HP laptop - 15-ay089tu: compatibility of the BONES of Kali in my HP laptop - 15-ay089tu

Similar Questions

• Quality/compatibility of the new hard drive for my laptop

  I have a toshiba satellite A105-S2194. I went online to get a replacement from the hard drive. The guy who I spoke to suggested that I get the data of 1 TB 2.5 5400 RPM. I asked if this was no exaggeration for my computer and if she would work with her. He assured me he would. I have windows 7 to load on this subject. My question is. It is true that he did and work in my laptop? It is with Fed - ex delivery and need to know whether to install or send back

  The SATA standard is so clearly defined that virtually any disk 2.5 "will work on a laptop. High speed drives (7200 RPM +) could draw in theory more current that might have been specified, even if the newer readers are more effective. With regard to the compatibility of the BIOS limitation of size should not enter up to 2 TB

  Even if the laptop is quite old it supports disks more large, Toshiba lists only readers that they mounted but Crucial list upgrades up to 1 TB.

• Can I repair the BONES using recovery without loss of important data CD?

  I have a problem with my laptop Satellite 1100. The windows OS is somewhat damaged and now won't start. I tried the usual 'use last good config' and boot into "safe mode" but none of these work.

  Is there a way using the product recovery CD to fix this without losing the photos and important documents?

  Any help appreciated.

  Hello

  Restore CD provided you can install new OS. There is no option for any type of repair of the BONE. I don't know how your disk is configured, but if you have 2 partitions, and all your important data is backed up to the second, you can install the OS on the first partition using Expert mode.

  Right now, you can try to get the facilities of Microsoft CD and try to repair the operating system preinstalled.

• Inspiron 7348 2-in-1 compatibility with the 16 GB modules

  Does anyone have information updated on the compatibility between the 16 GB (as the indispensable CT204864BF160B) simple modules and the laptop 7348 2-in-1? Mine has a 5th gen CPU i7-5500U and is already updated to the latest version of the BIOS A08 published yesterday.

  

  Being a 5th generation Broadwell Intel Core 2 CPU, I think. It is compatible. Its price fell a few days ago at the level of US $ 100, which makes a nice and relatively cheap upgrade.

• Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to force the lightroom Installer to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• Wouldn't be nice if we could see Apple TV compatibility in the App Store?

  Wouldn't be nice if we could see Apple TV compatibility in the App Store?

  TT2

  Leave comments for Apple to http://apple.com/feedback/appletv.html.

  Furthermore, Yes, that would be nice.

• How to get Firefox to check the compatibility of the addon first, then ask me if I want to continue the update of Firefox?

  How to get Firefox to check the compatibility of the add-on first, then ask me if I want to continue the update of Firefox? The update process currently only told me that an add-on has been disable after you apply the update to Firefox. Options > Advanced Options > switch to the update tab, "Warn me if this turns off one of my modules," doesn't seem to work.

  delores51

  This is an add-on that does this.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/is-it-compatible/

  More specifically, what modules are always appear as incompatible after a Firefox updated? Firefox 10, extensions that are made properly shouldn't be a problem, with a few exceptions.

  Extension that contains a binary code must be compiled for each new version of Firefox. These modules are usually installed by applications on security Norton, McAfee, ZoneAlarm, etc..

• Windows Update has disappeared from the BONE. __

  I am using windows 7 32 bit.
  Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
  Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
  Seems that windows update has disappeared from the BONE.

  Hello

  Welcome to the Microsoft answers community site. I suggest you try these options:

  Option 1: Make sure that Windows Update Service is running, or if a force start it takes

  1. open run it and type services.msc, and then press ENTER.

  2 locate the underside of services in all install services list.

  Windows Update (a)

  (b) BITS (Background Intelligent Transfer Service)

  (c) cryptographic Services

  3. check that the status is started. If the condition column is blank, right-click on the service and select start.

  4. always make sure that the Startup Type is set to automatic, and then restart the computer.

  Option 2: How to reset the Windows Update components?

  Run the Microsoft Fixit tool to reset Windows Component Update.

  http://support.Microsoft.com/kb/971058

  See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Option 3: search for viruses and malware

  (A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

  Or use Microsoft Security Essentials - free

  http://www.Microsoft.com/Security_Essentials/

  (B) check for the shape of software malware malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.mspx

  Or

  Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cancel stuff strange compatibility than the mess to the top of the screen?

  I ran this CDrom and installed a program to him and changed the settings for compatibility to the properties of this program run on windows 98 / ME, run in 256 colors, run in 640 x 480 screen resolution, disable visual themes and disable desktop composition disable the scaling on high DPI settings. For a while, it worked fine, but recently I couldn't start my computer, then he ran the Setup repair thing and restored to an earlier point. But now it seems that all compatibility settings have above been applied not only to the program, but for the entire computer. So my wallpaper and the vista swirls and all things strange look as if they were from a previous version. How can I return the normal vista stuff?

  Hi Jellt,

  I suggest you follow the methods and check if it helps.

  Method 1: Try to change the theme and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Method 2: Try to do a system restore to an earlier date and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  I hope this helps.

• (Redirected) poweredge 2950 change all readers while keeping the BONES

  I have a poweredge server 2950 with 5 x 145GB sata HDD and installed a windows 2008 R2, and I SAS 6 x 2 TB hard drives which I bought to upgrade all the hard drives on the server, how can I do that without losing the BONE? I'm new on the environment and I would be grateful to give me advice and measures on this matter, thank you very much.

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• If the BONE is removed and reinstalled will reset the administrator user ID?

  Original title: bad user.

  If the BONE is removed and reinstalled will reset the administrator user ID?

  Yes, it will be:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

• Is it possible to extract the BONE (do 'image') of BB 9000 "BOLD" to blackBerry smartphones

  Hi all

  I have two bold 9000. Today I 'accidentally' removed the operating system on one of them with the help of the JavaLoader (of JavaLoader wipe - an option). Now I want to reinstall the same OS that I had. I have not found my service provider in the list of BlackBerry download sites.

  Is there a way to extract the BONES of my second BB BOLD 9000 so that I'll be able to install it on the one I wiped?

  Thank you

  Ilia

  Hello

  I do not know if what you're asking, it's possible, but it is also not really necessary. You are not limited to your own package of carriers OS (if it's quite strange that they are not on the list...). You can use any carriers OS package... the only drawback is that if you use a version that is not supported by your operator, you can go back to their supported version if they refuse you support (they can).

  This is the best method I found for the installation of any OS for a BB:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  If you do not use a bundle of BONES other than your home carrier, then insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML.

  Good luck!

• How to change the setting of compatibility of the MSI installer?

  I am trying to install an MSI file for an application called "Encryption Plus" from the edge of the Guardian.

  When I click with the right button on the MSI file and choose compatibility, I'm presented with the checkbox to select "run this program in compatibility mode for:"

  But the drop down menu contains NO items. It is an empty list. When I click on it, it does not show Windows Vista, Windows XP SP3, etc., etc., as it should.

  If I try to do it on any other exe installation, it well. This happens only with the .msi installation files.

  21/06/2010 13:09, Jeff_PAML wrote:

  I am trying to install an MSI file for an application called "Encryption Plus" from the edge of the Guardian.

  When I click with the right button on the MSI file and choose compatibility, I'm presented with the checkbox to select "run this program in compatibility mode for:"

  But the drop down menu contains NO items. It is an empty list. When I click on it, it does not show Windows Vista, Windows XP SP3, etc., etc., as it should.

  If I try to do it on any other exe installation, it well. This happens only with the .msi installation files.

  Have you tried to install the file without changing the compatibility first?  If this isn't the case, you may be able to install and then change real compatibility on the exe file of the application (and Windows 7 can do for you automatically if it detects problems with the application).

  Hope this helps and have a nice day :)
  Patrick.

  Smile... Someone out there cares deeply about you.
  Have you updated today?
  http://update.Microsoft.com

  Smile... Someone out there cares deeply about you.

• Backward compatibility - migrating the members of 11.1.2.4 to 11.1.2.3 contour?

  Good snow shoveling day everyone!  I hope that you have found the right higher training!

  Our production ASO cube lies in 11.1.2.3
  Our test ASO cube lies in 11.1.2.4
  We want to migrate members in the outline of the ASO cube production ASO test.
  
  There is backward compatibility of the migration of members of the contour (migration of members of 11.1.2.4 to 11.1.2.3 contour)?
  In other words, we can migrate 11.1.2.4 describe 11.1.2.3 members? Is it a 'backward' migration utility that would allow us to migrate 11.1.2.4 a glimpse back at 11.1.2.3?
  
  Psalm, we know that when we move 11.1.2.3 State to 11.1.2.4, 11.1.2.4 ASO would we require to migrate 11.1.2.3 briefly 11.1.2.4 front.

  We have the planning and LCM, but tech support said 11.1.2.4 LCM is not compatible with 11.1.2.3 (aka there are a few bugs).

  Otherwise I guess we can use the contour of the OLAP Underground to migrate Extractor.

  Thank you.

  No alcoholic Cheers!

  If it is before 11.1.2.3.500, then there will be such issues as pointed out 'Essbase Administration Services (EAS) outline 11.1.2.3.500 to 11.1.2.3.000 empty file Migration Wizard creates (Doc ID 1927334.1).

  Migration of a glimpse through earlier versions is certainly risky and you're only going to be clear if it is rebuilt.