HP laserjet 5n: Eprint with printer inherited?

Similar Questions

• HP LaserJet 3200 - problem with printing ink, hoof?

  Product name & OS: HP LaserJet 3200 all-in-One / Windows XP

  When a page prints, there is a gap that occurs on the page that runs the entire length of the page where there is text.  It's like a line, but not a line... the opposite in fact.  Everywhere where there should be text/ink, he is absent.  Gap space is the equivalent of one letter of text width.  Once the page is printed, when you look at the page, it has the appearance of a line of ink missing from the top of the page toward the bottom of the page.  It's as if there's a filibuster any.

  In addition, this only happens in copy mode, NOT print mode.  Specifically, everything I print from my computer comes out perfect with no problems.  It's only the pages I put in the feeder and press the copy that eventually this problem.  Thanks for any help that anyone can provide.

  Hello selectmarketing,

  To get your question more exposure I suggest you post in the trade forums as the HP LaserJet 3200 is a commercial product. You can do the HP Enterprise business community.

  The support of your product page can be useful in the meantime:
  HP Support Center.

  I hope this helps!

• I can eprint with printer HP 3050 J610A

  I can help eprint. hp3050 J610a printer

  Unfortunately, the answer is no.

  Seethis threadto see what printers are ePrint (cloud services) capable.

• HP LaserJet P1102w: Help with printer install

  HP LaserJet P1102w chip installed on the new windows 7 PC as a USB device when I am logged in it.   How do I make a printer so I can set as the default printer?  On the control panel / devices and printers, she appears as a device, not a printer.

  Solved the problem.  Re-directed HP smart install and the drivers have been loaded.

• LaserJet 1600: problem with printing on color laserjet 1600

  I just replaced all color cartridges, but the left side of the print is faded.  I cleaned it up, and I don a supplies status page.  black and cyan colors print correctly.  yellow - the left third of the color bar is faded to white.  Magenta hardly shows in color at all.

  any suggestions?  Thank you

  Problem running on this series with the Magenta.  Yellow it is possible also, but more than likey you have a bad toner.  See instructions attached on how to fix.  A lot of work but not so hard.  Usually I leave the track of wire black plastic which crosses the upper part as it is a bear to get back up and is not necessary.  A couple of tie wraps will do the trick.

• Ask for help with printer inherited

  I want to get a printer networked - is no longer supported by its manufacturer - to print over wifi, ethernet or less direct by USB. Indeed, one of our two iMacs can print it by USB (only). The problem is that the other cannot, if directly connected by USB or share from the first iMac. I get an error message that the printer is not connected.

  Drivers installed on both machines seem to be the same, Brother_HL_2170W_series, into the 4.5.0 version numbers.

  The printer is a laser 2007. It ran fine on ethernet and wifi until I put the two iMacs to Mountain Lion. At this point if I ever turned off it would fail to reconnect when turned back on. It was once possible to make one kind of reconfigure by typing its IP address in the URL of a browser bar and then goes to a Brother's Web page. But the IP address of links is more to his brother, as I discovered after accidentally unplugging the printer this week. Can I not run the original CD-ROM, which includes a configuration utility.

  I'm still in the OS X 10.8.5 (the last OS to fully support my FireWire hard drives) and suspect that a new update would help little for a legacy printer. Not the end of the world if I have to buy a new printer, but I regret that throw one that is mechanically correct.

  Suggestions appreciated.

  I'm sure that Printopia decisive tactics can meet your needs. Call them and describe your needs. We use it in a similar setup and it works fine.

• Problem with printer Laserjet 4 M Plus printer

  I have a Laserjet 4 M Plus printer which I had connected directly to my office with Windows 98.  The printer worked fine with the office.  Well, I've upgraded the desktop of Windows XP and now I can't the printer to print at all. The printer has been added to the desktop, but it will not print a page to test the computer or any program at all.  Your help is greatly appreciated in getting my printer works with XP.  Thank you!

  Message edited by cvanderhoef on 12/21/2008 13:28

  Let this step by step, as we do for the 1st time

  1. set up your printer (cords & cables)

  2. turn off the computer

  3. connect the parallel cable or usb

  4 turn on the computer

  5. turn on the printer

  6. place the disc in

  or install from windows printers list

  Download of HP or

  7. open the folder "default" printer

  8. check the cable port

  example: printer properties

  tab select "Ports".

  9 look for ports using its

  the ports are: "the LPT1 printer Port:

  "USB: printer name?

  Make sure that the port is checked in the box of

  10. click on the "General" tab > "printing preferences...". »

  11. Select "advance" tab tick to set lower resolution

  that i had this problem on one of my printer

  because the high resolution would never print

  12 OK and test print the printer if successful

  13. click OK final

  14 perform the normal functioning of every day as everyday u

  15. good luck

  Message edited by rickp400 on 06/01/2009 12:49 AM

• LaserJet pro M127fw MFP: print with Windows 10

  Since I upgraded to Windows 7 to 10, I had a problem with printing to my Laserjet MFP M127fw pro.

  In the print preview the page to print looks like square rather than rectangular but the picture about this seems OK. When I print in fact the image is crushed vertically. The problem is the same print with Word, Excel and Acrobat.

  I have been informed that a new driver is required, so I deleted the old driver and downloaded a new one compatible with Windows 10 but the problem persists.

  Thanks for the help but it seems that the problem was that my screen resolution was completely wrong, so that if the image looked OK on preview before printing then it would look incorrect when printing and vice versa.

• HP Color LaserJet MFP M277 Pro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...  Should I replace the black toner?

  Hey @candreas,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Laserjet 2840: HP Laserjet 2840-custom color print after Windows update.

  I updated my Windows 8.1 operating system (64-bit) with the provided updates, automatic updates of Windows, about two weeks ago.  After that my HP Laserjet 2840 will not print anything in color.  It copy in color, so I know that the printer still works.  Ayone have any ideas as to why this happens, and yes I tried to reinstall or update printer drivers provided on the HP website.  Still does not work and want a solution or I will throw this printer out the window, literally and buy something new that works with 8.1.

  Updated - with the help of the forum search on another HP Color LaserJet-cannot print in color - I used these steps in this post to solve my problems of color printing.  Please keep this forum so valuable to others who have questions and need to find solutions.

• Problem setting up my iPhone, iPad with printer MFP HP 1213

  I have an iMac, MacBook Pro, iPad, iPhone 3, iPhone 4, iPod. Almost all have the iOS responsible henriq. I have also two HP multi function printers: HP LaserJet M1536dnf MFP so MFP HP LaserJet Professional M1213nf. Recently, I downloaded PrinterControl from the iTunes Store and installed on my iPhone, iPad etc. The above two printers are connected on two separate wifi networks. The 1536 printer when I try to connect to my iPhone, the iPad with PrinterControl I am able to print, scan and do everything. All handheld computers are able to immediately recognize the printer. Unfortunately when I try to connect to 1213 all-in-one that is located on another wifi network and is connected to a time Capsule I am unable to do so. The PrinterControl says "no printer found. On the other hand in all the devices of Air print feature is working perfectly fine. I can take my fingerprints of mail and it is recognizing the MFP 1213 easily and get the made impressions.

  Even after through many forums and discussion forums, I couldn't solve the problem. I contacted HP support and said I need to contact Apple support. I also tried and contacted the Apple support which in turn said that because the PrinterControl is a third-party application they will not be able to provide any help/support and Air Print being workinf fine then there is no problem with Apple products. Please help, how to reolve the question and 1213 HP MFP get well with Apple products.

  Hello

  I'm afraid that this behavior is expected because the M1213 is not supported by the HP printer control application.

  You can find this information listed for the HP LaserJet Pro M1210 Multifunction Printer Series within the category Printers HP LaserJet Consumer below:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• LaserJet 600 m602: Laserjet 600 too large print the number of copies

  I work at the public library, and we have a Laserjet 600 m602 to our public access computers to use. It is a network printer. We have problem with printer what impression of the office 2010 products, if more than one copy is requested printer will go crazy and print several copies much more than requested. The printer screen will say 1 X print the number of copies. Only way to stop it is to remove as many jobs he sees. It acts as if it were several jobs. We do not see this problem when printing from the Internet. Driver HP laserjet 600 M601, M602 M603 PCL6 HPCM600c. processor is set to WinPrint - Raw. Bidirectional support is disabled.

  Firmware is 2305090_000468

  I had already installed the pilot PCL6 universal and implemented to date to 600 M601, M602 M603 PCL6 thought that could be the problem but it has not fixed the problem.

  I would appreciate any help on this matter before going to is broken on paper.

  Thank you

  Melanie

  Solved.

  After a lot of research on reading and tests finally discovered the problem with drivers print and collate. Default settings for Microsoft Office 2010 and Adobe Reader are to gather if one that one copy is activated. For some reason any that caused printer to go crazy.  I tried the Standard driver and universal for the printer, but always had the problem of printing too many copies. I used the PostScript driver and it solved the problem.  Now just get the number of copies required. Thank you for your help.

  Melanie

• LaserJet 1022 don't print Windows Explorer 9

  LaserJet 1022

  Windows 7

  When I have updated to Internet Explorer 8 to 9, I can't print with my Laserjet 1022. This printer works with all my other programs.

  I get the following error message: an error has occurred in the script on this page.

  Line: 2126

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  It looks like IE9 dislikes the print driver for your printer. The fix for this would be to uninstall IE9, or use a different browser like Chrome or Firefox (both linked below). A solution would be to use a different print driver for the printer. These instructions are below. I don't know which driver will work as a good replacement then you may need to try a few. Hope that helps.

  Chrome:
  http://goo.GL/MAqrN

  Firefox:
  http://goo.GL/7ICv2

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9 select a Laserjet driver form the list. You may need to try several to find a working one.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

• HP Laserjet CM1415fnw does not print wireless

  Original title: HP Laserjet CM1415fnw

  My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

  Hey Kevin,

  What version of the windows operating system is installed on your computer?

  Refer to the steps in the following article and check if it helps.

  HP Print and Scan Doctor

  Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

  Printer in Windows problems

  Keep us updated on the status of the issue.

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!