HP Media Center PC unable to acess wifi networks

Similar Questions

• Win7 x 64 Media Center is unable to play Netflix instant movies

  I have no problem, watch instant movies from netflix on the netflix Web site. However, when I try to use media center to watch a movie, I get a message that it was a problem of internet connection. I can watch the movie planned but not the film itself. I called netflix and I was told that they do not support Media Center. It seems that this is the problem with DRM differences between silverlight on the site Web of Netflix and Media Center.  Any suggestions? Media Centre would be my preferred method for watching these types of films

  I have no problem, watch instant movies from netflix on the netflix Web site. However, when I try to use media center to watch a movie, I get a message that it was a problem of internet connection. I can watch the movie planned but not the film itself. I called netflix and I was told that they do not support Media Center. It seems that this is the problem with DRM differences between silverlight on the site Web of Netflix and Media Center.  Any suggestions? Media Centre would be my preferred method for watching these types of films

  Hello

  Please visit the following Web site for the solution. You will need to download and install a special file.

  Note the tabs at the top of the page for more information. When you are ready, click the button now try Netflix in Windows Media Center .

  Microsoft Windows: Netflix in Windows Media Center

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Windows Media Center is unable to use my dvd recorder

  Windows xp SP3

  Deliver you with Windows media Center

  'Create disc' (in the photos) it is endlessly with cd/DVD required please try again.

  I checked the DVD recorder can burn using isoburn, it does.

  I can also burn music using Windows media player. So the DVD recorder works defiantly.

  I've updated all the drivers and software and I'm stuck. Any advice would be helpful.

  
  

  Thanks for the replies. I decided to restore the original configuration, it authorized the error. At soon K

• Windows Media Center is unable to output Dolby Digital/DTS via SPDIF... only stereo PCM is sent

  Hello

  I recently bought a desktop computer HP Pavilion with Vista Home Premium (64 bit) 5150t.  The PC comes with a TV tuner and it works well with Media Center except that it cannot output Dolby Digital (or the other program on the air with JJ or DVDs of films that have a DD) outside of my A / V receiver.

  My Board has Realtek HD Audio and I activated the digital (SPDIF) output in its program.  I put the "Properties" of the digital output in support of * TWO * DTS and Dolby Digital encoding.  When I press the 'Test' button for either format, outside A / V receiver correctly recognizes the format, so the problem is not with my receiver.

  Read forums and online help notes, I strongly suspect that the codec MPEG-2 by default for Windows Media Center is not configured correctly for cross DD or DTS - it somehow always stereo down-Mix before sending to SPDIF.  Could you tell me how to check and change codec setting?  Thank you!

  -Colin

  Hi Chow Ho.
   
  This problem occurs because the DirectShow component and audio decoder MPEG2 in Windows Vista does not correctly support DTS pass through S/PDIF or HDMI.
   
  To work around this problem, click to select the box Audio DTS and Dolby Digital check box in the SPDIF Out properties dialog box or the dialog box Properties of HDMI Out .
   
  You can also check out the link below for more information:
   
  http://support.Microsoft.com/kb/940685
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Want to configure Media Center to record TV on a network media player

  I installed an Iomega Home Media Drive and expected that I was able to conifgure WCE to use.   Player netwroked folder was located in T: but I can't change the storage location of MCE TV Recorder of C:
  I can not also any network location drive select as spies files in Media Center
  While I can map and access folders on the Iomega hard drive, it does not actually appears separately in the list of positions in network.
  Any help is appreciated.

  Hi Anthony,.

  Welcome to the Microsoft Answers site!

  You can follow these steps to configure the player to record all programs.

  1. On the Start screen, navigate to tasks, click settings, click TV, click recorderand then click recorder storage.
  2. Under record on drive, click on the - or + to select the drive on which you want to save.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

  To add a folder to watch

  1. On the Start screen, navigate to tasks, and then click settings.
  2. Click library settings.
  3. Click Add folder to watch, and then click Next.
  4. Depending on where your digital media files are stored, click one of the options under which folders you want to add?, and then click Next.
  5. Navigate to the files that you want to add by clicking on the - and + buttons and then select the check box next to each folder. (Files in subfolders will be included with your selection).
  6. When you have selected all the folders that you want Windows Media Center to watch, click Nextand then click Finish.

  After you have finished adding files, it may take several minutes for the files in the libraries.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-digital-media-files-to-Windows-Media-Center

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• ATV4 is unable to see WiFi networks

  Each time my new ATV4 (TvOS 9.2.1) will lose the WiFi connection. When I try to reconnect it "sees" no WiFi network at all. My other devices (MacMini and several iPhones and iPads, smart TV, etc.) have no trouble finding my WiFi network or those of my neighbours. The ATV4 is almost line-of-sight with and about 3 meters (10 feet) from my router. My other ATV4, which was originally two concrete walls, never loses the WiFi connection.

  The new ATV4 always restarting fixes the problem, but it seems that I wouldn't restart the ATV so that he can see the available WiFi networks.

  I'd be inclined to try somewhere else to try to determine if the problem is inherent or due to your environment.

• Windows Media Center is unable to start with RF remote control

  WMC to: 6.0.6002.18242 (Vista SP2 - gdr.100414 - 0533)

  Remote control: Medion OR28v Vista remote control made by x 10 RF

  1. a couple of days, I tried to start WMC with my remote in the normal way, but nothing happened at all. Normal start was always activate WMC remote once the model has been started.

  2. Subsequently, I reinstalled the original drivers of my back on my hard drive. I then did a Windows Update and 2 X10folders have emerged, (X10HID and X 10 Transreciever(ACPI Complient) Wireless USB device)

  3. now, the remote has yet acivate WMC, after a start UNLESS I go into the PANEL... click on WIRELESS REMOTE SETTINGS... on which WMC activated instantly! (the channel also change Panel that appears, and then had to be cancelled)

  4. I can also activate WMC in the mouse in all THE PROGRAMS by clicking on the folder WMC

  5. I can now use all the functions in the usual way on the remote control. Also can I resart WMC at any time with the remote until I reboot/start.

  6. to reinstall the original drivers, para 2 refers, no functions of the remote control could be used even when starting the mouse during activation of WMC in the folder all THE PROGS of WMC

  .

  Thus, PES Advisor How do I get my remote to turn on the WMC after start/restart, notes: the remote control to activate all the functions but only when the WMC is active in the alternative path as described above (paras. 3 and 4)?

  It seems that nobody here knows answer (including me). I suggest that repost you this on The Green Button forums, there are some experts WMC.

• Windows 7 Media Center is unable to save

  I'll put up a HTPC.  I use a cable card and have 3 tuners. The guide and channels have loaded correctly and I am able to watch television.  When I try to record a TV program either in real time or on demand, I receive an error message that the program could not register and get the error code - 2147024891

  Any ideas?
  Thank you.

  OK, I solved this problem by restarting the computer.

• KWorld 399U tuner TV USB "unable to determine the configuration of the TV signal" Windows 7 Media Center (64-bit)

  I just upgraded my computer to Vista 64-bit for Windows 7 and am more able to use my USB from KWorld 399U tv tuner in Media Center.

  It worked fine on Vista, but after the upgrade, it asked me to set up my tv again signals. After that Media Center works "review of TV signals" for several minutes, it displays the message "Windows Media Center is unable to determine your TV signal configuration.

  I tried to download and install the latest drivers for Windows 7 http://uk.kworld-global.com/main/support_down.aspx?mnuid=1338&modid=22, but this does not make a difference.

  I drove my machine back to Windows Vista and the tuner works perfectly again, even after installing the latest drivers.

  Can anyone help?

  Thank you very much for your time.

  I had exactly this problem. My Setup has worked for weeks, then afer a RAM upgrade MC could get is more a signal of the usb U399. After a lot of noise, I uninstalled the driver from Device Manager, rebooted and windows prompted me to install a driver MSI... I tried this and it worked only!

  The KWorld Installer seems to be wrong.

  The location Windows driver is http://download1.msi.com/files/downloads/nb_drivers/tv/tv_mc810_9.603.1.0630_w700.zip

  Good luck.

• Can share files with the XBox 360 to Windows 7, but unable to connect to Windows Media Center

  I reinstalled my system of exploitation of 64-bit Windows 7 to Windows 7 32 bit and reinstalled the documents to the user and the location of the program on a separate hard drive data. I was able to add both my XBox 360 on Windows Media Center Extender at least 15 times before that, but it's the only time wherever I reinstalled with 32-bit and moving the location of the documents to another drive (even if I still have them settle there but just by changing the location under properties after the operating system is installed).

  When I try to add the Xbox 360 as an Extender, it goes up to like making up the 'contact' on the Xbox loading screen, but then the Media Center on the PC says something in the sense of "Windows Media Center has encountered an error... »

  Anyone can shed some light on this situation?

  Hello
   
  You can try to reset Windows Media Center, see these steps.
   
  (a) click Start
  (b) open the Control Panel, then programs and features.
  (c) click on "Tor disable features of Windows of the URN"in the left pane.
  (d) develop "multimedia functions", uncheck "Windows Media Center". Click 'Yes' to continue and click OK to exit.
  (e) and then restart the computer.
   
  Once the computer is restarted, perform the following steps.
   
  (a) reopen 'or turn off Windows features turn on'. Enable features. "Windows Media Center". Restart the computer.
  (b) launch Windows Media Center, initialize program.
   
  Check if the problem persists.
   
  See also:

  Windows Media Center Extender: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Use a Windows Media Center Extender

  http://Windows.Microsoft.com/en-us/Windows7/use-a-Windows-Media-Center-Extender

  Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Optimize your home network for Windows Media Center Extenders

  http://Windows.Microsoft.com/en-us/Windows7/optimize-your-home-network-for-Windows-Media-Center-Extenders
   
  Check if it helps.

• Media Center Guide 'no data available '.

  I noticed that every now and then I see "No Data available" for some channels in the guide. Its random when it happens and what channels show it. The only way that I can't bring back data is to go in the guide editor and make a small change and keep the guide. After recording, the guide is complete again. After a week or two, the same problem is back. Could be timed with the release of the automatic guide.

  The channales than what is happening on are on my list dishnetwork.

  Thoughts?

  Hello NerdBrick,

  Thank you for using Microsoft Vista answers Forum!

  Here are a few possible reasons why you may have this problem with Windows Media Center

  ·         Media Center was unable to download the new registrations.

  ·         Data are not available for your Microsoft TV Listings service provider location.

  ·         Media Center has identified existing data on your computer to be outdated or damaged.

  For more information and how to resolve this problem, follow the guide step by step in the link below

  There is no data available in the Guide

  If please reply and let us know if your problem is resolved or if you need more help.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Windows Media Center learned remote control cable, cannot recognize the Windows Media Center remote control

  Running Vista Home Premium 64-bit.  I rent a cable box so I can get some programs at the 3-digit level.  When I've set up my Windows Media Center (WMC), WMC learn successfully the cable box remote 1 - channel upward.  My problem is the next step and change the channel using the Windows Media Center remote control or keyboard.  My keyboard or the WMC remote will change the channel.

  I got Windows Media Center to re - learn the cable box remote control twice, which is always successful, but again once, when the time comes to use the Windows Media Center remote control or my keyboard to change the channel, the channel does not change.

  Could someone please help me with this?  Thank you in advance.

  Hey kansascitykid,

  If you receive your TV signal through a set-top box and Media Center is unable to change the channel, or it changes channels incorrectly, check the following:

  ·        The infrared diffuser is connected to your remote control receiver. If the infrared diffuser is not connected, Media Center cannot send a signal to the set-top box to change a channel.

  ·        The infrared diffuser is well positioned at the front of the set - top box. If you are having trouble placing the IR blaster on the set - top box correctly, try to use a flashlight to locate the signal on the set - top box receiver.

  ·        IR control codes are configured correctly. If constantly changing channels, control IR codes may not have been configured correctly during the installation of TV signal. To reconfigure your TV signal, on the Windows Media Center start screen, highlight toTasks, clickSettings, click on TV, then clickSet up the TV Signal.

  • Center cannot send a signal to the set-top box to change a channel.

  More information here: problems with watching TV on your computer

   

  Also have a look if you find useful suggestions in this thread.

   

  Microsoft Media Center remote with pace DC50X 1039, Setup box cannot change channel

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot play online games and Media Center will not work.

  Original title: can't play games online

  I have internet explorer 9 and adobe flashplayer 11 but used to my computer let me play games on the internet, my I player and other television channels, even my media Center do not work. They keep stopping and starting or won't work.  What is java? and should I install on my computer. Any help would be greatly appreciated.

  Hello

  1. is the specific question of part or all of the games on the internet?

  2. what happens when you play videos on Windows Media Center? You get the error message? If so, what is the full message?

  3. have you done any software or hardware changes on your computer before this problem?

  Method 1:

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  For more information on Java, see the above link.

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/why-Don

  Warning to reset Internet Explorer:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 2:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833

  Method 3:

  Problem with Windows Media Center, refer to this method.

  You can try to reset Windows Media Center, see these steps.

  (a) click Start

  (b) open the Control Panel, then programs and features.

  (c) click on ""turn Windows features on or off ' in the left pane. "

  (d) develop "multimedia functions", uncheck "Windows Media Center". Click 'Yes' to continue and click OK to exit.

  (e) and then restart the computer.

  Once the computer is restarted, perform the following steps.

  (f) open 'Windows turn features on or off' again. Enable features. "Windows Media Center". Restart the computer.

  (g) launch Windows Media Center, initialize the program.

  Check if the problem persists.

  Further, I suggest that you open the display of the event logs and are looking for complete errors when Windows Media Center is unable to start.

  Reference: Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also: What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-event-viewer

  Hope the information is useful.

• HD channel added to the existing range of Windows Media Center

  I use a Ceton Infinitv card in Windows Media Center Win7 HomePremium.  The NFL Network was added to my cable (!) yesterday Time Warner range.  Is it possible to add this to my line-up without rerunning Setup tv signal?  It is not a clear qam channel so I don't think that I am able to use the "Add a missing channel" option in the menu tasks.  I'm on the cable box in another room, so I know its not already.  Any help would be appreciated.  I don't know on the point to have a lot of people with the same question.

  the Ceton diagnostic tool see these channels?
   
  in any case, http://1geek1tool.com/guidetool might be of interest to you.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can canone help?

  I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can anyone help?

  Thank you
  Joseph

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com