HP LaserJet P1006
Cannot print. Download the paper for the error message jam & no ink cartridge. There is no paper jam. There is an ink cartridge that is full. I unplugged my printer and taking my computer, waited a min or so plugged again. Still getting red flashing on the printer and the same error message.
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.
Good luck, you need to update or reinstall the latest driver.
HP LaserJet P1006 printer - drivers<- set="" to="" your="" version="" of="">->
HP LaserJet P1006 Printer - support and troubleshooting
HP support/troubleshooting & drivers
The main issue is probably the drivers, but these can help:
Add or remove a printer
Solve printer problems
Open the printer Troubleshooter
Find the manufacturer's Web site
Find and install printer drivers in Windows 7
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
I have an impossible to correctly print #6 3 / 4 envelope using WordPerfect X 7 (Version 220.127.116.116).
I use a HP LaserJet P1006, with 10 Windows HOME 64-64-bit. I manually added the #6 3 / 4 paper size envelope in the box size Options paper preferably print and the Print Server preference box. A test page will print correctly, just like a #10 envelope. At #6 3 / 4 print attempt, impressions as if an 8.5 x 11 sheet of paper, with addresses in the lower let of the leaf, properly oriented.
The properties of the printer are as follows:
IMF data format
HP1006PrintPro print processor
Windows x 64 operating system environment
Name of driver HP LaserJetP1006
Of Type Type3-user mode driver
1.02.2680 driver version
Additional printer driver files
Although I could not use Notepad or WordPad, I can save the document in PDF format and print the envelope in PDF format from the Viewer.
Thank you for your help.
I use Windows 7 64 bit and I wish I could for my LaserJet P1006 ePrint. the computer is on a network of residential group and the internet constantly. I see there are updates of firmware for some HP printers, but my printer is not listed.
y at - it's going to be or are there updates for my printer?
Your printer's specifications indicate that your printer does have that USB connectivity, so won't it be able to use e-print. There may be some Retrofits future firmware for the printer, but none that can upgrade the connectivity.
You will find the lsit of printers from HP web active here.
From my HP LaserJet P1006 to connect to my wireless router's USB port. When I tried to print my computer went on the Net to download the printer driver. I tried to print again. I have received the print dialog box, choose the printer that was connected to my wireless router and clicked the button 'print '. HP printer app starts and indicates that the page has been completed but the printer just sitting there with no output and no error message on the computer either. The printer works fine when I print from my MacBok Air. What Miss me?
1 HP LaserJet P1006
2. Mac OS x 10.5.8
3. no error message
4 just installed printer
What brand and model is the router?
It sounds like the issue is isolated on a Mac system because it runs from the other.
Reset the Mac printing system exactly as described in this document from Apple.
Then, install the HPstar driver. This package includes support for OS X 10.5.
This should reset the printing system and remove any software that may be cause of conflict.
I used to be able to print wireless from my macbook Pro (OSX 10.8.3) on my Laserjet P1006.
I can still print if I connect via USB, but as soon as I unplug the window ' print and scan "says that my printer is offline.
I was inbetween print jobs when printer suddenly stopped allowing my computer to print wireless. There was nothing that I could see that he would set.
I tried to stop (computer and printer, same wireless router) and turn it on again.
I tried showing computer not to retain printer... then you reconnect with USB to recognize as good as new. That did not work.
I tried to follow the instructions for MAC and for this specific printer to a post someone else the fact, but the instructions meant to hit utility from the 'Open Print Queue' window and I did not have this option. He also says to look for Hello, I don't ' have that option.
I'm wiped out.
How can I return my wireless connection?
Teh Laserjet P1006 is a single USB printer and does not include any wireless connection:
Can you connected the pritner to a print server (a port on a router, etc.) in the past? specific model of said does not support any connection without using a USB key.
Cannot get Windows to recognize the P1006 8.1. It worked fine in Windows 8.
So when I try to uninstall the driver, I see that the driver is not listed in "Programs and features", or the printer is in "Printers" in the Panel.
How can I uninstall the driver to reinstall if it does not appear anywhere?
It seems that the print driver usb support is not fully install correctly.
We will have this resolved yet.
See if the printer will print a material as self-test.
While the printer is turned on, open and close the lid quickly five times.
It should display a page with black lines on it.
I would like to know if it printed?
With the printer still connected to the computer, return to Device Manager and see what it shows listed for the printer. Example, another unknown device, under universal bus controllers does show the usb printing support?
Let me know.
Try to enter the computer, windows, program files or program files x 86, hp, laserjet p1006 to see if it is listed. If it is not open the folder and run the full uninstall from there after disconnecting the usb cable.
Reinstall the driver downloaded again.
Let me know all this, so I can help you better.
I can't get my desktop Mac to recognize my LaserJet P1006 since update today in Yosemite. Help!
Welcome to the Forums of HP Support!
I see that you want to install your Laserjet P1006 Pro on your new Mac OS X 10.10 Yosemite operating system. However, currently there is no driver because of the age of your product.
The only option would be to try to use the Apple Software Update to see if it recognizes your product at all. However, currently HP no evidence that your product has any driver for Mac OS X 10.10 support.
If you want to try the mode of installation of your product Apple software updates, you can find detailed instructions in the following document:
Yet once, it is not guaranteed to work.
Please let me know if these steps don't resolve your problem. Good luck!
I have a new computer that is runnins win8.1 and the word 2013.
I installed my Laserjet P1006 and seemed to work fine until I tried to print labels and envelopes.
With one of these it won't mrecognise the manual feed tray. With labels I put on paper, the sheet of labels into the tray paper and envelopes it tells me to insert the envelope and press 'go' to print. At this point, nothing happens until a few seconds later it still tells me to insert an envelope and press 'go '. I don't know how many times it repeats that I turn the printer off at this point.
The envelope is in Quebec and cannot be deleted!
I tried everything I can find in this blog and so far nothing works.
Appreciate any help.
Your printer is on the following list:
Please use the instructions (in there) to install the drivers correctly.
I got this free Laserjet P1006 and it has vertical lines on the page. See attachment. How can I clean printing?
The test at Midway:
Swap the toner cartridge, the merger or the drum as a result. A verticle like this issue is usually the result of a however bad toner cartridge.
I want to run or install my HP Laserjet P1006 printer to work on my system without the software freely, I have misplaced the software please I need your help.
You can download the software here:
When released drivers for the laserjet p1006 for windows 8 pro 64-bit? I have a printer which i cannont use...
Passed Windows 7 32-bit to 64-bit Windows 8, had all the problems mentioned above, trying to install Laser Jet P1006. Downloaded and installed Windows 7 64 bit P1006 drivers from HP web site, hp_LJ_P1005_Full_Solution_Row.exe, and ljP1000_P1500-HB-pnp-win64 - in .exe. Had to install both in the order listed above, printer would not work with a driver in itself. Printer works like a champ, can't install the new 64 bit drvr Win8 when (if) HP comes out with it.
Update: A worked well for a week, out of nowhere the same document is sent to print twice, one showing file size, a display 0 kb to the size of the file cannot be deleted 0 kb file without unplugging the printer and restart the computer. May have to do with the installation of Office 2010. Back to the drawing board.
Update 2: after failing to uninstall driver, used HP print and Scan Doctor in order to get the docs on the queue, and how 'delete device '. After that, couldn't find no port selected in "Print properties", I use the usb port 2, but was not yet registered, usb 1 was for my other printer (Lexmark). Computer restarted, a second icon p1006 printer/device manager, was listed usb port 2 and was selected. Printer worked. Uninstalled first icon legacy p1006, unfortunately the two p1006 icons disappeared. Computer restarted, windows detected printer and installed, p1006 icon reappeared in Device Manager, usb still selected as port 2. At the moment the two printers work. All I have to ' do now is of fig on the flag "yellow" on my pc modem... 8 windows aah.
1. recently installed Office 2010. In previous versions of windows and Office, had a similar impression of the problems with the hp laserjet p1006 queued default printer. The fix was to choose Microsoft XPS Document Writer as default, and then select the printer that I want to use in the program when I tried to print a document. Even once just in case.
2. having two HP printers (for example a deskjet and a laserjet) downloaded on your computer causes all sorts of problems of print queue. Has to do with both printers using common files. HP has ever imagined a fix for what I know (haven't checked lately), so if you have an HP printer that is installed, and you want a second printer, you have to buy a different brand as Lexmark for your second printer printer. Suppport from HP will talk about common files, but not on the installation of a different brand printer, then you will have to take my word for it that it works.
I have a problem with manual duplex printing on the Laserjet P1006 running Windows Vista. I have multiple accounts configured in Windows. When I print using the account that installed the printer, everything works fine. When I try to print to another account, the prompt that asks you to click continue to print the 2nd side of the paper just has a button closure instead of a button to continue on the bottom. To confirm the problem, I uninstalled the printer and then reinstalled on another user account. Now, my account not manual duplex, but the other cannot. Does anyone have a solution to this problem?
Ah ha! I have a better workaround (at least for my situation; if all goes well it will help others too)
At first, after reviewing the issue of original posters it dawned on me that if I could just install the driver as a normal user (not Admin) then it should work as long as I'm logged in as a normal user (I'm the only user on this computer). But unfortunately I don't have the ability to install unless I run as administrator, so no hope there.
So here's the real solution (for XP users, at least): after installing the driver as an administrator, you must open the "Printers and faxes" window as an administrator. (There are a number of ways to do this. One way is to run Windows Explorer as administrator and then go to the desktop and on the side panel, there should be a link to the control panel. Open and then click on printers and faxes.)
Now select the printer, right click and choose Properties, then select the Security tab. Under "group or user names", select everyone. In the permissions window, check all the buttons 'Allow', then press on apply. (While you're here, you might also click the "Device settings" tab and confirm that the checkbox "allow manual Duplexing" is checked.)
For me, which did the trick.
The advantage is that, before I was also not able to save any 'Print task Quick Sets' in printing preferences of dialogue (unless I was running as an administrator), but now I'm able to do the same.Message edited by kmote 03/11/2009 10:09
After you install a HP LaserJet P1006 printer I can't complete the installation beyond the point of connection of the USB cable from the computer to the printer. At this point, everything freezes up.
Go to the HP website and download the latest software and drivers for your printer and the OS version. I think that this should be your printer:
I hope this helps!
I just need software installation for the HP Laserjet P1006 for OS 10.8 Mountain Lion. The CD that was originally used does not work for the Mountain Lion. I have only a different HP printer on the network (OfficeJet Pro 8600) and need to reinstall the software to make the HP LaserJet P1006 working again. The original driver software has been deleted inadvertently. I have bee through the Support pages, but no address this particular issue.
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
I got a HP LaserJet P1006. They won't let me install. I just got a new pc. and I was installing in the new pc... It of getting so far and keep coming back me and I do and then click Next. Then her ' tell me to go back...
What is you get the exact error message?
You have the required drivers for the printer?
If you have problems installing a printer, or if you have added a printer but are unable to use it, you need to maybe install or update the printer driver so that it is compatible with the version of Windows you are using.
Some drivers that come with Windows, are available through Windows Update, or are registered on your computer through the hardware installation process and are ready to install. In other cases, you will need to install the drivers using a CD or DVD provided by the manufacturer of the printer. To install these drivers, follow the steps to use the Printers folder. If the driver you need is not already stored on your computer or if you do not have a CD or DVD, try to search the website of the manufacturer of the printer to see if you can download and install from there.
I recommend you go through the manual supplied with the printer first. The manual includes the steps that will lead you through the installation process.
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software Internet.
Find and install printer drivers
Let us know if this helps
Maybe you are looking for
New Toshiba L300D - 13s computer laptop probBought a new laptop for my wife for Christmas This has now happened twiceAfter being on for about 30 minutes writing an e-mail, a notice appears "your time has expired, please login again" all is lost!Are t
Hello people of the forum, Hoping to get a pointer to what's wrong with my laptop here, confusing me at the moment. survey of my screen 3 days ago and it was if it was in mode 'sleep', I'd shut down the previous night properly, in any case, he tried
When I go to start - turn off computer - Windows Explorer error display, I can choose what I want to send the report or not, when I click on don't send, computer is not closed, but returns to displaying the desktop,.If I again go to start - turn off
My don't on my Sony Vaio VGN-SZ670N hard drive died and I have no other choice in replaces it. The new drive has no operating system, and I don't have a recovery CD. I have my Microsoft for Vista 7 key information as well as my Office Professional
Hello We have a LAB with Cisco ISE, certificates and list DACL. Everything works fine with the 1.1.1 version but now we want to use the functionality of CMS - SGT instead of the ACL and we found that we need seed for this device and the only device t