Unwanted fax confirmation pages for faxes received on HP LaserJet 1536dnf MFP

Similar Questions

• hp laserjet 1536dnf mfp scanner installation of the product for Windows XP 64-bit

  We have upgraded my computer to Windows XP 64-bit.  I can install the printer drivers for it, but have been unable to install the scanner software.   Can you direct me to the correct installation page to do this?

  Hello

  I'm afraid that the printer is not all supported on Windows XP 64-bit edition, but you can still be able to print using HP UPD, you'll be able to get a further on the specific OS envoirnment.

  64-bit operating systems are supported only on the new operating system (Vista or higher).

  You can find the specifications of the product below:

  NOTE:This product does not support Windows XP Professional x64 Edition, Windows 2000, 95, 98, 98 Second Edition, ME, 3.1, NT 4.0, 2003 server (64-bit).
  

  http://support.HP.com/us-en/document/c02219779

  Shlomi

• I need drivers for a printer HP laserjet 1536dnf mfp Setup

  I need drivers for a HP laser Jet mfp 1536dnf

  Go to HP website and download it.

  Good luck.

• Fax Confirmation page

  How can I configure the HP Officejet 6500 E709a printer/fax to print a confirmation page for faxes that I send?

  Thank you!!

  Hi kalexan963,

  It is easy to set up. Just go to the installation (on printer) > print report > Fax confirmation > on Fax Send

• HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. -Fax Confirmation Page

  I have the HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. It works very well, but how to make a page of confirmation by fax, with the impression of a miniature of the 1st page of the document I sent?  I checked the configuration information, but apparently not have indications confirm that I sent the fax through the confirmation page with a small impression.

  Hi dtaylor569,

  Follow the instructions below.

  To activate the fax confirmation
  1. press the arrow to the right and select Setup.
  2. press on the configuration of the fax, click Fax reports.
  3. press on the Confirmation Fax.
  4. tap to select one of the following options.

  • Discount - does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
  • (Fax Send): Prints a report of fax confirmation for each fax you send.
  • On (fax) - prints a report fax confirmation for each fax that you receive.
  • On (Send and Receive) - prints a report fax confirmation for each fax that you send and receive.

  Prints a report of fax confirmation for each fax that you send and receive.
  To include an image of the fax on the report
  1. press Setup.
  2. press on the fax, click Fax of Confirmation reports.
  3. tap on (fax) or we (send and receive).
  4. press on the Fax Confirmation with the image.

• Confirmation page when faxing directly from the printer, but not when fax from a computer in network

  I have an Officejet Pro 8600 more network (using the wireless) all-in-One.

  If I fax directly from the printer (using scanning and fax), I receive a confirmation page.

  When I fax from my computer in a network (using the 'Fax - Hp Officejet Pro 8600 (network)' pilot), the status display shows 'composition', 'connection' and 'send '. However, no confirmation page is printed.

  How can I set up the printer to publish one page of confirmation if the fax printer OR my computer using the wireless connection?

  Thanks for your help and your time.

  Planckster

  Hi Planckster,

  A report by Fax of Confirmation is an available option when sending the device itself.

  When sending a fax from your PC, you can find the most recent history of fax by opening the HP software.

  Click on manage the Fax setting, and click Fax history.
  The screen list a report on the recent work of fax, a printed report is not an option for this task, however.

  Shlomi

• Need a Confirmation Page after a FAX?

  Never a fax "reception"? When you send a fax, there is a way to get a page letting you know where and when you sent it.

  You will NOT be able to get a PAPER COPY of what you sent.

  The confirmation page can be printed on the elements SENT or RECEIVED, or BOTH.

  The steps would be:

  1. go to printer settings

  2. choose REPORTS

  3. go into the FAX REPORTS

  4. power on (SENT, RECEIVED, or both) according to what fits your criteria.

  On some printers, your fax settings may be available when the numeric keypad is displayed:

  1. go in the fax settings

  2. choose the FAX REPORTS

  3. choose FAX CONFIRMATION

  If you have any questions please ask.

  I hope this helps.

• HP Officejet 4630: Officejet 4630 fax confirmation Page

  Y at - it a setting or another way for 4630 Officejet to print a confirmation page after each fax stating if the transmission has been sent or has failed

  Hello

  Yes fax confirmation can be printed on all sent faxes. Please follow the steps below.

  Setup menu > Fax > settings > Advanced Setiings > Fax Confirmation > check the required option.

• How can I get my Hp officejet 6700 to print the date and time on the fax confirmation page

  How can I configure my officejet 6700 premium to print the date and time on the fax confirmation page?

  Hello

  As long as the date and time is set, it should automatically appear on the print.

  Is the date and time set correctly on the printer?

• Journal of unwanted faxes to Officejet J5750

  Unfortunately, I asked this question before but I got one solution, but it did not work - I unplugged the power cable to the back of the printer and turn it back on without a change in the result.  Back in June 2012, I indicated that my Officejet 5750 printer has been printing newspapers unwanted fax for me... I get these faxes daily and sometimes more than once a day.  The fax paper publishes the last transaction.  All others I have received have a result that says "no fax": I have a PC, windows 7. Here is an example:

  FJournal of the ax:

  (my name)

  my fax number

  _ _30 July 2012 14:15 (time now)

  NOTE: Blocked calls are not displayed on this report.

  For more information, see the report of Junk Fax and the Caller ID history report

  Last Transaction

  Station time ID result Pages

  Type of display date time

  ____________________________________________________________

  25 Jul 17:00 received 0:45 0 fax No.

  16266677722

  Or otherwise the caller ID would look like: 10000000000

  Thank you.

  Hi tiapoo,

  Follow the steps below to turn off the fax confirmation reports.

  Print fax confirmation reports

  If you need printed confirmation that your fax is sent successfully, follow these instructions to enable fax confirmation before to send faxes. Select The Fax to send or send & receive.

  The default setting of confirmation by fax is turned off. This means that the HP all-in-one device will not print a report of confirmation for each fax sent or received. A confirmation message stating that a fax has been sent successfully appears briefly on the screen after each transaction.

  To activate the fax confirmation in the Panel

  1. press Setup.

  2. press 2and press 3.

  This selects print report , and then Fax of Confirmation.

  3. press to select one of the following, and then press OK.

  • Off Does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
  • Send the fax Prints a report of fax confirmation for each fax you send.
  • Receive faxes Prints a report of fax confirmation for each fax that you receive.
  • Send & receive Prints a report of fax confirmation for each fax that you send and receive.

   

  TIP: If you choose on Fax Send or send & receiveand analyze your fax to send memory, you can include a picture of the first page of the fax on the report of Confirmation sent by fax . Press Setupand press 2, then press 2 . Select on the menu Image on report to send faxes .

• Pro 8500 more send faxes received to my email

  All my incoming fax used to be sent to my email address, now no more? Can U help please?
  
  Stannie

  Hi Stannie,

  The following assumes that you have installed full feature software AND that the software is fully functional.

  Excerpt from Page 50 of the User Guide:

  Set up the scan to E-mail

  You can use the printer to scan documents and send them to one or more email address
  addresses as attachments, without additional scanning software. You don't need to
  analyze the files on your computer and attach them to e-mail messages.

  NOTE: If you use the HP Officejet Pro 8500 a (A910a-f), you can only use
  Scan to network and Fax folder in network folder. To find your model number,
  See the printer model number.

  To use the e-mail scanning feature, perform the following steps:

  Step 1: Define the profiles of outgoing e-mail

  Configure the e-mail address that will appear in the FROM part of the e-mail
  message sent by the printer. You can add up to 10 profiles of outgoing e-mail. You can
  Use the HP software installed on your computer to create these profiles.

  Step 2: Add e-mail addresses to the e-mail address book

  Manage the list of people to whom you can send e-mail messages to the printer.
  You can add up to 5 e-mail addresses or groups of messaging, as well as their correspondents
  contact names. To add e-mail addresses, you must use built-in Web printer
  Server (EWS).

  Step 3: Configure other e-mail options

  You can configure the SUBJECT and body text by default which is included in all e-mail messages
  messages sent from the printer. To configure these options, you must use the printer
  EWS.

  Step 1: Configure outgoing e-mail profiles

  To configure outgoing e-mail used by the printer profile, follow these steps
  your operating system.

  Windows
  1. open the HP printing software. For more information, see software HP printer
  (Windows).

  2. double-click on shares of Scanner and then double-click Scan to e-mail Assistant...

  3. click on new and then follow the instructions on the screen.

  =======================================================================

  EWS designates the embedded - Web server read about it in your user's Guide.

  It is a Web page interface, that you can use to control and interact with the installation program and the features of your printer.

  You can open the built-in Web server in your favorite browser:

  • Open the browser at a blank tab / print this page
  • Enter the IP address of the printer such as the address of the Web page.

  for example

  Enter 192.168.1.16

  and the browser will open the Web page for your printer at http://192.168.1.16/

  Don't forget, the address IP of YOUR printer will be different.

  =======================================================================

  Click on the thumbs-up Kudos to say 'thank you '.

  While I strive to reflect best practices of HP, I do not work for HP.

• HP j4580 fax receive

  I set up my HP to store faxes received on a folder on my PC. How can I configure this machine DO NOT print all incoming faxes at reception.i am on win-7/32 bit

  Thank you

  looks like the answer to that is in front of my eys! Just read the printer digital Panel... Yay for me...

• HP Officejet Pro 8715: eliminate unwanted faxes

  I recently bought an officejet pro 8715.  I want to eliminate unwanted faxes.  But many shippers send the fax with the fax number not identified.  (I can't block these faxes unidentified).  I want to store all the faxes on the 8715 and then post them on my computer before printing.  In this way, I only print the faxes that I want.

  Can I do this?

  Harold681

  Hey @HAROLD681, welcome to the Forums of HP!

  You can certainly store your course of phases on your computer and print the ones you choose to print. Information and instructions to configure the functionality of digital fax begin on page 10 of the user manual.

  If this solves your request please click accept button Solution below to mark your post as solved. If there is something else I can help with that let me know. Thank you.

• All-in-one Officejet J6400 Fax receive not always or not at all

  OfficeJet J6400, Vista.  Connected to the laptop via cable and wireless.  It is connected to the same phone number line, with the answering machine.  Settings seem correct and even when I had previous HP printer.  4 rings on the answering machine pickup and 6 rings for fax receive.  The fax does not receive.  Even if auto answer is on.  I am able to fax, manually. (have not tried otherwise)

  I have to figure out how to keep the auto answer on vs switch mode 'sleep' (of another post).  But sometimes it is not in Standby Mode and AutoA is off.   Regardless, machine does not seem to take faxes.  BUT, when you do the test with HPFaxme, it doesn't work. !

  And, when you use the HP Solution Center, all settings are made, and sometimes their fax Test does not work.

  Another question... in Fax configuration, which is PC modem in this question in quotes?  It's same as router? -"Are you using a PC modem (to access online services) on the same phone line as the device HP?   Answer is Yes or no.  Which is mine?

  I don't have DSL, and fax is on the same phone line. I have a DSL filter connected to the wire, of course.  Another wire goes from phone line in the wall (there is a separator) to the router.  This configuration refers to highest question?

  Is the best connection wireless or cable (printer for laptop)?

  Thank you!

  I'm back earlier than expected.  I never ran any patches of the HP link because another action (s) would have helped (which is recommended for another problem I had).

  So-

  I had the printer connected to the laptop via a USB connection and network.  (wire cable between the printer and the laptop and wireless through the printer setup)   Due to many problems to make the light stays on 'Auto response' (I posted on this separately in the recent past), I have the settings Fax arranged in a strange way to make this work.  So I didn't want to change these settings, what would be the recommended link for me to do.  For the problem of the 'auto response', I ended up connecting computer to the printer via the cable. And that probably contributed to this problem.

  I kept the two connections since and chose USB (OfficejetJ6480 copy1) wire as my setting of the printer preference in the settings box of the printer in Control Panel.  I think that even when I did the Wifeless-network connection preferably in the settings area of the printer in the Control Panel, the receiving fax machine or tests do not seem to work (even if it was some time ago and not tried recently).

  I think the duplicate connections was things confused.  The fax Test seemed to spend during a test of the printer settings button.  But he would not pass when the test has been made Fax Tools in the Solutions Center on computer. (And this I tested it today.)

  SO, I deleted the wireless network connection and the "device" (officejetJ6480) in the settings of the printer in the control panel.  I simply removed it.  I have left the "copy1 OfficejetJ6480" intact and continue the preference for the 'peripheral '.

  I have rebooted computer and run Fax Test of the printer and printer Solutions Center on computer configuration tool.  And they both passed Test.  Go figure.

  And also, the test of HPFaxMe works very well.    Thus, 3 tests have passed. !

  I hope this will be useful for someone even if it is confusion.

  But I'm sure that one of the hotfixes in the MissTeri link should help too.

  Thanks MissTeri!

• I can see only the last fax received in my PC and not all of them using an Officejet Pro 8600 Plus

  I create a file in my office where received faxes can be saved. Indeed, I can see the fax received, but if I get one more, it replaces the previous one. So, I see only the last received fax. How do I see all of them and does not replace another?

  The problem was that I didn't set the time on the machine of the printer.   I just put the date and time and the problem solved. I get faxes pdf correctly.  Be it, thanks for the help!