HP Laserjet 4 MP: HP Laserjet 4 MP - just switched to Windows 10 - cannot print

Similar Questions

• Windows 7 cannot print on the HP LaserJet 5 p printer

  I spent about 5-6 hours on this and am pulling my hair out...

  I have a new computer HP w / W7 Home Premium 64-bit.  And I connect to my old LaserJet 5 p via a line parallel to the printer, to a man, 25-pin (DB25), which is connected a parallel cable DB25 female that has a USB port on the other end. USB is connected to the port on the new computer.   The peripheral area is listed as only an "unspecified unknown device."

  I started with W7 canned programs add a printer, setting up devices, download the drivers. Updates to the driver.  When the test print did nothing, so I went on troubleshooting.  So, which went nowhere...

  Then I went to HP, looked through many sites of help Articles/community and finally used their technical support for BOTH the new computer area (had me re-doing the preserved parts, download the drivers through zone devices, once again, and when have not (yet), they suggested I call their "Commercial LaserJet" technician who said...) "It is no longer supported." And if the driver that you downloaded does not work, it is not MS problem, our.  Contact with them. "(Possibly), brings me here.

  I went through the MS canned his fix and downloaded manually from the site of HP (as opposed to automatic download/updates devices), only to get a message... "Windows has encountered a problem installing the driver... error occurred during the installation, because it is not digitally signed or not signed it."  Contact your hardware vendor (IE HP, which does not support)

  Well, you get the picture... I work a pretzel here... MS wrote it's HP, HP says it's Ms... and all I want is to use my printer who worked two weeks ago on my old Compaq!

  Therefore, there is an index HP I found that looks like I might be closer to the problem that said .doc, find an interface IEEE 1284 in your devices and make sure there is no error code.  So, I found IEEE 1394 or something like that (I'm not there now).  BUT no IEEE 1284. Let the only error codes!

  So, I came in contact with the service of HP, and how IEEE 1284 it there instead.  They said they do not know, and it's a problem of Ms.

  So, to dig a little deeper, I found in 'Device Manager' I might add an IEEE 1284 printer... BUT slide it towards the bottom of the list did not have the 5 p. Close, but so far and nothing to update, as in the other area of the device...

  So, I'm pretty frustrated that a HP printer cannot work on a HP computer, even after the download a driver of HP. This is 1284 IEEEE something you can put in place?

  Clues on how to solve this problem would be very, very, very appreciated!

  Thank you

  DRJames

  A driver for the Laserjet 5 p printer is available on Windows Update. See find and install printer drivers

• HP laserjet 1300: after updated W10 at another level cannot print locally on connected LaserJet 1300 preinstalled

  Recencly upgraded to Windows 10 year old PC.  The printer, usb, is a HP Laserjet 1300 and the upgrade found a driver and local printing works very well.  I have a home network that an old XP pc is connected to and used the 1300 without problem.  Upgrading to W10 came from W8.1 and whatever the driver he had allowed things to work.  On the XP poster print spooler and the error now.  HP Print and Scan Doctor run on the W10 pc indicates bad port, but it cannot be changed.   The port on the pc W10 is DOT4_001.  Doctor print run on the XP indicates that the printer is indeed available, but printing fails.  The W10 pc is W10 home so I can do the print management service to see what real driver has been installed.   The print doctor also pointed out that the full usb support is not installed.  I don't know what it is and clicking on get the software takes me to the center of hp supporot.

  I would appreciate anyones ideas on how to solve this problem.

  I got the printer work from XP to pc W10.

  The upgrade of the W10 has not created a home network as what was there in W8.1.  I had created and made there several days that the residential group names are the same, etc.  Even without the network in place, worked a ping from one to the other.

  I had old information to work for nearly 30 years as a programmer for fortune 500 company system and that he was referring to XP and more recent Windows system, demanding that internal guest account is active.

  W10 upgrade is not the active guest account.  I lit with a guest net user / activate: Yes and I tried printing and the bingo it worked!

• HP Color Laserjet 1600: Driver for HP Color Laserjet 1600 10 Pro 64-bit Windows

  When a driver available for the HP Color Laserjet 1600 for 10 64-bit Windows?  It printed fine with Windows 8.1, but since the updgrade Windows 10 it prints nothing.

  Thank you

  JN

  I answered my own question or find a temporary solution until the official driver is published. After a few successes and failures with different drivers HP Color Laserjet, I downloaded the driver communication USB LaserJet of HP (DOT4) of Windows 8 and higher (64-bit) , located at the link below.  It is listed for the printer HP Color LaserJet 3700 , but it worked for the HP Color Laserjet 1600 as well.  Hope it helps someone.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=315850&swLangOid=8&swEnvOid=4192

  Thank you

  JN

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• LaserJet p1102w, windows 8.1, prints, but reports error

  My laserjet P1102W prints fine wireless, but an error every time.

  Yes, I reinstalled the latest version of the installation software. Yes, I tried printing doctor, he found nothing.  Yes, I downloaded and installed the latest drivers from that date.  Yes, I tried the tool which is supposed to find the latest drivers he, he did not support this version.  Yes, I looked at the ethernet configuration and it was fine - I'M able to print as I said.

  No, none of this has worked.

  I receive the error message in the upper right of the screen whenever I try to print.  All that says is that the printer cannot print the file.  Yes, this happens since the print spooler.

  So, what's next?

  Hi @draythomp,

  I see by your post that you are able to print on the wireless network, but you get a message error "the printer can print the file. You have successfully updated the software of the printer with the same results.  I can help you with this, but I need more information.

  This error appears when printing from any application?

  Meanwhile, empty folder of spool and restart the print spooler.

  How to clear the current print queue in Windows Vista and Windows 7.

  You also update the firmware of the printer?

  If this isn't the case, then I would update the firmware to see if this will help. This, although by a USB connection.

  HP LaserJet Pro P1102w printer drivers.

  Select your operating system, click Next, click the link for the firmware.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  Good day!
  Thank you.

• LaserJet 1018 will not work on windows 7

  I have a HP Laserjet 1018 which works fine on Windows Vista 64 - bit.  I just built a new PC and put Windows 7 Home Premium 64 - bit on it.  The drivers on the HP support site will not work.  When I try to print something, it is sent to the printer and disappears.  I interrupt printing that document actually get sent to the printer and it appears.  As soon as I have some Nations United-pause the printer, the document disappears, but nothing prints.  Normally, when something is sent to the printer, the "information" LED yellow lights up momentarily and prints the document.  The led does not at all.  I tried new cables, uninstalling and reinstalling etc.  Nothing works.  Just to be sure this isn't a printing problem general, I connected a Laserjet 1020 on the new machine and it works fine.  However, it is my printer to work and I can't leave it on the new computer, which is a personal computer for my home.  It worked to identify that my copy of Windows 7 allows you to print, but is not a long-term solution.  Help?

  Hello

  Thanks for the post.  On this one, I have some ideas.  I pasted the links below.  One is for the driver Win7/64 page and the print diagnostic utility.  I would certainly recommend the utility to narrow down the issue.  The other is a related document in queue which contains excellent information.  Good luck!

  http://support.HP.com/us-en/document/c02239404

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1814094#n190

• Pavilion 550-122nd: Laserjet 1018 is not recognized in Windows 10

  LaserJet 1018 is not recognized in Windows 10 of 155-122nd Panilion.

  The "result of software and driver for laserjet 1018' has not failed (new driver)

  USB ports active aere

  Do I need a new driver for Windows 10?

  Is a new availabe driver for Windows 10?

  Thank you.

  Hello and welcome to the community of HP @Rikkie1,

  I understand that you're having trouble installing the drivers for your HP LaserJet 1018 on your computer Windows 10. I will do my best to help.

  Only the integrated Windows Print Driver is compatible with the HP LaserJet 1018 on Windows 10. Below, I have posted a link to a document that has some instructions on how to install and use the integrated Windows print driver. Please try all the steps in order and get back to me with the results.

  HP print driver printer - install and use the built-in Windows

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• HP Color LaserJet Pro M176n can take care of Terminal Server print?

  Hi all

  Because my HP P1102 printer cannot print RDP, so I decided to buy a new printer for the printing of the server terminal server. I am currently using Windows 7 64 bit and the terminal server of my company is can I 2008 Server 64 bit.

  Someone know if HP Color LaserJet Pro M176n support RDP printing needs? If not, please would you advise another model of the printer for the printing of the server terminal server thank you.

  Kind regards

  Lapson

  Don't worry about the model of the printer when you print from.  Is the printer driver which needs to understand where the print job is coming so that he can pass the print stream to the printer.  If the printer driver is not allowed to communicate between the server and your computer, then you must correct this problem first.

  Printing from a Server Terminal Server is normally something that needs to be configured when printing to a USB cable.  Your RDP client has its enabled print transfer function which allows him to pass the objects on your printer to your personal computer on the server.  Without the correct feature is enabled, you will not be able to print with any printer USB model.  Check with your system administrators to see if they can enable redirection of printer for you.

  Otherwise, you will need to find a way to install your printer on the network.  This can be difficult if you are telecommuting from a personal network printer does not exist on the corporate network.  It's less that you can get your company to install a router with a VPN feature on it.  In this way, you can connect multiple personal devices on the corporate network.  However, your network admins should be aware that you eat additional IP addresses on their network and that he can't ask you to do it at all.

  Otherwise print on a network currently on the network printer should be child's play.  All what you need to do is install a UPD on the server and that it points to the IP address of your network printer desired.  The server will have no problems to send jobs to the printer from here.

• LaserJet Pro M177 MFP: HP LaserJet MFP M177fw Pro no widget Scan on the printer

  My newly purchased printer HP LaserJet Pro MFP M177fw don't have a widget to Scan on the printer screen. So, I can't scan and send it to email directly, without having to turn on a computer.

  Can you please help me, thanks.

  Herza

  Hi @Herza,

  I see by your post that you would like to know how to scan from the control panel of the printer to send. I would like to help you today. Please select "Acceptable Solution", if these measures help to solve this problem. Thank you.

  This model is not the function of scan from the control panel. You must use the HP scanner on a computer to scan software.

  This document provides the steps for scanning on Windows 7. HP LaserJet multifunction printers - how to scan (Windows 7). You can use the HP scanning software to scan a document and then send it to the email.

  But you can install an APP on the printer itself called "Scan to Email".

  Once you register with www.hpconnect.com, you can add the APP.

  Click on add a device under the devices tab.

  Put in the claim code you printed to register and add the printer.

  Click the Services tab, then click on the sign - on the right side.

  Select your printer from the drop-down list.

  Then scroll to the application called "Scan to Email".

  Click on add to my printable cards.

  Now you should have an icon on the screen of the printer under APPS, called "Scan to Email".

  I hope this helps. If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• My HP Color LaserJet CP1518ni cannot print .pdf files

  Dear,

  I have a printing problem with my HP Color LaserJet CP1518ni (function USB my iMAC), since I installed the OSX Mavericks.

  Although my printer print word files, cannot print .pdf, even through the software PREVIEW or ACROBAT files.

  It gives the break signal... any solution about that?

  It is very annoying.

  Thanks in advance for your comments or help!

  Hi Kpanag

  I understand that you cannot print the PDF files from the upgrade to Maverick.

  I'll be happy to help you with this.

  I check and repair the authorization to drive on the Mac.
  Go on the hard drive of the Mac, applications, utilities, disk utility, click Mac hardrive left side, click on verify disk permissions, when it is finished click on repair disk permissions.
  (when it's over will show disk repair completed)

  Run the Apple updates also. (the Mac uses probably drivers 10.8)

  Make sure Acrobat is up-to-date.

  If you need more simply make assistance let me know.

• MFP M277dw: M277dw LaserJet Pro MFP - cannot print from word, PowerPoint and excel

  Hello

  I just bought a Pro M277dw MFP LaserJet

  It can not print a word a simple page, PowerPoint, and excel.

  No error message with word.

  is the printer online for PowerPoint.  (when I just did a test of the printer page)

  In excel it says maybe NOT enough avaiable memory...

  I find that very strange that it only 1 page and nothing else is running.

  Please review this issue as soon as POSSIBLE.

  Thank you

  Dear Liquid083,

  Well done.

  Thanks for leading me in the right direction

  This "Universal Post Script driver" has worked for my word, PowerPoint and excel

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4157320&swLangOid=8&swEnvOid=4132

  For others who are facing the same problems, please click the link above.

  Then look at what follows.

  HP for Windows PostScript (64-bit) universal print driver 6.0.0.18849
  11 December 2014 19.3

  Thank you

• HP LaserJet P1102 cannot print both sides of the paper

  I updated my Windows 8 Windows 8.1 and now I can't print both sides of the paper.

  In my old Windows 8 my printer HP LaserJet P1102 printed the odd sides of the document, then a pop-up window appears and when I click on the 'next' botton and submit the documents to the printer printed the sides of the document. After that the Windows update in the context menu does not appear, so the printer simply prints the odd sides and then nothing happens (just the red flashing on the printer).

  I tried to update the driver (downloaded from your site), but nothing has changed.

  I hope that you can add some useful tips and I can solve this huge problem.

  Thank you!

  Hello

  I understand that you can print is more on both sides.

  When the light flashes try and open and close the lid to see if continues to print.

  (there is no button for the printer but which will resume print jobs)

  I would do a complete uninstall and reinstall the printer software to see if that makes a difference.
  You can download the drivers from this url.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110396&

  Win8 and Win8.1 drivers are the same Version9.0.

  If you need more simply make assistance let me know.

  Please let me know if the printer is connected by usb or the installer on a wireless network.

• LaserJet Pro 200 m251nw: how to disable these pages printing pesky notification?

  I just bought the LaserJet Pro 200 m251nw to help with homeschooling and coupon printing. A big HUGE machine so far, one small complaint... whenever I have do something or something (ie: plan a printout of the spreadsheet on an app) Springs this page full color printing. I don't want to lose my ink telling me I just do what I know already! Can I disable it somehow? Thanks in advance!

  Hi @g33kyg1rl

  Welcome to the Forums of HP's Support.  I see you want to learn how to turn off notifications in HP connected for your Laserjet M251nw printer.

  Please follow the steps listed below:

  1. Connect to your HP account connected, which will take you to the Welcome screen.
     
     
  2. Please click the drop down arrow next to 'Settings' menu and choose 'Notifications '.
     
     
  3. If please check or clear the parameters of notifications that you prefer and then click on "save changes".
     
     

  Please let me know how it turns out.

• LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

  I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

  10 64-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

  10 32-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".