Trackpad not scroll

Similar Questions

• Magic Mouse 2 is not scrolling

  I just bought a Magic Mouse 2, and when I drag my fingers on it as indicated to scroll, it does not scroll vertically or horizontally. I read the instructions, watched videos... nothing. Check the settings and everything. Please help me fix it!

  Hi there sepowers51409,

  Looks like your Magic Mouse 2 is not all scrolling when you drag a single finger upwards or downwards at the top of the mouse. First, I would check to see if, perhaps, the scrolling speed is set at a minimum, which could make it appear as if the scrolling does not work.

  Change the way your mouse works

  You have another computer to test with to help us to isolate and fix the problem? Don't forget to UN-pair he from the current computer if you do, so that it didn't is no complications when you test.

  If you want to remove (désapparier) a device from the list of devices on your Mac, follow these steps:

  1. Choose the Apple menu > System Preferences, and then click Bluetooth.
  2. Place the pointer on the device you want to remove, and then click the button which appears next to the device name.

  From: using a Bluetooth mouse, keyboard or trackpad with your Mac

  If you do not have another Mac to test this then I would be:

  1 UN-pair the mouse with the above steps

  2 remove the batteries

  3 reset the PRAM on your computer

  4. replace the batteries in the mouse

  5 pairing and testing new scrolling.

  If the problem persists can create a new admin user or test this point to another user, you may have on the computer?

  OS X El Capitan: set up users on your Mac.

  Thank you for using communities of Apple Support, let us know how it goes!

• BlackBerry Smartphones Trackpad not working not

  Please help so I received a text message on my blackbery 8520 and I entered the password as usual and the trackpad would not move, I couldn't scroll but I could click but does not scroll please help.

  Ok. The problem can be well mechanical.

  Open the rear cover and remove the sim card and the battery. There is a small rectangular stainless steel metal plate which is the cover for the touchpad. On the left side of the plaque next to the sim card is a small sweet white piece of sticky paper covering a torx screw that holds the plate in place.

  Use a torx screwdriver with a bit of size of T5 and carefully remove the screws, remove the metal plate, then reinsert and replace and tighten the torx screw. You will find that the screw was loose and the plate cannot have been firmly in place. It may solve your problem for good as a loose torx screw prevents the touchpad or the optical block to make the necessary full contact inside this cover.

  Make sure not to lose the very tiny torx screws while working on this topic. You can get a torx screwdriver very cheap with a set of bits of miniature for a few s all about £ or $' s. make sure there is a bit of T5 in the game.

  A temporary solution that could help until you get the right screwdriver is to put firm pressure on the cover of metal plate with your finger. This does not work for a while but the gel always returns.

  Another fix recommended by some is to remove and reinstall Blackberry software, but is not a reliable solution, given the issue of loose screws. The only real difficulty is to follow the procedure above, as long as your touchpad is not physically defective and must be replaced.

• 10 iOS safari screen do not scroll when you type text

  After the iOS10 update, Safari is not scroll when I m typing text in a field text as here in a forum. I have to scroll the screen by hand for the position where type I´m. it occurs only in Safari, for example Pages works fine.

  I use an iPad Air1, but have the same on my iPhone running iOS 10 6.

  Is there any solution for this?  Thank you.

  Hello Toy4ever,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to effectively tap on your iPad, and I want to help you get things working again.

  What I would recommend starting with a reboot of base and if the problem continues, you can reset the settings on your iPad. Despite the fear two-step attention, this does not affect your data. All of your content will remain intact.

  You can always save your settings in iTunes or iCloud data before doing this reset. This link will guide you through backup if you choose to do so: https://support.apple.com/en-us/HT203977

  What this does is actually reset some of your settings to factory default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & wallpaper and privacy, so we will have to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If the problem persists, the entire community is here to help.
  Best regards

• trackpad not properly followed in early 2008 macbook

  So I got this macbook early 2008 quad core, but the trackpad not work properly or 'Track' the mouse properly. What can we do?

  Reset the SMC did the trick.

• Why Firefox does not scroll the page when choosing & the cursor reaches the bottom of the screen

  The selection of text on a page of the screen when the cursor reaches the lower edge of the screen in Firefox (version 9.0.1) does not scroll. Other programs (including IE) do, so it doesn't seem to be a local computer problem.
  I don't see a setting in the page options that enables / disables this then what is the solution?

  Activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Touchpad on the laptop does not scroll upwards or downwards

  The touchpad on the laptop does not scroll upwards or downwards, I was offline for 5 weeks that my router broke out between the change of operator, so I had to wait for another.
  When I was on the touch pad was'nt working properly. I can't do a system restore, because that would be the former provider. Ideas anyone please?

  First, check the scrolling settings in the advanced settings of Touchpad.

  If they are enabled, uninstall the mouse/keyboard 3rdparty as Logitech or Microsoft and Watcom drivers that may have installed you.

  If it's no good, uninstall the Toshiba touchpad driver, then download and install the latest version.

• Installed Firefox 3.6.10 now my mouse wheel does not scroll

  I just installed FF 3.6.10 update, and now my mouse wheel does not scroll. I checked my settings of the mouse, and everything is OK. Mouse wheel scrolls in applications non-Firefox, including offline and IE records online. The mouse wheel has worked well with the latest version of FF. Also tried to plug in a different mouse, (mechanical an old man to whom), same problem. If this cannot be corrected, how to uninstall the last update and revert to the previous version?

  Please read this article to see if it helps:

  https://support.Mozilla.com/en-us/KB/cannot+scroll+with+mouse+wheel+or+touchpad?s=cannot+scroll+with+mouse+wheel+or+touchpad+ & As = s

• Satellite A305-S6872 - touchpad does not scroll

  Hello

  Just a few days before I had my TOSHIBA A305 - S6872 frm U.S.
  But my there is a problem with the touchpad.

  The touchpad works well, but it is not scrolling.
  Kindly if someone know about this problem then pls solve this problem.

  Previous answer will be grateful.

  Thnks.
  Saad.

  All the drivers, you can find on [www.csd.toshiba.com]-online downloads. Here you must search for Satellite A305-S6872 and you will find the driver.

• computer laptop 15-r028TX: laptop mouse pad not scroll

  Hi I use a hp 15 notebook pc r028tx...

  my touch pad is not scroll and even show no matter which setting to change...

  It's also not showing one of its features shown here before like, if you drag the left edge, you can switch between the windows...

  I would be grateful for your solution

  HI @vivek_kallakuri ,

  Thank you for your request, I will do my best to help!

  I understand that your TouchPad is more you to scroll with it.  Here is a link for the use and troubleshooting of the TouchPad and ClickPad (Windows 8) that will guide you through a step to try.

  Have you tried Automated fault (Windows 8) research?

  Did you run the HP Support Assistantsince that happened?

  If it was a recent change you might consider doing a restore to where he worked.

  Using Microsoft System Restore (Windows 8)

  You can also try a Refresh Your PC to solve problems (Windows 8). This will reinstall the OS and should not affect your personal files.  I recommend doing a backup first just in case.

  You can consider contacting HP support for assistance that they can connect remotely to your system to help solve the problems.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  The last thing I can suggest would be to do a cover of the plant. Performing a recovery of HP (Windows 8) system

  You will notice there is an option to make a backup during this process, if you don't have one I suggest you do one now.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  Good luck!

• HP Photosmart C3180 all-in-One does not scroll on glossy photo paper

  Printer all-in-one HP C 3180 will not take paper glossy photo Copier. I hear the gears rolling, but it doesn't pull in the worksheet. It will take regular paper and Matt paper thick. I use only HP advanced photo copy paper. Are there adjustments for scrolling? Any help would be appreciated.

  I was able to identify the problem and solve it somewhat. Settings of the printers were very good; no paper jam, etc.  It is the rear access door.

  Glossy paper would not scroll until I pushed on the RAD. I just have to hold it down until the paper begins to scroll, so I withdraw my hand. Find out where the problem is I should be able to jimmy-rig it (ahh... Yes, duct tape!) to hold in the FDR. Nevertheless, Cheetah12, I appreciate your suggestions.

  alpha2566

• Pavilion dv7: Hp Pavilion dv7, synaptics pointing device do not scroll after windows 10

  After the upgrade to windows 10 my mouse does not scroll. I've updated the driver, without help. I uninstalled and reinstalled it, no help. I drove back from the driver, any help, I don't reupdated the driver no help, I deleted the system whole synaptics and it not redownloaded from their Web site, no help, updating the driver again, no help. I then went live... help the technician did an update again... without help. I went to the live help again and technician did a cleaning/repair of the system from the command prompt, no help (I then abandoned with live help) and yes the scrolling option is checked in the settings. Please can someone help me.

  abracadbra ive got mine working!  is a long time try this then try to stay with me and forgive me if I get a lil confusing...

  go to your add/remove programs and remove the synaptics program

  you have to restart... it will say: it will not work or possibly used... your fixed points of the mouse and click on

  Once it's done and your back on the desktop click your search in the web area and windows at the bottom left at the beginning

  type restore and click on Recovery Manager

  under I need help immediately, click the driver reinstall (second option down in the first column)

  follow the signs from there

  or sorry for instructions long but you can also use the hp support assistant, click diagnostics and tools, keyboard and mouse from the evil that pulls up which one is troubling you and it gives you a way I tried and did not work so I said no and he gives me the second option which is above... Please let me know if it works for you...

• Problem with Microsoft wireless mobile mouse 4000 scroll will not scroll on any computer?

  My mouse does not scroll vertically, but it scrolls horizontally. I tried different mouse on this computer and they are all scroll very well and I tested this mouse on different computers and it won't yet scroll. I followed through all the utilities provided on this site (checking the HID, reinstalling the software, verification of parasitic programs, etc.) and nothing has worked. Is there something else I'm missing?

  Hi Vjenkins,

  As the mouse does not work on different computers and other mice work on this computer, it seems that there is a problem with the mouse itself.

  Sinceyou have followed the steps mentioned in article to resolve problems with the mouse button or scroll the parameters, I would suggest that you contact Microsoft hardware support for further assistance.

  Hardware support

• my built-in touchpad mouse will not scroll down

  original title: mouse Touchpad

  I was searching in the control panel and uninstall some programs from Microsoft (like a total fool!) and now my built-in touchpad mouse will not scroll down.  I have to use the arrows on the far right of the screen to scroll up and down.  Integrated on my lap top touchpad scroll upwards and down.   Any suggestions?  ASAP please!

  If you have a Dell, I can show you step by step. Options in Dell are not the same as the other makes it necessary.

  In general...
  Right-click on an open office space > Personalize > mouse pointers (Yes! of the mouse pointers) > from here, you will have to consider for theParameters of the Touchpad > if found, click it. Then, search equivalent of 'change settings button scroll '. If found, click it. Then, see if the "Activate " box is DISABLED. If so, check it out > OK

  See screenshot...

  

  t-4-2

• Screen not scrolling

  Hi, I'm developing an application for OS 5 to 7.1.  I have a help screen that can be called by the user. This help screen simply adds a bunch of fields of the label to the screen. For OS 6 and higher, I can scroll vertically without problem. But for my OS 5 models, I can not scroll at all.

  I guess the problem is that screen extends ScrollView and ScrollView was released in API 6.  So, how to let the user scroll areas of labels to the API 5?  I have to add nullfields which are focusable?

  Thomas.

  There was a change in OS 6 No spotlight fields scrollable.  So for OS 5.0 adding a NullField would solve your problem.

  As developer_aman_arora suggested, another solution is to make your active LabelFields.

  But for me a better solution is to use RichTextFields instead of LabelFields which allow scrolling in all levels of the operating system and to give a visual indication of where scrolling is actually.  And then you get scroll line-by-line for several fields of text on line too.