HP OfficeJet 4500 G510n-z impossible to implement

Similar Questions

• HP officejet 4500 G510n-z: impossible scan of pages of the computer

  I'm unable to scan pages from the computer. I replaced the 10 window XP operating system. In the 10 window it is not scanner in my hardware list.

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series-G510/3919445/model/3986394#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Impossible to scan on OfficeJet 4500 G510n-z under 'Windows 7 starter' - installation problem?

  Recently bought OfficeJet 4500 G510n-z and installed the SW CD on laptop Toshiba running Windows 7 Starter - NOTE when installing the SW printer I have had only a single option enabled: "install the minimal SW.

  How and what SW that I need to install to enable support of the san on this laptop?

  FYI:-I also installed this same SW HP on the Windows XP laptop and I am able to scan documents to this computer (in this case, I believe that I chose to install it "Full SW" option that has been disabled during the installation of Windows 7 Starter.)

  Could you provide links and instructions for essences SW install to support scan on Widows 7 Starter function?

  Using the Starter edition, you can scan sing Windows Fax and Scan:

  Use one of the following methods to scan a document.

• HP Officejet 4500 G510n Scan via airport utility?

  How can I get my HP Officejet 4500 G510n to perform a SCAN using airport utility?

  Airport utility is not related to operating an MFP. It there is no scan via airport utility function or any what router airport. That is, the printer must be connected through its network and NO USB connection to the router. What is the Airport base station is the printer is simply a network client. No printer function any is active via the airport.

  You must install the drivers HP and the complete software for any OS that you are running on your computer.

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/mod ele/3986394/document/c0...

  It's the HP drivers and software that will allow you to scan over network. Or if NOT, maybe... often scanning on network is problematic.

• Scanning on HP Officejet 4500 G510n-z problems

  I have a HP Officejet 4500 G510n-z. I am currently on wireless and able to print without problem. However, when I try to scan, the display shows "NO Scan option. Refer to the documentation for the device to get out of trouble. Documentation of currency is not on the analysis of the questions and when I use the help function in the printer it tells me that there is "no computer connection. I have all set up and work wireless. Help, please! Thank you!

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

  If this isn't the case, you may need to reinstall the complete star driver.  What is your operating system?

• mirror printing with an HP Officejet 4500 G510n-z?

  Can I mirror printing with an HP Officejet 4500 G510n-z?  I don't see the option in the print properties.  just need a confrim.

  Thank you!

  Kath22, it is not a feature available for this model.

• OfficeJet 4500 G510n: I can not install my printer portable officejet 4500 G510n after updating windows 10

  Help please.  I tried for days install my portable printer officejet 4500 G510n to my PC G wireless that runs 10 recent Windows updates.  I tried everything, including the uninstall/reinstall but it is never successful and I understand the different problems every time.  I even tried setting up by USB... always without success.  I don't understand what is the promlem.  AND when I use one of the programs that install fails, it installs a solution for me for windows 8, which does not, of course, because I have 10. I really wish I had a printer again!

  Welcome to the @DLBHJ forums

  I hope to help with installation issues you are having with your Officejet 4500 on Windows 10. Here are some steps to start you off. When you are finished, just reply to me with the results, errors, etc. Any information you can provide will help!

  1 uninstall all printer software that is currently installed.

  2 restart the printer and the computer entirely.

  3. clean boot the computer and restart it: How to clean the boot

  4. when the computer restarts, download and install the software here.

  5. once the printer installed, return to the boot process and re - activate the start up programs.

  I hope this helps and works. Let me know what happens.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Officejet 4500 G510n-z hp Solution Center: does not install

  Recently updated for laptop with windows 8.1.   I have an officejet 4500 G510n-z.  The computer recognizes the printer and print.  My main problem is that I can not get the hp solution center appears.  Without it I can't scan.  The intall disk is outdated and I tried many downloads of software and the doctor print and scan without result.  Any ideas would be greatly appreciated.

  Hello cpilo1,

  You must use the full driver for your printer. Download the driver below and install it please.

  http://support.HP.com/GB-en/drivers/selfservice/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/model/3986394#Z7_3054ICK0KGTE30AQO5O3KA30R1

• OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z

  I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes to the queue from print, then disappears. The printer is not composing or anything; the document will just in the bit bucket, without error, not even in the case log.

  Other relevant details:

  • I tried reinstalling the drivers; After several hours the skin of HP software, I did.
  • The laptop has 3 printers associated with my physical device: 2 printers generically named ' HP OfficeJet 4500 G510n-z ' and ' fax HP OfficeJet 4500 G510n-z "; and "HP # (HP OfficeJet 4500 G510n-z) ' (where # is a hexadecimal number of device-specific, I'm not willing to share here). The third argument prints correctly to the book.
  • I can scan documents through the HP Support Center application.
  • Copy and fax work correctly to the device itself. For example, if I have first print the thing, I want to fax, then by fax using the document feeder and the front of the device, it connects and sends the fax correctly.
  • The last time I checked, I was able with a fax in a program on my archaic Macintosh.
  • To repeat the foregoing, no errors are displayed or saved. Each attempt appears in the Fax as "Completed." log I don't want to get all the answers canned on the subject, thank you very much.
  • I browsed this forum of the community and support site and tried what I could find and understand how to do in Windows 10 of bugs. (Disclaimer: I've always been a Mac person and a VMS/Mac/Linux software developer, to try to understand how to do something which expected to be simple in Microsoft mess was not easy for me.) It is not suggested with a laptop given to his wife by a friend, however.)

  What unconscious thing [sic] I'm missing?

  Hello

  Please, look at the next post and make a good choice:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

  Kind regards.

• OfficeJet 4500 G510n-z: HP Office Jet 4500 G510n-z fails to print over wireless network

  Hello

  Earlier my XP (Dell D620) machine stopped printing wireless with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly without any problem. I have download the current HP drivers without result. I looked at other positions, but none of the viable solutions. The 4500 G510n-z appears as a printer, but all print jobs end with an error. I can't print a test page, Notepad, etc. All jobs appear on the queue, but they all error. It seems to be a specific problem of the XP. I have XP pro version 2002 Service pack 3. My network is just a Verizon Fios wireless router. In windows 7, I can see the actual address of the Hp wireless connection when the printer is added. Under Xp I do not see the address wireless when I try to add the printer. Now, it appears in the list of printers on XP but 7 seems to see the actual address wireless and allows me to select it to add the printer. I plugged the XP machine to the printer and it would work for a while then stops working. Don't know what triggers the loss of connection. How can I specify the connection 4500 G510n-z XP? I tried to add the IP address I see on my 7 machine but XP wants to a path of the server which is //server etc., UNC path.

  I went in the properties of the printer and changed the address to match the 7 IP 192.168.1.3 192.168.1.9 Windows 7 XP, but not go again.

  Thank you

  Al

  Hello @adb1779,

  Thanks for getting back to me on this subject. Because the ping tests on both computers is successful when communicating with your wireless printer, it turns out that you do not encounter a network issue at all. On the contrary, there is either a program of 'blocking' of printing wirelessly on your XP computer or computer XP is not "like" the fact that you have changed the IP address of 192.168.1.3 to 192.168.1.9. It would seem that your XP computer is a former connection with the printer. To resolve this problem, please follow the steps below.

  Step 1: Launch MSCONFIG:

  I'll have you temporarily disable all programs background on your XP system to see if there is a program that runs in the background on your Windows XP computer that would block communication with your printer.

  1. Click on the Start menu
  2. Click run. In the Run dialog box, type msconfig and click OK
  3. When the System Configuration window opens select 'Selective Startup ' and uncheck load startup items
  4. Click the Services tab, check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  When your Windows XP computer turns please try printing. If the printer works correctly now it would mean that a program was blocking the communication. If the problem persists, proceed to the steps below.

  Step 2: Uninstall the drivers:

  I understand that you have already done this in the past without result. However, if your product is identified as on 192.168.1.3 she is not installed correctly, or an earlier version of the printer with an old IP isn't be properly removed from the system. It is crucial for the repairs we have a clean slate to work with. Please follow the steps below.

  1. Click on the Start menu
  2. Click on programs
  3. Select the HP folder
  4. Select your HP Officejet
  5. Select Uninstall
  6. Please follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 3: Clear the server properties:

  Your printer driver can also be installed under the print server properties. I'll have to make sure your driver has been completely removed from both print server.

  1. click on the Start menu

  2. Select Printers. You may need to go to the Control Panel then Printers and faxes.

  3. in printers and faxes click on file and select Server properties

  4. in the print server properties window, select the drivers tab

  5. If your HP Officejet is listed, click on it and select Remove downstairs.

  6. a new window opens, click on Remove only the driver. Click OK.

  

  7. Select apply and then OK in the print server properties window.

  8. close printers and fax machines.

  Step 4: Delete the temporary files:

  1. Click on the start menu
  2. Select run. In the Run dialog box, type %temp% , and then click OK
  3. Click on the Start menu
  4. When the Temp folder opens, Select the first item in the Temp folder and tap the SHIFT key on your keyboard.  Now Shift while, scroll down a few lines and click on another element in the file. What is between these two elements will highlight.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. If a Temp file be used yet that you will automatically get the pop-up that you can't delete this item. The "deletion" process is cancelled. On Windows Vista, 7 and 8 of Windows you can just "jump" from the items which will not delete. Unfortunately, on Windows XP, it is not so easy. Take note of this point is unable to delete. Then, ignore this element. Click on the next element in the list, hold the SHIFT key and click another item in the list to remove another piece of elements. You will continue this tedious step until all items in the Temp folder which will remove are deleted.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 5: Reinstall the drivers:

  1. Please click here to download the drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the instructions on the screen to reinstall your printer wireless
  4. Once your printer is properly reinstalled please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• How to connect my HP Officejet 4500 G510n-z to work wireless.

  I recently bought the HP Officejet 4500 G510n-z, I connected it to my netgear router I can see that it is through netgear genius, but my computer does not connect. I tried disabling my firewall, I uninstalled and reinstalled several times. still no luck but when I run the test through the printer wireless, she spends on everything. I tried to find a way around for 427 udp but I couldn't know.

  Connected through wpa - psk

  Windows 7

  Acer laptop

  Please help me, I have school from 5 days.

  Thank you

  Oh, that's a good clue.  This instance of the printer is looking for a USB connection!  Go to control panel > printers & devices and delete the printer in the printer list.

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP Officejet 4500 G510n-z: printer will print in black ink only?

  HP Officejet 4500 G510n-z will print with no colour ink installed sorting?

  Jim

  Read the guide to HP here, it does not appear that the Officejet 4500 supports backup mode "ink" that would print with a single cartridge installed.

• printer Officejet 4500 G510n: hp officejet all-in-G510n problem printer 4500 software download and driver

  When I download the software and drivers for the officejet 4500 G510n, and the attempt to extract the file it will not open indicating that the file is corrupt.  I tried several times with my AOL and Internet Explorer browser.  Suggestions, thank you.

  Thanks a lot, this solves the problem

• HP Officejet 4500 G510n-z for windows 7

  This printer works wiyhout no problem, then all of a sudden he is no longer scan, copy or fax. Notice of default appears in the display.  It will still print computer.  I have reset the printer and you have done everything I know to do.  need help!  Puzzled-1

  My HP Officejet 4500 G510n-z ceased to print certain documents from my computer. It allows to print an e mail but not my bank statement

• scanner HP officejet 4500 g510n Readiris (OCR) does not yet recognize will scan using hp OCR

  Greetings,

  OfficeJet 4500 g510n wireless, windows 8, readiris pro 14.

  OCR, scanning works fine using the ocr software supplied with the cd printers.

  Readiris is no Twain especially for the 4500 but has "hp twain others."

  I've uninstalled and reinstalled the TWO printing software and the readiris program

  Readiris refuses to recognize my printer "failed to open the default Twain source" and "the scanner is not responding.

  Readiris support has not responded to my request sent 5 days ago - makes me wonder if their software is the same as their 'support' - pretty useless!

  any suggestions please

  Concerning

  The way I understand it, readiris works that on HP scanners or all-in-One printers offer no OCR software. He added this feature for scanners and printers who have not already. As the 4500 has already built an OCR software, readiris software will not work. I'm not 100% certain about it, as I've only dealt with the OCR of HP software, but what I've read, that's my understanding.