HP LaserJet Professional P1102w - cannot activate ' service web hp.

Similar Questions

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Dell XPS 8500: LaserJet Professional P1102w - problem printing envelope

  Recently I had to change my router, which has led to this wireless HP printer reset, and now the envelope printing function does not work.  The broadcast for the envelopes window is in Microsoft Word, but when I click on print, an error message appears in the status area of monitor that says: "this document does not print" and a red dot on the printer flashes.  Any ideas on what settings to check/change if you print envelopes works again?  Thank you!

  Hello

  You may need to reinstall the printer driver on the PC, like the printer probably got a new IP network with the new router.

  http://support.HP.com/us-en/product/HP-LaserJet-P1100-Printer-series/4110394/model/4110306/drivers/

  Alternatively, you can just go to your control panel > devices and printers > add printer and select your wireless printer, since you probably already have the driver on your system.

• Why can I not print my RT Surface on my HP LaserJet Professional M1212nf MFP docs?

  Why can I not print my RT Surface on my HP LaserJet Professional M1212nf MFP docs?

  Hello again RamiNoujaim,

  To use a printer on the RT Surface, it must be installed first. These links may help:

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  http://answers.Microsoft.com/en-us/surface/Forum/surfwinrt-surfdevice/how-do-i-print-to-HP-LaserJet-professional-P1102w/bbd1dc67-CD90-457a-9557-7b9202019939#LastReply

• HP LaserJet Professional P1606: HP Web Services Installation - connection error. Check the Internet connection.

  I try to activate the Services Web of HP but connection error. Check the Internet connection. .

  I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.

  I changed to DHCP as it does not work.

  I have a ZTE home modem router connected to the printer.

  The link below should help you.

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

  Kind regards

  Oliver

• m251n impossible to activate the services web hp

  I just got a M251n printer and I tried to set up the wireless for hours through suggestions of support and none have worked.  Trying to activate the configuration of Web Services I receive a message "connection error. Check the internet connection. "The connection is fine and working and the printer is connected via ethernet, and my computer is connected to the printer by USB.

  I use a Mac and you have downloaded the latest driver for the printer.  A suggestion of support said I could have exceeded firmware but I can't find the updates of the firmware for this printer.

  I don't know what the problem is.  It is not straightforward and without the work of wireless, I'll have to return to this printer and buy another brand.

  Any suggestions are welcome.

  Hello neilthedirector,

  Welcome to the Forums of HP Support!

  I see that the color HP LaserJet Pro 200 M251n printer that you cannot activate Web Services. I was able to locate a utility to update the firmware that you can check the printer with, if you are using Mac OS X 10.5 - 10.8.

  HP LaserJet Pro Series Firmware Update Utility<>

  If the update is not present or is unable to solve the problem, try applying a manual IP and DNS address. For that;

  • Enter the IP Address of the printer in the address bar of Safari.
  • Click network, and then Configuration IPv4.
  • Define the INVESTIGATION period preferred to deal with the manual method.
  • Increase the last set of numbers from 50.
  • Subnet mask should be 255.255.255.0.
  • Default gateway is the IP address of your router.
  • Click Network on the left Identification.
  • Under primary DNS (IPv4), enter 209.244.0.3, and secondary (IPv4), enter 209.244.0.4.
  • Click on apply and then turn the printer off, then on.

  Now try to activate Web Services.

• Cannot print a Web Services fact sheet to get a claim Code

  I am trying to add a m276nw of MFP HP LaserJet Pro 200 colour as device ePrint.  I have updated the firmware of the printer.  When I activate the web services button print fact sheet appears, but nothing prints when I click on it and I can't get a claim code.

  I'm stuck.  I don't know where to go from here...

  If you correctly enable web services, you have two options:

  1. use your IP address, he enter in your web browser and go to the integrated web page. Go to the web services tab and find the address of e-mail assigned to your printer. It should be something like [email protected]. The code of the printer will be foregoing the sign @.

  2. go into your control panel. Click the web services (icon on the far left). Click the e-mail display address. Printer code will be foregoing the sign @.

  3. print a configuration page. Tools icon - reports - config page. In the right column, look for the Service Web of HP (lower-right) - the printer email address - printer code will be foregoing the sign @.

  Use the xxxxxx before the sign for the printer code save the connected HP printer @.

• Photosmart 7525: Impossible to activate the web services

  I have a HP Photosmart 7525 and I was once able to scan to e-mail. Now it always tells me that it cannot connect to web services. I tried to troubleshoot including disabling web services and now I can not re - enable web services. Help, please!

  Hello

  Download and install the latest firmware for your printer, it is essential to maintain a Web Services connection:

  It can be installed from any Windows on the following link:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/swItemId/OJ-113641-5

  Kind regards

  Shlomi

• OfficeJet 6500 a Plus: impossible to activate the Web services; roadblocks at all stages

  This printer is connected to my network by Ethernet. I want to activate Web services, so I can use ePrint.

  When I try to enable Web services from the printer control panel, I said that I might need to enter a proxy address. I'm not running a proxy server, but it is not possible around this prompt.

  There are posts on this Board indicating that Web services can be activated with a Wi - Fi connection. I unplugged the Ethernet cable and wireless enabled, but I was always invited address proxy information when I tried to activate the Web services. I disabled wireless and returned to Ethernet.

  A response to another post suggested updating the firmware to bypass the proxy server error. HP recommendation is to do it from the control panel of the printer. In the Panel menu control, firmware upgrade is the title of the Web services, which I can't because of the mistake of the proxy. So I downloaded the firmware and tried to install the update from my computer. The update found my printer on the network, but it is gray, saying 'Not applicable', under the State. I couldn't select it.

  In another post, someone suggested THAT DNS has been configured. I saw, through Server Web shipped by the printer, there is no configured DNS server (the printer is configured for manual IPv4). So via the integrated Web server, I tried to enter addresses (my domain controller, OpenDNS, Google) DNS server. With each of them, the SAP replied: "an error has occurred. (ipv4Page-400). Click 'OK' to go back. "There is no place to enter the DNS settings on the printer control panel.

  Web services require a Wi - Fi connection?

  Why the printer think there need a proxy address?

  The firmware update will solve the proxy error?

  I have to update the firmware, if the update statement indicates does not apply?

  What is another method for updating the firmware out of the control panel or from my computer?

  How to enter the DNS of the EWS information without getting an error?

  Jeffrey Pike

  Groton public library

  Charles:

  Thank you for taking the time to provide a complete response to my questions.

  I finally got the Web services enabled on the printer. What I had to do was enter the DNS settings in SAP to bypass the prompt for proxy information. Step I missed yesterday, when I got page not found error in the SAP, was that I had to do the secure version of the SAP ("https", not "http"), and then the EWS would accept my DNS entries. Once this is done, I went to the printer and could enable Web services without having to provide proxy information.

  The printer is now registered to hpconnect.com, and I can start letting my library to print patterns on my wireless network, that was my goal all along.

  Thanks again for your help.

  Jeffrey Pike

  Groton public library

• How can I activate the web service on 8600

  How can I activate the web service on 8600

  How can I activate the web service on hp 8600

• HP LaserJet P1102w: Cannot install the driver or the printer

  I had this problem on my old PC as well.

  I plugged my printer via the USB port (a port I don't know for sure works) and nothing pops up to auto install or whatever it is. I thoguth that was weird, but I also thought that the pilot would be on the printer, so let's just go to the section of the Control Panel printer. I did it, and the printer is there, but he says that he has no driver. I tried the option to find driver, but that did not work.

  I thought maybe I just need to download it then. Came on the HP site, downloaded the installer for my printer and started running it. He gets to the part where I need my printer and plug it into the USB port. I did, but it will not register in the installation software I did. The USB port works, as I have the ability to eject the printer in the taskbar, but I can not install anything.

  Hello @Kitanya,

  Welcome to the Forums of HP Support!
  
  I understand that you encounter USB connectivity problems during the installation of your HP LaserJet Pro P1102w printer on your computer Windows 8.1. I would like to help you to solve this problem today. Now I see you tried first to install your HP Laserjet Printer simply by plugging the USB cable in order to run the HP Smart Install process. HP Smart Install is the installation program built into your printers of programming. By plugging the USB cable, if own you a CD player on your computer, the printer is supposed to be recognized as a software CD and an installation must be started. However, is there is no problem with the CD drive on the computer or the printer is blocked to be recognized correctly it can cause the HP Smart Install feature does not work correctly. That being said, when you tried to run the installation with the downloaded driver package and were prompted to plug in the USB cable, then because the printer has already been connected "prematurely" with the USB cable already recognized computer connection. Therefore, the computer won't recognize the P1102w related 'recently' if he thinks already that is.

  With that all being said, I will guide you in the faster and easier way to solve this problem. Please follow the steps below.

  Step 1: Uninstall the drivers:

  Even if the installation has not completed successfully a part of the software and drivers can have made their way onto your computer. It is important that we have a nice clean slate to work with, so please follow the steps to remove all traces of your computer printer.

  1. Unplug your USB cable from your printer HP Laserjet, as well as your computer
  2. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  3. In the start screen, type programs and features. Click on programs and features to run
  4. Scroll through the list of population programmes and to locate the HP Laserjet.
  5. Click the HP Laserjet Printer and select uninstall
  6. Follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder, once it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Allow the download to run
  4. Follow the steps on the screen to reinstall your printer
  5. Do not plug in your USB cable until the installation screen invites you to.

  Once the installation is complete, please test printing.

  Please reply to this message with the result of your troubleshooting. Good luck!

• New HP LaserJet Professional M1212nf MFP is does not print on network

  We have a new HP LaserJet Professional M1212nf MFP. I attributed to a static IP address, and he pulls up on its web interface. I loaded the printer for network printing on our Small Business Server 2003 and installed on several PC. No matter what we do, it will not accept a print job, even the test page. Nothing that he prints. I checked spools of printing, drivers, etc. Nothing seems out of place. Any suggestions?

  I could never operate via the server print but is gone to every computer with the CD and installed via IP right and works fine now.

• Cannot start (Service event log)

  While planning to try a task sheduler task, I have been informed a necessary service work not (event log). On trying to start the necessary service (event log), I received the following error message. {Cannot start service on Local, specific error 126 computer event log module cannot be found.} I was online looking for a solution without success, would appreciate any assistance to resolve this problem.

  It's me, George. I solved my problem with a little help from Microsoft.  The solution is simple for those of you with the same problem.  Rather than search the web and the Microsoft Web site, I simply clicked on my "Help and Support" icon on my desktop and entered in the same query.  This time, I got a response that actually question my problem even though she warned that she could apply to XP.  It was for Windows 2000, but I tried anyway and it worked.  The cause of the problem is a DLL missing from the Windows\system32 directory, a file named "eventlog.dll.  It is still on your computer in a different directory, so all you have to do is a search under the road you have installed Windows on this file and copy it to the Windows\system32 directory and everything should be fine.  It's as simple as that.

  I hope this helps all who can be soon _ trying to correct what I tried to correct for the past three days.  Good luck and may the force be with you.

• cannot activate the automatic updates on my laptop.

  original title: cannot activate the automatic updates on my laptop.  Were follwoed instructions Update window without success.  Help!

  Automatic message updates consistent warning box are not on.  Tried several times to move away, but still says that the site has encountered a problem.  Now completely blocked

  Hello

  -Did you change on your computer before the show?
  -Did you have performed the steps described in this article?
  -What Service Pack is installed on your Windows XP computer?
  -Have you tried "fix it" of this article?

  I suggest you to test the issue in a new user account.

• HP LaserJet Professional: How to install this printer on another computer...

  Printer HP LaserJet Professional

  Model: P1102W

  SN: (deleted content)

  Product # CE657A

  In any case to get a manual (.pdf Formate - preference)?  I have two desktop already share this printer, but whenever I have add a printer, I have to call and pay for technical support to do instlled.  I would like to be able to do myself, shouldn't be that hard with a little help.  I would like to install it also this 3rd computer wireless as the other 2 are currently.

  Thank you

  Hello

  Please use same steps as the second computer or any computer after that.

  Kind regards.