HP Mini 210-3025 feeding issues its

Similar Questions

• HP Mini 210-3000

  I have a HP Mini 210-3000 got my son, it works fine but now the user profile is not recognized at startup and I can't get past the password, the password is accepted, but the message "the service user profile Service has no logon. Failed to load the user profile"I was HP Advanced System Diagnostics and the machine passes all of the Tests such as Start UP, hitches etc.

  The Bios CMU however not to update or restore as update is not available

  How can I fix the user profile so that I can open a session?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Install windows xp in hp mini 210 1010NR, help me please is urgent...

  How can I install windows xp in hp mini 210 1010NR... I tried to install windows xp service pack 3, but I could not, can someone help me please its urgent thank you...

  You need to integrate the drivers Sata ( ICH7M/MDH SATA AHCI ) and burn a new cd XP with nLite.

  Here is a guide showing how to integrate and here are the drivers Sata . 7-ZIP or Universal Extractor are good out of the installer.

• Mini 210% of the battery cannot go > 75%

  Hello. I have a mini 210-2036TU for<2 months.="" i="" recently="" just="" noticed="" that="" my="" battery="" percentage="" indicator="" cannot="" go="" higher="" than="" 75%.="" last="" night="" i="" charged="" it="" while="" the="" notebook="" is="" turned="" off,="" and="" the="" charge="" light="" indicator="" (orange)="" was="" on.="" however="" in="" the="" next="" morning="" the="" charge="" light="" indicator="" still="" shows="" orange="" (as="" far="" as="" i="" know="" when="" the="" batt="" is="" fully="" charged="" the="" light="" indicator="" should="" turn="" blue).="" i="" did="" though="" update="" the="" bios="" recently="" to="" fix="" the="" missing="" home="" end="" pgup="" pgdn="" keys,="" but="" still="" not="" sure="" whether="" the="" bios="" update="" is="" the="" root="" cause="" of="" the="" battery="" charge="" issue.="" does="" anyone="" have="" the="" same="" experience,="" or="" know="" any="" solution="" to="">

  Problem solved by following these steps:

  1. Unplug the AC adapter / CC & remove the battery from the laptop
  2. Press the power button and hold for 60 seconds
  3. Plug the power adapter, put running the laptop and let windows start
  4. Leave it for 5 minutes then shut down windows
  5. When the laptop is turned off, insert the battery
  6. Turn the laptop computer, start Windows, and the battery indicator in the Windows taskbar should now display the battery level indication

• HP Mini 210-4000 blue screen of death PAGE_FAULT_IN_NONPAGED_AREA Error

  I've been up and down the Forums here with no specific luck, unfortunately, so I'll ask even if this has been asked and solved in another part of the site that I may have missed.

  I'm trying to untangle HP Mini Notebook a friend, model HP Mini 210-4125sa. The machine starts well enough until last week, when it was suddenly decided to blue screen.

  The text of the error message displayed in the BSOD reads as follows:

  PAGE_FAULT_IN_NONPAGED_AREA

  TECHNICAL INFORMATION:

  STOP: 0 X 00000050 (0X87E40000, 0X00000000, 0X00000000, 0X92442B13)

  I can't start after loading Windows 7 - the load bar screen makes two fifths upwards and that's all.

  I had thought to try to recover the operating system, if possible, of what is apparently a recovery partition that is created on the hard drive (I have not worked with these machines before, unfortunately), but I can't figure out how to get to that partition before the typing error.

  In addition, after trying to download a piece of software of HP USB recovery Flash Disk Utility, I realize it seems necessary to use it in fact of the computer laptop itself, that is not possible.
  Having begun to run various tests on board in the menu of the BIOS, the hard drive Test failed just apparently (more specifically the hard drive part optimized DST test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood). HP unfortunately were not a lot of help as they wil only offers unique support technician call for forty pounds, or to take the laptop away for repair, which cost almost as much as the original of the material costs. Of course, I prefer to try and resolve this issue myself but have hit a bit of a wall at the present time. Any suggestion would be great at this point.

  This test equipment for the hard drive is a gift died of a faulty element. A failed hard drive is a show-stopper.

  Hard drive optimized DST part of the test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood) This is important information.

  A corrupted NTFS (hard drive) volume can also generate the "error PAGE_FAULT_IN_NONPAGED_AREA" stop message.

• Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

  HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC

  Some specifications:

  Display: 25.6 cm (10.1 ") diagonal WSVGA LED HP BrightView Infinity Widescreen Display (1024 x 600) SUBMISSION

  Battery has been dead for a long time.

  My display drivers and BIOS have been recently updated from the HP website.

  After a power failure and a reboot, the screen looks weird. It was moved about an inch down with a black border at the top, on which the mouse won't and the task bar is not visible, as is the bottom of the screen.

  When I go to the screen resolution in Windows by right-clicking on the desktop resolution is set at 1024 x 768, when I click on advanced settings, the monitor tab, monitor is set as a Monitor (1024 x 768 60 Hz) generic Non-PnP.

  When I change to 1024 x 600 it seems blurred and stretched vertically, but the screen is always shifted down with black border on top.

  When I get the Intel graphics settings I can make the same changes as in the dialog Windows (640 x 480, 800 x 600, 1024 x 600, 1024 x 768).

  In image format Options when I select full-screen (non-frontiere) the black border is fixed but always tense vertical screen but the screen is cut down with no visible taskbar.

  Graphics driver reinstalled so that some Type Monitor of windows drivers, nothing changes.

  When I turn on the laptop, the screen HP Quickweb appears also as a 1024 x 600 stretched vertically without black border at the top but will disable the display down.

  It seems that Windows and Hp Quickweb see at 1024 x 768 60 Hz display after the power failure.

  Before that, I had installed Windows updates, but nothing on the display drivers.

  I only got a point system restore leave on earlier that day (very low disk space?) but that did nothing.

  Guess it is a registry/driver issue since no pixel is bad and the black border on top is set in image format Options when I select full-screen (sans-bordure). Any suggestions please?

  Of the information system

  Model: HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC
  Name of the operating system: Microsoft Windows 7 Starter 32-bit
  Version: 6.1.7601 Service Pack 1 Build 7601
  The version of the BIOS/Date: Hewlett-Packard F.24, 18/03/2011

  Display:
  Name: Intel(r) Graphics Media Accelerator 3150
  PNP device ID: PCI VEN_8086 & DEV_A011 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 10
  Adapter type: Intel(r) Graphics Media Accelerator 3150, compatible Intel Corporation

  Name: Intel(r) Graphics Media Accelerator 3150
  ID device PNP PCI VEN_8086 & DEV_A012 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 11
  Compatible adapter Type not available, Intel Corporation

  SOLVED.

  After noticing the OS startup screen/HP resolution looked normal, I just removed the plastic bottom and hit the CMOS battery, after reading this somewhere, because the audio drivers and webcam have been uninstalled too whenever I rebooted the netbook.

  He has not moved even because it was recorded well.

  So I restarted and the resolution has been set.

  Now, can't make the webcam work even though I reinstalled the driver...

• HP Mini 210: Sound silent light 'stuck' on

  This computer was initially provided with Windows 7 Starter. I recently uppgraded to windows 7 Home Premium, 64-bit.

  Initially, I had bad turn the wi-fi/bluetooth radio.

  Now the radio will function correctly but the volume mute led is on, but the sound of the computer is not cut.

  I can turn off the sound by using the icon in the system tray.

  Any ideas?

  I know it's a little slow, but a bit boring.

  Thanks in advance.

  Here is the final verdict which has solved the problems for me.

  Computer: HP Mini 210 t-1000

  Operating system: Win7 (originally shipped with Starter - 32 bit; upgraded to Home Premium 64-bit edition)

  All other parameters are OEM

  When the Home Premium 64-bit Win7 was installed there are a few problems of key board because the sound has not might be cut from the keyboard (stuck on silent light) and wi-fi/bluetooth could not be extinguished (taped to light; required function two presses of the key wireless turns off).

  These two issues have been resolved, thanks in part to the good advice of HP Support Agent D5GR!  View to look at the pilot sets put me on the track of successful correction gaps.  Note: I was very careful to replace the chipset drives until I did research more. That would be my last option.

  So, my first step, then, was to look at all the drivers of the computer. D5GR has provided the link (see his response me above/below) by pilots.  Given that the original machine is equipped with a 32 bit OS, I excluded all the "32-bit only" downloads in this section.  That included the driver chipset - BTW

  Then, I downloaded all the drivers and utilities that were compatible with the 64 bit OS.  This includes the audio driver (sp49308.exe), wireless driver (sp48591.exe) for the Broadcom adapter installed and the Wizard (sp45222) wireless. There are a couple, but I didn't feel that they were relevant to this situation.

  After each installation, a reboot has been accomplished.  When I had finished all the problems have been corrected; the computer works perfectly.

  Finally, it should be noted that when a retail upgrade (not HP) is installed, there are the features expected that are not addressed in this upgrade - it is usually an OEM "generic."  These gaps must be filled with the provided HP solutions for the specific computer that you are upgrading.

  That is my lesson learned in a few words.

  Once again thank you D5GR for your advice and continue.  HP; the only way! ><>

• Ask.Hyper Threading Hp mini 210-2037 you?...

  Hello, I just bought my mini 210-2037 Tu, evrything just beautiful, then all of a sudden Im wondering this netbook can't do hyper threading mode, even if the processor, takes in charge only mode

  I ask for help, its possible for my mini got hyper threading mode? and how to get there?... if its

  Thanks a lot before hand...

  Well even if I don't have the answer to my problems, but still this forum very useful to ask and understand our problem, I m really grateful because the forum.

  recently I can solve my problem on hyper threading fitur on my mini

  with/without a doubt I'm going to share some of my tips here

  (refer to my son, ' Activate Hyper Threading fitur on HP mini 210-xxxx proc n550 ")

• HP mini 210-keyboard

  Hello

  Please help with my HP mini 210-1120sw - RET, space and enter keys doesn´t work.

  Yesterday, sometimes after that I tried to calibrate the battery.

  In the BIOS mode works the key 'Enter' correctly (space and BACKSPACE I Don t know).

  Now I m using the "keyboard on the screen," which is very stupid...

  Help, please!

  Vladimir

  marge1961 wrote:

  Hi erico,.

  Sorry for my delay, I had a few days of vacation.

  Well, done sfc/scannow, "system fixed some corrupted files", but the result with the keyboard is always the same.

  The external keyboard via USB works fine.

  Some ideas of another?

  THX in advance

  Vladimir

  Is your mini still within its warranty period?

  If Yes, contact HP.

  If not, buy a replacement keyboard and replace it. They are not very expensive. The reference is in the manual that I linked to in my previous post.

  Best regards
  ERICO

• Power on password for HP Mini 210-1010NR

  I just bought a used HP Mini 210-1010NR on e - bay.  When I turn on the monitor, she prays for power on password or administrator password.  How do past this to use the computer?

  Hello

  Enter: 60780900

  Kind regards

  DP - K

• Mini 210: the mini 210

  Hi guys.
  
  I have a HP mini 210 which I use mainly for internet when they travel, but also for playing iTunes for house music when I execute concerts. Last week the on the key sound turns power on and off remains permanently lit. If I hit him, the o/s tells me that his is switching on and outside, and yet there is no sound on the internal speakers or headphones if I plug them in. Device Manager tells me that the sound is very good, icon audio system looks very happy they control noise. You can see the icon switch between sound off (with the cross inside) and suite. Supposedly I can adjust levels. But no sound, and the orange light on this key remains resolutely. It makes me think that it is not material, but a software problem. All the latest updates are on board.
  
  Met someone with something like that before or have an idea where to find the next?

  See you soon

  KeV

  Hello @kevgl,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I stumbled upon your post on sound level and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  In the meantime, have you started having this problem before or after the upgrade to Windows 10?  Try to review the following document and let me know how it goes:

  HP - no sound from speakers (10, 8 Windows) laptops

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP mini 210: System disable the code 67207008

  3 incorrect password, System disable code 67207008 HP mini 210. Help

  Hello

  Enter 78165028

  Kind regards

  DP - K

• HP mini 210 computer: network controller driver

  Hi, I need a driver for network controller for my computer hp mini 210. If someone could post a link where I can get it. Help, please!

  Try this one... the one I gave you above might be too new for the revision of the Ralink 5390 a laptop wireless card material.

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp55715.exe

• HP mini 210-1170NR: not found network controller driver...

  up to what a week ago I was still able to connect to the internet via a wireless connection... so when my friend formated my laptop I could not connect wireless but I can always connect cable... then I tried my laptop what was wrong then I discovered that he was missing the network controller driver...

  What should I do?

  Hello

  The following link has all the requried drivers for your laptop, including wifi drivers, find out wat wireless card is installed on the device, install the respective drivers.

  http://support.HP.com/us-en/drivers/selfservice/HP-mini-210-PC-series/4151684/model/4221571#Z7_3054ICK0KGTE30AQO5O3KA30R1

• HP Mini 210-2080ee recovery media

  Asked me to retrieve a defective HP Mini 210-2080ee with a hard drive.

  I can't source a recovery DVD or USB because the machine was bought in the Middle East and media are not available in Ireland or the United Kingdom.

  Any suggestions welcome

  USB with all the necessary software from Czech Republic delivered by DHL on Wednesday.  Thank you very much for your quick response.

  System in place and works perfectly