Similar Questions

• Disk W530 Hard Drive Bay Adapter problem

  W530 ordered on 14/01/2014. I replaced the 500 GB with a SSD hard drive and wanted to use the reader HGST it came with a disc of Nimitz adapter. I can delete the partition and create a new volume, but it fails during format. It fails even when it is formatted a ready to use.

  I have a 250 GB drive at 5400 RPM Hitachi which works very well in the Bay. With the help of a USB drive Bay I can delete the volume and rebuild the drive of 500 GB. Why do I have a problem with this drive in the drive Bay?

  I plugged the hot formatted disk and it lights up immediately, I backup on it now. I don't know why I got so many problems earlier.

  Thanks for the reply.

• Seagate external hard drive / / no display

  Recently I bought a Portable Seagate 2 TB external hard drive for my MacBook Air. I put all my movies, music, ext documents on my hard drive with my important homework. The reason why I did was reset my mac, then return all my old documents, photos ext, back to their place of origin. I have managed to do and frees a lot of space. A few days after my MacBook fell asleep with a connected external hard drive and now the hard drive is no longer present on the desktop or in finder. I am able to find in my "disk utility" , but for some reason, it shows the hard drive passed out faded gray and full? I tried to hook up with different cables and on the various devices as well. Also sang the first aid option in "disk utility" with no other results. I have contacted apple support and found out it was the external hard drive with the problem, so they couldn't help me. They then redirected me to Seagate Support, and I had already tried the methods they gave me (see list above). I was wondering if anyone here on communities of Apple has experienced the same problem as me, it would be that much appreciated advice you may have. I have important files that I need to recover.

  Help, please!

  Had a similar problem with external hard drive WD also on model MBA early 2015. Found if I disconnect the external hard drive restart MBA and then reconnect the external hard drive it was working normally again.

  Another thing I tried was still unplug HD plugin MBA on sector and re - a SMC.

• Since I downloaded El Capitan I think I can't paste it into my external hard drive.  I use to download my card reader, copy it, and then download to a new folder on the external drive.  It will not work now and nor can I create new folders on the hard dr

  I used to download pictures from a card reader, copy them, and then stick it on my external hard drive.  Since El Capitan of download, it does not work - I can download and copy, but can not stick to the external hard drive.  I can't set up the files on the external hard drive either.  However, I can download what is already on the external hard drive without any problem.

  How the external drive is formatted?

• Starting from installation, recovery - on - external hard drive

  Computer: Gateway MD2614u laptop, AMD Turion X 2 64-bit processor, designed for Windows Vista

  External hard drive: WD My Book Essentials (surrounded by Western Digital 500 GB drive external hard)

  Background: laptop was dropped, crushed physically the internal hard drive, all other aspects of the laptop appear to be in working condition.

  Vista says: Windows Setup cannot install another USB or IEEE 1394 device.

  It is important to note that the external drive is a SATA.  ALSO that there is NO hard drive internal to the computer right now.

  I pulled the drive from its casing and place in my desktop computer.  I have installed Vista in this way, and placed the disc in its case, confident, would solve the problem.  "The found operating system"

  I wiped the drive and tried again, this time using my Windows 7 to format the drive make a primary partition active and used the WD SmartWare to disable the password on the external, as well as VCD (Virtual CD, which contains the software for backup on and retrieve the external hard drive) on the outside.  Then installed Vista back once again, the drive in the enclosure, and again, I got 'the operating system not found '.

  I tried to use the "gateway recovery disc" the computer asked me to do immediately after I ran it the first time.  They have installed the Vista gateway on the external hard drive without any problem, the recovery software has taught me that I had to press OK to restart the computer, but again once 'the operating system not found"happens.  I advanced and rebooted the computer out of habit and that the computer starts in what concerns the loading of "microsoft" bar (the green bar moving left to right while loading vista), and then it restarted itself.  This new responsible for the 'green bar' and restarted again.

  3 times I let him, then I placed the regular 64 bit Vista disc in the status bar and try a startup repair.  "Windows cannot resolve the problem, do you want to send the information to Microsoft" or something that nearby.

  I then tried using the disk for 32-bit Vista in the same way.

  32 bit Vista disc completed the repair, but now the 'green bar' vista loading screen comes up, runs for a few seconds, and then I get a quick flash of a blue screen, and until I can see what he says, the computer restarts.

  Help!

  Hello

  This seems to be a hardware problem, so you may have to contact the manufacturer, follow the link given below to communicate with the gateway.

  http://support.gateway.com/support/default.aspx

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access DENIED to VIEW, COPY or MOVE photos on an external hard drive

  Access DENIED to VIEW, COPY or MOVE photos on an external hard drive
  
  Im having problems accessing copy, editing and viewing my photos on my external hard drive, it says I do not have the appropriate permissions to access to the file .and the file belongs to an unknown user account, I am using an administrator account, how can I have access to these files?

  THE problem started since I have been using windows 7, now I am using windows 8, the problem is still there!

  Please help me, its been two years im trying to solve this problem.

  Here is the link to additional photos showing all the problems

  https://www.Facebook.com/media/set/?set=a.3381541016883.2168211.1220177281&type=1&l=160799ee13

  IM using HP530, 2g of RAM, windows 8

  the external hard drive is a samsung HD103SI, 1 TB model

  You must enter the property of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Images-links - folder in external hard drive

  Hi, I m a basic Indesign user and I have a problem with the images.

  "When I create a new document or a book, I always create a folder to put the «.indd/.indb file" and create a subfolder named "images". (I m using an external hard drive)

  My problem occurs whenever I have to change the computer I'm working on. (usually I use a laptop computer and another computer sometimes). When I change the computer, the "drive letter" changes too, as "E:\MyBook\" goes to "F:\MyBook" break all the links in my images.

  My question is. West somehow configure Indesign (or just the document) to recognize all of the 'main' folder when creating links? Like '< all > \MyBook\Images?

  Thank you.

  If the links folder is in the same way as the ID file, it should automatically find the links, so copy the links folder to the drive pahrd and the file ID (bad idea to work on a file that is stored on a flash drive).

• External hard drive has problem by being recognized from my Win7 desktop PC. How can I fix?

  Hi This is the first time I post something, but I always read your thread, which helped me a lot!

  Now I'm having a problem and I can not find answers: C

  I use a desktop PC

  • Windows 7 Home Premium
  • Service Pack 1
  • 5.1 index of Windows performance
  • Processor: Intel Core i5-2300 @ 2.80 GHz 2.80 GHz CPU
  • 8.00 GB OF RAM
  • System: 64-bit

  And I'm having a problem with an external hard drive, Toshiba Stor.E Canvio 3 TB USB3

  Specifics:

  • Brand: Toshiba
  • Model: HDWC130EK3J1
  • Capacity of 3 TB
  • External interface: USB 3.0 (compatible USB 2.0)
  • Power:
    • Power AC adapter cable.
    • Input: 100-240V, 650mA
    • Output: 12V - 2A
    • Head of exchangable taken EU/UK
  • Compatibility: PC & Mac
  • System: NTFS (MS Windows) * the disk can be formatted the system filesystem HFS + for Mac compatibility.
  • Requires:
    • Windows® XP / VISTA® / Windows® 7
    • With 750 MHz or faster CPU
    • 10 MB of disk space system hard
    • 256 MB of system memory
    • a USB 3.0 or USB 2.0 port

  HERE, WHAT IS HAPPENING TO ME:

  I turn off the pc and I keep the hard drive is connected.

  I start windows. No problems so far.

  I open windows Documents, I want access to my hard drive, and first of all, she has another name, not the one I gave to her when I formatted, it (like two weeks there are other problems, but that's another story) and when I click on it an error message appears saying that my local drive has been damaged and cannot be opened and is necessary for formatting.

  I tried to unplug it after the shutdown of the PC (when the PC is on I can't unplug it because that always seem to be used, even if everything is closed) because I thought that during the start-up in somewhere so it might be confused with a drive of the computer, for three days, he stopped to do today after I plugged it again.

  I unplugged and plugged a different device, you see correctly, so I unplugged and re-connected to my PC, now we see normally.

  I'm ok with this, but I am aware that it is not normal behavior, what should I do?

  Thank you

  Since the watch test failed, the hard drive must be replaced. If it is under warranty, you can take it to the Toshiba service center to get it replaced. Another thing, the new hard drive is the recommended option.

  Before in both cases, make sure that you back up all of your important and personal data from the hard drive.

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• ITunes - problems with burning discs on external hard drive

  Hello

  I get error messages when I try to burn CDs on iTunes - corrects not allowed to perform. My iTunes media storage is related to an external hard drive - without preferences iTunes n. I changed permissions Read rights and write on iTunes via the Finder as suggested by a number of help pages - her has not resolved the problem. It is interesting when I change storage media iTunes to the default location on the hard drive - I can then burn discs. But as I hear it all accesed by iTunes data stored on external disk - this isn't a solution. Can anyone help?

  How externally is formatted? the last time that I answered this problem 2 days ago the person was externally formatted in NTFS and it must be Mac.

• Problems with El Capitan w / WD external hard drive

  I have trouble with El Capitan find the external hard drive. I put a couple of external hard drive in both my mac mini.

  OS X El Capitan

  10.11.3 version

  Mac mini (late 2014)

  Processor: 2.6 GHz Cose i5

  My external 2 TB USB drive working

  My not-so-working external WD My Book

  • FireWire 800
  • FireWire 400
  • USB 2.0

  It was before mini mac OS El Capitan. But lately, my mac mini showed that the WD My Book was read-only. Then, the WD hard drive disappeared from my finder! Same with Disk Doctor app.

  What format is the external drive in?

  If you have used NTFS before OS X El Capitan your third-party NTFS software will need to be updated.  OS X can natively read NTFS volumes, but the third party software is necessary to allow write access.

  If your player is in HFS +, then it could be a permissions problem.

• External hard drive problems Y560p

  I have an Ideapad Y560p and my laptop does not seem to read large usb 2.5 ", external hard drives. I am trying to use a 500 GB and the disk turns but does not entirely and open in Windows. The external hard drive works on another laptop.
  Two computers use Windows 7.

  (Sometimes), I can access my 320 ext hdd, but this player also has problems. I also have a "TTO Tray" error that appears often, and these problems may be related.

  Any ideas on how I can solve these problems?

  Hi Zehn,

  Yes, I tried a cable in there, but the power supply doesn't seem to be the issue.

  I COULD have solved the problem. I found the disc in my device manager and it has been disabled. I tried to activate the device, but I got an error code 22, and I needed to remove the device. When I plugged it in the drivers have been reinstalled, and it seems to be good for now.

  Thanks for the suggestion!

• Seagate FreeAgent GoFlex USB external hard drive problem

  I have a Seagate USB external hard drive. It is loaded with all my pictures and music. I can not open. I did in the past without problem.  It is a Seagate FreeAgent GoFlex. It says that I have the drivers updated. I've started and restarted. uninstalled and installed etc. It's also almost if there is nothing on the disc. When I plug it into the USB port it will not appear in the my computer tab, however, it shows in the toolbar at the bottom as installed but with nothing on it. When I run the troubleshooter, it says that the problem can not be detected, but it also says that the device is functioning properly. I do not know because I can not the specifics to fill. Y at - it somewhere that I can take this drive to see if someone can see if my files are always about this and that so they can transfer to another drive? Help, please!

  [Moved from comments]

  Hi Philippe,.

  Welcome to the Microsoft Community and thank you for the post about it

  It seems that when you connect an external hard drive Seagate USB to your computer, there is no indication in the drive. I appreciate the action that you tried to solve the problem.

  I would like to know the following information.

  (1) what version of Windows is currently installed on your computer?
  (2) have you tried to connect the hard drive to other USB ports?
  (3) you are able to use other USB devices?

  I suggest you to connect the hard drive to another computer and check.

  Your answers are important to us, please write to us with the requested information so that we can help more.

• Since the update of Vista on my external hard drive problems

  I have a problem with my external hard drive. A week ago I reinstalled Windows Vista Home Premium on my PC. Everything worked very well, my external hard drive, too. But after installing all the new updates and SP2 my external hard drive has problems. If I copy something from her, or just listen to the music is recorded on it, so overall if I work with her, after 1 to 3 minutes it stops working. I have to sign in to get access to it again. But before installing SP2 updates after SP2 everything worked out very well. So I think that there is a problem with SP2 or the following updates. My Pc is a Dell Dimension 9200 and the external hard drive is a Verbatim 1 TB external hard drive and USB 2.0

  I tried to bbot with Ubuntu and delete the Autorun.inf. Now everything works fine again.
  Thank you

• Windows stopped Toshiba Canvio external hard drive because it has reported problems (code 43 error)

  This ext drive works on a notebook of friends (windows 7) and works also on the desktop (windows XP) but work on that notebook (windows xp). I realized problems as recommended by a number of times.  Problem remains.

  Hello

  -What diagnosis made?

  One of the motors controlling the unit does not work.

  First, run the troubleshooting material the Article from Microsoft fixit.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Failure to fix, then uninstall and reinstall the device drivers.

  1. Click on Start then RUN and type Devmgmt.msc in the RUN box.
  2. Click disk drives in the list of hardware
  3. Click on the USB external hard drive with the question and click Uninstall.
  4. Once the hard drive is uninstalled, disconnect the USB cable.
  5. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  6. Search the external hard drive in Windows Explorer

  You can view the documentation for the hardware for more information about diagnosing the problem

  For reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.