Similar Questions

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• How can I connect my iMac for HP Laserjet CP2025 El captain

  Connection to HP Laserjet CP2025

  Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

  This article should help you to solve the problems of printer on your Mac - Apple Support

• I need the Hp Laserjet M2727nf Hp scanning software

  Need a Hp Laserjet M2727nf Hp scanning software

  You really have a classic Mac, a very old machine now.

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

  When I scan or fax, we get:

  PCL XL Error

  Subsystem: TEXT

  Error: InternalError 0 x 50

  File name: cheettext.c

  Line number: 710

  The printer is a Pro 400 Color MFP LaserJet - m475dw

  Windows 7 Professional Service pack 1

  What should I do to fix this?

  Thanks for the help.  I actually did an update of the firmware and it solved the problem.

• LaserJet M1212nf MFP: Setting up printer blocked by the administrator

  Hey. I've updated to win 10 - now try to install the printer LaserJet have disabled Kasperski, but still get the msg: an administrator has blocked you from running this application. For more information, contact the administrator.
  Pls help.
  Thank you

  Good afternoon @Wogla777,.

  It is a great location for extra support! I see you are having problems installing the printer software. I'd be happy to help you.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
  
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  If you still experience this issue, it may be the user's profile. Create a new user and try to install the printer on this account.

  • Open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  • Click on manage another account.
  • Click on create a new account.
  • Install the printer on this account.

  To say thanks, you can click the 'Thumbs Up' and if the question
  is resolved you can click on the button "accept as a Solution.
  Please let me know the results. See you soon!

• LaserJet M1132 MFP: Error E3 on M1132 MFP

  Hello

  Please help, I get the error E3 despite the fact that I've changed the cartridge, made sure that all packages are cleaner, cleaned the iner part of paper, disconnected and reconnected several times.

  is there a way to reset?

  Thank you

  I beg of you. Where E3 is an indication of a paper jam (could make sense given the noises your description), try the procedure described here: remove a paper jam for HP LaserJet Pro M1130 and LaserJet Pro M1210 Multifunction Printer Series.

  If the problem persist, it would be better for you to call us.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

• LaserJet p1102w, windows 8.1, prints, but reports error

  My laserjet P1102W prints fine wireless, but an error every time.

  Yes, I reinstalled the latest version of the installation software. Yes, I tried printing doctor, he found nothing.  Yes, I downloaded and installed the latest drivers from that date.  Yes, I tried the tool which is supposed to find the latest drivers he, he did not support this version.  Yes, I looked at the ethernet configuration and it was fine - I'M able to print as I said.

  No, none of this has worked.

  I receive the error message in the upper right of the screen whenever I try to print.  All that says is that the printer cannot print the file.  Yes, this happens since the print spooler.

  So, what's next?

  Hi @draythomp,

  I see by your post that you are able to print on the wireless network, but you get a message error "the printer can print the file. You have successfully updated the software of the printer with the same results.  I can help you with this, but I need more information.

  This error appears when printing from any application?

  Meanwhile, empty folder of spool and restart the print spooler.

  How to clear the current print queue in Windows Vista and Windows 7.

  You also update the firmware of the printer?

  If this isn't the case, then I would update the firmware to see if this will help. This, although by a USB connection.

  HP LaserJet Pro P1102w printer drivers.

  Select your operating system, click Next, click the link for the firmware.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  Good day!
  Thank you.

• HP LaserJet P2055d driver

  I use a portable 64-bit windows 10. Recently I download driver, such as listed in the list. I couldn't theabove printer. I then change to other drivers who had PostScript, I had managed to get the printer to print but only almost a quarter of the page. The mistake that would keep that appears is "49 Err 3D910C8. The printer was asked to "turn off then turn on. The problem is not resolved.

  Pls advised.

  Hi Juissi,

  Thank you responded. If your printer has worked well, please click the "Accept as Solution" button below to mark your post as solved. Note: I am not a HP, but I hope that this solution to be share with all the world. Because in this forum, someone said that HP Laserjet P2055d/P2055dn/P2015,... all of them work with windows 7, 8 or 10 (he is very old) and everybody need replace new printer or pay certain amounts of money to solve the problem.

  Kind regards.

• I get "PAGE not FOUND" when you try to download the drivers for my Laserjet 1320N

  I am trying to download a driver for the HP Laserjet 1320N printer

  The link to my driver download page is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 18...

  But when I go here and click DOWNLOAD all I get the following error

  > > > > > > > > > > > > >

  This web page is not found.

  No web page was found for the web address:ftp://ftp.hp.com/pub/softlib/software10/COL9747/lj-27308-6/lj1320pcl6win2kxp2003vista.exe

  < < < < < < < < < < < <

  I tried it throughout the day. My internet connection is fine.

  Any help greatly appreciate

  Thank you

  esuerpgood

  SPOT ON!

  

• ColorMFP LaserJet M175nw 100: connect printer Laserjet 100 wireless

  Due to the recent DDOS acctack on servers DNS of Dyn Corp, it was recommended that all passwords and secret phrases on routers and Internet all devices be changed. I did this on all my devices and I'm successful with the exception of the 100 Laserjet Printer.  When you use the arrow keys on the printer to access the "network" Menu, I get a response indicating 'Access disabled Menu'.  I also have this same answer for the configuration of the system and Service.

  So I correctly uninstalled the printer and tried to reinstall it.  In doing so, I am only able to put in place as a USB printer and not a wireless printer.  Trying to set up as a printer wireless Configuration utility see the SSID of the router and then when he's in the Install utility installation fails.  I turned off and unplugged from the computer, printer and router and re-run the routine without success.

  In my view, if there is a way to set the default printer, it will disable the block on access to the "network" Menu on the control panel of the printer and then I would be able to configute the operation it's wireless.  I would also appreciate other possible solutions.  Thank you!

  Hello @burtech,

  Thank you for your participation in the Forums of HP Support! After reading your post, I see that you need to reset the printer. I want to help you with this issue today.

  I can provide reset for you in the product Monograph.
  In the forum next to our name to handle just click on the envelope
  to see it.

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!