HP nx 6110

Similar Questions

• Fujitsu FI-6110 software driver for mac?

  Hello

  Can someone tell where I can download a free driver for scanner fujitsu fi-6110?

  Fujitsu do not provide a version compatible mac for this model.

  Thank you very much

  James

  of course, Mr. James, I can help... Let me see... Yes, it doesn't have the Mac drivers, so I would say VueScan by Hamrick software, not free, but it seems to be your best optiion now

  Good luck

  John B

• tranfer 6110 impression again 8600

  I have 48 documents qued to my old 6110 printer, now inoperative.   I now have a 8600.  How can I transfer documents qued to the new printer?  What I forget?  Thank you!

  Finally I thought of her.  Thanks anyway.

• HP 6110 All in One printer will not scan to PC applications.

  I have an 6110 all in one printer connected to a HP Pavilion desktop computer running on Vista Home Premium with the MS Office 2007 Suite.  When I try to scan from the printer to MS Word or any other apps, the error message says: "unable to connect to the PC.  However, printing from the PC to the printer works very well and the USB cables are correctly.

  Any ideas?

  Thank you

  ... WSF

  ... WSF

  WSF,

  Can scan you from your pc to the 6110, using the hp scanning software?

• How can reset BIOS Configuration hp Compaq nx 6110

  How can reset BIOS Configuration hp Compaq nx 6110

  Please tell me

• cannot scan of 6110 using maverick

  get a busy year when you try to scan from my officejet 6110 on my mac. Fax works fine.

  Hi jpelmore,

  Oh my God, I assumed it would be always steady and I did not. At my age (undisclosed), I should know better not to assume

  I apologize, it was an oversight on my part.

  Now that you said it, I looked at the supported printers and found this:

  

  Source: Apple Support

  I can't thank you enough for your patients. If you decide that you want to get a newer printer, I would suggest contacting HP because they may be able to offer a discount on a newer model at a reduced cost. The number to call HP is 1-800-474-6836 for the Canada and US or you can Contact HP worldwide.

• Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?

  Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?  If Yes, where is it documented the series cards can do trigger?  For example, is it possible to configure the trigger on the PXI-6124?

  Hi Joel_Neptune,

  The PCI-6110 and other materials as the PXI-6115 S series and SMU-6124 do not natively support NOR-DAQmx analog input alarm. However, you can use one of the generalist counters/timers of the Council to generate a reenclenchees pulse train, then use this as the sample clock pulse train. This transportation example shows how:

  LabVIEW\examples\DAQmx\Synchronization\Multi-Function.llb\Multi-Function-Ctr Retrigg Pulse Train generation for the Clock.vi sample

  In addition, the new material of the simultaneous sampling X series are supported trigger analog input without using a separate task of counters/timers.

  Brad

• How to calibrate the PCI-6110 with NOR-DAQmx

  Hello

  I am a new user of the PCI-6110 Council tries to run the calibration using LabVIEW procedure. I look at the document "Calibration" on the page of the manuals for the Board of Directors,

  http://sine.NI.com/NIPs/nisearchservlet?nistype=psrelcon&NID=11888&lang=us&q=FQL: 28locale % 3Aen % 29 + AND + % 28phwebnt % 3 A 1081 + OR + phwebnt % 3 A 7075% 29 + AND + 28nicontenttype % 3Aproductmanual % 29 + AND + % 28docstatus % 3Acurrent % 29% 20RANK % 20nilangs: en & title = NOR + PCI-6110 + manual

  One of the first steps in the document is to call the AI_Configure command to set the input mode, beach, etc. I'm using LabVIEW 8.5 with the NOR-DAQmx software, and I can not find the command (which, in LabVIEW, seems to be "AI Config.vi") anywhere. The calibration paper was written in 2003, and I gather from Google searches (please, correct me if wrong) that this command is actually a part of NOR-DAQ traditional, who was replaced by driver OR DAQmx.

  My question is this: what is the equivalent to AI_Configure command in the latest software? Is it perhaps a subsequent document describing how to calibrate using NOR-DAQmx?

  Thanks much for any help.

  Tom McLaughlin

  Hi Tom,

  The calibration Procedure series B, E, M, S, which is also linked from this page, describes how to calibrate the PCI-6110 with NOR-DAQmx.

  Brad

• PCI-6111 is recognized as PCI-6110

  I have a Board OR marked as PCI-6111, but when I inserted in a PC, it has been recognized as PCI-6110. Subsequently, none of the inputs or outputs work. The analog inputs still show a flat 10V line, while the exit is blocked to 500 mV. The card go through self-control, however fails self-calibration. Reset of the card does not resolve the problem.

  Based on the images below, what a card 6110 6111? Could he just scored, in which case the card is probably damaged?

  It looks a little dfferent PCI-6111 cards available to us, but perhaps that is a previous model (it had been built, it seems, in 2000).

  Or might pose the problem with inputs and outputs that the PC does not correctly recognize it? If this is the case, is there an easy solution (in relative terms) of the problem, sending to OR for repairs?

  Thank you for reading.

  

  

  

  Filipp,

  Where did you got this card?  It is a very strange problem.  184111 K-01 part number is for a 6110.  The part number 184111 G-02 is for a 6111.  The jury is without a doubt a 6110 as you can see the 2 of the 6111 4 chips on the left hand side related to the 4 channels of the 6110 vs.  So I recommend you all what's wrong with that you send it back in OR for repair.  You can give me a call at 1-866-275-6964 SEO SR #: 1436085 and I can help you through the process of RMA from here.

• Minimum width of the PCI 6110 AI signal

  Hello

  I have a fundamental question on channel PCI 6110 AI.  What is the sample and hold time of the ADC used inside the map? Or how much time I have to keep my constant input signal for the true conversion of data.

  Thank you very much in advance for your help.

  TOROs

  Hi TOROs,

  You can find details on the ADC of 6110 here.

  I hope this helps!

  Bye,.

  Licia

• deterministic segfault in DAQmx libs after 49 days of operations with 6110 OR Linux

  I have a program using a 6110 Council OR through 8.04 DAQmx Linux (Suse 11) of 32 bits. After 49 days of operation at 1 MHz (during which the program sometimes stopped and restarted), a segmentation fault occurs inside certain DAQmx libs, as follows:

   kernel: [4286583.578738] nimxs [940]: Segfault at 11 0053af14 sp 017d00a0 error ip 6 to libnidsadd.so [587000 + 37000]

  or

   kernel: [4286589.134512] nimxs [1134]: Segfault at 11 00561f14 sp 015970a 0 error ip 6 to libmxssvr.so [50d000 + 99000]

  It happened 4 times on two different machines, each time with the same availability of machine.

  After the segmentation fault, the cards can no longer be used and are not displayed in nilsdev.

  Is this a known problem of DAQmx on linux and is there a way to recover the other than restart error machine?

  ... and finally:

  before doing what I did in my last post (stopping services and unloading nation, then by restarting the services), restart the nimxs daemon with

  / usr/local/natinst/Max/sbin/nimxs /usr/local/natinst/max/libmxssvr.so

  does everything works again.

  (if the daemon restarts after modules are reloaded, cards OR do not appear with nilsdev but can not be used).

• HP Office jet 6110: paper close message

  Try to align new cartridges and get the above message. Also try to connect to the new computer running Windows 7.  Cannot cross the stage of cartridges align.  Any suggestions?

  For a 6110 Officejet for aligning the questions see this document.

  The document also covers the issue of the paper too narrow when trying to align the printer. I hope this helps.

• When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

  When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

  [Moved from comments]

  Check with HP tech support to see what your options are.  This is not a Microsoft or issue of Windows.

• Mistake1 right incorrect cartridge in Officejet 6110

  Original title: officejet 6110

  How can mistake1 right cartridge incorrect I fix it

  Hi EricHarold,

  You can check the support of HP at following link and check if it helps.

  Mistakes print cartridge

  If you are always faced with the question, then you must contact the HP support for further assistance.

  Contact HP

  Hope this information is useful.

• synchronize S 6110 PCI and PCI-6250 M series

  I would like to sync between a 6110 S PCI card and a PCI 6250 M acquisition.

  The first question is: do I need a RTSI cable to connect two devices?

  Is it possible to use a single analog trigger (sent to channel the PCI6110 PFI) to start the acquisition on each card?

  I need this information before buying the RTSI cable.

  Thank you very much and sorry for my bad English (I'm Italian).

  Silvia

  I have a problem. I would like to synchronize the acquisition between two serial S PCI6110 and PCI6250 M-series devices. I try to use an example provided by NOR, but it does not work. The master device acquires the signal, the slave does not work. I also use an analog trigger signal to start the acquisition. I enclose my VI. Please, help me. Thanks in advance! Silvia

• where can I find drivers update for hp officejet 6110

  I work with windows xp and I need to update my printer drivers for hp officejet 6110 all in one

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - Printer all-in-one OfficeJet 6110<- set="" for="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=79477&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 6110 all-in-one printer - Product Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=79477&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">