HP h8 1534 power?

Similar Questions

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• HP Pavilion p7-1534 Desktop Gaming PC upgrades.

  Hello, my current setup is a desktop PC HP Pavilion p7-1534 with all stock parts. And I want to upgrade my computer to play recent games like dogs Watch decent settings. I'm looking to upgrade everything that could make better games and faster. From now on, if I start the game it will run 17 Fps on a small windowed mode. I am fairly new to computer modding and whatnot and have done the research for this. Here's what I'm currently looking...

  http://www.Newegg.com/product/product.aspx?item=N82E16817139028

  http://www.techpowerup.com/reviews/Sapphire/HD_7950_Vapor-X/

  Suggestions or comments about them? And where to find more things I need? And try to keep a little expensive but reliable.

  Course record:

  Windows 8.1 - 64 Bit

  CPU: Amd A8 - 5500 Apu with 3.20 GHz Radeon graphics card

  RAM: 8,00 (7.39 GB usable) GB - Yes, I know how to update if I wanted.

  Graphics card: Amd raedeon HD D 7560

  Thank you!

  JuiceBlockBoy, welcome to the forum.

  The PSU is a good choice.  However, if it were me, I would buy one of their models of series of games.

  The video card is questionable.  Is 10.83 "length.  I suggest to make a model of the same size of the card to make sure it fits.  You must add at least one inch for the extra power connectors.

• A 760 GTX video card will fit in a Hp Pavilion p7-1534

  Hi all

  I was wondering if a GTX 760 video card fit in a Hp Pavilion p7-1534, if I upgrade the power of 750w? Thank you!

  Ardin, welcome to the forum.

  I have gone through two different brands of GTX 760.  One of them, ASUS, was 8.6 "in length.  The other, EVGA, was 9.5 "in length.  I suggest to take a piece of cardboard and make a template of the EVGA to see if it would fit.  It does not list an additional power connector, but I would like to add 1 "in length.  Personally, I like the cards XFX, EVGA, Sapphire and PNY in that order.

  You can easily get with a 600W at 650W power supply.  I love OCZ and Corsair.  They are passionate about quality with reasonalbe price.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Good graphics card upgrade for HP Pavilion p7-1534?

  Hello

  I just got a new HP Pavilion p7-1534 for my birthday. I want to update my graphics card because I'm a big gamer, but I don't know where to start. What are some cards compatible with this system? It would be nice to be able to get one that will run the new generation games (ex: 4 Battlefield http://bf4central.com/battlefield-4-system-requirements/) heating maximum without having to upgrade my power supply, but if not, that's okay, I'd like to see some cards at both ends of the spectrum (those who will AND will not require an upgrade to the PSU).

  Thank you for your time,

  -J

  Jay, welcome to the forum and the happy birthday late.  Congratulations on your new computer.

  The power supply unit (PSU) in your computer is 300W.  Most new mid-level video cards require at least 400W to work properly.  Any card that will work with the 300W PSU will be much better than the integrated video.  The games that you want to read will not perform just the way you expect.

  I like the OCZ and Corsair PSU.  They will provide clean and stable power for your system.  I recommend at least 500W; 550W at 600W is even better.  You can buy one of these brands for less than $100.  Both in the links I provided would do a very good job.  If you decide to buy one of them, please read all of the reviews.

  Here's a map that would work very well for what you want it to do.  Read the reviews to see what users have to say about it.  Of course, we should upgrade the power supply.

  If your problem is solved, please click "accept as a Solution.

• P7-1534 HP pavilion desktop PC, stop and sleep problem

  P7-1534 HP pavilion desktop PC, Windows 8, 64 - bit, sometimes when I turned off my PC, the PC does will not off it stays on and I have to use the power button to turn off the PC and today I put the PC to sleep and he did not wake up when I tried to wake up that I had to use the reboot of the PC power button. I did a diagnosis of memory and found no errors.

  Hi dwellas

  I understand that you are having problems with the computer is shut down and not being able to wake up.

  You can have an application or process that runs in the background that not stop correctly. Close all applications on the status bar that you can, make sure you first close all programs, and then try again. If this works, you should see what you have installed which can be the cause of this.

• HP Pavilion P7-1534: Pavilion P7-1534 won't drive or CD boot

  Hello!  I have a desktop HP Pavilion P7-1534 Windows 8.1 running with all the updates, also running ZoneAlarm and Norton Internet Security (basically only running Norton AntiVirus).  The computer started recently do not start.  Here, I was able to start fan (s) and what appeared to be the hard drive turns to the top and make a kind of movement of the head, but nothing else.   I've forced a stop down and then press the power button again, if often starts very well.  A few times, it took more than one attempt.   I backed up my system.

  Once the system booted successfully, it doesn't sem to be any problem to launch system - reading and writing to disk, running the software.  For me, that doesn't sound like a record hard problem, but I didn't know what my options were to solve the problem.  Replace the drive would be expensive (1 terabyte disk), especially if the drive is not the problem.  For my TI could be the motherboard or something having to do with UEFI (if this is the current "BIOS").

  I decided to leave the computer and no restart and was able to do as well.  Then the cursor changed to a few strange characters - looks like a corrupted icon, so I tried to restart, and that failed.

  Now, the system does not boot at all.  I powered down and back up repeatedly without success.  I don't seem to be able to start in the UEFI, if possible, even that s.  I tried to boot into a DVD with the Norton Bootable Recovery Tool, but without success, either.  I opened the case and reconnect the cable from the drive to the drive and the motherboard.  Couldn't think of anything else to try.

  Any ideas?  Thank you very much.

  Nuccii, I apologize for the delay in answering.  After your last suggestion, I asked the help of a friend with techies.  He was able to verify that the food was good, memory was good, and the disc was good.  He was trying to see if he had access to a system in which he could try my processor.  He couldn't, but it took four weeks for him to get back to me!  I get to ask a busy friend who is probably receive queries from others, and who has a life.

  At that point, it seemed that the main possibilities were the CPU or the motherboard.  Because when I was (barely) able to start before starting failed completely, the system ran very well once he had started.  I decided to take the risk and bought a mother Board of the same type that I had in my system.  (First time I replaced a motherboard, but I went slowly NS with care, have watched some relevant videos and made sure to mark where each connector went down).  The result is that the system is running.

  Thank you for your support and suggestions.  God bless you!

• What Retrofits for my stock HP Pavilion p7-1534 to play Planetside 2 on ultra?

  I have the HP Pavilion p7-1534, bought at best buy, all parts are parts from stock

  I usually play games on medium or low graphics with about 15 to 25 fps

  Lag is usaully also

  I was wondering how and what updates, I couldn't make a better gaming platform?

  Haven7, welcome to the forum.

  Here is the Product Specifications page for the computer.  You can watch the informtion upgrade the processor, memory upgrade information and sections of video graphics.

  It would be the biggest gain of the addition of a discrete video card performance.  I love the cards XFX, EVGA, Sapphire and PNY in that order.  The card must be PCI Express x 16.  This, however, includes a power supply unit (PSU) upgrade.  The power supply of the computer is 300W.  Latest intermediate level maps require a minimum of 400 w to work properly.  Normally, I would recommend a block of at least 500W Power SUPPLY; 600W will be even better for the possible future upgrades.  I love Corsair products.  They are passionate about quality with a reasonable price.

  Here's a guide that will explain what you need to be informed during the upgrade the video card in the future computers with Win 8 is installed.  Read it carefully before you buy a new card.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• [Power Mac G5] Type of liquid cooling system?

  Y at - it anyway how to determine type of LCS just by looking at the case?

  We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

  But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

  So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

  Thank you...

  Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

  The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

• Exceptional activities related to power

  After that 5-6 years my MacBook battery needs service, classified as a replacement of the battery, but until I get my new battery... Please help me this is my only machine for everything I do. Recently, I see unusual activity on my MacBook, which associated powers and may be the charger cable, for example today when I connect the charger, the led light with a delay also after a few movements on cable!

  When LED on, after a few minutes, 35% collected on the status, LED changed to green and status of load emissions MacBook: 37% charged battery, then return to the normal load State!

  It is only linked to the battery mode or should I concerned about port and MagSafe charger cable? I have fixed my cable charger broken 7-8 months ago and it has worked very well.

  Thank you

  Kind regards

  Hey there alpha120,

  I understand that you are experiencing some problems with the power of your MacBook. While it looks like a spare battery is a good option for this behavior, you can also try a SMC reset:
  

  Reset the management system (SCM) controller on your Mac - Apple Support

  Thank you for coming to Apple Support communities, let us know if we can be of further assistance.

  See you soon.

• Activate App stuck on waiting and power Mode low does ' t

  Hi all

  I have at least two concurrent problems with my iPhone 6 + iOS 10.0.2 (but started with iOS 9).

  I can't install new application directly from the App Store on the phone because they were stuck in the phase of "pending". Same behavior of update of the applications that are already installed.

  The only way to update/install the app's iTunes download and synchronize.

  The other simultaneous problem is in what regards the activation of "low power mode" with the rocker switch (settings > farm > Low Power). Whenever I try to activate (manual or automatic 20% of battery) function, the gray toggle becoming in the Middle, then return to the OFF position.

  I already have backupped & restored several times, but nothing has changed.

  How can I solve this?

  Thank your

  Best regards

  Hello Axoduss,

  Thanks for posting in the communities of Support from Apple. I see that you have two problems. One is that the low power Mode is not activated, and the other is that updates and new applications are blocked pending. I know that I rely on my iPhone for everything. It is important to ensure that it works as expected. I'll be more than happy to help.

  Great job to the backup of your phone and restore. It's a great way to help solve these issues.

  If you are restoring from a backup, the problem may be in the back upward. I recommend to reset the phone to factory settings and set up like new to see if the Mode low power and installing apps works. If this does not work after the installation in the new and not after the restoration then you want to restore your data manually and not market back. Here is an article on setting up the phone as new:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Let us know if that helps.

  Take care!

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Power point

  Is there an outlet, especially for iMac computers or do you have to buy a Microsoft Power Point program which is compatible?

  Yes, there is a PowerPoint for Mac available from Microsoft.

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.