Horizontal stripes LaserJet M1120n MFP

Similar Questions

• HP LaserJet M1120n MFP, Win7 64 bit, LAN

  Hello, it is possible Hello, it is possible to print via LAN to the printer HP LaserJet M1120n MFP of Windows 7 Professional 64 bit?

  I tried to use HP Universal Print Driver PCL6 and PCL5. Printer has been detected, but does not work. Document sent to the printer pool and that's it.

  About official support website is only the printer driver via USB.

  Thank you

  I found the good advice that works (with drivers for this model, not the HP Universal Print Driver)!

  "In the properties of the printer-port > uncheck"Enable bidirectional support"until the communication problem is resolved in HP driver."
  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-LaserJet-M1120n-MFP-does-not-print-int-Windows8-64bit/m-p/2737943#M49860

  Everything works fine, but I cannot print from MS Word 2013. I do not understand. A document is sent to the printer, the display is print status, but nothing... All formats of paper etc. are right. MS Outlook 2013 is right impression.

• where can I find a driver for the laserjet m1120n under win 7-64 bit print network?

  HP LaserJet M1120n MFP, CC459A, Windows 7 64 - bi t. No network printing since I have new laptop with Win 7 64 bit. I'm going to change printer too?

  OK, well, maybe there are even more options.  Not sure it will work, but try:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP LaserJet M1132 MFP prints not a remote desktop

  Hello

  I have a MFP HP LaserJet M1132 (number of product CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via the USB port. There is no problem with the printer. However, when using Remote Desktop connection (it is set to use the resources and local facilities, or in my case, printers and ports series) on the server (MS Windows Server 2008 R2), I can't even print a test of a remote office page.

  Error message: "print a test page failed. You want to display a tool to solve printing problems to get help? »

  But it does not anywhere as planned is access to the internet, and I've not had a MS Windows Server 2008 R2.
  The same error is for the HP LaserJet M1120n MFP.

  On my PC I installed another printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In two of these printers can easily print a test of a remote office page.

  Please help me.

  Thank you for your interest.
  The situation is a little different from the image. Windows Server 2008 R2 is available across the WAN. LAN is connected to the PC-1, 2 - PC and printer Konica Minolta. HP LaserJet M1120n MFP is connected through the USB port of the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC - 1 has access to Konica Minolta printer via the local network. PC - 2 also has access to Konica Minolta printer via the local network. PC - 2 is also available for PC-1 HP and OKI.

  It seems to me that I found the explanation for printing problems - some of 'my' printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:

  http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800D-2d9f-1f0c-225cabd6838e&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8DBB-9e95-11dc-3575d569acc2&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8D51-DCBB-7664cbc17a89&bCatID=1282

  I think I can close the topic.

  (translated from Polish into English using Google translator)

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n CONNECTED to THE NETWORK, SHOWS NO INTERNET CONNECTION

  HP Color LaserJet M277n MFP printer, is connected to the network and I am able to print and scan. During the attempt to get the HP Web Enable services in the Web services configuration page, it displays an error: "connection error, check the internet connection".

  After you enter the IP address of the printer in the browser, I am able to detect the printer. To enable printing of HP, but unable to do so finds out the above error. Tried a lot of things including re editing of. When I check the printer, it shows the proxy settings are required / incorrect, where, as confirmed by the supplier that they use the proxy server.

  Help, please.

  Hello @JljoThomas!

  Thanks for posting and welcome to the Forums of HP!

  I understand that you have a problem of activation of the functionality of web services on your MFP HP LaserJet Pro M277n. I'd love to help you with this.

  First of all, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause. Issues when connected to an uninterruptible power supply/Strip/surge protector power
  In this document you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector
  ↑ This is not limited to the Laserjet printers.

  If this does not resolve the issue, we are going to let the router and unplug the power cable (NOTE: do not reset the router...), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If you are still unable to connect to web services after trying these steps, we can try to set a manual DNS server of your printer to connect to.

  On the front panel of the printer, press the wireless icon. Select it wireless TO get the wireless summary. Do not your IP address.

  1. on your computer, open a Web browser and enter the IP address of the printer in the address bar. This will bring up the embedded Web server (EWS) page.

  2. at the top of the page, select Networking.

  3. in the left side, select Identification network.

  4. in article for DNS, under primary (IPv4) enter 8.8.8.8, under secondary (IPv4) enter 8.8.4.4.

  5. Select Apply at the bottom of the screen.

  6. try to activate the web services again.

  If it is still unable to connect, try to enter 209.244.0.3 for the primary (IPv4) and 209.244.0.4 for secondary (IPv4)

  Hope this helps!

  

• Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP

  You just bought a LaserJet MFP M127fn Pro and the document feeder makes a cracking noise. The copies come out blurred from the ADF. Sometimes, I get a message to mispick or paper the ADF is not detected

  Hey @MarthaContreras,

  Welcome to the Forums of HP Support!

  I understand that you feel the paper and quality problems when you use the automatic document feeder on your MFP HP LaserJet Pro M127fn. I would like to work with you today with the resolution of this problem.

  It sounds like this problem is a failure to roll in your ADF assembly. This can cause problems with the paper feed, paper detection and quality. Please follow the steps below to resolve this issue.

  Step 1: Check of power:

  Make sure your printer is plugged directly into a wall outlet for power. Power strips and surge protectors can cause printers lack power and will not work properly. To make sure that the power is not the problem, please connect your printer directly into a wall outlet and test the copy feature.

  Step 2: Checking for jams ADF:

  Any packaging, paper or debris that are stuck in your ADF may cause problems of multiple streams with all CAD on your printer. To ensure that this is not the case I can get you click here and browse the steps to ensure that no debris is stuck in the rollers of the adf.

  If the adf is free of all debris, proceed to the next step.

  Step 3: Check paper:

  Ensure that you are the copy, fax or by scanning ordinary white paper. Make sure that the paper is not creased or damaged in any way. Load paper carefully stacked in the automatic document feeder. Also, ensure that the paper guides are adjusted and the adf cover is closed tight.

  The printer will normally make a "ding" sound or display 'original charge' or "document loaded" on the display of your printer to show that the paper in the adf sensor detects paper as load. If no "ding" or "document loaded" message appears, remove your paper slightly and push back into the Assembly of the adf to see if you can trigger the adf sensor to detect the loaded paper.

  Once the paper is detected, please test the copy function to see if the study draw in evenly and prints a perfect copy. If the problem persists, please continue.

  Step 4: Checking Firmware:

  A programming failure or corruption on your printer can cause the material on your printer does not work properly. To make sure that you use the most recent Version of the Firmware programming on your printer, please click on the following link: HP LaserJet Pro MFP M127/M128 series Firmware update

  Once the site opens, select the download button in the upper left corner. Once completed the Firmware download to run. Follow the prompts on the screen to send the update of the Firmware for your printer.

  Once the update is complete, test the copy function again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• Driver for HP LaserJet M1005 MFP for Windows 7

  Could not find driver for HP LaserJet M1005 MFP for Windows 7 please help soon

  @jayadurgacranes

  This product is supported by a plug-and-play printing and scanning to the driver which can be found here:

  product page M1005

• LaserJet pro 177: bought used hp color laserjet pro mfp m177

  Installation disk arived broken. How can I do to replace it.

  Just upload what you want the site web theHP.

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

• HP Color Laserjet M277dw MFP: Cannot scan HP Color Laserjet MFP M277dw on Mac OS 10.6

  Hello, I can not scan to network drive using the above mentioned printer. Scan to USB key is possible.

  I downloaded the update (version 20160331) firmware image, but impossible to install the program. After double click, nothing happens. Any ideas?

  Thank you and best regards

  Christoph

  Hi Christoph,

  The printer is not compatible with Snow Leopard, it is supported on Lion (10.7) or later versions.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-Pro-MFP-M277-series/7089945/model/7089949/document/c04515051/

  The update of the firmware utilitywas not desinged for your operating system and therefore does not work on it.

  As the connectewd printer to a network, follow these steps to update firmware directly from the menu of the printer:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04517106/

  If the implementation of scan to a shared folder on your grave down Mac, please specify the exact error, and the parameters used (path of the shared folder used, etc.) also well done you have shared this folder your Mac form?

• Satellite Pro A300-28R - shows horizontal stripes

  My Toshiba Satellite Pro A300 sometimes displays horizontal stripes making the text unreadable images before portable crushes and I have to restart. Occurs usually when I'm on the internet. Does anyone know why this happens and how to solve?
  Once I rang Toshiba UK Technical Support and a rather impatient adviser said it was a discharge of static electricity problem, but why is it not with my laptop Pavilion?

  My Toshiba Satellite Pro A300 is less than one year, but the problem occurred repeatedly. I also had to replace the power adapter already because of the cable being too steep to the piece of cylindrical shape next to the Jack. Is this all I know a question of production with this series of laptops?

  > My Toshiba Satellite Pro A300 sometimes displays horizontal stripes making the text unreadable images before portable crushes and I have to restart. Occurs usually when I'm on the internet. Does anyone know why this happens and how to solve?

  These symptoms of display can be connected to a screen, graphics card driver or the graphics chip.
  First of all, you should try to update the graphics driver and should check it again.
  Secondly if this problem would appear then you must connect an external monitor to the laptop to check if the same would be visible on the external display.
  If so, the problem could be related to the graphics chip.

  It would be the worst case, a graphics chip cannot be replaced, but the whole mobo must be replaced in order to solve such a problem.

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• LaserJet m1132 mfp: what is the best fully functional LASER JET MFP with YOSEMITE

  Hello

  I have a hp laserjet m1132 MFP

  print and copy works fine but scanning produce a white sheet

  looked all over the web, but it seems that this function is not supported by the mac os x 10.10.3 yosemite

  so I need to buy a new printer (all-in-one)

  can anyone recommend a printer already tested with YOSEMITE and all the workers of the service

  scanning is a must for me

  Thanks in advance

  Hello

  Supported scan Yosemite for your printer, try analysis through Capture of Image,

  If it is the program that you want to scan to try to install the latest version of driver below:

  https://support.Apple.com/kb/dl907?locale=en_US

  Also I suggest to try the HP Easy Scan software and check if can provide best results year on year:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know if any of these steps can help you.

  Shlomi

• HP Color LaserJet M277dw MFP: I forgot password and admin user name

  I have a HP Color LaserJet M277dw MFP and I forgot the username admin and the password.  They were the two changed wwhen the printer was purchased. Is it possible to reset back to factory default admin/admin?

  Go to this web link, the instructions are there.

  http://ow.LY/Bbpy305fOQk

  rbogdan

• Unwanted fax confirmation pages for faxes received on HP LaserJet 1536dnf MFP

  I would like to disable the confirmation pages for faxes received on my HP LaserJet 1536dnf MFP but keep the pages of confirmation for faxes sent. How can I do this?

  It is not too difficult.  Press Fax Menu button.  Tap the right arrow until that fax reports is on display (should be the first thing that pops up), then tap OK.  Press the right arrow until Fax of Confirmation is displayed (again, it should be the first thing that pops up) and press OK.  Press the right arrow until you see Send Fax only and press OK.  Now you should be set to get reports of confirmation only when sending.  Hope that helps.