

  Download and save, but are not run this graphics Intel W8.1 driver.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Download and install this free utility for files.  The 2nd file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, right-click on the file of the Intel graphics driver that you downloaded.

  Select 7 - Zip from the list of items.

  Have 7-zip extract of: and leave it to decompress the file in the file name (sp63750).

  After 7-zip created the driver folder, go to the Device Manager and click on the Audio device high definition with the! Select this option.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and the Intel HDMI driver should install.

  Then restart the PC, and you should have video and audio plays from the HDMI port output.

• After syncing firefox from one laptop computer to the other, I repeatedly get syncted phone has the same IP address as the original. Reverse?

  One of the results of these two laptops with the same IP address was that the original laptop computer proxy settings have been changed and I could not get into the internet. After you restore the default proxy settings, I again had access to the internet, but two laptops always have the same IP address.

  You do not use DHCP to automatically assign different IP addresses?

• I downloaded iTunes on a new laptop computer and he allowed. First of a süden, I can't sync my iPhone 6. What can I do?

  I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• Laptop computer charger plugged in but not charging

  Hello

  I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after awhile it again starts.

  Sudroid.co.cc

  There is a BIOS update available that is specifically for the intermittent support question. I recommend you to install.

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

• My laptop does not recognize the HDMI cable

  I don't know if I posted this properly, but I would really like for you to tell me a little more about HP pavilion 1 TB of hard drives.

  I bought a HP Pavilion processor with ADM 1 to less than a year ago. There was whisky spilled on it a couple of months before the summer, but I managed to get back to work and it was very good and stil in good shape.

  A few weeks ago, I dropped the laptop from the desktop and it fell on a carpet. Isn't difficult, but not smoothly either. And it is always on when I got it up and working.

  When I stopped it the laptop refused to start. I did a quick diagnosis to check the hard disk and it says already something with red letters.

  I took the laptop PCs store and human a glance told me, the hard drive is dead and I need a new one fitted. "Everything is in good condition", he assumed, and I agree with him to change the hard drive.

  I told him specifically to replace the hard drive with another 1 TB, but he subsequently advised me with good confidence that I was better with a 320 and buy an external hard drive. The laptop will work very well in terms of speed. He mounted in a 320 HARD drive and gave me back my laptop with Windows 7 ultimate.

  Now, the laptop does not connect to HDMI and AMD catalyst is recognized not no matter how many times I install it. And honestly I don't know if the man really had something out of my laptop. The HARD disk he gave in return tells me his Samsung S/N: S34LJ9BG601601648

  ST2000LM003 A REV.

  PN:HN - M201RAD/M 2000 GB + 5v 0.85 A

  Please tell me that it is a HP Pavilion HDD and how can I get the laptop to recognize the HDMI connection on the flat screen TV?

  PS: I checked the amount of space to the new HARD drive that had been installed in and it said 297 GB not 320 GB. Am I missing something? Why can I not see all of the HARD disk if it is 320?

  Sorry for the long discription, I stop here.

  Nope.

  Try this:

  Click on the link below to see how to find your model number...

  Computers how can laptops HP - I find my model number, the serial number or product number?

  Scroll to option 3 to see what to look for an explanation.

  Let me know.

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• HP15-g088ca: HP 15 laptop computer purchased less than 2 years ago. Broken hinge, display cases of separation. HP, please help.

  My son uses his laptop computer HP15 home to his office, rarely transporting.  He never gave it and a sweet user.

  The left hinge seems to be broken / defective, and separates the window.  For now, we are all leaving the screen open all the time, but it's a little awkward and the problem is certainly on a laptop less than 2 years old.

  Looking at the forum, it looks like a common problem.

  We are fans of HP in general, so I hope that this problem can be solved.

  Help, please.

  -Steve

  Hooray!

  HP solved the problem free of charge, including shipping in both directions and repair.

  It took ten days in total, and we used the laptop without a problem for about 10 days more.

  It seems that the hinges for laptop and the display case were entirely replaced, and no data has been lost.

  My son is thrilled to have his laptop in return, and to my eyes, HP just went through.

  I wouldn't hesitate to buy another HP product, although I confess in the hope that:

  (1) HP manufacuring no longer uses defective parts

  (2) HP treats everyone with this problem of hinge with the same care

  Thank you and HP support HP!

  -Steve