HP Inspiron One: Felt transfer on fabric with an Officejet from HP e-all-in-one printer 6700 Premium

I just bought on transfer fabric sheets, the instructions say select MEDIA: iron on T-Shirt transfer, printing: Norman or even better. However, I don't see any of these options when I click on the Properties tab. Also how do I print mirror image? Thank you

I found a thread in the Adobe community, that I think might help. Please take a look at some suggestions here: How to reverse a photo, (mirror image).

It seems that these steps are not necessary:

Click on the Image at the top, then rotate, then click on back layer horizontally

If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos and if it helps to find a solution, please click on the button "Accept as Solution" down below in this message.

Spoiler (Highlight to read)

Tags: HP Printers

Similar Questions

  • Recent problem with very slow internet browsing on all browsers Windows Vista Home Premium 32 bit

    Separated from this thread.

    Hi all I'm having the same issues as Theresa in the thread above split. I have Vista Home Premium 32 bit service Pack 2 with all the installed updates (automatically done!).  Within 3 months, this PC at home that was formerly an excellent navigation device became very slow when you browse using IE, Firefox or Chrome. It takes 30 to 50 seconds to load any web page (Yahoo, eBay, etc.). I followed all the instructions suggested to Theresa in SafeMode by Bill Smithers. Resulted in nothing other than a few cookies and Wetherbug I killed. I also run McAfee total protection and Spybot S & D every 3 days with nothing found.

    I have reset my browsers to the specifications of the factory without change.

    Comcast is my internet provider high speed and my speedtest returns 65 - 75 MB/s download and 11 Mbit/s upload very regularly. I connect directly to the bridge. I had Comcast out and they swapped unity Arris of a unit of Cisco beefier but that changes nothing. Other devices on my network domestic perform very well and do not have this problem.

    When I browse a site the CPU spikes up to 88% use in 45 seconds and is stable at 50% usage 1.7 GB memory.

    The only thing I can infer is at this time that something happened to the operating system during automatic updates or some other setting has been changed.  I could use any help or suggestions you may have! Otherwise, I love this OS and have not had any problems. Thanks, Dhoffa

    Tune Up

    Internet Explorer

     

    To improve performance for IE, you can reset internet Explorer to the factory settings. This will disable memory addons chewing and bar tools, etc. that you've installed over time.

    In Internet Explorer click on Tools in the bar and then Internet Optionscommand. Go to the Advanced tab, and then click the Reset button.
     
     
    Or disable/remove specific ones, in Internet Explorer click on Tools for button on the command bar - Manage the Addons - enable or disable Addons - select the addin - Remove or disable the button.
     
     
    There's a Fixit
     

    Troubleshoot Internet Explorer to IE quick, safe and stable

    http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

     

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

     
    Other memory hogs
     
     
    You probably many useless auto startup programs. You can disable these programs.
     
     
    Click Start - all programs - Accessories - run and type
     
    msconfig
    
     
    Then go to the Startup tab uncheck the things you don't need.
     
    Use the command line column to find info on the file, if it does not use display menu - Select the columnsdisplay. Use the name of the folder that contains the file and right click - Properties - Details tab to see what it is.
     

    Explorer

    Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

     
    • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    • Close the windows explore
    • Start Autoruns by right-clicking and choose Run as administrator
    • Click on the Options menu - entries and Filter Options to hide Microsoft tick and clear to understand empty slots
    • Go to the explore tab and uncheck everything to the left.
    • Reset
     

    Difficulty of the Windows system to the performance issues on Windows computers slow Fixit

    Automatically troubleshoot and fix problems of Windows performance. Enhance, optimize and speed up Windows computers and make slow PC faster.
     

    http://support.Microsoft.com/mats/slow_windows_performance/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    --

  • I have a HP All In One Printer 6700 and when I scan a photo that some of it appears on my MacBook.

    This is a photo 8 x 10 and no matter what I do, only a quarter of it appears on my computer.  I am incredibly stupid feeling right now and don't know what to do to solve this problem.  Any advice?  Thank you!

    Hello
    The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

    1 open the HP utility and select your device.
    2. based on Scan Settings open the "Scan to Computer".
    3. click on the tab "scan tasks.
    4. Select the shortcut Scan allows to analyze, and then click on edit.
    5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
    6. in the expanded menu now, open the drop down next to cultures in and set as none.
    7. click OK and try to scan.

    Kind regards
    Shlomi

  • HP Officejet printer, 6700 Premium e-All-in-One - H711n

    I just installed a new printer of 6700.  Everything seems to work, but how do I turn off the ringer when my phone rings?

    Hi Pappy80

    You can change the tone of the fax as follows

    Adjust the sound volume of fax
    This procedure allows to increase or decrease the volume of the sounds Telec.
    To adjust the sound volume of fax
    1. Press (right arrow) and then press Setup.
    2. press on the configuration of the fax and then touch basic Fax settings.
    3. Fax the Volume button.
    4. press to choose soft, Loud, or off.

    or you can download the user guide from the following link for more help:

    http://h10032.www1.HP.com/CTG/manual/c03227497.PDF

    I am an employee of HP

    Please click on the star of congratulations in my post, if I helped you
    has solved your problem, please click on accept as Solution to help others. Thks.

  • Dell inspiron one a HDMI input with output usb audio

    Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

    So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

    If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

    Thanks in advance.

    Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

  • Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

    I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

    Dell is not win7 driver/software for this model, later are for 32-bit vista

  • Dell Inspiron 530sand by Kodak ESP5 all-in One Printer not detected in Windows Vista.

    Original title: cannot find the printer

    I have a s 530 Dell Inspiron and a Kodak ESP5 All in One Printer. The problem began earlier this year when attempts to print failed because of "jobs in"

    the pipeline "or something.  No matter what I did the same blocking returned.  I emailed Kodak and they spent ages uninstall/re-installing the

    software all for nothing helps.  Then I tried the automated Microsoft Fix it Center but I got nowhere so eventually abandoned.  Now I need the printer again only

    This time, I can't find any sign of it on the computer.  The icon at the bottom right has disappeared and when I bring to the top of the order page and click

    Printers, an empty box appears.  The usb cable has been replaced and tried other usb ports.  Nothing.  I tried the Fix it Center again and if

    anyone from Microsoft read this, was sent around in circles.  By clicking "Run" tells me there is a temporary outage preventing the Printer Wizard

    operating for two weeks?  And try to communicate with the web home page has a similar result, I like my email address is registered, but when I use it

    told me to use another, who is also rejected because the first is already registered. All this may be my fault I'm semi illiterate computerwise

    If no one can say why won't the computer to the printer, I would be very grateful and more if the answer was in terms laymans

    My thanks in advance

    Peter

    Hi Peter,.

    Thanks for posting this question in the Microsoft Community.

    I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

    To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

    1. you have any security program installed in the computer?

    2 what Microsoft FIXIT did you use exactly?

    I suggest you to install the drivers for the printer and check if it helps.

    You can also go through the steps in the article and check.

    Hope this helps and let us know if you need more assistance. We will be happy to help you.

  • Inspiron One 2020 new card mother help

    Greetings & Salmenella

    The high memory slot on the motherboard of my Inspiron One 2020 beeps stop known, two beeps of intervals. Any memory I put in the continuous ringing. It stops if I have a memory stick into the lower slot.

    I need help on the verification of the correct mother card to purchase or if it is a card mother Dell different that I can spend which will enter in the box. I don't mind if I have to make the cuts or small holes in the back plate, since I already have the holes for a tuner card, I bought after that I bought the model which had no openings for cable TV.

    I really don't want to go buy a brand new for a slot with memory 4meg bad computer. I have a solid state, 8 GB RAM and 2 GB of RAM, it runs fast enough that I do not have to buy a new computer. But losing that 4gigs of ram in the bad memory slot. Holy Ding Dong, the hard drive takes forever to stop making noise, surfing slows down and compilation and writing of visual basic for class takes forever.

    Now for the short version.

    What is the correct motherboard model to replace an Inspiron One 2020 or is there a model of mark liked that a motherboard will suit my AIO home and get all my guts of the computer. I have a 5-2390T UC iCore.

    Love,

    Stu

    Any advice for this model are the same - but nothing else that will fit the original.

    www.amazon.com/.../B00I9OQQ7U

  • Inspiron One 2320 inaccessible AIO, Windows 10 boot device error,

    I have a Dell All In One 2320. When I tried to install windows 10 throughout the system has stopped working. It is now gives me an error of Inaccessible Boot device. what I can do. It worked fine on windows 7.

    Crackers Holy, how horrible a response. Reference Dell... is this seriously the best you can do?

    Devaux, go here, this is a thread on the support site for Microsoft with a lot of information on how to recover your system and get 10 Windows installed: http://bit.ly/1IkgMgU

    Good luck! I have an Inspiron One 2320 also and I do research on potential problems until I update it.

  • Cannot read DVD on Inspiron One 2330

    I bought an Inspiron One 2330 in December and just tried to play a DVD without success.  If I put on a CD with pictures, it does not come to the top, but I can access all the photos if I open the file, but the CD does not come up on top of the office.

    I called the support Office and was informed that there is a software problem on a brand new computer.  Anyone know how I can fix the problem of grubbing-up of DVD on this computer?

    Okay, that's good. At least the drive works. Just need to understand why it will not play.

    What you need to do, is tell Windows what application plays your DVD movies. Click here for an explanation of how to set AutoPlay in Windows 8 options. When you get to the AutoPlay window, next to movies on DVD, you must select your DVD program. It could be something like PowerDVD.

    If you do not find a program to play DVDs on your computer, you can always try VLC Media Player (free). Works fine on Windows 8.

  • Dell Inspiron One HDMI question

    I have an Inspiron One 2320.  I tried to connect a TV as a second monitor.  To my surprise, the computer's HDMI port is a HDMI input port.  Am I reading correctly?  Can someone please help me and confirm that I can't use the HDMI port to connect to the TV?

    If it is in fact a HDMI input, what is - this really for?  What devices that require an HDMI port to send the signal to the computer.

    I am so confuse with it, and why even do a HDMI input and not a HDMI output?

    Thanks in advance

    I have an Inspiron One 2330 Touch.

    Other features include an HDMI port... A HDMI-IN port. It would be something like a Blu - Ray player, cable box or DVR amp HDMI out, Tablet... something like that... like the Inspiron is a simple monitor or HDTV.

    I was also surprised that the video output was only a VGA 15 pins. Maybe the next model will have a DVI output. At least this way, either natively or with a converter inexpensive... you can drive DVI, VGA or HDMI even (with no sound). DisplayPort is a versatile alternative.

    In your case... If your template does not output a VGA (or your second monitor is not a VGA input)... you should be able to get a "USB video card.

  • Inspiron One 2320 - factory restore / recovery outcome

    Hello

    I bought the Inspiron One last year which has Windows 7 Professional pre-installed on it.

    In my infinite wisdom, I decided to make a room upgrade to Windows 8.

    My wife don't like Windows 8 and want to return to Windows 7 Pro.

    The problem rears its ugly head when I go in the troubleshooting section > Advanced Options > System Image recovery

    I get the report that there is system image.

    Windows 8 wiped my hard drive factory backup image?

    I'm counting on you my fellow COMPUTER geeks for the answer!

    Help

    Andrew

    Hi André,.

    I understand that Windows 8 is a relatively new OS and might take a while to become familiar with. However, if you encounter problems using Windows 8, you can refer to the Windows 8 here for general support 'how to' articles of use page.

    As you have upgraded to Windows 8, the recovery partition has been lost and you would not be able to go back to Windows 7 via the Image recovery. However, if you have created a recovery media factory at the time of the system configuration, you may be able to restore the system to factory settings using this media.

    If you have not created a recovery media, the only way to get back to Windows 7 is to re - install the operating system using reinstallation disks.

    Answer please if you have any other questions.

  • For Inspiron One 23 wireless speakers?

    I have the Inspiron One 2350 ('Inspiron One 23"on Dell.com).  I am looking to upgrade the low volume instead, tinny speakers on a machine also very nice.  I have my eyes on Dell Wireless Speaker System AC411, but the product page has a list of "compatibility" which does not include my new system.  Is there a reason why this Bluetooth speaker system would not work with my Inspiron One 2350?

    This product is compatible with the following systems:

    Inspiron 14z (5423)
    Inspiron 15z (5523)
    Inspiron 660
    Inspiron s 660
    Inspiron One 20 (2020)
    Inspiron One 23 (2330)
    XPS 13
    XPS 14 (L421X)
    XPS 15 (L521X)
    XPS One 27 (2720)

    Hi Michael_T,

    I have the 2330 and 2350. There is little difference, but you'll be sure of using bluetooth to 2330 on your 2350.

  • A Dell Inspiron 531 computer will be compatible with Windows 7? Conflicting information between sources.

    I looked on these contradictory information, and here's what I found... I'm still not sure about that.
    I found information about this Dell Inspiron 531 computergoing to be compatible with Windows 7 on the site of Microsoft and in the control panel of that computer system information.
     
    But then I found more information on the Dell website that indicates otherwise.
     
    Please follow me closely here, it took some time to compile this info.
     
    Allows first eliminate what would be the simplest solution I already tried, that would be the "Windows 7 Upgrade Advisor" located at this address: http://Windows.Microsoft.com/UpgradeAdvisor
     
    On this Web page, there is a small program to download and install that is supposed to tell me if this computer is compatible with Windows 7 in processor speed, RAM, graphics card, etc. and devices, automatically... Unfortunately, it does not work... I installed it and it stopped with the message: "Windows 7 advisor stopped working" so that program and this option is unnecessary.
     
     
    It is the "Windows 7 system requirements" list of information... it shows that I need at least a 1 GHZ processor or faster, 32-bit... This Inspiron 531 has a 2 GHZ processor and is 32-bit. This page is says I need 1 GB of RAM... it has 1 GB of RAM. It says I need 16 GB of available disk space, it has a C 138 GB primary hard drive which will be deleted when Windows 7 is ready to be installed. And he said that I need a"Graphics card DirectX 9 (with WDDM1.0 or higher driver)" ... the last part in parentheses is the only part that I'm not sure, but my system via the control panel information shows most of this information as being adequate.
     
    Go to this URL: http://support.dell.com/support/edocs/systems/inspd531/en/OM/appendix.htm#wp1149549 to see the Dell Inspiron 531 annex page online and click on the link above titled, 'Specifications' or just scroll to see... there in the category 4th down titled 'Video', it shows the "video integrated Nvidia (DirectX 9.0 Shader Model 3.9 Graphics Processing Unit) '. This seems to correspond to the above listed"DirectX 9" info page "Windows 7 system requirements".
       
    But then there are 2 pages Web of Dell, which indicate that this Dell Inspiron 531 is only supported by Windows Vista and Windows XP... see this URL for this Web page... http://support.dell.com/support/topics/global.aspx/support/osmatrix/index?c=us&cs=19&l=en&s=dhs& ~ ck = mn  
     
     
    It shows, once you scroll down just a bit, a list of the current Dell computers that can support Windows 7... the Inspiron 531 is not on this list.
    This list excludes the Inspiron 531, but it then says' does not have a computer on these lists? Click here to shop for a new Dell! » .. .bad grammar side, this line that I'm pointing out may just be trying to sell me a new Dell computer, if I actually need or not Dell
    !
     
    And finally my info the computer from the control panel shows aprocessor 2 GHZ, 1 GB of RAM or 958 MB anyway and the 32 bit OS.
     
    And Yes, I ran the built-in diagnostic test Dell PSA on this computer and when it tests the sound card and the speakers, he plays the song a bit in each channel and then on both channels, so I know that the material is good on this computer.
    I know it's a lot to go through... it took me a while to compile this info, and I sent a version of this letter with screenshots and other MS Tech in India who I worked with for a month on the phone and email to correct a problem of 'no sound' that simply cannot be beat.
    But I'm trying to make sure before I do a clean install of Windows 7, when the disc arrives here, I don't clean it hard drive alone to experience Windows 7 does not work on this machine.
    Actually, I'm a Mac user and I don't have much trouble in those... Just trying to fix the computer of my mother for it, and now it seems that trying to install Windows 7 is the only way to get the sound back so that my mom can enjoy some music again.
    I never thought that I would like to know as well on the PC troubleshooting I've learned in the last month, but I don't like, and there is still no sound on this computer and everything has been tried... I made a collage of a hundred different error messages from Windows that I think I'll put it up for bid on ebay... I just want to go home to my trusty Macs.
     
    Please give me your comments... I would of course welcome.
    Thank you
    NuMetro

    I am happy that you have it installed, but you have sound?

    I was too surprised when Windows 7 to install all my drivers in device for me!

    The video driver that it wanted to install was even later that of Nvidia. Also, it does not have the driver Physx I needed, so I had to install one myself. The other driver, that he has not installed was the pilot for the X - Fi card. He did install my motherboard if chipset drivers, but I turned around and installed ones that came with my motherboard.

    Windows 7 does a better job to settle on earlier versions of Windows, but do not watch install what he wants to make sure that it does not have something that you don't want. He came along and updated my video driver again, but when that happens, it installs just the driver itself and not the driver Physx and my video control panel. Now when he talks about video drivers, I just go to Nvidia and download the full set.

    You have the option in there for Windows Update to select which updates you want to allow. I would have put to allow you to decide which ones you want and do not let do it on his own.

    I'm glad you're a happy camper! I do not see where you come with Vista, I jumped on this operating system completely because of the horror stories I've heard.

  • His use of the AIO Inspiron One HDMI input jack 2330?

    Greetings,

    I'm looking at the computer Inspiron One of AIO 2330 with the Core i5 processor. I understand that this computer comes with an HDMI port

    I can't seem to find information on what I could use this port for so I was wondering if someone could enlighten me. Specifically, I was hoping that he could've able to do the following. My TV provider digital tuner box using HDMI to connect to the TV. I was wondering if I would be able to snag one of the digital tuner until the HDMI in port on the computer and use it as a monitor for the tuner box?

    Thank you

    Gord

    Hey, Gord

    Yes, you should be able to do. Let me mention that I did on a XPS One 2720 system and the video was nice connecting the my set - top box HDMI signal. However, the audio did not work. In theory the HDMI can carry video and audio signals, so I don't know what the problem was. But the video part worked fine.

Maybe you are looking for

  • Satellite X 305-Vista hangs

    Hi all. Vista crashes after it does an update. Disks of Vista, I decided, after the time before having to restart my operating with my recovery system can GAGF.I returned to XP but can't get anything going or find the correct drivers and I do not kno

  • 5530 want: Instant subscription of replacement printer ink

    HP sent me a replacement rather than repair printer.  I can't access now myInstant ink cartridges I used with the original printer.  How can I change that, I can end any information online and it's hard to make it sound between 9 and 6.

  • Satellite A200-1HU: how to get back on my touchpad scrolling

    Initially when I had my A200-1HU I could use the right side of the touchpad to scroll. I now can not do. I can't find in all cases to remedy this, there is a logo in the systray, saying: device pointing synaptics but when I click it, I need to point

  • No connectivity with Z5 Premium LTE network

    Hi... Please help. I have a Sony Z5 Premium as a Christmas gift from Hong Kong.  The phone is unlocked and he worked in Hong KONG; However, when I bring it back to the Canada and has obtained on the Rogers network, I can't to get LTE connectivity (or

  • Visioneer 4400 does not work in Windows 8.

    If someone was able to get a Visioneer 4400 scanner to work on Windows 8? If so, please explain the process. I downloaded and installed the latest drivers, but no luck. Visioneer web site says it's a model of 'end of life', so I guess that means that