HP LaserJet M1536dnf MFP responds automatically faxes

Similar Questions

• HP LaserJet M1536dnf MFP stores the faxes to be sent the

  The company that I work has two HP LaserJet M1536dnf MFP Copier/printers-faxes. They are configured as basically the same that each related to its own line of ananlog fax. One of the machines is a continuous problem where it starts to store faxes instead of sending them.

  I went through all the HP troubleshooting documents. All settings have been verified. Firmware has been updated to the latest version. When I run the fax test via the service menu, always happens on all points.

  The machine receives faxes fine, but when you try to send a fax, it stores and never sends it. Following the troubleshooting documents HP, 02/11/12 I restored by default. After that, the machine was able to send faxes normally do not their storage. On 09/11/12 machine began to store faxes rather than send them again. Today, 15/11/12 I restored default again, and the machine is able to send faxes again.

  I have not the time to be constantly dealing with this issue. Why does the machine start storing faxes instead of sending them? How to prevent it from recurring? Should the machine be returned? Please do not direct me to a generic help document that I have already read. Thank you.

  I would contact HP directly on it. It may need to be replaced, or it may just need some deeper resets. Their Laserjet experts know that go with this problem. I would wait until the problem returns to the top to call, because they will tell you to do if you call while it works very well. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• Drivers to be used on networked computers that are not directly connected to the HP Laserjet M1536dnf MFP

  Hi, I had problems connecting to computers on the network for printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly via USB is fine. I downloaded solution complete driver installation on the site of hp, them and everything's fine. the problem is with the computers on the network, they cannot detect even the computer to add printer. And I have enabled file sharing and printer sharing advanced options of sharing on all computers. I also tried to install the same drivers I used on the local computer on the network computers, but its does not work. Please kindly advise me on which particular driver should I use or the solution.

  for this one, there was a simple solution... I forgot one small thing. After the installation of the complete solution from hp printer drivers on the computer connected to the printer via the usb port you then go to control panel > view devices and printers > click with the right button on active printer installed > printer properties > sharing > click on the list to the Director. that allows other computers on the network to view the printers.  was a bit stupid coz the solution was so simple.

• LaserJet M1536dnf MFP: It won't work

  I use this printer on a LAN port.  It appears in the network when I search for it.

  When I double-click the icon it installs automatically 2 drivers.  One of them has not installed whose name appeared as 'WSD printer driver' (something like that).

  It is strange because I have installed successfully on the other PC that is sharing the same network.  No matter how many times I reboot this computer, or remove and reinstall the printer in control panel it just will not work.

  More suggestion on what can I do?

  Hey @penguin97,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have some problems with your Windows 7 PC printing on your printer LaserJet M1536dnf. I can help you with that.

  Here's what we will do:

  1. If you have any software associated with your printer on this PC, uninstall it.
  2. Click on start and devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons printer listed.
  6. Automatically search for updates of Windows 7. Install all updates, not only the critical updates.
  7. Restart your PC.
  8. Download and install the latest drivers by clicking on this link.

  At this point, you should be able to print. If not, please let me know what happened following my directions.

  Please let me know if you are able to print or if you have other questions. If not, have a great weekend!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• HP LaserJet M1536dnf MFP

  I have a MFP HP LaserJet M1536dnf who has E-Print.

  My internet hub is in another room for my printer so they are not connected.

  Is there anyway I can print wirelessely without connect via USB to the computer or connect the printer to the hub?

  Any help would be great.

  Thank you

  Tracy

  Hello Tracy,.

  The requested ePrint service a network connection with internet access, connection via USB to a computer is not supported for ePring, a wireless network connection is not supported for the printer itself.

  You can connect to hub you using an Ethernet cable so ensure it have access to the internet, otherwise ePrint will not work.

  You can find out more information on ePrint in the following document:

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

  Shlomi

• LaserJet M1536dnf MFP: LaserJet M1536 don't not printing Mac laptop, all lit LEDs under LCD

  My LaserJet M1536 suddenly no longer print from my Mac laptop. And Yes, I downloaded the HP printer from the Mac App Store software was last updated.

  Under the LCD of the printer are three lights that stay on, even after that I power on and off the printer (the LEDs are green, the orange exclamation point and the orange point then). I don't know that the fact that all three LEDs remaining on the means, but it seems to be indicating a problem exists.

  Please help with advice to rectify or isolate the problem at least.  Thanks in advance.

  Do a google search, but the price will be high.  You can try a company call metrofuser.com because they can get a better price.  Good luck.

• HP Web Jetadmin 10.3 and LaserJet M1536dnf MFP communication error

  Hello!

  I followed http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=... , but no help.

  Any ideas?

  Thank you more, Alar.

  Hi and thanks!

  I have it. I got off WS-Discovery. =) Earlier, I corrected which... WJA has done well.

  Thank you more, Alar.

• HP Laserjet M1536dnf MFP / Installation on SP3 Win XP x 86

  After a long struggle and without success, I decided to post my problem here. During the installation of the drivers and scanning HP everything goes OK until step "Connect a device" appears. After several minutes to wait for a window with the fatal error message appear, indicating that the product may not be installed. Installation was cancelled. For installation, an original CD as well as the latest version of the drivers were used. The same result without success. In addition, troubleshooting of HP has been applied, which means that all startup applications and services with the exception of Windows services and applications have been disabled. Then after restarting a facility began with the same result. One last thing to add. During a connection device, Windows installs drivers. And the only available option is an impression (copy worked, of course, all the time). I would be grateful for the help, because no more only solutions.

  P.S., HP Print and doctor Scan has been tried. Scan test was chosen. The program has lead me to the HP support on the first try "pilot" sorry for the few grammar errors

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/Laser-Jet-1536-DNF-installation-problem/m-p/1087889#M43766

  I found this on a different post that addresses the same issue & point.  I tried on mine and it worked the first time.  Try it and give it the Kuddos.

• HP LaserJet M1536dnf copy of the automatic document feeder

  HP LaserJet M1536dnf MFP

  FW version: 20130114

  I load the paper in tray and press copy ADF on the front panel button.

  Once this UPM retrieves the document, it crosses all the way to scan and UPM returns to ready state without printing anything.

  Copy in the same way to scan flat ends with a scanned copy of printing as usual.

  I suspect that the problem of Firmware.

  Any help?

  Hi, Jason
  I think you forgot to mention what buttons I have to hold in the power of the UFM.
  I did re-init procedure (hold right + Cancel when power on) and reflashed latest firmware. It did not help.

  If I do a search with the ADF, the printer tries to print anything. UPM simply returns to the ready state after the end of the analysis.

  Update:

  It seems that I fixed it.

  I did the procedure exactly as Jason suggested, but when I checked whether the problem is resolved, UPM did the same, scanned and returned to the ready state without printing anything.

  After that I did hard reset again, then immediately I did again the procedure to reset internal memory

  Spoiler (Highlight to read)

  (Turn off the UPM, press front panel and hold right + Cancel buttons, power on UPM during their detention, let them go after the LCD displays "init memory" and wait as UPM to ready state.)

• LJ Pro M1536dnf MFP: is more duplex

  My LaserJet Pro M1536dnf MFP stopped automatic duplex printing. Once I choose duplex printing and rather fo print on both sides of the paper, the document was printed recto with each page on a sheet of paper. I tested and it will do is more duplex copy either.

  I didn't hear unusual noises or get the error codes.

  Any ideas?  Others have the same problem. Other that this question is a great printer, especially for the price.

  This printer is a replacement guarantee for one who stopped duplexing while in warranty period. The first unit duplex copies always worked.

  Hi John_Mrtz ,

  Thanks for letting me know.

  You can go only with firmware updates. You can rerun the update of the firmware, but probably it will show that it is already updated. I tried the same exact setting, that you used in the laboratory for the Laserjet M1536 and he did the double-faced properly document. It looks like a hardware problem with the device. I am surprised however that the test internal printed duplex test page.

  There is still one thing that we can try reset the printer back to factory settings. I can send you this information in a camera
  Message. In the forum next to your handle name simply click on the envelope to see.

  Thank you.

• Unwanted fax confirmation pages for faxes received on HP LaserJet 1536dnf MFP

  I would like to disable the confirmation pages for faxes received on my HP LaserJet 1536dnf MFP but keep the pages of confirmation for faxes sent. How can I do this?

  It is not too difficult.  Press Fax Menu button.  Tap the right arrow until that fax reports is on display (should be the first thing that pops up), then tap OK.  Press the right arrow until Fax of Confirmation is displayed (again, it should be the first thing that pops up) and press OK.  Press the right arrow until you see Send Fax only and press OK.  Now you should be set to get reports of confirmation only when sending.  Hope that helps.

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.

• Automatic document feeder stop working on printer HP M1536dnf MFP

  Hello.  The automatic of the document (BAA) on my all in one work suddenly quitting coppier.  I cleaned but still nothing.  When you set up a sheet of paper in the tray and it depresses the lever on the power head, he normally had a message like 'paper' on the LCD display.  Now, nothing.  I thought that the driver's head may have failed so I replaced it with a spare that I had but this diddnt help either.  I'm not sure why the ADF will not work, but it turns out quite invonvieiant for my work. If anyone has had this problem and if so, were you able to fix?  Thanks in advance.

  

  Model HP Laser Jet Pro M1536dnf MFP

  Hey @MarioFleecy,

  If the NVRAM reset on your product could not solve the problem with your ADF, then the next step would be to maintain the product that we have exhausted all the troubleshooting steps.

  I would recommend calling HP support and inform the agent of all the steps that we've come for troubleshooting. When you do that, you will be able to discuss what alternative options are available.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Good luck!

• Color Laserjet MFP M277dw Pro: fax to pc

  I can't find how to send my received faxes directly into a folder on my desktop.  Any suggestions?

  Hey @ElmacRD,

  Welcome to the Forums of HP Support!

  I understand that you do not want to receive faxes on your computer Windows 7 of your HP Color LaserJet Pro MFP M277dw. This Laserjet model has no possibilities of digital repository. This means that you cannot receive Fax on the printer itself into print. The only option of PC has this product is to send faxes from your PC.

  Options for fax sending and receiving your product be found in the User Guide. You can find all fax options for this model of printer on the User Guide pages 65-78 .

  Please let me know if this information was useful!

• Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP

  You just bought a LaserJet MFP M127fn Pro and the document feeder makes a cracking noise. The copies come out blurred from the ADF. Sometimes, I get a message to mispick or paper the ADF is not detected

  Hey @MarthaContreras,

  Welcome to the Forums of HP Support!

  I understand that you feel the paper and quality problems when you use the automatic document feeder on your MFP HP LaserJet Pro M127fn. I would like to work with you today with the resolution of this problem.

  It sounds like this problem is a failure to roll in your ADF assembly. This can cause problems with the paper feed, paper detection and quality. Please follow the steps below to resolve this issue.

  Step 1: Check of power:

  Make sure your printer is plugged directly into a wall outlet for power. Power strips and surge protectors can cause printers lack power and will not work properly. To make sure that the power is not the problem, please connect your printer directly into a wall outlet and test the copy feature.

  Step 2: Checking for jams ADF:

  Any packaging, paper or debris that are stuck in your ADF may cause problems of multiple streams with all CAD on your printer. To ensure that this is not the case I can get you click here and browse the steps to ensure that no debris is stuck in the rollers of the adf.

  If the adf is free of all debris, proceed to the next step.

  Step 3: Check paper:

  Ensure that you are the copy, fax or by scanning ordinary white paper. Make sure that the paper is not creased or damaged in any way. Load paper carefully stacked in the automatic document feeder. Also, ensure that the paper guides are adjusted and the adf cover is closed tight.

  The printer will normally make a "ding" sound or display 'original charge' or "document loaded" on the display of your printer to show that the paper in the adf sensor detects paper as load. If no "ding" or "document loaded" message appears, remove your paper slightly and push back into the Assembly of the adf to see if you can trigger the adf sensor to detect the loaded paper.

  Once the paper is detected, please test the copy function to see if the study draw in evenly and prints a perfect copy. If the problem persists, please continue.

  Step 4: Checking Firmware:

  A programming failure or corruption on your printer can cause the material on your printer does not work properly. To make sure that you use the most recent Version of the Firmware programming on your printer, please click on the following link: HP LaserJet Pro MFP M127/M128 series Firmware update

  Once the site opens, select the download button in the upper left corner. Once completed the Firmware download to run. Follow the prompts on the screen to send the update of the Firmware for your printer.

  Once the update is complete, test the copy function again.

  Please reply to this message with the result of your troubleshooting. Good luck!