Officejet 4500 G510n-z hp Solution Center: does not install

Similar Questions

• HP OfficeJet Pro L7590 all-in: Solution Center does not

  We have three computers running Windows 10.  On two of them, the Solution Center will not load.  Click on the desktop icon and the image of the Cluster Solution flashes briefly and disappeared.  We use Windows 10 for several months now and have used the solution Center on all three computers (with Windows 10) up to two days when I tried to use it and it would not load.  I buy best Geek Squad support and yesterday an agent has spent more than 4 hours trying to solve the problem and could not managed to open.  The final suggestion is to take it to the Geek squad in store for "an update of the operating system and reinstalling the HP drivers on a fresh operating system."  I really don't want to do that.

  The print function works very much like the copy feature.  Do not use the fax machine.

  Any ideas anyone?

  I have the same problem. It just started a couple of days.

  If anyone has a resolution please write me.

• HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

  Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

  Hello

  Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
     
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• HP Solution Center does not work after installing Windows 10.

  After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

  Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

  Or, is there a way to fix it?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• button to fax on the HP Solution Center does not

  OfficeJet Pro 8500 A909g. Windows 7 Ultimate 64 bit. The button of the fax on the HP Solution Center does not work. This happens periodically. How to repair? Is there a solution long term for this bug?

  If you finish this fax and had then press the fax button in the software does for much longer?  The next time you get this situation, try to restart the computer and check if the button responds more quickly.  You might see a question of resources of the computer if the computer is turned on for long periods.

• OfficeJet 6500 Solution center will not install/help files missing

  Hey community:

  Have tried several times to install Officejet 6500 with the solutioncenter does not.  When I click on the icon to get an error message that the solution center was not installing correctly.  I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.

  All proposals/solutions.  Am disappointed right now with the Hp Printer.  Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.

  In addition, I don't have the help files to set up the printer.  Any help on that would be great.

  There could be two questions

  1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software

  2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.

• Lenovo T420 3.2.002 Solution Center does not display tile system

  Hello

  I have a T420 running Windows 10 with CSL 3.2.002 injstalled. The Solution Center does not show the System tab, and so I can't do anything with it. Any suggestions?

  

  Yes,

  Lenovo came out with updates and the latest version of the Solution Center (3.0.0.3 from the website) and 3.0.0.4 upgrade all issues resolved.

  Hope this helps.

  See you soon,.

• I have a Photosmart Premium c410 series. My hp Solution Center does not work, I can't scan.

  Operating system is Windows Vista, the error message says to reinstall the printer using the installation disc.  (I did several times).  Really need to scan, but don't know how.  States of printer to the computer.  This is not the case.  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello judieKay

  Would you please provide the full model number? For example C410a. Some models are slightly different from each other and I want to assure you to give you specific information. How can I find my model number?

  Regarding the error, I checked and the following instructions should work on all models of the C410. The following instructions are for the "cleansing" or "cleaning" your computer HP printing software. This should allow you to perform a new installation of your printer and should fix your mistakes.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

• Photosmart e-all-in-one B110a: HP Solution Center does not open

  This problem began in late December 2015.  HP Solution Center worked fine until then.

  Now the printer works well, but the HP Solution Center does not open, so can not scan to computer or check ink levels.  Tried to uninstall the KB3132372 update [as suggested in this forum] and then everything works.

  However, the update (KB3132372) maintains the re-setup and hit the Centre of HP solutions again.

  Is there something wrong with the KB update that disrupts the HP driver?

  Is that what I can do through a permanent solution? (other than uninstalling KB3132372 immediately prior to scanning)

  Thank you.  Problem solved.  I admit I was a little uncomfortable uninstall security updates - but everything is OK now.

• Photosmart 6525: HP Solution Center does not work in Win 10

  I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

  Hello

  The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

  The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

  As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

  http://support.HP.com/us-en/document/c02463264

  Kind regards

  Shlomi

• HP Solution Center does not work and I can't download it despite many trials

  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello todd999

  Try instead these instructions:

  Follow the steps below to rub the software and then reinstall it.
  1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
  2 download the full feature software and drivers
  Photosmart C7250 software (Windows 7)

  3. double-click on the downloaded file to extract the files
  4. once the software install window press Cancel or Exit to close the Setup program
  5. type % temp % in the field run or search programs and files.
  6 find the starting with 7z folder (example: 7zS2356)
  7. right click on 7z file and choose copy
  8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
  9 open the 7z folder
  10 open the Util folder
  11 open the CCC folder
  12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
  13. when the software has been removed, restart your computer
  14. run the Accessories\ System Tools Disk Cleanup
  15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
  I would like to know if you still have the same issues?

• HP f4210 Solution Center does not open

  I have tried to scan pictures and now cannot start the solution center to do this. I just uninstalled the program and reinstalled. When I try to start the program, nothing happens. No additional processes appear in the Task Manager. I rebooted the computer since the reinstall twice.

  Thank you, Scott

  Hello PinballDr,

  Welcome to the HP Forums!

  I understand that the Solution Center does not open. I will do my best to help you! First of all, I need to know:

  What is your operating system on your computer? Windows.

  I would recommend this utility called the print and scan Docotor. This helps solve printing, scanning and connectivity problems, including Diagnostics: (this information is declared here.)

  • Connectivity:

• HP Solution Center does not detect that I've added a second printer

  I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

  HP Solution Center recognizes my HP 2575 x, and everything works.

  But now I have an extra F4280 HP I want to add in via the USB port on the computer.

  First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

  Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

  Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

  I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

  How can I know the HP Solution Center to detect and add my new printer?

  Thank you.

  When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• HP Solution Center will not install

  I installed the F4180 Deskjet on my Windows 2000 computer.  Printer works fine but I wanted to check the ink levels and could ' t find the HP Solution Center software.  No registration under program files.  So I released the CD and tried to install again.  There was never an indication that he was installing the Solution Center or HP photosmart software.  So I clicked on run and entered in D:/Setup/SolutionCenter.  It finds the file solutioncenter.msi and a list of zip files that are identified as central to solution.  I have dbl. solutioncenter.msi-click and I get the message "Setup has encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2732. "So I uninstalled everything and only reinstalled under mode in advance where I am supposed to be able to approve all items being installed.  Well it has finished installing and the last screen said there may be additional screens that appear to guide you through the intstallation of additional software.  No screens never not appeared, and I still haven't installed HP or HP Photosmart software solutions Center.  The CD is damaged?  How can I get this software?

  Thanks for your help.

  The Solution Center will not install on Windows 2000. It is not a bug/problem, but that's just the way it was designed (don't ask me why). If you need to check the ink level, then you have to go to the Toolbox of the printer on the printer properties page.