His use of the AIO Inspiron One HDMI input jack 2330?

Similar Questions

• Dell Inspiron One HDMI question

  I have an Inspiron One 2320.  I tried to connect a TV as a second monitor.  To my surprise, the computer's HDMI port is a HDMI input port.  Am I reading correctly?  Can someone please help me and confirm that I can't use the HDMI port to connect to the TV?

  If it is in fact a HDMI input, what is - this really for?  What devices that require an HDMI port to send the signal to the computer.

  I am so confuse with it, and why even do a HDMI input and not a HDMI output?

  Thanks in advance

  I have an Inspiron One 2330 Touch.

  Other features include an HDMI port... A HDMI-IN port. It would be something like a Blu - Ray player, cable box or DVR amp HDMI out, Tablet... something like that... like the Inspiron is a simple monitor or HDTV.

  I was also surprised that the video output was only a VGA 15 pins. Maybe the next model will have a DVI output. At least this way, either natively or with a converter inexpensive... you can drive DVI, VGA or HDMI even (with no sound). DisplayPort is a versatile alternative.

  In your case... If your template does not output a VGA (or your second monitor is not a VGA input)... you should be able to get a "USB video card.

• OfficeJet 4630: 4630 can print grayscale using only the black cartridge?

  I have purchased a printer 4630 and want to use it like I did my old PSC1350 - using only the black cartridge for all printing. I can't find any setting of grey for the 4630 that will allow for this. With the 1350, the grayscale setting would prevent any color ink cartridges is used, an unnecessary expense for printing in black on white paper.

  If there is no setting on the 4630 grey scale, can I be sure that black ink is used only for printing without color?

  Hello @clif9710!
  
  Thanks for posting on the HP Forums!

  Your printer Officejet 4630 should be able to print in gray scale and the options should be in the window of the printer printing preferences.  I was able to locate a document regarding the changing settings in windows 7 print.

  If you do not get the options to print in gray scale you will need to uninstall the HP software, including the old software, restart the computer and re-install the HP Officejet 4630 software again.

  To uninstall the software HP click here: uninstall the HP software

  To download the HP software, click here: driver and software Officejet 4630

  Another good thing about the Officejet 4630 is that it allows to print mode single cartridge.  cartridges for your printer built in print heads which means that it requires no 2 print cartridges.  If you never use the Tricolor cartridge or you are planning on printing in black, you can remove the Tricolor cartridge, put the cap of the cartridge down and close the lid.  The printer should now say "mode single cartridge printing.  Once the printer is closed upwards, you can send your print job and it will print using only the black cartridge one!

  Thanks again for posting on the forums of HP and post back and let me know how it goes!

• Dell Inspiron One for HD editing

  Hello

  I've only recently begun to edit our HD movies. So far, my low spec Dell took to editing DVD quality, but unfortunately it cannot process the HD, I'm looking to upgrade.

  Could give you please your advice and opinion on the appropriateness of the Dell Inspiron One 23, will be properly designed to handle HD video editing in first Pro CS5? (My main concerns and because of the video card.)

  http://www.Dell.com/UK/p/Inspiron-one-2310-Intel/PD.aspx?c=UK & CS = ukdhs1 & l = in & s = DHS & ~ CK = mn

  Intel Core i5

  Windows 7

  6 GB of ram

  1 TB harddrive

  ATI® Mobility Radeon HD 5470 1 GB graphics card

  Thank you very much for your time and your answers.

  Hendo

  All the typical games machines. Look at least the i7-930 +, 12 GB memory, disks SATA 3 x 7200 RPM and a GTX 460 + video card.

• The iMac has a digital input?

  Hello

  I searched for centuries for the answer to what I thought was a simple question - the iMac has one digital input (optical or other)?

  I know that the headphone port doubles as an analog audio to as well as an optical digital output, but this port also accepts input optical? If not, is it possible to enter a digital signal via a USB port?

  I have an iMac (20-inch, mid 2007).

  Thanks to all who can help.

  AL

  Yes exit usb audio and are truly comprehensive external soundcards, they can have any type of entry and exit of the machine to be desired that they have

  and if they do a driver of OS x for him it's just a matter of connection installing the driver and choosing the entry in system preferences for being that

  https://Flipboard.com/@mariahlolas/top-10-best-USB-external-sound-card-adapters-for-Windows-and-Mac-2016-2017-npa5lltvz

  If the audio minijack that also take in charge the headset for iPhone I believe support the digital input and I don't know if

• Inspiron One 23 (2330) left the port rear HDMI is Indiana only, not RELEASED

  Hello everyone. I have a Dell inspiron all-in-one with Windows 8.1 2330. I want to connect a LG monitor via an hdmi cable, but it does not recognize. I am sure that the problem is the device of Dell, as with other devices, the connection works.

  The Inspiron One 23 (2330) left rear HDMI port is IN , not OUT. It is designed so that you can connect an external device such as a video camera and display the camera image on the screen of the Inspiron One 23 (2330). You will need to connect an external monitor to the Inspiron One 23 (2330) VGA port on the right rear.

  

• cannot use the webcam or play dvd Windows Inspiron ONE 2320 8.1

  Hello.

  When I open My Webcam Central on my Inspiron One 2320, I get a nice message on the right hand bottom corner 'not supported Webcam. Hmmmmm. When I try to play a DVD, no luck.

  I use Windows 8.1

  I went into the Manager.Under Imaging device, there is no sign of a driver for the webcam.

  In the section DVD, States of CD-ROM/DVD-ROM HL - DT ST DVDRWBDCT40 N does not properly. When I right click to update him pilot-still no worky.

  Thank you for your help!

  Nora

  The webcam is already installed. Central webcam is software and is also already installed. Look at the illustrations in the Quick Start Guide in the list of books below and see that the camera is located on the bezel at the top of the screen has a cover and light. Remove the cover to see if that helps. If you're still having problems, go to this site to help support more-

  www.Dell.com/.../manuals

• Use Inspiron One as monitor only?

  I have an Inspiron One now coming at the end of his life, and I ordered a new laptop (from dell, of course).

  My question is this: is there anyway I can use the excellent screen as a monitor for my laptop Inspiron?

  I have a docking station that will allow me to connect, but I don't know how to disable the "computer" part of the Inspiron know how to use the monitor without having to initialize until the entire Insplron One?

  Any suggestions please?

  Only if it has a port of entry HDMI for video, and even then it might not work. Your model has hdmi for video camera or any other device. It is not practical to use a $500 as an external monitor $ 100 computer. It will not start as a real monitor. You need to start one and the computer that you use and then switch to the external display and then put together a... a waste of time and energy. Test to see how it works or does not work.

  Buy another monitor.

• Dell inspiron one a HDMI input with output usb audio

  Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

  So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

  If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

  Thanks in advance.

  Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

• I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell desktop inspiron one 19

  I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell inspiron one 19 desktop... your help will be very appreciated thanks in advance!

  Here are the usual methods to solve this problem:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
  • Check your paper files (works only if you threw down the password somewhere)

  If none of these standard precautions work for you, then the remedy will be painful. Post again if this is the case.

• Replace the hard drive and OS re - install Inspiron One 2330

  Hello

  I had my all-in-one desktop Inspiron One 2330 for about 18 months.  I see serious problems with the hard disk, the system hangs, and the event log is full of HD playback errors.

  ePSA diagnosis shows code 200-0142 telling me to replace the hard drive.  The chkdsk utility runs and sometimes corrects problems and sometimes clean.  Such problems at low altitude, I'm surprised that I can start far enough away from launch internet explore and write this message.

  I called Dell support and they were kind enough kindness to send me the original floppy Windows 8.1 for the Inspiron 2330.  I have a disk hard solid state ready to install, and I saw a bunch of great videos from YouTube that explain how to open the case.  The HD swap is not a big deal, but I have a few basic questions.

  I know that many readers here know the answers.  Thanks in advance for help...

  1. If I install a blank HD in this installation media machine Dell recreates all of these crazy Dell partitions?  I have not of much use for them until I ran the diagnostic ePSA and it was extremely helpful.  I hope that you will tell me that if I do a fresh install, I get a new partition ePSA addition to 8.1 Windows on my replacement drive.

  2. I do not see why this machine won't support a SATA SSD SanDisk brand new instead the 1 TB hard drive that came with it.  Is it OK to use SSD drives in these Machines from Dell?

  3. have good links for the operating system Dell re - install procedure?  I will be installing Windows 8.1 on this drive.  Strangely I find no procedure to re - install step by step operating system.

  4. I have read that the activation key for Windows is now integrated into the motherboard of the machine somewhere.  Do I need to enter this key when I re-install?  I don't see all the stickers on my machine with the key.

  Thank you for your help,

  I finished the upgrade SSD in my Inspiron One 2330 with very little trouble.  Here are answers to the questions for those who find my post using original research.

  1. the Dell Windows 8 installation media disc does not any recovery disc partition, new, retail.  If you install fresh by booting from the DVD drive, you get a nice clean install of Windows 8 without any extras Dell.

  It seems that the diagnosis of ePSA is hosted on the motherboard of the system and not the hard drive.  I have had no trouble to boot in diagnostic mode to run tests of ePSA, even if I see any Dell diagnostic partitions.

  If you install fresh from Windows 8 media you definitely lose the Dell recovery partition.  No big loss.  It is a little strange to wait the software stored on the hard disk to help you recover problems with the same hard drive.  I'll just do another clean DVD media installation if this happens again.

  2. my SanDisk 256 Gb SSD is impressive.  It costs ~ $80 on Black Friday, and now my Dell Inspiron One 2330 boots in 9 seconds.  This is measured from fully powered down for the moment, I type my password to connect.  9 seconds - crazy fast.  Modernization of the best ever.

  3. my internet search found many useful message board posts, some web sites and blogs.  Unfortunately there is no official Dell Reinstall procedure that I could find.  The complete replacement of unplugging the power to see Windows 8 on the screen by using a new SSD was about 70 minutes.  I gathered the information I could find and guess the rest.  Worked for me.

  4 Windows 8 activation code is not necessary for a media of Dell Windows 8 re - install.  The installation process of Windows 8 should be reading the key out of the motherboard because I've never been invited to type one in.

  Here are a few other tidbits:

  5. the Dell Windows 8 media support I was sent by Dell wasn't Windows 8 and 8.1.  I spent more time pulling down of updates, restart and then installing Windows 8.1 on the app store that I did replace the hard drive.  Don't forget: some updates depend on other updates being present.  Really, you need to run the Windows update utility several times to get everything down.

  On the good side of things, my restarts are now long 9 seconds.  I have no problem whatsoever reset to any indication that the system needs to restart to complete the installation of an update.

  6. after obtaining my update to 8.1 Windows system, I installed all the latest drivers for the Inspiron One 2330, which could be downloaded from Dell.  This figure includes a BIOS update which has been a royal pain to apply.  To do this I had to create a start-up separated from 'BACK' USB key.  In fact, it is possible to create this rudimentary special boot using utilities downloaded from Dell drive.  Locate the "diagnostic Distribution Package (DDDP)".  Good luck with that.

  7 Dell backup and restore has been completely useless for the replacement of my SSD.  I have had two drives bootable USB thumb complete with full system backups, the backup restore and Dell refused to restore my data on my Virgin SSD drive.  The error message has complained that my new drive is too small.  It was laughable: my original hard drive was something like 95% of free space.

  8. There is a bonus in all this: by rebuilding your system using the original Windows 8 media, you get a nice fast machine without the excessive Dell bloat-ware.  I do miss the software pre-installed in all.  Glad to get rid of it in fact.

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?

  I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?

  Check in system preferences > Desk Top & screensaver:

  

  Ciao.

• 4th generation Apple tv remote keeps switching HDMI 2 if I have my surround sound Samsung anynet on which uses when the samsung TV is turned on. Currently I have away the skin until I found what I want to watch.

  Current configuration is a Samsung TV with a Samsung blu - ray surround sound.  When both are on they use anynet to communicate. Now with the new apple TV 4, any click on the apple TV remote will send my TV HDMI 2 (where the entourage of blu - ray is connected). How can I stop this? The apple TV is HDMI 3. The dressing must be on HDMI 2 which is also ARC (Audio return channel)

  Try to go in the settings of TV4 of Apple and the deactivation of the ability to control your receiver and your TV. This should disable HDMI CEC which resembles its conflict with Anynet.