Pavilion 2004tx g6: laptop computer stucks on screen in windows 8.1

Similar Questions

• HP Pavilion 2016tx g6: laptop computer stuck on the home screen

  Today, I installed Windows 8.1 pro oem activated in my hp laptop. After completing the configuration of my began laptop freeze. I didn't install all alone application.laptop escalates much too and the fan runs faster than usual. Its very difficult to handle the laptop in such a condition. Please help me

  Thanks in advance

  Hi @basilutd ,

  Thank you for your query.

  I understand that after the upgrade of your laptop for Windows 8.1 pro your laptop is overheating.

  When I checked the driver page for your laptop on Windows 7 there are two bios updates.  Haves you updated the bios.

  Here is a link to the drivers and software Notebook Pavilion g6-2016tx where you can get them.

  HP Notebook PC - updated BIOS

  As an update of the bios has a potential to cause damage, I suggest to contact HP support by using this procedure.

  Here is a link to HP desktop computers and laptops - troubleshooting an overheating and Auto Shutdown problem which can also help.

  Please make sure that you have installed all updates recommended for your laptop driver and did all your Windows updates.

  Good luck!

• computer stuck on screen-light windows mobile bars but is not anywhere - safe mode feezes when loading drivers-system restore did not work

  Dell ionsipion 1525-VISTA OS - computer when asking to start the normallyor launch startup repair... .errors will not fix, go to the windows... page only the microsoft corporation and bar shows - lights on the bars are moving.  If I hit f8 and try to start in safe mode-sfe mode freezes while it loads the drivers - if I try the system restore, it says I have a corupt file and when I run disc chk it says all files are OK but then it asks me for another disc that i have not... any ideas

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And it means Dell back to factory settings if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Satellite Pro L500 - press Fn key blocks the laptop computer to blue screen

  Hi all
  First post so please ask if I did not include all the necessary information.

  I have the Satellite Pro L500-1TX (Win 7 32 bit os) and everything worked fine including the Fn menu drop-down button.

  Now, whenever I press the Fn key, it blocks the laptop to a blue screen. The computer then restarts automatically and that it was an unplanned shutdown offers the usual safe mode option.

  Unfortunately, I do not know when this started as I do not use the fn often hesitate so just do a system restore. I don't know how far back to go. It was several weeks before I associated accidents hit the Fn key.

  Any suggestions as to which Toshiba drivers may need to be reinstalled. The computer otherwise works fine.

  Cheers in advance
  MTV

  Great! Thanks for this feedback that I also found other threads about Support Flash Card utility and it is the tool command keys FN so read the forum in other threads contributes without doubt! ;)

• How to open the Pavilion g6-2210us laptop computer to install RAM?

  I have a HP Pavilion g6-2210us laptop PC running Windows 8.  He came with the bar of 1 to 4 GB memory and has a foul slot up to 4 GB of RAM.  I bought another 4 GB module and intended to install today, but I don't know how to open the bottom of the computer to install the RAM.

  I have a Compaq laptop that was new in July 2007 and he has a sign on the bottom that covers the compartment memory and a separate panel that covers the hard drive.  Each of these panels can be removed by loosening a few screws and pulling the top of the Panel.

  But with this new HP Pavillion-2210us g6, I see a big sign which applies to sites of memory and hard drive.  And there is only one screw.  Everything simply loosen this screw does not allow the Panel to be raised.  So I suspect the slides Panel stop someway.   Can someone explain how the Panel is removed?

  Hello

  See Page 49 of your & Maintenance Guide.

  Kind regards

  DP - K

• Ports USB 3.0 on HP Pavilion dv6-6015tx laptop computer

  I have a HP Pavilion dv6-6015tx-Notebook that I've upgraded to Windows 8.1 (transcript).
  Now my problem is that when I connect my USB 3.0 drive to my laptop the transfer speed is not more than 40-45 Mbps. So, help me and tell me which two ports are USB 3.0 ports in my laptop (that I'm not sure about that).
  Earlier, I used to get the speed of transfer of 90-95 Mbits / s, but after a few deiver updates and do not know what it has reduced.

  The usb 3.0 ports will be a symbol of the SS (superspeed) marked next to the USB symbol.  You need to install the usb 3.0 for Windows 8.0 driver (if available) for the performance of usb 3.0. I'll check to see if it is and provide a link.

  There is no driver for windows 8 usb 3.0 available for download. You may need to install Island version Windows 7 in compatibility mode. It may also be available via Windows update.

• HP Pavilion TouchSmart 15-n005: laptop computer stuck on loading home page

  I've recently updated ITunes and asked to restart my laptop in order to complete the update. After the reboot, when trying to log in I was kept waiting on the loading page that says welcome. I restarted twice now times have stayed for more than 10 minutes, I'm on my third reboot now and I was kept waiting on the home page of loading for more than half and hour. I would appreciate help as soon as possible because this is the laptop I use for assignments and work!

  Hello @Jacquihenman,

  Welcome to the HP Forums, a great place to find answers!

  I came across your post and want to help you solve the problem with your HP Pavilion 15-n005 not start correctly. This can be caused by a few different issues, so first of all that they have to be narrowed down.

  Please start by a hard reset. Once the laptop is back on follow the directions under "the computer crashes to the screen of the HP or Compaq logo or the Windows loading screen" of this document:

  Computers laptops HP - computer won't start (Windows 10)

  You can also run the trial extended, as he stated in this document.

  I look forward to the results!

  If this information was useful, click on the thumbs up!

• ASUS laptop computer stuck on reboot screen after system restore

  Hello

  I did a system restore on my laptop and asked that it be returned to the State where he was 3-5 days ago.

  It was all going well until he came to turn it back on - it is now stuck on the screen to restart for almost 2 hours!

  I don't want to cut to the case that it damages, but I don't know how to get out of the reboot screen.

  Any help/advice would be much appreciated :)

  Hello

  This problem could occur if the system restore was not completed successfully.

  If the computer is blocked at the start screen, I suggest you to restart the computer and see if you can start the computer normally.

  If this isn't the case, I suggest you to perform auto repair from WinRE. Check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  (a) to Insert the media (USB or DVD) and restart the computer.

  (b) key press F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive that you inserted the installation media in.

  (c) once the Windows Setup window appears, follow these steps:

  (d) click Next , and then select fix your computer.

  (e) you will see a blue screen and a option to choose.

  (f) select the Troubleshooting option and select Advanced options.

  (g) you can choose automatic repair in Advanced startup . option

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Pavilion x 360: tour of laptop computer during the upgrade to Windows 10 stuck on the hp logo

  I was upgrading the laptop for Windows 10 and after that it restarted, it got stuck on the logo of hp for about 30 min. I turned it off about 3 times and it is still stuck on the hp logo.

  Once the recovery to Win 8 is completed, considering the upgrade to 10, here are some tips:

  > http://support.hp.com/us-en/document/c05195282

  > http://support.hp.com/us-en/document/c04730900

  Make sure all your drivers are updated before moving to 10 - use HP Support Assistant

  Make sure you that all of your software security (AV, firewall, etc.) is uninstalled before upgrading - reinstall the upgrade of the post.

  If you decide to not upgrade, please note that Win 8/8.1 is good OS and will be supported by Microsoft until the year 2023.

• CD/DVD does not read discs on Pavilion G6 2293SA laptop computer running Windows 8 :(

  Hey there

  I would be very grateful if someone could help me with this.

  I bought the G6 Pavilion in November last year. When I got home I went to a recognize (as recommended) recovery disks but the laptop there is a blank disc in the drive. I tried a couple of different brands, but nothing worked and I got to the PC world. They couldn't work out what the problem was if gave me a replacement, and exactly the same thing happened. They claimed that it was probably one of the "many problems with window 8'. Finally, I tried some Sony DVD - R discs and it worked (hooray!).

  However, since that time the player rarely works properly. It seems to work ok program disks, but don't like them burn all discs. It has never worked through iTunes, for a few days, it let me burn some discs of music with Cyberlink Power2Go but it no longer works.

  Sometimes when I go hard disk it will say there is no disk in it (when it exists) or is it in use? We'll see what he does today... OK, Virgin (Sony CD - RW) drive... the hard disk is whirring... but nothing happens on the screen. OK, navigate to my computer... Double-click the icon and it says: "How do you use this disk" and gives me two options: "as a USB' or 'player with a CD/DVD '. However, it only allows me to choose the first option (which I don't) and even if I click ok on the flash drive option, it says that the drive must be formatted, mess around trying to do for about 10 minutes and then says format failed.

  Can anyone suggest anything? PC World that it is a software problem and my problem (thank you guys). Really grateful for any help.

  See you soon

  Paul

  I suggest using the corresponding update firmware in the driver download section.  Who looks more like a problem of hardware/firmware for me. Use Device Manager to select the firmware update software good optical disc. If the firmware update does not resolve the problem, thencontact HPfor warranty repair.

  Best regards
  ERICO

• HP Pavilion dv5-1002nr laptop computer of errors on adapter 6T 04, Code 10

  I am trying to repair a laptop HP Pavilion dv5-1002nr who cannot connect to the internet, because the adapter 6 T 04 has problems.  As a first step, I believe that it is Code 31.  I've uninstalled and reinstalled the driver using Device Manager, but now I get an error code 10 (device cannot start).

  I think it's originally connecting wireless to fail.  I cant get onto the internet to download windows updates.

  I need to clean the system and reinstall Vista?  ANY suggestions would be greatly appreciated.

  Vista Home Premium Service Pack 2 installed

  * original title - Windows Vista 6T 04 error - help! (Code 10 after reinstall) *.

  http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929

  Read the exact answer above by:

  Lionel Chen

  Microsoft online community support

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Envy 15-j140na: black laptop computer at startup screen

  HP ENVY 15-j140na
  Product no: J0B97EA
  2 years
  
  When I try and turn on my laptop, the screen does not turn on.
  
  The fan comes on full power for a second or two then quit entirely. After 10 seconds, the fan can be heard gradually increases to a normal level. Meanwhile, no activity on the screen.
  
  The power light is on with the wifi led
  The led caps lock flashes in a sequence of flashing 2 with a long interval between
  
  I tried:
  hard reboot
  BIOS reset by pressing win + B keys when you press the power button, but it doesn't seem to do anything
  
  Any help would be appreciated

  I solved this by downloading the update to the bios on a USB key and plug that while doing a startup in the bios. My laptop is now working well

• Hard drive test failed on HP Pavilion dv6-1100eo laptop computer

  I have a HP Pavilion dv6-1100eo Entertainment Notebook PC (P/N: NR597EA) with Vista 32 bit.  Unfortunately no guarantees left in, and in general I was very satisfied with this laptop.

  But suddenly Wondows would not start up - and it has yet to start Recovery hard disk partition. As I didn't know if this start was on hard drive or not - I ordered the DVD of recovery system for this version of Scandinavian language.

  These discs didn't work - so I thought that I probably did not my homework before ordering these disks.

  So I ran Diagnostics System (even if I have an older version of BIOS F.03).  On the diagnostics - test hard drive fast and complete failed during the first 1% analysis.

  Is there something that can be done - or is the only option new hard drive? In the case - the what hard drive is recommended is too cheap - because I don't want to invest too much in a book soon 3 year.

  Recently I have bougth an external hard drive (1 TB) based on the USB connection. That allows bypassing the HD internal. In this way I would increase HD capacity and not invest more in this notebook - since I already have the recovery DVDs

  It's probably a matter of time before I go buy a new HP laptop - that is why I don't want any long standing patch this problem.

  Hello

  Sorry to say, but you won't be able to install or boot from external HARD disk Vista, so if you need to get the workbook, you will have to replace the internal drive.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 57 of your maintenance & Service Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  Kind regards

  DP - K

• HP Pavilion DV6500: TV laptop computer connection

  Hello

  I just installed Windows 7 and am trying to connect my laptop to my TV. However, when I go to control Panel\Appearance and Personalization\Connect to an external monitor, I don't see the second monitor. (Have used an HDMI cable to connect to the TV).

  p / n: KB341EA #B1A

  Can you provide any help?

  Thank you

  Ioannis

  Here's what I suggest you do.

  Go to the Device Manager, expand the category graphics cards.  Right-click on the graphics card from nvidia and select uninstall and check the box uninstall driver.

  Restart and use the Vista of making driver in charge of your laptop and driver as follows page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-59557-1&cc=us&DLC=en&LC=en&OS=2100&product=3642170&sw_lang=

  Download and run the above driver.  You can get an error not supported operating system.

  Conclusion of any windows error.

  Go to Device Manager, click to expand the category graphics cards, click on the VGA Standard card.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp38834.

  Make sure that the include sub and the driver should install.

  Restart, and I hope that you will now be able to connect to your TV.

  If this isn't the case, then it will not happen.

• Pavilion G6 2005ax: laptop computer charger circuit problem

  My laptop HP G6 will not charge the battery and is not able to run with only one adapter. The charge LED lights up not at all. The laptop requires the battery to start but once it starts, the laptop is able to operate using the power of the AC adapter. I took it to a local service center, and the guy said that the motherboard has a short circuit and needs to be replaced.

  I decided to try to fix it myself. I used a multimeter and found that the power adapter and plug DC work correctly and give output 19.5V. However, when I tested the pins of the battery meter showed a power of only 2, 6V. I'm guessing that there is a problem in the load circuit. Can someone help me?

  Thank you.

  Hello @Prad3791,

  I understand that your laptop encounters a problem with the circuits on your computer to charge, and I'd be happy to help you in this case!

  Given that your motherboard has been identified to have a short circuit, please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  I hope this helps!
  
  Concerning