ATV4 is unable to see WiFi networks

Similar Questions

• Unable to see wireless networks

  I had a Wireless Linksys 802.11 G (WRT54G) and card adapter 802.11 N (WMP600N) for several years. I'm running on XP Pro 2002 SP3 on a desktop with an elite E7200 MB and Core 2 Duo processor. This morning I was unable to connect to the wifi while I had no problem before. I also noticed that I have no visibility for networks wireless in the region, there are usually several. Here's what I did to try to resolve the problem:

  (1) I opened the window to the systray MS wireless network connection, and he says "no wireless networks were found in range." I chose the network list refresh, but no diff.
  (2) I checked my smartphone, and it is connected to my wifi, so the modem and/or router is not the problem.
  (3) I rebooted my modem and router with my PC anyway, just to be sure. Still no diff.
  (4) I opened a Cmd window and sent a ping 192.168.1.1 (router), and it has expired.
  (5) from the Cmd window, I ran the following commands:
  (a) ipconfig/release
  (b) ipconfig / renew
  (c) ipconfig/flushdns
  (d) ipconfig/registerdns
  Still no diff.
  (6) I opened Services.msc and checked my Wireless Auto Configuration service, and it is set to automatic and is started.
  (7) I opened the network connection and a right on wireless network connection and selected click Deactivate and then reactivate. No diff.
  (8) I opened the network connection and click with the right button on wireless network connection and select Repair. No Diff
  (9) I reinstalled my modem and router, next to my computer and logged a rigid cable from the router to the PC (not a proper fix). I was able to connect to the network and to the internet by cable, but not yet by the wireless.
  (10) I went to the site Linksys and downloaded an update of the driver for the network card and installed. Still no diff.
  (11) my system is dual boot with Ubuntu Linux, so I rebooted into Ubuntu. Ubuntu has shown that both my Wi - Fi network connections and worked. I disconnected the wired and wireless was still working. I was able to access the internet via WiFi on Ubuntu! This means that the problem is not with my hardware or BIOS!.
  (12) I rebooted into XP. The wireless connection still does not work and is still not able to see the networks without wire in the region.
  I am unable to get my wireless network connection is working under XP. Is there something that only I was missing to get this working again?

  Hello

  Your wireless adapter should show 3 tabs, general/Wireless Networks / advanced. It is not in my experience of this tab to miss when a wireless adapter is installed.

  Your installation of the driver installs a configuration of the Linksys utility? If so, open it and look for a setting allow Windows to manage the wireless network. Or even try to Setup using this instead of Windows.

  If you uninstall the wireless card in Device Manager...

  • Click Start, click Run, type devmgmt.msc and press enter
  • Enlarge (click on +) section of the network cards
  • Right-click your wireless card and click on uninstall

  .. .and then restart the PC and let the XP to re - install the adapter and its drivers, adapater properties has now three tabs, including wireless networks?

  If your configuration is a single PC and wireless router or multiple PC where all other PCs are OK, I wouldn't bother with the thumb and the wizard disk. Easier to just right click on the network icon at the bottom right of your screen wireless, then click View available wireless networks, click Select your network and click on connect (assuming you can get the tab missing is displayed).

  Tricky

• HP Media Center PC unable to acess wifi networks

  I recently moved and just unpacked my HP Media Center PC desktop computer that is running Windows Vista.

  I have 2 other computers running on my network wifi with no problem, one Mac and a PC. For some reason, it seems that on the HP Media Center PC wireless LAN is not working. He cannot recognize all networks in my building, and I know that there is a lot of range, including the one that set up for the apartment.

  Is it possible to toggle the wifi on the desktop? What can I do to check/fix/activate? I googled had a ton of stuff, none of which seemed to work.

  Thank you!

  Hello mattyg12, as I see it, the wireless card requires and external antena, as mentioned in the book loads.

  I've never seen a without an external antena internal wireless card, but there may be some.

  The built-in wireless adapter may have worked at your other place without external antena, if the computer was close to the wireless router. The wireless signal would be greatly reduced without external antena.

  You can buy these antenas from many sources at a reasonable price if you do not find one that should have been shipped with your system.

  You can also buy a wiresless USB adapter that fits simply into an available USB port. I have used many of them, and they work great.

  I don't think that you will never get the wireless computer to connect to the router or another device like a USB adapter wireless wireless wireless without the antena.

  If you go with the USB adapter, you will need to enter the Device Manager and disable the current wireless (the one without the antena) device so it would not conflict with a USB wireless adapter.

  I hope this helps.

• HP C4780 unable to see WIFI

  I have the printer for a little over a year now and has always worked well.  All of a sudden, it does not connect to the WiFi at home.  Any suggestions?  I ran the test on the touchscreen and he does not see a wifi available.  I have 2 different wifi connections, one is for children and the other is for my pc and games consoles.  Any help would be grateful.

  

  Thank you for your help.  I thought about it.  It was a bad firmware version.  I deleted all the HP services of my laptop, connected to the printer via the USB port and redownloaded the installation.  Works like a charm.

• WiFi networks fall too often

  Hello

  This drop router often 2.4 or 5 GHz WIFI networks.
  When this happens, none of my devices (5 of them, including IOS, Android, Windows and MacOS) can't see WIFI networks.
  the 5 GHz range falls more often than the 2.4 but the 2.4.
  They are never at the same time.
  Finally, it is, randomly or if I reboot the router.

  I also noticed that I always see 2 networks of comments that I put in place. Those who never fail.

  Wired connections also abound.

  When I connect to the router config page (URL or via the application engineering) the router shows no errors. In the router settings section, the two WIFI seems to be shown as being active (there is a button refresh here, but I don't know what he does)

  I already have RMA Router 1 times since last November, but the problem never went away.

  I'm getting really disappointing with this brand now.

  I hope that I'm not the only one in this situation and that Netgear will do something about it.

  In the meantime, my brother wanted to buy a new router and I have already told him to stay away from Netgear.

  Hi al59571,

  Please see this article.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/23655/~/troubleshooting-intermittent-wireless-or-dropp...

  The router has 1 year hardware warranty for replacement from the date of purchase. You can check the support for this team.

• T430 on Windows 7 (64 bit) sees no wifi networks

  My agency just gave me a Lenovo T430, and I'm in charge he get up and running. Requires the company, I work for a new installation of Windows (I installed Windows 7 64-bit), but does not install the drivers for the T430 outside ones included in editions of the retail of Windows. Apart from this question, the T430 seems to work very well.

  I is gone on the side of Lenovo driver download and downloaded all the drivers for Windows 7 64 bit wifi and installed those who install and rebooted. Still not to see wifi networks.

  What should I do to get this T430 to see wifi networks?

  Thank you

  Greg

  From here: http://www.pcidatabase.com/index.php

  DEV_0891 returns as: the controller of Gigabit Ethernet 10/100 / 1000 Mbps, which seems to be the wired Ethernet. Your wired connection works or you use another machine for packs driver D/L? The drivers for this device are here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028930 if you need.

  Given that you have ID'ed visually the wireless network adapter, the driver W7x64 related here:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015011 * should * be what you need, but I am surprised that you are not showing a network controller "yellow!" which itself with the dev ID is appropriate. Can you confirm that you have tried to install this driver pack?

  Finally, I'm fairly certain that the Base system device is the Ricoh card reader. The pilot would be here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028931 if so.

  Kind regards.

• Unable to see a wifi network with Atheros 5005 g wireless network card

  Hi, new to this.

  I tried Hnatyshyn best part of a month for my Equium M50 PSM59E to see a wifi network that broadcasts on 13(unlucky for some) channel.

  I can't screen authetication for network WPA - PSK on the wireless network settings. The wireless network card is the Atheros 5005 G with the latest version of the driver downloaded from Toshiba and KB893357 Knowledge Base.

  The network is visible in this computer with a plug in DLink DWLG650 +, how the Atheros to work?
  Soon Alex

  Hello

  are the two of you using Configfree? And the most interesting thing would be: what system are you using?

  Otherwise I can give you a link to another thread where you can probably find a few info´s on the configuration of wireless network:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26088&MessageID=95706𗗚

  I suggest all of you to google around a bit. Most of the questions are either here in the forum in the section wireless or on some Internet sites that can be found with the help of google.

  Cheeers

• How can I see who is connected to my wifi network?

  How can I see who is connected to my wifi network?

  What is the brand and model of your wireless router that produces your Wi - Fi network?

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• Can't see all networks wifi on initial Setup

  There was a problem with my original Touchpad (it does), so I sent to HP and just received my refurbished model. However, when I start the initial setup and it asks me to connect to a Wifi network, none appear, even if my network and my neighbors are all visible & active.

  My network configuration has not changed since my original Touchpad, which connected very well, so I don't know why this one should give problems. Any thoughts? It is extremely frustrating that I can still use my new Touchpad!

  Following my previous post, I called HP, explained my problem and they sent me a replacement. The new (renovated) came in a few days later and it connected to Wifi without problem. I proceeded to the initial installation and have no problem with this new unit.

  So, for all those who still have a problem with an inability to see any Wifi access during the initial installation points, contact HP and explain your problem. If you are able to upgrade to 3.0.4 use WebOS Doctor, do this and confirm that your Mac address is all zeros. This seemed to be the point of triggering of a replacement for me.

  Good luck to all! I'm going to use CM7 .

• Can't see some WiFi networks, while others may

  This problem only occurs on the floor of a convention center (and it takes place in several events)

  (1) I see some networks, but not the designated convention center WiFi free

  (2) everyone around me (a few feet), automatically detects and connects to the network

  (3) I do my cell phone a hotspot.  I detect cela, but does not connect.

  (4) I go back to my hotel room, easily detect / connect to the wifi at the hotel, as well as easily detect / connect to the hotspot.

  I use Windows 7 Professional

  Compare the networks that you can see with one of your colleagues.  You see them with the same signal strength?  If it is then maybe your ability to receive card WiFi is abnormal and the desired network arrives just in below the level that he can cope.

  If this is the situation then search this forum, the support site for your computer manufacturer & their forums of users for your WiFi card.  See if other people have reported similar problems and how they fixed them.  If there is no guideline anywhere then reinstalling the card driver WiFi might be the first thing to try.

  I made this suggestion because my card WiFi Dell Inspiron 1545 [Broadcom 1397] could never receive the same strength of signal to others could.  Several other users of Broadcom 1397 reported the same problem.  In this case, the solution was to uninstall Dell utility WiFi control then [Device Manager], select the WiFi card, look in its properties, driver tab and back the driver by default that came with Windows 7.  I don't pretend that your solution will be the same and I invite you to search for reports from other users.

• Windows 8 user unable to connect to the public AT & T Wifi networks (McDonald's, Starbucks, FedEx desktop, etc.).

  I searched here and I have not found anyone else with this issue, but I can't be the only one.

  In the event that I am the first, my problem is that I can't connect to the public AT & T WiFi networks; McDonald, being the most common location.  It appears in the list of wireless networks, but it takes forever for the McDonald's to open web page in the box that says something like "Connect to the Internet" or words to that effect.  Finally after clicking this check box, a message appears at the bottom of the page indicating that the webpage is not responding; Click to refresh it.  No matter how many times I try it, nothing happens.

  I have Windows 8 on a Toshiba Satellite.  It's a new laptop comes with Windows 8; No updates to otherwise than to buy this new laptop.

  What is strange, is that I am on a WiFi network at the moment.  "Wandering WiFi" to be precise.  But I tried to get on AT & T at Starbucks earlier this evening and had the same success that I had at McDonald's.

  I'm pretty sure that I don't mess with settings wireless on my pc but I can't say that for sure 100%.

  Sorry to see that you are having problems. Please, try the following.

  Restart the device

  Make sure that all the updates have been applied.

  • Open the network connections Panel
  • Select the network connection corresponding to either right click (mouse) or hold by selecting (finger).
  • A Context Menu will appear. Please Select forgotten network.
  • After the network connection is dropped, please reconnect.

  If that solves the problem then great! If this is not the case, let know us and we will try something else.

• Pavilion G6-2005ax, unable to access the wifi network

  Hello

  I was on WiFi from the laptop. But it does not check the Wifi Hotspots.

  and even if it is true, it is impossible to connect to this Wifi network please help.

  I use Windows 7 Basic.

  Hello rjrocks,

  Have a look here http://goo.gl/jcCqx and see if these troubleshooting steps will help solve your problem.

  There are several steps here http://goo.gl/CKicD if the first document does not work.

  Please let me know if this can help,

• My PXE / ESXi autodeploy is unable to see my cards network Broadcom NetXtreme II 10 Gigabit Ethernet (BCM57810).

  My PXE / ESXi autodeploy is unable to see my cards network Broadcom NetXtreme II 10 Gigabit Ethernet (BCM57810).
  

  
  

  What I'm missing here?

  
  

  # Extract the bundle off the downloaded zip line and place it in C:\AutoDeploy

  Add-EsxSoftwareDepot - DepotUrl C:\AutoDeploy-VIBS\BCM-NetXtremeII-11.0-offline_bundle-1553810.zip - net-bnx2x name | Sort descending creationdate | Select creationdate, Version, StatelessReady, summary

  CreationDate Version StatelessReady summary

  ------------                          -------                                                     -------------- -------

  21/01/2014-07:10:23 1.78.79.v50.2 - true 1OEM.500.0.0.472560 bnx2x: driver for VMware ESX

  08-02-2012 03:00:42 1.61.15.v50.3 - 1vmw.510.0.0.799733 true bnx2x: driver for VMware ESX

  # Add the driver (use force because complains and fails otherwise)

  Add-EsxSoftwarePackage - ImageProfile "Profile001" - SoftwarePackage net-bnx2x-force

  # Check it is there

  Get-EsxImageProfile "Profile001" | Select viblist - ExpandProperty | where {$_.} Name - like "net-bnx2x"} | FT-auto

  Date created Version of the vendor name

  ----      -------                           ------   -------------

  Broadcom 1.78.79.v50.2 - 1OEM.500.0.0.472560 net-bnx2x 21/01/2014 07:10:23

  # Export

  Export-EsxImageProfile - ImageProfile "Profile001" - ExportToBundle - FilePath "C:\Users\Administrator\Desktop\ESX-Software-Depot\Profile001.zip".

  WARNING: The image profile is not validated.  ISO / offline Bundle will always be generated, but may contain errors and may

  functional.  Errors:

  WARNING: Requires the VIB Broadcom_bootbank_net - bnx2x_1.78.79.v50.2 - 1OEM.500.0.0.472560 com.broadcom.cnic_register - 9.2.0.0, but

  be satisfied within the ImageProfile. However, the VIb (s) Broadcom_bootbank_misc-cnic - register_1.78.75.v50.1 - 1OEM.500.

  can meet this requirement.

  > # Confirm ESXi image name

  > Get - EsxImageProfile - name Profile001 | ft - auto

  Vendor name has changed the level of acceptance

  ----       ------ -------------        ----------------

  VMware Profile001 27/02/2014 PartnerSupported 18:44:45

  >

  > # Net-bnx2x Confirm is a software installed

  >  Get-EsxImageProfile "Profile001" | Select viblist - ExpandProperty | where {$_.} Name - like "net-bnx2x"} | FT-auto

  Date created Version of the vendor name

  ----      -------                           ------   -------------

  Broadcom 1.78.79.v50.2 - 1OEM.500.0.0.472560 net-bnx2x 21/01/2014 07:10:23

  >

  > # Confirm the current rule of deployment deploys profile001

  > Get-DeployRule-name *

  Name: DefaultBoot

  PatternList:

  ItemList: {Profile001, cell01}

  If you put all the VIB - names in a single order, separated by commas, then it works fine

  Add-EsxSoftwarePackage - ImageProfile - misc-cnic-register,net-cnic,net-bnx2x,scsi-bnx2i,net-bnx2 SoftwarePackage