HP MINI: OPERATING SYSTEM NOT CONFIGURED

Similar Questions

• I received an error message: operating system not found. I need to reinstall Windows, but do not have the media. How can I request media?

  "OS not found"

  Hello... My laptop out there today and I'm trying to start it, it says "operating system not found '... I guess I reinstall windows Vista but I can't find any cd/dvd... I dontt think that I was given when I bought my laptop a few years ago... Do you think I can get another copy (free of charge)) L

  Hello

  If you have never received a recovery disk when you bought your laptop there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Also some manufacturers have more available recovery Vista disc.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

  Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

  I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

  Check the connection of the cable! PXE - MOF:
  exit Intel PXE ROM.

  Operating system not found
  Backup of disks were damaged
  starts from disc downloaded ubuntu, so no problem with a hard drive.
  Cannot access then unable to return to the last good configuration safe mode?
  where can I download vista to reinstall?

  Hello

  Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Read the responses in these links on the false boot order and network devices.

  http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

  http://www.computerhope.com/issues/ch000706.htm

  See you soon.

• Operating system not found - Windows 7, Sony VAIO

  When I start my laptop, it gives the error operating system not found. I have a repair disc, a recovery disk and also a backup system image. I am able to do nothing, as the laptop does not go past this message. In the past, I used to get this error once or twice daily, but when I re-set with Ctrl + Alt + Delete, the system would begin. No critical errors were found in the Eventlogger. How to start the repair process?

  Hi vasanjs,

  1. did you of recent changes on the computer?

  This problem may occur if one or more of the following conditions are met:

  (a) basic input/output system (BIOS) does not detect the hard drive.

  (b) the hard disk is damaged.

  (c) sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

  Note  Some third-party programs or alteration of the disk can damage an MBR.

  (d) an incompatible partition is marked as Active.

  (e) a partition which contains the MBR is no longer active.

  Method 1

  I suggest you update brings input/output system (BIOS) to the latest version by contacting the manufacturer of your motherboard or computer and check if it works.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Method 2

  If the previous step fails, then I suggest that you perform repair system on the computer and check if it works.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OPERATING SYSTEM NOT FOUND VAIO

  I shut down my computer before going to bed and now when I turn on the Sony Vaio Windows 7 it says Vaio then says operating system not found. I tried to use the Windows restore USB, nothing, so I tried to repair CD, he worked went to PC repair but said my score is not correct or my HARD drive is locked. Someone at - it something that can help?

  Start you the installation media or retrieve the stick and then follow to access Advanced Startup Options in Windows 8 or 10 to run the Startup Repair tool?  This error message do you have?  Please take a photo to fix reply or write verbatim.

  When you start the BIOS configuration via the "F2" Sony, the hard drive is detected under devices in the boot order or storage?  Place first in the boot order, trigger repair/installation media using the F12 key only.

  If the hard drive is not detected, see if you can reinstall it until it comes.  If she will not appear so you can try to connect to another PC to see if we can read enough to save files, or his test condition.  Then replace it with a SSD which is the best upgrade, we can give a PC - quick as lightning.

  If she appears to run the amount shown on the HD diagnosis extended CD scan to ascertain the condition of the hard drive.  Confirm with a full disk check run from the Startup Options kick command prompt.

  You are able to execute all other advanced boot Options: restoration of the system, or Reset after saving all files that are not backed up following rescue files when Windows does not start.

  If all else fails, see if you can run the recovery Vaio, or make a clean reinstall Windows 7

  Although there are major obstacles now to get the updates of Windows running after a reinstall.  You would be better if the PC meets the Spécifications 10 Windows to do a Clean install Windows 10 improvement before the expiration of the offer, using the Windows 7 product key after installation to activate.  These steps have been used by tens of thousands of consumers without a single complaint - it's the best possible installation of Windows, you can get.

• Sony Vaio in operating system not found?

  I have a laptop Sony Vaio, model SVE14AJ16L number and I got a new drive hard since the hold had ceased to function. I didn't need all the files on the old drive, so I just jumped out. I installed the new drive, but then did not work the Assist button. I googled this and I couldn't find a solution. I need to install Vaio care, but cannot find the Vaio care for my model number. I needed to install Windows 8, but for some reason it wouldn't detect the DVD or USB. I made the USB drive bootable using rufus and I downloaded an ISO and intended to put the serial number on the bottom of my laptop. It looks like all that operating system not found. I can't go into the BIOS, because that's what the assist button, and it does not detect. The towers of DVD and USB activity led blinked his eyes, but nothing. I don't know what is happening. Even when I took out the hard drive and put in the DVD/USB, it seems still operating system not found. I can't find the model number on this site.

  TL; DR
  Installed a new drive, HELP does not, does not detect a bootable USB/DVD, appears only as an operating system not found. I made bootable USB/DVD and tested on other computers.

  Please help, thanks.

  Basically, I don't have your system to test, so I'm just guiding you the general procedures.

  First of all, FORGET the ASSIST button. To explain the question "why?" would take a lot of time and goals here is to install new windows in your new drive.

  Secondly, I highly recommend you have all the necessary drivers for your equipment before your proceed with the windows installation 8 or 8.1. I own VPCSB28GG and Windows 8.1, several functions DO not work properly as it does in Windows 7. So, unless you have a deep knowledge on the computer, do not go for windows 8.1 yet or at least try to install windows 8.1 on a different drive for a test run.

  Thirdly, I strongly recommend allows you to install Windows 7 USB stick / 8 / 8.1 since the DVD player is not a reliable source from USB. Microsoft also provides tools to help people installing Windows 7 / USB 8.x. Please google it.

  As the symptoms that you have described, I recommend the steps as follows:

  1. go in the BIOS / settings (by pressing F2 during POST) UEFI. Under start options, your system may use a different name, but in principle it is similar to this: '1 ST Boot Device' "2nd Boot Device" "3rd Boot Device"... and so on. The value '1 ST Boot Device' your desire, such as CD-ROM bootable media, DVD-ROM, external USB/HDD. In my case, it is an external device because I use USB boot Windows 7 / 8.x installation. The "2nd Boot Device" in the HARD drive internal value. Drive HARD internal is your disk newly installed (or current).

  2. run the windows installation wizard. During the installation of Windows, your computer may restart several times. However, AFTER THE FIRST USE, you must go to the BIOS / UEFI with once again. The value '1 ST Boot Device' internal HARD drive. If you forget this step, you will encounter a loop of Windows installation. So, I suggest to pay attention pls. After that Windows Setup is complete, you can install drivers for your system. Find it in Support to the Sony Web site. You will need to download the Windows 7 drivers for Windows 8 as Intel Management Engine, components Sony blah blah blah. Please keep in mind, Vaio Care cannot make you suggest.

  3. in the installation of Windows, you won't find your HARD drive to destination of installation. In this case, go to the BIOS / UEFI setting, replace your SATA AHCI by compatible IDE or SATA port configuration. You can later change back to AHCI AFTER installing your SATA driver.

• What should I do? An operating system not found.

  So, I worked on a toshiba laptop which had said that it needed an operating system so I made a boot disk for windows 8

  Although he said that he could not install on partitions IE. they have the wrong format for windows 8 to install

  So I went to a tutorial on youtube in which I wiped the hard drive and did a new partition for windows but now it gives me a screen with

  An operating system not found. Try disconnecting all drives that are not

  contain an operating system

  Press Ctrl + Alt + Delete to restart

  I have the windows startup disk in Player 8 when I restart, but what I was wondering was that lets say that I replaced the hard drive of the computer that will fix it or should I use cmd to copy files from windows from a USB to the computer?

  Thanks to the one who can help,

  Really.

  Hey really,

  Welcome and thanks for posting your query in Microsoft Community, the best place for all your windows related queries.

  We appreciate you to try the troubleshooting steps to resolve your issue.

  Since you have wiped the hard drive and make a new partition, the operating system would have completely erased. Therefore, you will need to re - install the operating system using the disk.

  As you have already done the Windows restore then, I suggest you perform theast known good configuration. Please see the link below to do so:

  http://Windows.Microsoft.com/en-us/Windows/using-last-known-good-configuration#1TC=Windows-7

  Last known good configuration is a Windows startup option that uses the most recent system settings that worked correctly.

  Hope this information is useful. Do not hesitate to contact us for additional help with the Windows operating system. We will be happy to help you.

  Thank you.

• Satellite A100: operating system not found - error PXE - E61

  After turning on the machine (A100) the following text is displayed:

  Intel boot Agent FE v4.1.18

  PXE - E61: Media test failure, check cable of
  PXE - MOF: boot agent intel coming out
  operating system not found

  I can do or do I have to take it to the dealer for repair? Help, please.

  Hello

  I guess that something with your HARD drive is not really OK. An error message is displayed when the system is unable to boot from the CD/DVD-ROM or HARD disk.

  You have to imagine a sequence (called 'boot-sequence') where all devices that are bootable (such as disk, floppy, CD-ROM, NETWORK drive) are "checked" if some boot media or the program is present. Sequentially, the BIOS attempts to load the next available boot media.

  In the case of no current boot media, the system tries to finally boot from the network that doesn't work not because you´re not connected to a corporate network that has sometimes things network bootable... :)

  So, I suggest you to first check your BIOS (by pressing ESC, then F2) and check the "Boot sequence" if something has changed. Check if the HARD drive is located on the first entry, otherwise set it up. If so, then send your machine a partner / reseller/service because your machine then has a really serious problem.

  Greetings

• Pavilion series 2100 p6: my computer says "operating system not found" Please help me

  I tried to reset my pc because my computer is very slow so I tried, during the reset there were times when he could not reset so I continued to do and then a message showed "an operating system not found. Try disconnecting all drives that do not contain an operating system". Please help me. I really don't much about computers. And I also had windows 10

  Juan8

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to the page of the product HP for your PC, it came not with preinstalled Win10.  THIS means that you have done the upgrade to Win10.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work.

  The problem you mentioned is usually due to one of two basic problems:
  (1) defective hard drive
  (2) damaged/missing bootloader files
  
  As to the first, please follow the instructions in this link to test your hard drive: http://support.hp.com/us-en/document/c00439024
  
  If that confirms that your drive has failed, then you will need to replace it.  Please report back if this is the case.
  
  As for the second, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• Satellite C660 - 10 d Operating System not found PXE - E61: Media test failure

  I have a Satellite C660 - 10 d, which is part of the 1 year warranty which has suddenly decided it won't start and makes a strange noise that sounds mechanical.

  I tried the options F2 & F11 at startup, but I always return to the same messages some options I try:

  Realtek PCIe FE Family Controller v1.23 (28/07/10)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I can't go beyond that and get the laptop doesn't work, which leads to my second problem.

  It is under warranty so I thought I would sign in for repair. The serial number is recognized in the section Product Support My. But when I try to enter in the repair section, it is said

  ERROR: serial not valid number.
  Please check and try again.
  Then gives a number to call which only works weekdays.

  So, I have what appears to be a broken laptop that I can currently connect to repair.
  If you are able to help with one of these problems, it would be greatly appreciated.

  Hello

  I'm quite sure that the problem is related to the defective HARD drive.
  This would also explain the mechanical noise when starting.

  PXE - E61: Media test failure appears as the laptop attempts to boot from LAN.
  Why? Because the disk HARD could not be found and the CD/DVD drive does not contain a startup disk.

  So the BIOS switched to LAN

  This is why replacement of HARD drive should help you with this problem.
  If the warranty is valid, get in touch with a local ASP in your country. Maybe you could get a HARD disk which could be replaced easily

  This is a database with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service partner.

  By the way: this is the beautiful short films hwo to replace a HARD drive:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=116

• ProBook 450 G2, core-i5: operating system not found

  Hello

  I expanded the partition of my C drive with force to upgrade to windows 10 since an iso file... then after restarting, I am facing the problem "an operating system is not found. Please remove storage external use... »

  I tried to boot from the start menu by pressing F9 while restarting, but no solution met! I also tried to boot from EFI file, but does not because no options that are there found.

  The disc is also OK, checked the BIOS settings option.
  
  Now what to do?

  Spoiler (Highlight to read)

  Asif_Ahmed_Joy

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the operating system not found since the Win10 Upgrade failed and tried to help.
  
  One of the things that happened during the upgrade:

  (1) it mostly completed but failed in the writing of the new boot loader files

  (2) it failed early in the upgrade, screw up your PC as well

  Allows to process 1) first - by recreating the bootloader files.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If this does not work, then we are on option 2) - which is not good news.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

  What will work restores your computer to its original factory state using HP recovery media.
  
  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Compac Presario CQ57: operating system not found

  Operating system not found

  Need help with my computer new diagnosis

• Re: Satellite U400: operating system not found then the installation of the OS

  I have a toshiba satellite u400 with is come with VISTA.

  Because I don't like VISTA, I then installed WINDOWS XP with a multi boot.

  Everything worked well. But one day I want to resize my partitions I used Paragon partition manager.
  This product is required to operate only to resize my xp partition, so he asks me a start.

  And then nothing works.

  I try to fix my problem with a fresh install, but it seems that the boot sector was not correct.
  Then I completely format my hard disk on another computer with a USB CABLE.

  When I try to install VISTA, XP or LINUX on a CD or DVD, I ask the multiboot with F12
  I chose to boot from the CD/DVD built-in, but I get only "OPERATING SYSTEM NOT FOUND',

  It's as if the BIOS test the HARD to FIND something specific, and it does not find.
  When my PC worked correctly I could boot from the drive to dvd without problem.

  I called the SUPPORT CENTER of about 10 days, but I have no answer.

  So if someone could help me.

  Thank you.

  Hello

  OPERATING SYSTEM NOT FOUND message appears generally if the laptop has attempted to boot from the HARD drive and didn t find the operating system.

  But I put t understand why you formatted the HARD drive using the USB cable?

  Please insert HARD drive in the Bay of laptops HARD drive and check if the HARD drive is recognized in the BIOS!
  If the HARD drive has been recognised so I recommend you to take a disk Win XP Home and at the start of this disc.

  As I m not wrong not you will need to first install the SATA drivers to recognize the HARD drive.
  The fact is that the laptop supports the SATA controller and SATA drivers are needed to get the HARD drive recognized by Win XP.

  Well, after you have booted from the Win XP disc you need to format the new HDD by using the NTFS file format and should then follow with the installation of the OS.

  Check it out

• HP Pavilion dv2: operating system not found?

  Hi I was wondering if someone can help me that don't know who is wrong. When I turn on my laptop I get ablack screen with the message "The operating system not found" I have never had a disc of windows vista lap top came with it already installed. Also sometimes I have weird message comes as

  642 k RAM suspended system
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow

  I have no idea what to do any help is greatly appricated. Thank you in advance.

  I think you have a faulty hard drive.  If you have not done a backup of your personal data, it will be lost.  You can test the drive by running the SMART of the BIOS test.  If you do not have the recovery media, you will need to buy from HP if it is still available.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Operating system not found on Equium - PXE - E61:Media test failed

  Hi all

  My daughter has a computer satellite laptop running XP.
  However, the system does not start and the following messages:

  PXE - test failed - check the cable for E61:Media
  PXE - M0F: output of the PXE Rom
  Operating system not found

  We do not have a disk operating system.

  What is the problem and how can I do for her?

  Hello

  For me, it seems that the HARD drive is dead and the laptop can not find the installed operating system.
  In this case, he tried to boot from different sources and finally LAN.
  But it does not and therefore, you get the PXE - E61:Media test failure error message.

  In my opinion, the HARD disk needs to be replaced and the operating system must be installed again.

  See you soon