HP management suite

Similar Questions

• Extension of Cisco TelePresence Management Suite Analytics

  Hello - I have a few queries on Cisco TelePresence Management Suite Analytics Extension and wanted to get help on the same.

  A. Cisco active development on this product and/or have predefined routes for this platform? We have not quite

  hear updates during the liberation of UC SEVT 10.0 for this platform?

  B. what kind of support is available for this platform in a perspective of customization of the report?

  C. are there examples of SQL scripts that could be re-used to produce reports of the below type:

  • Video endpoint / use of rooms
  • Number of subscriptions too video session
  • Capacity Trending & forecasting for the use of a Port of MCU and increases endpoint.

  D. What are the technical limitations known from the point of view analytics platform? In other words, it does not imply that

  the analytical potential lies in the hands of developer and NOT the platform, taking into account its APIs?

  Thank you

  SG

  See this thread, message of Kjetil Rees (marked as a correct answer) in particular:

  https://supportforums.Cisco.com/message/3449977

  You aren't going to get an answer about the development plans and roadmaps here in a public forum, you will need to contact your Cisco representative for this kind of information.

  If you want something where all the work has been done for you, and that is customized to your specific needs, then you might want to consider looking at vAnalytics, http://vyopta.com/products/vanalytics of Vyopta, http://vyopta.com/

  No, I am not associated with Vyopta, however, we use one of their products.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• URL to download Oracle Identity and Access Management Suite 11 g R2 PS2

  
  Try to download Oracle Identity and Access Management suite over 11gR2PS2 (11.1.2.2.0). While attending throguh Oracle download link,

  • Identity Management 11gR2PS3 (11.1.2.3.0) can be downloaded from the link below.
    • Identity & Access Management 11 GR 2 downloads
  • Same link shows to download Identity Management 11g(11.1.2.2.0) R2PS2 at the bottom of the location
    • https://eDelivery.Oracle.com/
    • While going through the link above and search for identity and access management suit more, it allows to download Identity Management 11g(11.1.2.1.0) R2PS1 and Identity Management 11gR1 (11.1.1.1.0) but no identity and Access Management Suite over 11gR2PS2 (11.1.2.2.0).

  If someone can provide a direct link to download identity and Access Management Suite over 11gR2PS2 (11.1.2.2.0).

  Thanks in advance.

  11.8 GB contains DB, UCR, Weblogic, SOA, patches required for SOA (!) and IAM. Everything you need in one place.

  3.3 GB contains just IAM.

• Architecture with two versions of vCOPs management Suite

  Hello

  I appreciate any help on this issue. I have a client who wants vSphere Enterprise to Enterprise vSOM (with vCenter Operations Manager Standard... by default).  This customer has some virtual machines that need monitoring of application., and as you know, it's possible witht vFabric Hyperic available later in the Operations Manager vCenter Enterprise. If the customer is going to buy this two products:

  -vSOM Enterprise: vSphere Enterprise + vCenter Standard Operations Management Suite (licensed per processor)... for the upgrade.   And

  -Operations Management Suite Enterprise (package of 25 OS Instance) vCenter... for VMS that need monitoring.

  In architecture, the question is whether they can 'mix' present two types of license in the same hosts, or if they put those VMs who need follow-up to separate host applications?

  Thanks for your help!

  It is possible to have two different instances of vC registered to a unique vCenter Ops.  My recommendation would be to manage these two versions at the cluster level (Group A would vSOM, Cluster B would be vC OPS, for example).

• VCenter eval Operations Management Suite License change

  I'm trying the product eval, which is great BTW, but I want to know if it is away from changing the license for the eval for anything other than "the company."  I'm assuming that the eval is the full licensed version, but realistically we will buy something less.  Is there a way to change the eval to reflect the 'Foundation', 'Standard' or 'Advanced '?  I would like to see the product with the limited functionality because it is difficult to determine what are the options in which version.  Thank you.

  Hello dla123,

  Just to make sure we're all on the same page, be aware that product edition names change in version 5.6... When 5.6 released, I'll try and remember to update this message/thread with the mapping between these product editions.

  I write this, because you're talking about the Foundation, which is NOT available for 5.0.  The Foundation provides access to the Victoria Cross analytical performance Ops only, no capacity planning.  As far as I know, no license is required, but you will need to run vSphere 5.1.  Just install the VAPP, register with vCenter and you'll be good to go.

  Standard/advanced/enterprise suites include all the features of the vC to vSphere UI Ops - there is no difference.  The main difference for vC Ops Advanced/Enterprise is that you will have access to the custom user interface that offers the possibility to build dashboards that incorporate third-party adapters as well as some cards of products VMware (like Hyperic and vCD).  Standard does not provide this functionality.

  So, the short answer... to see the differences in the features of the product that you need to wait up to 5.6 is GA so you can watch Foundation (no permit required).  Otherwise, all versions of 5.6 have the same functionality in the user interface of vSphere.

• HP ProtectTools Security Manager Suite

  Hello

  I use this software to log on to windows (W7) with my Elitebook6930p.

  But every time I open firefox a process called strats asghost.exe running and she is my CPU for 30 to 50%.
  Someone at - it solutions, the idea...

  Thanks in advance!

  reinstalled and problem solved.

• Provisioning configuration of extension error telepresence management suite

  Dear Team Support Cisco

  I'm Tung, FROM Sun Media Corp. in Viet Nam

  I am using 6000 BE and install TMSPE on BE6K

  But during the installation, I have problem (attach file)

  "Process must leave before the requested information can be determined.

  I have used TMS 14.4, TMSPE 1.2, Java 8.0 u20, SQL 2008, Windown sever 2008 r2

  Can you help me now?

  Thank you very much

  Java 8 is not supported; You must use the update of Java 7 51 (32-bit or 64-bit).

  See page 11 of the release notes: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tmspe/release_note/Cisco-TMSPE-Release-Notes-1-2.pdf

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Cisco TelePresense Management Suite cannot remove the previous finish

  I use the TMS 14.4.1

  When I remove prerequisites finished, I get a warning:

  

  Are there people who know the reason why I can't delete prerequisites finished?

  Thank you and best regards.

  Starting with TMS 14.4 meetings which ended in the past cannot be deleted, it is a new feature to keep the data of the COR.  See bottom of page 2 of the TMS 14.4 release notes, under 'changes to the treatment of current and deleted meetings. "

• ProtectTools Security Manager

  Hello

  I have the following problem with my 6710 b - Windows 7 Ultimate edition:

  I try to install ProtectTools (4.10.10.3), the installation looks ok, but begin it when

  Security Manager, I get the message "chargement cargo security providers, please wait" and nothing else?

  any idea?

  Thank you in advance,

  ELE

  Hello

  Try to install the latest version:

  HP ProtectTools Security Manager Suite (ver. 4.10.17.1) ici

• RE: Oracle Identity Management (11.1.1.6.0)

  Dear all,

  I have a current build using the Identity and Access Management suite on (11.1.1.5.0) and my question is that I now want to integrate this with the identity management to give me the OID. What I want to know is that I can just after the creation of the schema using the RCU ODS and installation dentity Management (11.1.1.6.0) or I have to go with dentity Management (11.1.1.5.0)?

  Kind regards

  Kessler

  You want to create a new home for your installation of OID middlware if she is at version 11.1.1.6.  Then you should be able to use the remote control for 11.1.1.6 against the same PB if you want to create the schema for OIDS.

  -Kevin

• WebCenter Universal Content Management vs. content WebCenter

  OK, so I'm really confused... I know that this question is asked a lot, but the responses I see don't make sense. In this Oracle document lists the UCM and WebCenter content as two different applications with different characteristics (although if you look closely, you will notice that they are all the same features, just worded differently). But in this article, she states that WebCenter content was previously Manager of content business, and in this one, he says that WebCenter content used to be named Complutense University of MADRID.

  How does have any meaning?

  In fact, it is not quite correct.

  First, we must distinguish between product and SKU.

  Universal Content Management, University Complutense of MADRID, was a SKU that existed also in 11g (and has been restored as a content WebCenter: Universal Content Management). It contains the central module (called at the time of the Stellent content server), as well as the majority of the optional modules (documents, management of the WebContent AKA Site Studio, Digital Asset Management, just to name a few). But license contained UCM also restricted licenses to other products such as Secure Enterprise Search, BPEL Process Manager and Weblogic Server (not required in 10 g).

  In addition, rates until December 2011 contained two another 'product' SKU, namely Universal Records Management, URM, imaging and process management, I / PM (now called WebCenter Imaging) and a "suite" product, Enterprise Content Management Suite, which contained all of the UCM, URM, I / PM and now no longer existing IRM (Information Rights Management to secure workstations documents at the level of the customer).

  Originally, WebCenter content was nothing other than the rest of the ECM. Later, we MRI has been deleted, and even later, we the WebCenter content added restricted permit unified BPM Suite rather than simply BPEL PM. At the end of 2012 AAU SKU has been reinstated as already mentioned.

  In this perspective: the main difference between the AAU and WebCenter content is:

  -Happy contains also imaging and Record Management (RM is currently only available in this Reference)

  -Happy contains human BPM Suite rather that BPEL PM - BPM Suite is more suited to the workflow

• Agent and Manager of JVMD

  I read the Setup Guide Basic OEM Cloud Control on JVMD Manager and Agent. I'm looking to see if I need to put in place or not. Also, I understand the basics.
  
  We have an Application of Siebel CRM using Oracle BI statement. According to our administrator Siebel, cause install JDK installation. It said that Siebel uses Java to make calls to Oracle BI. The JVM Diagnostics would capture these calls and determine when you have latency or is he there is a problem in calls and where the problem may be. Is this correct?
  
  (There are two) 1 JVMD Manager and Agent JVMD 2 pieces).
  
  JVMD Manager
  JVMD Manager is deployed on Weblogic Server that is part of the OEM Cloud Control field. Oracle recommends that you do not deploy other applications on the managed server on which Manager JVMD is deployed. Does this mean that its ok to deploy JVMD Manager on the same host as the WHO as long as we do not host another application? I think it's against the 12 c oem licenses, unless you pay for the Weblogic Server licenses separately.
  
  Agent JVMD
  Agent can only be deployed with the managed server. Is this average target managed? It includes 12 c Clould Contol system OEM. How can I configure to control the system where Siebel/Oracle BI/JDK is installed?
  
  Thank you.

  No, we need a management suite/pack which includes the JVM Diagnostics to take advantage of the feature against your license targets. It is certainly a key element, especially for use against the containers that you mentioned. Analysis of visibility and lots of deep thread can easily identify issues that would otherwise be very difficult to detect and diagnose in a production environment. Basically, this will be useful for any application that runs in a Java (or even a standalone JVM) container with regard to production-level diagnostics.

  For OBIEE, I highly recommend using the first OBIEE management functionality as it was designed specifically to monitor and manage OBIEE who needs specific surveillance platform even context. However, this does not however mean that other packs such as WLS Management Pack EA will perhaps not as provide extra visibility on the environment.

• Installation guide for BPM SOA Suite and Oracle 11g

  Does anyone know of a good installation guide for a new installation of the following SOA and BPM of Oracle 11 g (Windows 64 bit)?
  
  I'm looking to the 'Setup Guide quick for Oracle SOA Suite and Oracle Business Process Management Suite 11 g Release 1"(http://download.oracle.com/docs/cd/E14571_01/install.1111/e14318.pdf), but it is a bit dated (April 2010) and I see that is missing a few steps.
  
  Thank you

  Take a look at the for Oracle SOA Suite 11 g 1 material (http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf) Quick Start Guide.

  The steps that do not appear in the document you mentioned are included in this document. It takes you through the necessary extra step for the installation of Oracle BPM. Although for 11.1.1.4, it works very well for implementing 11.1.15 in a DEV environment.

  Dan

• Presentation of BPM Suite Overview Oracle OpenWorld 2008

  Hi all
  
  I don't have a chance to join Oracle OpenWorld 2008. I heard that there is a presentation of "Oracle Business Process Management Suite Overview," which is very good to know. Can someone tell me where I can download?
  (I tried to download from 'http://www28.cplan.com/'. But he gave me the blank presentation)
  
  Thank you much in advance.
  
  Best regards
  Pearapon S.

  He will be transferred to the cb site soon. In the meantime, send me an email at [email protected] and I will send it to you.

• HP EliteBook - 2730p: lack of drivers Windows HP - 2730 10 p

  After my update Win 7 to 10, I'm missing some drivers.

  In Device Manager, they are grouped as follows:

  -Other devices

  -System base unit

  -Fingerprint sensor

  -Serial Port PCI

  -PCI Simple Communications Controller

  -Unknown device

  Please advice how to solve this problem.

  Hello:

  Use the drivers for W7...

  Base system device:

  This package contains the Ricoh Media Card Reader Driver for laptop models supported and operating systems. The Ricoh Media Card Reader driver supports the following media: Memory Stick, xD-Picture Card, MMC, SD and smart card.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45112.exe

  Fingerprint sensor:

  This package contains the driver for the AuthenTec fingerprint sensor in the notebook models and operating systems. NOTE: To use a fingerprint to connect to a Microsoft Windows, Microsoft Windows Vista or Microsoft Windows 7 laptop, the HP ProtectTools Security Manager Suite version 4.00 is necessary.

  FTP://ftp.HP.com/pub/SoftPaq/sp47501-48000/sp47729.exe

  Serial port PCI and PCI Simple Communications Controller:

  This package provides the driver Intel Active Management Technology (AMT) for portable models supported and operating systems.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45131.exe

  Unknown device:

  This package provides the HP 3D DriveGuard to portable software supported that are running a supported operating system. HP 3D DriveGuard protects the hard drive of "parking the heads ' if the cell phone is accidentally deleted or is suddenly hit by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe