Windows 7 64 bit will not be closed down - restart instead.

Similar Questions

• HP laserjet 1022 windows 7 (64-bit) will not install printer what can I do?

  1 HP LaserJet 1022 printer

  2. Windows 7 64 bit

  3. No Error Message

  4. the only changes to the system are updated security Windows Updater. This is a new computer and old was under XP.

  I tried to delete the printer, newer software (lj1020-HB-pnp-WIN64-en) download and try to install it, add the printer through windows and even the printer will not work. The cd version will work until you are asked to connect the printer and then nothing happens. I even tried to run overnight to see if it find and install, but nothing happened. This printer is a workhorse for me and I want to keep running, any suggestions on getting this printer is recognized and run again?

  See if the 1022 is listed under other devices in Device Manager.
  Under 'Other devices' right-click on HP 1022
  Select "update driver software... »
  Choose "Browse my computer for driver software".
  Choose "Let Me pick from a list of drivers for devices on my computer.
  Select 'Printers' > next
  Under the "factory" > HP
  Under "Printers" > HP Laserjet 1020
  Select "Yes" to the warning popup

• Linksys WUSB54GC driver problem Windows 7 64 bit - will not allow

  I have a Linksys WUSB54GC 3 Wireless Network Adapter version.  I downloaded the latest driver on the Linksys support page that says that it is fully compatible with Windows 7 64 bit.  The adapter will not allow.  After 3 grueling cat takes support sessions with Linksys, they could not understand it and threw the problem back to my Tower say it must be a problem with my Windows 7 64 bit.  I searched for Windows and Linksys support forums and some people have had luck, and others have not.  The driver has been installed manually several times as well as the removal of material, resettlement and loading the driver again and again.  I am trying to connect to my router Linksys WRT54G which has the latest firmware and has another computer wireless connected to it without any problems.  If anyone can help?

  Hello

  Have you tried the device on another computer just to be sure, does it really work?
  Have you tried another device on this computer?

  Are you logged on as ADMINISTRATOR when you do the work? Right click on the driver
  and RUN as ADMINISTRATOR?

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  The device here is the WiFi device:

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 (64-bit) will not make a backup & win restore error 0 x 81000203

  I have a clean install of Win 7 pro, come to backup using windows backup, and he told me this last last backup success does not. (did not back yet!) The restore did not just restore points get error 0 x 810000203.  Someone at - it an idea of what is wrong.

  Hey Tom,

  Try the following steps:
  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.
  I hope this helps.

• Windows Vista 64 bit will not be upgraded for repair. Gives Windows could not configure some components.

  I finally got a replacement drive and ran the upgrade (to repair) several times.  Whenever it says "Windows cannot configure some components" and restart, then try again.  I tried to run this safe mode, but apparently you cannot.  I tried to turn off.NET and recommended the other 2 programs but rwhen I opened box disable it loads for a while and then is empty.  Help, please.  I don't want to do a fresh install.

  Ghustonus

  Hello ghustonus,

  Check to see if the following is useful. It is a Microsoft KB article ("> http://support.microsoft.com/kb/946078")

  When the upgrade to another version of Vista but can help in your situation.

  To resolve this issue, follow these steps:

  1. Click Start, type programs and features in the Search box and then click programs and features in the list ofprograms .
  2. Under tasks, click Windows turn features on or off.
     If you are prompted for an administrator password, type the password. If you are prompted to confirm, clickcontinue.
  3. Clear the check boxes of the following features:
     • Microsoft .NET Framework 3.0------XPS Viewer
     • Remote differential compression
     • DFS replication service window
  4. Run Windows Vista repair. Return to programs and features, and then click to select the check boxes that you clicked to clear in step 3.

  Please reply back and let us know if this can help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• continue to open with 'WINRSCMDE' window has stopped working. will not disappear after you restart twice.

  This window allows to appear with the message "winrscmde has stopped working and was closed" thereon and disappeared with restart twice. My microsoft windows is not working properly now. There was a message that was missing a DLL. How to solve this problem? Thank you.

  Hello

  1. have you made changes on the computer recently?

  2. when exactly you get the error message?

  I would suggest trying the following methods and check if it helps.

  Method 1: Put the computer in a clean boot state, then check if that helps you.
  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method2: Chell event logs and post back details
  See: What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.

• My labtop will not be closed to the right.

  My laptop will not be closed down to the right, the power button works, but the close menu button start menu is not, he will tell disconnected for a short time then say stop for a few seconds, then the screen and the power button will go black but then 3 other buttons start flashing and it lights up immediately I tried the msconfig method and when I press OK it asks me to restart my computer, I have windows 7, please help.  I also tried system mechanic, and I have no virus.  If more details are needed on my laptop please ask.

  Hello

  1. do you get an error message/code?

  2. you made any hardware or software comes to the computer before the show?

  3. What is the brand and model of the computer?

  Method 1:

  Disconnect all external devices connected to the computer except the keyboard and mouse, and then restart the computer. Check if the problem persists.

  Method 2:

  Run the troubleshooter of performance since the link and if that helps.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3:

  Download and install the hotfix from the link:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Also check the link for more information:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Pavilion dv6-1350us Entertainm: Pavilion dv6-1350 us running Windows 7 will not be closed

  Have not used my laptop for the last 45 days and have not installed anything new. W7, 64-bit running. Just used on these days and it will not be closed. When I stopped it just hangs and displays that says: "if it please do not turn off or unplug your machine. Installation of update 1 of 1 ". This can last for hours.

  I stop it manually with the power button which of course translates message when I start again that «Windows did not close properly»

  I thought that since I had not used the computer laptop or literally turned on for about 45 days, that maybe I was missing a few important Windows updates, but when I go to Windows update via Control Panel and click on Windows Update to search for updates, it "just hangs" it thus, showing never updates available. Last update of the W installed was 26/03/16 and laptop worked OK.

  Any ideas?

  I downloaded ccleaner pro (first edition) and scanned the hard drive. I checked 'fix all issues' and it worked! Whatever files or conflicts on the register or wherever was causing the 'hang up' were eliminated obviously that my laptop was able to stop. :-)

• Windows 7 Ultimate Service Pack 1 (64-bit) will not download completely stuck at 95%

  I tried to install Service Pack 1 of Windows today on my laptop.  On one of my laptops with Windows 7 Home Premium 32 bit operating system Windows Update downloaded (with 4 other updates) in about an hour and installed successfully during the shut down and restart.

  However on my laptop main used with Windows 7 Ultimate 64-bit Service Pack 1 stops downloading (although he says he always download or seems to be) to 95%.  The first time that I tried to download with 3 other updates to Windows, and it stuck.  I finally stopped after about 7 hours with it stuck at 95%.  Isolated, the other downloads and downloaded and installed after the reboot and did it in less than 15 minutes.  Then began to try to download only the Service Pack 1.  It has now been underway for six hours and is still stuck on download of 95%.

  Another forum on the web had a message that the Service Pack 1 with Windows 7 Ultimate 64 bit will not download if you have installed language packs.  (Those who took me about 3-4 days to install and download due to make them one at a time because as a group they would get hung up.)  So I hope that I did not remove the language packs to get this Service Pack 1 installed on this machine.  I hope that Microsoft would have tested on a computer in Windows 7 Ultimate 64 bit with language packs installed but maybe not...

  
  

  I HAVE THE SAME PROBLEM. I GAVE TO MY VISTA NOW, I HAVE JUST AS MUCH TROUBLE I DID BEFORE.  ABSOLUTELY, NO DOWNLOAD FROM ANYWHERE.  I WOULD BE HAPPY TO RETURN TO XP.  DEE

  I feel for you Dolores it was extremely painful and tedious experience.  The final fix for my computer was going back to the origin by default with Windows Vista Home Premium on my computer.  Then load the software Windows 7 Ultimate.  Then the installation of updates about 100 + Windows which took place including Windows 7 SP 1.  All this has been done before loading another software (except Firefox and Chrome) on my computer.  I did it too before my security software loading, which – incidentally, roughly double the speed of downloads and other features of the computer.  Then after all the updates for Windows 7 has been done, I loaded with Microsoft Office Applications and its many updates.  After that I loaded my security software and checked for viruses.  Then rebuilt all the other features, software customization, etc. of this computer.  Literally, it took over a month to return to the same functionality that it had before the Windows 7 SP1 crashed the computer.  All I can say is thank God that I am religious about backing up files and folders, so I think I got about 95% of my files, folders, etc.

  Since the reconstruction, I didn't "major" problems with Windows 7, but I cringe when I update Windows 7 via their process of updating every Tuesday.  I also try to update not updates at the same time or too large sizes in the updates, even if it takes more time to do it this way.  I also reboot after each update whether necessary or not.  I run two registry cleaners different at least once a week, or even more often as since the failure of catostrophic SP 1 of the operating system.

  I will say this though, a lot of programs/software, I had that wouldn't work with Vista, all of a sudden work again with Windows 7.

  Good luck!

• Windows Vista Ultimate 64-bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Thanks for the help. Sorry for the vague information. I was finally able to diagnose memory problems. I have reset the chip memory and repaired the computer by using the option "repair your computer" F8.

  Once again, thank you for the help.

• I can't download Windows updates or updates of Windows Defender, and my BITS will not start.

  Hi, I have a HP Pavilion dv4 Notebook PC, and I can't get my updates of windows to download anything. My BITS will not start.

  -Processor: Intel (r) Core (TM) 2 Duo CPU
  At 2.10 GHz, 2.10 GHz T6500
  -Memory (RAM): 4.00 GB
  -System type: 64-bit operating system
  -Windows Vista Home Premium Edition
  -Service Pack 2

  I have Webroot AntiVirus with Spy Sweeper and I recently downloaded the Malewarebytes Malware Anti.

  Whenever I try to download an update for anything, be it Itunes, Windows Defender, Windows updates, updates to HP or Microsoft Updates, they do not always arrive.

  When I go into the service menu & try to start BITS it comes up with this message:

  Windows cannot start the Service on the Local computer's Background Intelligent Transfer
  Error 126: The specified module is not found.

  When the updates of Windows fails to download updates, it comes up with the error Code: 80246008.

  I tried to download on microsoft.com BITS Repair tool, but it is said that the tool is not necessary.

  I really need someone to help me and to understand this point for me, it's happened now for about 3 months. When I bought the laptop I had Webroot AntiVirus with Spy Sweeper installed, and I just installed Malwarebytes' Anti Malware, a week ago.

  Anyway, do the following:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in # 1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. click right on the file saved in # 1 b above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  5 test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  Recent items in Windows 7 64 bit will display recently played .flv files but not show .avi or .wmv

  How can you do recent items don't forget these past .avi and .wmv files

  Hello

  You can change some values in the registry. To do this, copy / paste the following text in Notepad, save it as a MP3WAVRecent.reg file and double-click this file to add it to the registry database:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.MP3]
  "EditFlags" = hex: 00, 00, 01, 00

  [HKEY_CLASSES_ROOT\WMP11. AssocFile.WAV]
  "EditFlags" = hex: 00, 00, 01, 00

  Note that plus save recently used for the Jumplist instead of frequently used must be checked in the Options of WMP - player, as well as the music at the bottom of life private tab.
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• If I update to Windows 7 64-bit Windows XP 32 bits will my computer run better

  My computor is custom built Vista while not like Vista so put Windows XP 32 bit in there... I want to increase my gaming experience and looking for a way to use more ram XP 32 bit will allow to me.  I used Microsoft software to determine if my computer can support Windows 7 64 bit.  According to Microsoft, it will be.   Question is, if XP does not work for me more and XP 64-bit is not available, Windows 7 32-bit or 64-bit windows 7 be better for me.  My motherboard is capable of sli and currently have a processor intel core 2 duo processor, shopping for a core 2 quad.  I really need someone who knows better than I to advise me if windows 7 32 bit will allow the ram I want to run or will I have 64-bit :)... comps?  By the Way rock you all take the time to help me with all this :)...

  Hi Eloise,.

  I believe you are referring to Windows 7 Upgrade Advisor. If the tool indicates that the computer is compatible then you can certainly go ahead with the upgrade.

  As for your question on performance, you can check out the following link.

  Improved performance - features of Windows 7

  See also:

  Upgrade Windows XP to Windows 7 - help & how-to - Microsoft Windows

• my laptop will not be closed. I have xp proffessional__

  my laptop will not be closed. I have xp proffessional OS

  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

  Utilities for Windows XP stops
  http://aumha.org/win5/a/shtdwnxp.htm

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.