HP Mini 210 Ram?

Similar Questions

• using 4 GB of ram for hp mini 210 n2800

  If you use 4 GB of ram on hp mini 210 n2800, I would very well be number of brand and part of appreciate.

  Thank you very much for provding a solution fast, simple, direct, fix my problem.

• maximum ram for hp mini 210 1175nr possible. There are conflicting messages: is it1gb or 2 GB?

  HP mini 210 1175NR w / Win7 (32 bit) starter.  No hardware changes.

  I am interested in increase of the stock 1 GB RAM to 2 GB.  The problem is there seems to be a lot of conflicting information about the Max RAM that this PC can handle.  Site Web of HPs indicates she has a maximum of 1 GB.  There are countless articles on other sites, claiming that it may be higher.  I know that Windows 7 Starter will recognize up to 2 GB, so that shouldn't be the ceiling?  So what - this: 1 or 2?

  Hello:

  2 GB is the maximum.

  See Chapter 1, page 2 of the memorandum on the link below.

  http://h10032.www1.HP.com/CTG/manual/c02241579.PDF

  This can be confirmed by reading the card processor directly from Intel where the 2 GB of memory is shown as being supported.

  http://ark.intel.com/products/49491/Intel-Atom-processor-N455-(512K-Cache-1_66-GHz)

  Paul

• Upgrade hp mini 210-1110eq RAM to 2 GB

  Hello..
  I have a HP mini 210-1110eq with Windows 8.1 Pro (i bought the notebook with win7 starter). I have only 1 GB of RAM. I recently bought a KINGSTON 2 GB 1333 MHz RAM. I updated my BIOS for HP f24 (HP.com said this is the most recent). But when I put it in the 2 GB of RAM, the laptop does not work (I think the cooler works). Someone help me please. Thank you!

  Here are recommended by Crucial memory:

  http://www.crucial.com/USA/en/HP-mini-210-1108tu/CT5626138

  This model has caused support long thread here when he came out about the compatibility of memory. A lot of people had a lot of trouble to get 2 gigs to work right:

  http://h30434.www3.HP.com/T5/notebook-hardware/HP-mini-210-1100-1180nr-memory-upgrade-DDR3-nothing-works/TD-p/287913/page/4

  Apparently, the memory density is a problem. This means that memory black blocks how are on the chip.  Read the entire thread. Crucial offers DDR3-1600 was 8 blocks of memory, not 16 and she is at work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• mini 210-1142cl RAM update

  question, is possible to upgrade RAM with a MHz higher than the computer can handle, 1333 MHz > 667 MHz?

  If so, how?

  I want to upgrade my RAM to the mini 210-1142cl from 1 GB to 2 GB,

  According to the manual, the mini can accept an upgrade to 2 GB, but it must be:

  2GB PC3 - 10600, DDR3-667 MHz, 204 pins sodimm

  Centon 2 GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm, tigerdirect, slightly cheaper.

  and now he has a black screen, and I can't start with F2, F8 or F10.

  What I did:

  1. update the BIOS to F24
  2. upgrade to Windows 7 Ultimate 64 bit, the Intel ATOM chip is 64-bit
  3. went to crucial.com for scanning of memory, and it is guaranteed to work:

  2GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm

  Is it possible to make the 1333 MHz running on the cl 210-1142 mini?

  Yes, it is possible to improve from 1 GB to 2 GB

  Thank you

  I went to centon dot com, the hp mini 210-1142cl is not on their list of supported computers.

  However, I just got a Centon support respoonse and said that part # is compatible to->

  Centon CMP1333S02048.02

  also confirmed crucial RAM

  CT1440459 part number

  Material CT25664BC1339.8FMR

• Upgrading RAM on HP Mini 210 N2800

  Hello

  I was wondering if it was possible to upgrade to 4 GB of RAM with this netbook? Processor-say it is capable if the internet is correct .

  If it is possible, what kind of RAM it would take and would see how much improvement in speed?

  Thank you

  Ryan

  Hello:

  Who worked very well because the number of product has been on the advertising.

  You have the HP Mini 210-4014tu PC

  Link to the product sheet page:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5215163&cc=us&DLC=en&LC=en&query=A9R48PA&tool=

  OK... to answer your question... Here is the link to the service manual.

  Maximum memory is 2 GB. There is only one memory slot. See Chapter 1, page 2.  My understanding is that even if you have W7 Starter, the 2 GB works perfectly. The manual States otherwise.

  http://h10032.www1.HP.com/CTG/manual/c03163704.PDF

  Paul

• Can I have my HP mini 210-2080NR updated with more than 1 GB of RAM it came with?

  I have a HP mini 210-2080NR. I would really like the amount of RAM upgraded fom the he arrived with more than 1 GB. Is this possible and if so, how it will manage?

  Hello

  Yes you can, you can upgrade to 2 GB and because she has only 1 slot you have to throw 1 GB and 2 GB, put on it. I replaced the RAM for my daughter about 2 months back. He encrypted his 28 our Australian dollars and 5 minutes of my time.

  Kind regards

• HP Mini 210-4160-implementation at level of RAM

  Hello

  I bought a HP mini 210-4160 netbook and I want to move the RAM to 2 GB. On-site Polish HP ist note about this netbook and it is written that this Mini supports up to 1 GB. And here my question ist. If this is true?

  If not, how can I buy memory? I have to buy in Poland

  P.S. Sorry, my English is horrible, but I learn

  Hello:

  I think that the memory works perfectly.

  I usually use Kingston memory or critical of myself, but I think I took HP memory of factory on HP laptops which were Hynix fleas.

  More memory in the USA comes with a lifetime warranty. I wouldn't be happy only a 24 month warranty.

  Paul

• HP Mini 210-2070NR RAM upgrade

  I bought a HP Mini 210-2070NR at Staples and wanted to upgrade the RAM to 2 GB.

  Manual says that Windows 7 Starter only supports 1 G of RAM so I've upgraded to Windows 7 Home Premium to try to support 2G of RAM.

  Went to Crucial site, put in the computer model, classified in 2G of RAM DDR3 10600 S, installed and computer won't start with 2 G of RAM in it.

  Deletion of 2G, inserted original 1 G to start the computer to the top.

  I've updated the BIOS with the latest version on the HP website.

  Someone can help me to find a solution to this, or is this netbook on only a function with 1 G of RAM?

  Thanks in advance

  Gaspasser

  You can upgrade to 2 GB of memory, but at the moment, not all DDR3 memory is accepted by the new Intel N455 processor... You will need to order it from HP part Surfer... Here is the link for the same thing... http://PartSurfer.HP.com/search.aspx?SearchText=615863-001

  There is another forum thread, where the user has been able to find particular memory sold by Crucial module which works with HP Mini 210... Here is the link for the same http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=C3C1FEA3A5CA7304

• HP Mini 210-3025 feeding issues its

  Hi all

  This is my first post here, so please forgive me if I'm posting in the wrong section/Council.

  I have a HP Mini 210-3025 AA as a Christmas gift last year of my better half, that I loved and appreciated and never encountered problems with this day (Finally, nothing that I've failed to solve anyway).

  So it's almost a year now and I use it, 2 weeks ago my better half and I went to a holiday and the laptop worked perfectly before that night, and since we were leaving for 2 weeks, I removed the battery (I usually use the laptop without the battery installed in any case, just plug it into the charger) But anyway, removed battery, external mouse and removed flash drives and put in his case.

  This morning after I got home, I tried to turn it on, connected outside the mouse, charger and pressed the power button, but no response... So I unplugged the charger (both supply and the laptop) and reconnected, still nothing; then decided to give the battery a go, which lead to the power led next to the plug of the charger flashes 3 times indicator of low battery. So I plugged in the charger, the red light and should be in charge, but the Start button / stop it turns not again, waited 20 minutes to try again, still nothing, tried with another charger, still nothing!

  Finally I let the battery charge and it was fully charged, but now he is dead yet and I can't turn it at all! Although the battery is charged!

  For a person that most people consider a "geek", I have no idea of what the exact problem is, initially I thought that it could be the power button, but when the power led blinked by pressing it stack installed earlier I ecxluded; thought it could be the charging circuit for not working after 20 minutes, but now it is fully charged, still does not!

  I tried the hard reset, but it doesn't seem to change anything

  I am a very careful person with my stuff, so nothing has been spilled on my laptop, or something like that, but now I have a major problem happening for obvious reasons! And it's a gift from my better half which means I want to return to work just because this isn't just a laptop to me!

  Any ideas/suggestions are appreciated.

  I was not sure from your post if you had been able to reset or not.  However, thank you to try my steps even if you tried this solution in the past.
  
  It is difficult to identify these kinds of questions.  However, I think that your motherboard may be at fault here.  I'll try to explain why.  Battery (seem to) load normally so we can assume that the AC adapter and the battery are in working condition.  However, even with a charged battery, you get no response from the laptop.  With other kinds of issues (bad BIOS, bad RAM, etc.), you will get a SHIFT CAPSLOCK or Numlock blinking code which indicates the problem.  If it was one of those pieces of equipment that has been loaded you would receive a different set of symptoms.  Unfortunately, I can't speculate on the cause of the failure.
  
  I think your best bet is to have the laptop repaired.  You said that you have already started the process to have the laptop repaired through HP.  It is the best option in my opinion.  Just in case where you do not have information you can directly join the HP Support at 1-800-474-6836 for the United States / Canada.  Other areas will have to visit HP's Support around the world to find their contact information.
  
  If you have any other questions, feel free to ask.  Enjoy the rest of your week

• Mini 210-1014ea: Wifi does not not on HP MINI 210-1014ea

  So I've upgraded to windows 8 last year, it was quick but then day after day, it became slow. This laptop has 2 GB of ram and a 64-bit, Intel atom N450 processor. Given that windows 8 has been slow, I have dedcided to install windows 7. So after that I installed, all drivers worked very well EXCEPT FOR MY CONNECTION WIFI. After more than a week of fighting, I tried to update my drivers and do a lot of things. But my wifi it says "no connection available. Ethernet only works. Well, I installed the latest updates in Windows update. Right now I have the latest Broadcom 802. 11 b / g network driver. Version 5.100.xxxx. I tried to uninstall the driver from Device Manager, but even then I can't search for networks wifi, infact it doesn't show all the wifi networks.

  @jass007 ,

  Hello and thanks for the display on the HP support forums.  A question when you did your installation of Windows 7, so that installing your drivers that you start first of all with the Chipset Driver.

  The reason for this, it's a bit like a traffic COP for all the other drivers on the system.  I've seen this cause of conflict with common devices and even up to the point where they are not even appear in the Device Manager.

  If you can make sure that you back up all data.

  Once this is done go to the systems support page and download all the software and drivers and save it on a USB key.

  HP Mini 210 - 1014EA PC - software & drivers

  Once it's done Windows Safe Mode startup.

  Enter SafeMode (Windows 7)

  Once you're in safe mode, that you want to remove all your drivers.  You may need to uninstall one at a time and restart between uninstalls.  Don't forget to start mode without fail every time.

  When all the drivers have been removed.  Start Windows again normally. Here, you will need to install the drivers one at a time.  Be sure to start with the Chipset Driver first.

  Please let me know how it goes for you.

  Thak you again for the display and have a great day.

• Upgrade memory - HP mini 210 3000SD

  Hello

  I have a HP Mini 210-3000SD laptop. The HP support page says the RAM is expandable up to 1 GB, but I saw that a cell phone even has been upgraded to 2 GB.

  Mini Apparanetly hp in the series have the same thing too, hp support page says up to 1 GB, but in fact, it was possible to upgrade to 2 GB.

  My guess is that I have to use a special type of DDR3 RAM, anyone have advice?

  Thank you!

  daniel71317 wrote:

  Here is a link to the manual for this PC series portable:

  http://h10032.www1.HP.com/CTG/manual/c02987479.PDF

  If you look at the section of the Ram, you'll see that the laptop will support up to 2 GB of DDR3-1333 MHz ram. There is one slot memory, so the chip you buy must be a 2 gb chip. You can also go to www.crucial.com and download a tool they have there that will scan your system and give you ram and disk hard upgrade results specific to your system.

  Thank you, the Manual Guide to different Rams depending on the operating system for most windows. I have a debian (linux) on my mini hp computer... could this be a problem?

• HP mini 210-1080 NR

  Can someone tell me if the HP Mini 210-1080 NR can accept additional RAM?  It comes with 1 GB of RAM and want to upgrade to 2 GB.  The specifications of the card of 2 GB sold by HP is MgHz, DDR2, PC2-6400 800.  I have a 32 bit OS (Win7).  I tried to install the 2 GB RAM card sold by PNY, but never started netbook, so I thought that maybe this netbook does not take an upgrade.  Many sites say it should, but none of you out there don't know if this is the case - and if there is a memory card with different specifications, should I use?

  Thank you, Cindy.

  It was an honor to serve our country in the USCG.

  Please post back and let us know if you have better luck with the upgrade memory in your Mini the second time around.

  Best regards

  Paul

• HP Mini 210 - 1010NR black screen

  Hello

  I have a HP Mini 210 - 1010NR which has recently stopped working. I ran several diagnostic tests. This is a summary of what I've done and found:

  First of all, I did a hard reset of the netbook (with power with no battery). There was no positive outcome. I followed this test by testing the hard drive and ram. To test the hard drive, I plugged into my office and did a disk check. The results showed that the car was functioning properly. To test the ram, I have used DDR2 ram from another netbook I and tested the operation of the broken netbook. It was still broken. Finally, I noticed the caps lock button was flashing on start up. I looked at the result of the error. It flickered once every couple secconds. This meant that it was an error of type 1 (CPU failure). How to test a CPU failure and would it be possible that it is something else the CPU or the caps lock key blinks once every second torque means that there must be a failure of the CPU.

  Thank you

  Hello ems316, welcome to the Forums of HP.

  Thank you to provide detailed information on the already tried troubleshooting.

  Regarding Notebook and question it if it is a failure of the CPU, based what you have described with this document: computer does not start and the lights blink or the computer will beep (which can be the one you found). That would be a problem with the central unit. In line with the recommended best option would contact support to see what repair and replacement options are available.

  I'm sorry for the incontinence might cause.
  Thanks for posting on the HP Forums.

• HP Mini 210 - 1084TU empty is displayed and does not start F10 F2 doensnt work

  When I turn on my HP Mini 210 - 1084TU food cover shows caps lock shift light is solid and the button not fuction - the screen appears blank and not push further.

  What I tried was:

  1 hard reset - 3 times

  2. by pressing f10 or f2 or f11 on power but nothing happens

  Please, guide...

  Found the solution...

  removed the battery cover and just removed the RAM... rubbed with the square of the Eraser again and removed the battery inside waited some time and place it again... and the system is reset... it works... all my data is safe!