HP LaserJet 1320 Toolbox download

Similar Questions

• Download laserjet 2600n toolbox

  How can I find and download for Laserjet 2600n Toolbox

  Here is the link to the box software to tools: HP Toolbox

  I hope this helps!

  Sean

• How to find and install software for printer hp laserJet 1320 series

  We have a printers hp laserJet 1320 series in our hotel that I would install on my pc. Unfortunately, the printers custordians lost the CD and my laptop uses flash rather than CDs discs.

  Can you help me how to install the soft ware from the Internet on my pc?

  Hopeful, Aaron

  On Saturday, May 19, 2012 17:18:30 + 0000, AaronManda wrote:

  We have a printers hp laserJet 1320 series in our hotel that I would install on my pc. Unfortunately, the printers custordians lost the CD and my laptop uses flash rather than CDs discs.

  Can you help me how to install the soft ware from the Internet on my pc?

  You don't need any CD. Go to the HP Support and drivers website,
  and search for your printer. Find the appropriate driver for your version of
  Windows, download it, install it and follow the prompts.

  Ken Blake, Microsoft MVP

• HP laserjet 1320 connected to windows 7 but cannot print on a windows xp computer

  We have 4 computers connected to a printer.  2 computers windows 7 and the other 2 are windows xp.  When I try to find the printer and connect to it it is an error code that is displayed saying "the server for the ' pcl 5' hp laserjet 1320 printer does not have the printer driver installed.".  If you want to find the right driver, click ok.  otherwise, click Cancel and contact your network administrator or the OEM for the printer driver correct"I don't know where to even try to find the right driver.  I tried uninstaling and reinstaling the drive of the printer and it still does not work.

  all I ended up doing was to move the printer to the computer xp and related windows computers seven until the printer this way, everything works and there is no need to download all the drivers.  I tried to download everything as you said, but I more was skip a step or put in the wrong place.  Thanks anyway for your help

  Zack

• LaserJet 1320: Hp printer does not not on Windows 10

  I just recently upgraded to Windows 10 and the HP LaserJet 1320 printer does not work. I went to the site and downloaded the correct driver (64-bit). The printer appears in the printer list when I go to devices and printers, but can not choose the printer when I go to print something. If I go into settings > devices in Windows, I'll see the printer listed, but I can not set the default printer, and it says "Driver is unavailable."

  Is there a better driver, or a way to fix this?

  Thank you.

  It is connected through the USB port, and of course, I tried connecting directly first, who did install a driver, but he had the same result as the download of the driver separately. I was finally able to make it work by installing a different driver, which I don't remember, but this has been resolved weeks ago.

• Unable to print on Laserjet 1320, Windows 7, Google Calendar

  Connected my Laserjet 1320 to my new PC with Windows 7. Solved a problem with printing using this forum (print multiple copies). Tried to print a page from Google Calendar by pressing the "print" key - box came the calendar print preview display. Click on the "print" button - nothing happens. I have printed successfully to other pages in the Internet, but it will not be printed. Ongoing work around is to hit the Save button slot, opens Adobe and print the PDF.

  I know you weren't asking me to download something terrible - I felt just like installing & uninstalling stuff. However, your suggestion to try other browsers made me think. With getting the new PC with Windows 7, when I installed Firefox, this is the most recent version (not yet on my old PC). And the new version built in reader of PDF - aha! Went into Firefox and found how to go back using Acrobat to view PDFs. Print process works now.

  My apologies to HP - it wasn't your fault! That's the problem with changing several things at the same time - when something doesn't work, you don't know what caused it.

• HP LaserJet 1320 PCL 5, x 64

  Please help me. I have this old HP LaserJet 1320 printer, but can not find the driver. I have a memorystick with the driver, but this new PC I found in him. Cordially Karlo V. Andersen

  Hi Karlo,

  I suggest you to download and install the drivers for the printer from the manufacturer's website.

  Reference:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=410624&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4132%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• LaserJet 1320: Print multiple copies

  Regardless of the number of copies I specify to print on my Laserjet 1320, it will only print one copy. I use Word 2010, Windows 8.1

  I suspect that the following is the case:

  • Your document is a MultiPage document (i.e. not just a single page).
  • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
  • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
  • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that the LJ1320 supports one of these.

  You can confirm that the foregoing occurs by:

  • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
  • Then examing initially file resulting .prn (you should be able to open it in Notepad).
  • Most of the file can be unintelligible, but initially will look like:

  

  If the command SET QTY is there, this confirms that the driver think the printer will make copies.

  If so, check the settings of the device to the printer:

  

  to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

  If the disk hard printer is set to installed, change to not installed.

  If the Mopier Mode is set to Enabled, change it to disabled.

  Then repeat the tests to see if it makes a difference.

  He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

• HP Laserjet 1320: Printer hard drives

  Is about to recycle both HP printers for new ones.

  These printers have HP hard drives:

  HP Laserjet 1320

  HP Photosmart8250

  Thank you.

  The Photosmart 8250 and Laserjet 1320 contain not all hard disks.  Make sure that no media cards are left in the Photosmart 8250, these could contain images that you want to keep.

• HP laserjet 1320: PRNTER IS NOT PRINTED AND ITS CRIMINAL IS OFF

  Hello

  I have HP laserJet 1320 printer, before its usb connector seems to be mulfunction, I replced the trainer, he began working again, but after a few days failed to print and its criminal turned off, put except when I turn on does not start immediately, will start after the switch several times.

  Any help is highly appreciated. Thank you

  No idea what you mean by criminal is off. If you have replaced the trainer, remove side trim and with the power off, reinstall all connections to the new trainer and see if it boots. If still an issue I think that the new trainer has a problem. There is an engine test button below the trainer that you can press to see if it prints a page with lines. If it is then that confirms that the trainer has a problem.

• HP Laserjet 1320 orange flashing, fails to print on Windows Vista

  original title: orange flashing, fails to print

  HP Laserjet 1320 - two episodes of persistent production (almost - some only wingdings) blank paper after normal printing.

  I stopped this by output, turn the printer off.

  Now orange flashing only, does not print at all.

  Have you tried putting off tension, even with the computer and have run tick - found Nile.

  Thank you very much.

  Hi RosyJay,

  (1) you get an error message?

  (2) remember to make changes before this problem?

  
  Method 1: run the printer troubleshooter, see the link below

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:  Print a test page, see the steps mentioned in the link below - you can print a test page to check if a printer to print graphics and text correctly. A test page also displays information, such as the printer name, model, and version of the software driver that can help you troubleshoot printer problems.

  A test-print page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

• hp laserjet 1320 problem

  I have a problem in a laserjet 1320, the ready light is on, but it is not print a test page when press the green button in the printer and the light does not flash

  Thanks for your support, the problem was that the cables that are connected to the Panel (which has the green button) were not connected on closely, it was my fault
  Thanks again for your help

• Color laserjet 1600: color laserjet 1600 Toolbox not install on win 7

  Color laserjet 1600 Toolbox not install on win 7

  Have uninstalled and rebooted and installed the complete 'solution' software & restarted and it isn't there...

  Cartridge issues are normally resolved by changing the cartridge.  It is usually not much anyone can do to fix one defective, other than frequent cleaning, cartridge until ink is exhausted.  It is often a lot of annoying for most people to bear.

  If you have isolated him down to a problem with the drum or cartridge that my suggestion is to replace it with another cartridge first and consider other options for cleaning and maintenance after.  If the Exchange with a new cartridge solved the problem, you can pursue the options of guarantee/return/refund from the supplier you bought the cartridge under whatever policy they have for defective cartridges.

• HP LaserJet 1320 Print blank Page extra

  LaserJet 1320 shoot two sheets of paper when printing a single page. It does when you print a test page.

  Its also happens when I do the desktop remotely.

  Depending on the configuration page, the total number of pages does not include blank pages that follow each of the printed pages.

  Is there a hardware problem or configuration of printer?

  If it was the model that was network when you printed the configuration page that you would also get a Network Setup page.

  You must be connected to a network via an Ethernet cable to see the integrated Web server, if it is a model that supported it.

• Only a network printer LaserJet 1320 prints

  Hello

  I have a shop.  In my office, I have a HP Laserjet 1320 PCL printer attached to my new computer running Windows 7. On my network, I also have a computer in the store that is running on Windows XP. After sorted desktop drivers to make the printer work with PCL 6 (it printed only a copy when the value of PCL5), I cannot now make the computer store impression. Is it important that computers are running a different version of Windows and the computer of the shop would have the Windows 7 driver for the printer as well as the XP driver or just one of them and if so the one who! This file the printer disk/s should be in?

  If the printer on the desktop computer port is LPT 1, should the store by using the same or does \\oshop?
  Any advice would be much appreciated!
  Thank you

  your best solution is directly connect to a computer and then share the printer from the pc

  LeftnWrite wrote:

  Hello

  I have a shop.  In my office, I have a HP Laserjet 1320 PCL printer attached to my new computer running Windows 7. On my network, I also have a computer in the store that is running on Windows XP. After sorted desktop drivers to make the printer work with PCL 6 (it printed only a copy when the value of PCL5), I cannot now make the computer store impression. Is it important that computers are running a different version of Windows and the computer of the shop would have the Windows 7 driver for the printer as well as the XP driver or just one of them and if so the one who! This file the printer disk/s should be in?

  If the printer on the desktop computer port is LPT 1, should the store by using the same or does \\oshop?
  Any advice would be much appreciated!
  Thank you